You are on page 1of 125

SAUDI ELECTRICITY COMPANY

Engineering and Generation Projects Sector

Approved Vendor List

Sunday, May 10, 2015

Page 1 of 100

General Instructions

1. This document (Approved Vendor list) has been developed by Generation Project Engineering
Sector- Engineering Department.
2. All procurements shall be made by Contractors/Subcontractors according to the approved list.
3. The Contactor shall ensure that all his selected vendors should have valid ISO 9001 QC
Certificate for particular facility and equipment while commencing procurement.
4. The procurement outside the approved list shall not be allowed. However, in special cases such
as for example (Approved manufacturer decline to quote, requested product not listed in the AVL
) the EPC Contractor shall send Product PQ request to the concerned Execution Dept, describing
the circumstances and enlisting the reasons for not utilizing the SEC approved vendor list. The
concerned Execution Dept. shall thoroughly scrutinize the validity of the contactor request. In case of
valid reasons and considering impact on the progress, fill the PQ request (form 7.12) and send it to
Generation Technical Qualification Division ENGTQDV@se.com.sa
5. Approval / disapproval by COMPANY of prequalification vendor / manufacturers documents shall
not relieve the CONTRACTOR from his obligations under the Contract.
6. The manufacturer listings shall be interpreted in the following manner:
6.1 Manufacturer listed with the word "None" as a "Limitation". All products from the manufacturer in
the given category are acceptable.
6.2 Manufacturer listed with a "Limitation": Only the product that meets the "Limitation" is
acceptable. If noted as being manufactured "Under License, only products made under the terms of
the license agreement are acceptable.
6.3 Manufacturer is listed with a specific "Location: Only products made in the specific location or
area(s) are acceptable.
7. Company reserves the right to revise the Approved Vendors List (AVL) at any time prior to
submission of the Bidders Commercial Proposal, however, this is only applicable to foreign
companies. In terms of local companies, and regarding of ITB [General Instruction for Preferred
Procurement], this restriction does not apply and as such the Company reserves the right to revise
the AVL at any time during the project life cycle (i.e. Bidding stage, contract award, project
execution, commissioning and final close out), in order to cater for local procurement. Moreover, the
Companys Qualification Division is the only body authorized to revise the AVL as per Companys
internal policies and procedures.

Sunday, May 10, 2015

Page 2 of 100

Main Category

Air Compressor

Sub Category

AIR COMPRESSORS
Limitations/Conditions

No

Contractor Name

Location

5025

COMPARE DRUCKLUFlTECHNIK GMBH

USA / Germany

5219

ATLAS COPCO

Antwerp, Belgium

5220

INGERSOLL RAND

USA

5222

SULLAIR

USA

5224

COOPER/JOY INDUSTRIES

USA

5225

DRESSER RAND

Singapore

5227

AERZEN NSA CORP.

USA

5228

SUNDYNE COMPRESSORS

USA

5229

KAWASAKI HEAVY IND. LTD.

Japan

5230

AC COMPRESSOR

USA

5232

UNIVERSAL COMPRESSION

USA

11454

Cameron Compression Systems

USA

No Limitation

Limitations/Conditions

Main Category
Sub Category

Ash Handling System

Ash Handling System

No

Contractor Name

Location

9314

NOL-TEC

USA

9406

Lodge Cottrell Limited

United Kingdom

Main Category
Sub Category

Auxiliary Boiler

AUXILIARY BOILER

No

Contractor Name

Location

5151

BABCOCK & WILCOX

USA

5152

NEBRASKA

Country of origin is
subject to SEC
approval

Sunday, May 10, 2015

Limitations/Conditions

Page 3 of 100

Main Category

Bar Screen

Sub Category

Bar Screen Grab

No

Contractor Name

Location

Limitations/Conditions

9758

Hyorim Industries Inc.

Korea

Model : Rake Trash Rake


Channel Width 1 - 6 meter ,Bar Pitch
40 - 150 mm
Traversing speed 9 m/min Design
Hoisting Capacity 2000 kg Debris
Hopper Capacity 2m

Sub Category

Bar Screen Gripper

No

Contractor Name

Location

Limitations/Conditions

9759

Hyorim Industries Inc.

Korea

Model: Rake and Monorail


Channel Width 1 - 6 m , Bar Pitch 40 150 mm
Grab Width 1.2 - 2.5 m
Design Hoisting Capacity 500 - 3000 kg

10476

Bahra Advanced Cable Manufacture Co.


Ltd.

Korea

Model: Rake and Monorail


Channel Width 1 - 6 m , Bar Pitch 40 150 mm
Grab Width 1.2 - 2.5 m
Design Hoisting Capacity 500 - 3000 kg

Sub Category

Rotary bar screen

No

Contractor Name

Location

Limitations/Conditions

9761

Hyorim Industries Inc.

Korea

Channel Width: 1.5 - 4.5 m , Bar Pitch:


10 - 150 mm
Pitch of carrying chain: 250 mm

Sub Category

SEA WATER TRAVELLING BAND SCREEN

No

Contractor Name

Location

5180

GEIGER

Germany

5181

E. BEAUDREY

France

5182

FAI OFFICINE

Italy

5183

OVIVO (BRACKETT GREEN)

United Kingdom

5184

PERRIER SEREM

France

Sunday, May 10, 2015

Limitations/Conditions

Page 4 of 100

8738

Hyorim Industries Inc.

Korea

Channel width : 1.5 - 7 m , Mesh size :


1.0 - 10 mm
Capacity: 45,000 m/h.
Channel depths of up to: 15 m
Design :Centre Flow ,Inline Flow, Dual
Flow

8973

HUBERT STAVOREN B.V.

Netherlands

Channel Width : up to 4 m , Capacity:


45,000 m/h.
Channel depths of up to: 15 m
Design :Centre Flow (CF) ,Inline Flow
(IF),Dual Flow (DF)

Main Category

Battery Charger/UPS/Power supply system

Sub Category

BATTERY CHARGER

No

Contractor Name

Location

6847

CYBEREX

USA

6857

C&D

USA

6861

EXIDE TECHNOLOGIES

USA

6881

SAFT POWER SYSTEMS SAS

France

6887

Emerson Network Power Industrial


Systems

France

6894

SAFT AB

Oskarhamn,
Sweden

6897

COM 10 INTERNATIONAL PTY. LTD.

Australia

6899

AEES

France

6901

BENNING

Germany

6903

EMISA (ELECTRO MERCANTIL INDUSTRIAL


S.A. SPAIN)

Spain

6905

ERSKINE

United Kingdom

6906

GUTOR ELECTRONICS LTD.

Switzerland

6907

CONSTANT POWER MANUFACTURING CO. USA

6908

SOLID- STATE CONTROLS INC.

USA

6909

THEO-BENNING

Germany

8710

JEMA Energy S.A

Spain

Sub Category
No

-(10) Years Extended


guarantee/warranty certificate.

Battery Charger/Rectifier

Contractor Name

Sunday, May 10, 2015

Limitations/Conditions

Location

Limitations/Conditions
Page 5 of 100

8961

CEG Elettronica Industriale S.p.a

Italy

1-Battery Charger/Rectifier Model UBC


Series.2. All parts & components shall
be procured from CEG group-Italy
manufactured. 3. Ten years extended
warranty shall be applicable to:- All
supplies directly or through supplier.Design defects & manufactur

8968

BORRI S.P.A

Italy

-Battery Charger / Rectifier Model RTB.e


-Extend warranty shall be applicable to
all supplies dirctly or thrugh supplier.
-Ten (10) years warranty shall be
applicable for first project and reduced
yearly for subsequent project awards.

9329

HBL Power Systems Ltd,

India

Battery Charger/Rectifier

10415

JEMA Energy S.A

Spain

-(10) Years Extended


guarantee/warranty certificate.

11300

ARABIA POWER ELECTRONICS COMPANY


(APEC)

Saudi Arabia

Conditions:
Only assembly. However, the
components
shall be from West Europe or North
America.
- Up to120 A DC only.
- Natural cooling system.

Sub Category

BATTERY CHARGER: BATTERY CHARGER, 48 VDC

No

Contractor Name

Location

6862

EXIDE TECHNOLOGIES

USA

6882

SAFT POWER SYSTEMS SAS

France

6888

Emerson Network Power Industrial


Systems

France

6898

COM 10 INTERNATIONAL PTY. LTD.

Australia

6900

AEES

France

6902

BENNING

France

6904

EMISA (ELECTRO MERCANTIL INDUSTRIAL


S.A. SPAIN)

Spain

6910

BRAGA MORO

Italy

6911

HAMMER & SIMMONS

United Kingdom

6912

T.D.I

USA

Sub Category
No

MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS

Contractor Name

Sunday, May 10, 2015

Limitations/Conditions

Location

Limitations/Conditions

Page 6 of 100

7456

NEST OY/NAPS

Sub Category

FINLAND

UNINTERRUPTIBLE POWER SUPPLY SYSTEM (UPS)


Limitations/Conditions

No

Contractor Name

Location

6848

CYBEREX

USA

6850

GUTOR ELECTRONICS LTD.

Switzerland

6852

POWERWARE

USA

6913

SOLID-STATE CONTROLS INC. (AMETEK)

USA

6914

ALCATEL / AEG SAFT

Germany

6915

Emerson Network Power Industrial


Systems

France

9407

CEG Elettronica Industriale S.p.a

Italy

1. UPS Model AC U1 / AC U3
Series.Series.2. All parts &
components shall be procured from CEG
group-Italy manufactured. 3. Ten years
extended warranty shall be applicable
to:- All supplies directly or through
supplier.- Design defects &
manufacturing

9829

BORRI S.P.A

Italy

- UPS Model E 2011e


-Extend warranty shall be applicable to
all supplies dirctly or thrugh supplier.
-Ten (10) years warranty shall be
applicable for first project and reduced
yearly for subsequent project awards.

10352

ARABIA POWER ELECTRONICS COMPANY


(APEC)

Saudi Arabia

Conditions:
Only assembly. However, the
components
shall be from West Europe or North
America.
- Up to 30 KVA only.
- Natural cooling system.

10416

JEMA Energy S.A

Spain

-(10) Years Extended


guarantee/warranty certificate.

Main Category
Sub Category

Boiler

BOILER MANUFACTURERS

No

Contractor Name

Location

166

Ansaldo Caldaie S.p.A

Italy

5105

Mitsubishi Hitachi Power Systems (MHPS)

Japan

Sunday, May 10, 2015

Limitations/Conditions

Page 7 of 100

6555

BABCOCK & WILCOX

USA

6556

Amec Foster Wheeler

Clinton NJ, USA

6557

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

8686

IHI

Japan

Sub Category

BOILER DRUM
Limitations/Conditions

No

Contractor Name

Location

6445

B&W

Canada

8678

ULP Co. Ltd.

Korea

1-Manufacturing in Korea.2- ULP Co


Ltd Issue Inspection and Test Plan
Detailing all of the Manufacturing and
Test Activities and Approval by SEC Prior
to the Start of Manufacture.

8679

Kangrim Heavy Industries Co. Ltd.

Korea

Manufacturing in Korea

8947

Daechang HRSG Corporation

Korea


All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM

All sizes and wall thickness up to 110
mm

Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

9705

ZAMIL STEEL INDUSTRIES PED

Saudi Arabia

For HRSG applications for combined


cycle

10076

GS Entec Corp.

Korea


All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM

Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Sunday, May 10, 2015

Page 8 of 100

10081

S&T Corporation

Korea

11029

Unimit Engineering

Thailand

11305

AL ZAMIL HEAVY INDUSTRIES LIMITED

Saudi Arabia

Sub Category


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

- Design pressure: 97 bar, diameter:


2083mm, length: 11,582 mm, thickness
81mm (which corresponds to ASME
VIII Div 1 & 2 pressure vesseis 60 mm
thick and above)

BOILER FABRICATION SHOPS

No

Contractor Name

Location

Limitations/Conditions

8689

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Danang, Vietnam

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9524

Amec Foster Wheeler

China

- As fabrication shop only for the


following components: (Headers,
Superheaters, Reheaters, Economizer
and Vertical Walls)
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Sunday, May 10, 2015

Page 9 of 100

9842

BABCOCK & WILCOX BEIJING CO. LTD


(BWBC)

China

- Components to be fabricated following


ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9855

MHPS (Philippines) Inc.

Philippine

-As a fabrication shop only for BOILER


PRESSURE PARTS
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9887

Yantai Hyundai Heavy Industries Co.Ltd

China

-As fabrication shop only for the


following
components:(Headers,Superheaters,Reh
eaters,Economizer and Vertical Walls)
-All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM
-Componets to be fabricated following
ASME procedures and shall bear ASME
stamp.
-All sourced materials shall be as per
ASME,ASTM,DIN,BS or JIS
-All materials above grade 22 shall be
sourced only from West Europe USA or
Japan.

Sunday, May 10, 2015

Page 10 of 100

10563

Foster Wheeler

Poland

- All engineering and design must be


done by approved OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10581

IHI PT. CILEGON FABRICATORS (IHI


Corporation)

CILEGON
,INDONESIA

Only for (1) Header with material SA106,


SA335, P12 & P22 and (2)Furnace
Vertical wall panel with material SA210
- All engineering and design must be
done by approved OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Sub Category

BOILER STRUCTURAL STEEL

No

Contractor Name

Location

4898

HIDADA LTD.

Saudi Arabia

4902

AL ZAMIL HEAVY INDUSTRIES

Saudi Arabia

4903

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

8332

GULF STEEL WORKS

Saudi Arabia

8433

Energya Steel Solutions

Saudi Arabia

11088

Zamil Structural Steel Co

Saudi Arabia

Sub Category

- Only as fabrication shop


- In case of contract award the vendor
shall
assign an approved NDT third party
body to SEC for inspection in addition to
project's requirements.

FIRED HEATERS: BOX TYPE FURNACE

No

Contractor Name

Location

4768

Mitsubishi Hitachi Power Systems (MHPS)

Japan

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 11 of 100

4884

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

4907

Amec Foster Wheeler

SORSICA, IT

4992

NIIGATA ENGINEERING CO., LTD.

Japan

4994

COOPERHEAT UK, LTD.

United Kingdom

4995

SITICEM MONTAGGI-E MANUTENZIONI


SPA

PISA, IT

Sub Category

FIRED HEATERS: DIRECT FIRE FURNACE

No

Contractor Name

Location

4762

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4881

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

4905

Amec Foster Wheeler

Italy

4908

G.C. BROACH COMPANY

USA

4910

TAKAHASHI IRON WORKS CO., LTD.

Japan

Sub Category

FIRED HEATERS: FURNACE, INDIRECT FIRED

No

Contractor Name

Location

4763

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4825

KCC PROCESS EQUIPMENT, LTD.

SUNBVRY-ONTHAMES

4882

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

4906

Amec Foster Wheeler

Italy

4909

G.C. BROACH COMPANY

USA

Sub Category

Limitations/Conditions

INDUSTRIAL BOILERS: FIRE TUBE BOILER AND COMPONENTS

No

Contractor Name

Location

4679

SANTAZ-CENSA S.A.

PORRINOPONTEVEDRA, ES

4742

AALBORG CISERV INTERNATIONAL A/S

Germany

4832

TECHNOTHERM CORPORATION

USA

4868

BILFAL Heavy Industries Ltd

Saudi Arabia

4873

WELLMAN ROBEY, LTD.

United Kingdom

4875

MITSUI BABCOCK

RENFREW

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 12 of 100

4880

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

4887

MITSUI SHIPBUILDING

Japan

Sub Category

INDUSTRIAL BOILERS: PORTABLE AND MOBILE BOILERS

No

Contractor Name

Location

4877

MITSUI BABCOCK

United Kingdom

Sub Category

INDUSTRIAL BOILERS: WATER TUBE BOILER

No

Contractor Name

Location

4713

KAWASAKI HEAVY IND., LTD.

Japan

4743

AALBORG CISERV INTERNATIONAL A/S

Germany

4761

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4833

TECHNOTHERM CORPORATION

USA

4869

BILFAL Heavy Industries Ltd

Saudi Arabia

4874

WELLMAN ROBEY, LTD.

United Kingdom

4876

MITSUI BABCOCK

RENFREW

4888

MITSUI SHIPBUILDING

Japan

4891

STORK ENERGY

Netherlands

4892

CERREY, S.A. DE C.V.

MON TEXRENY, MX

4893

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

Sub Category

Contractor Name

Location

5128

CCI

USA, Switzerland,
Sweden, Austria

5283

EMERSON/FISHER-ROSEMOUNT CON-TEK

Country of origin is
subject to SEC
approval

6425

DRESSER AL-RUSHAID

Saudi Arabia

6430

FISHER CONTROLS INC

USA

10147

Nihon Koso Co.

Japan

Sunday, May 10, 2015

Limitations/Conditions

STEAM CONDITIONING VALVE (ATTEMPORATORS) - CONTROL VALVES;


DESUPERHEATING

No

Main Category

Limitations/Conditions

Limitations/Conditions

Boiler Air Preheater

Page 13 of 100

Sub Category

BOILER- REGENERATIVE AIR HEATERS

No

Contractor Name

Location

6471

HOWDEN POWER

United Kingdom

6528

Mitsubishi Hitachi Power Systems (MHPS)

Japan

10861

Burmeister & Wain Energy A/S (BWE),STF

Denmark

Main Category

All Sub vendors for the main parts shall


be approved by SEC.

Boiler Circulating Pumps

Sub Category

BOILER CIRCULATING PUMPS

No

Contractor Name

Location

10669

TORISHIMA PUMPS mfg. Co. Ltd.

Japan

Sub Category

Limitations/Conditions

BOILER CIRCULATING WATER PUMPS

No

Contractor Name

Location

5123

KSB

Germany

5168

HAYWARD TYLER UK

United Kingdom

Main Category

Limitations/Conditions

Limitations/Conditions

Boiler Feed Pumps

Sub Category

BOILER FEED PUMPS AND MOTORS for Combined Cycle Power Plant
Limitations/Conditions

No

Contractor Name

Location

5049

MITSUBISHI

Japan

5083

KSB, INC

Germany

5084

SULZER PUMPS

Germany / United
Kingdom / France

5088

FLOWSERVE

France, United
Kingdom & Austria

5095

EBARA

Japan

5100

HITACHI

Japan

8406

Hyundai Heavy Industries co., LTD.

Korea

Model HMR, max flow 700 m3/hr Total


head ~ 1800 meters.

8439

Flowserve- Coslada

Spain

Modeles (WXH,CSB,CHTA/DSB,DMX)

8736

TORISHIMA PUMPS mfg. Co. Ltd.

Japan

9529

Hyosung GoodSprings, Inc.(HGS)

Korea

Sunday, May 10, 2015

Page 14 of 100

9768

TERMOMECCANICA

Italy

Models (MES,MESB,D2D or PF )

10372

sterling SIHI S . A . S

Germany

Pressure level less than 220 Bar

11307

CLYDE UNION PUMPS

United Kingdom

11625

GE Nuovo Pignone SPA

Italy

Sub Category

Only for :
DD HF Centrifugal pump.

BOILER FEED PUMPS AND MOTORS for Steam Power Plant


Limitations/Conditions

No

Contractor Name

Location

9882

CLYDE UNION PUMPS

United Kingdom

9984

KSB, INC

Germany

9985

SULZER PUMPS

Germany / United
Kingdom / France

9986

FLOWSERVE

France, United
Kingdom & Austria

9987

MITSUBISHI

Japan

9988

EBARA

Japan

9989

HITACHI

Japan

9991

Flowserve- Coslada

Spain

Modeles (WXH,CSB,CHTA/DSB,DMX)

9993

TERMOMECCANICA

Italy

Models (MES,MESB,D2D or PF )

10371

sterling SIHI S . A . S

Germany

Pressure level less than 220 Bar

10788

TORISHIMA PUMPS mfg. Co. Ltd.

Japan

Main Category

Bus Ducts

Sub Category

BUSDUCT, METAL-ENCLOSED

No

Contractor Name

Location

6571

WESCOSA

Saudi Arabia

Sub Category

Limitations/Conditions

ISOLATED PHASE BUS DUCT


Limitations/Conditions

No

Contractor Name

Location

8855

AZZ - CALVERT

USA

9038

ABB

Country of origin is Country of origin is subject to SEC


subject to SEC
approval
approval

9040

Powell Electrical Systems, Inc. Delta/Unibus Division

USA, Northlake, IL

Sunday, May 10, 2015

Country of origin is subject to SEC


approval

Page 15 of 100

9041

GE

Canada

9042

HITACHI

Country of origin is Country of origin is subject to SEC


subject to SEC
approval
approval

9197

Simelectro

France

Model Powerduct IPB Series

9245

Elektrobudowa

Poland

Model Type ELPE with 5 years warranty.

9326

Alfa Standard

Italy

Up to 20KA for 36KV at 50C

9327

EGE Ltd.

Czech Republic /
Slovakia

Up to 25 KA for 36 KV at 50C and natural


cooling system only

Sub Category

None

NON SEGREGATED MV BUS DUCT

No

Contractor Name

Location

Limitations/Conditions

9048

ETA (BETOBAR)

FRANCE, BELGIUM

None

9049

MGC MOSER-GLASER

France

None

Sub Category

NON SEGREGATED PHASE BUS DUCT


Limitations/Conditions

No

Contractor Name

Location

8860

AZZ / CALVERT

USA

8861

SQUARE D

USA

8863

POWELL

Country of origin is Country of origin is subject to SEC


subject to SEC
approval
approval

9046

Powell Electrical Systems, Inc. Delta/Unibus Division

USA, Northlake, IL

Country of origin is subject to SEC


approval

9517

Simelectro

France

Model Transoduct NSPB Series LV

10132

Alfa Standard

Italy

Up to 3.5KA for 17.5KV at 50C

10133

EGE Ltd.

Czech Republic /
Slovakia

Up to 4.0KA for 1000V at 50C

Sub Category

Country of origin is subject to SEC


approval

Segregated Phase Bus Ducts

No

Contractor Name

Location

Limitations/Conditions

9518

Simelectro

France

Model Transoduct SPB Series (MV,LV)

10131

Alfa Standard

Italy

Up to 4.0KA for 1000V at 50C

10134

EGE Ltd.

Czech Republic /
Slovakia

Up to 3.5KA for 17.5KV at 50C

10410

AZZ / CALVERT

USA

Sunday, May 10, 2015

Page 16 of 100

Main Category

Cables & Cabling Accessories

Sub Category

110KV HV CABLES

No

Contractor Name

Location

6489

ABB

Germany

6980

RIYADH CABLE

Saudi Arabia

6982

SAUDI CABLE

Saudi Arabia

6984

FUJIKURA

Japan

Sub Category

400KV HV CABLES

No

Contractor Name

Location

6490

ABB

Germany

6985

FUJIKURA

Japan

Sub Category

Contractor Name

Location

636

Saudi Vompany for Cables ind.ltd

Saudi Arabia

6991

FURUKAWA ELECTRIC CO. LTD.

Japan

6998

SAUDI CABLE COMPANY

Saudi Arabia

6999

ALCATEL KABLE AG & CO. (NEXANS)

Germany

7000

FUJIKURA

Japan

7001

HITACHI CABLE LTD.

Japan

7002

SAUDI MODERN CO. FOR METAL CABLES


& PLASTIC IND., LTD.

Saudi Arabia

Limitations/Conditions

LPOF CABLE 380 KV

No

Contractor Name

Location

6652

SIEMENS

Germany

6957

TAIHAN ELECTRIC WIRE COMPANY

Korea

7021

DAINICHI-NIPPON CABLES (MITSUBISHI)

Japan

7039

J-POWER SYSTEM CORP.

Japan

7051

SHOWA CABLE

Japan

7055

ALCATEL

France

7067

FURUKAWA ELECTRIC CO. LTD.

Japan

Sunday, May 10, 2015

Limitations/Conditions

CABLE, POWER, 69 KV THROUGH 132KV

No

Sub Category

Limitations/Conditions

Limitations/Conditions

Page 17 of 100

7092

FUJIKURA

Japan

7104

PIRELLI

Italy

7117

CANADA WIRE

Canada

7122

KABEL RHEYDT (AEG)

Germany

7126

LS Cable and Systems Ltd.

Korea

7133

HITACHI CABLE LTD.

Japan

7135

MITSUBISHI CABLE INDUSTRIES LTD

Japan

7139

STANDARD TELEFON OG KABELFABRIK A/S Norway

Sub Category

XLPE CABLE 230 K V

No

Contractor Name

Location

6493

ABB

Germany

6953

TAIHAN ELECTRIC WIRE COMPANY

Korea

7006

LS Cable and Systems Ltd.

Korea

7017

DAINICHI-NIPPON CABLES (MITSUBISHI)

Japan

7027

DEMIRER KABLO/SAUDI CABLE CO.

Saudi Arabia

7035

J-POWER SYSTEM CORP.

Japan

7064

FURUKAWA ELECTRIC CO. LTD.

Japan

7073

NEXANS NORWAY AS

Norway

7084

BRUGG TELECOM AG

Switzerland

7089

FUJIKURA

Japan

Sub Category

XLPE CABLE -380 KV

No

Contractor Name

Location

6494

ABB

Germany

6954

TAIHAN ELECTRIC WIRE COMPANY

Korea

7007

LS Cable and Systems Ltd.

Korea

7018

DAINICHI-NIPPON CABLES (MITSUBISHI)

Japan

7036

J-POWER SYSTEM CORP.

Japan

7085

BRUGG TELECOM AG

Switzerland

7096

NEXANS NORWAY AS

Norway

7100

NKT

Germany

7112

VISCAS FUJIKURA

Japan

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 18 of 100

Sub Category

XLPE CABLES 110 TO 132 KV

No

Contractor Name

Location

6492

ABB

Germany

6934

RIYADH CABLES

Saudi Arabia

6943

SAUDI CABLE

Saudi Arabia

6952

TAIHAN ELECTRIC WIRE COMPANY

Korea

7005

LS Cable and Systems Ltd.

Korea

7016

DAINICHI-NIPPON CABLES (MITSUBISHI)

Japan

7026

DEMIRER KABLO/SAUDI CABLE CO.

Saudi Arabia

7034

J-POWER SYSTEM CORP.

Japan

7059

DRAKA NK

FINLAND

7063

FURUKAWA ELECTRIC CO. LTD.

Japan

7072

NEXANS NORWAY AS

Norway

7083

BRUGG TELECOM AG

Switzerland

7088

FUJIKURA

Japan

Main Category

Limitations/Conditions

CHIMNEY STACK & LINERS

Sub Category

CHIMNEY STACK & LINERS


Limitations/Conditions

No

Contractor Name

Location

8083

MARIANI BATTISTA ARABIA

Saudi Arabia

8150

SAUDI METAL COATING CO.

Saudi Arabia

8413

Balanced Engineering Construction BEC

Singapore

8418

HADEK (Protective Pennguard Block)

Netherlands

For the Plants with : FGD and with


Low Temperature Flue Gas Temperature

8655

BRADEN Europe B.V

Netherlands

For Gas Turbine and HRSG only

8706

TechTowers for Power & Telecom,Aarding


Thermal Acoustics

Netherlands

Only for Gas Turbines

9171

Chimneys and Refractories International


(CRI) - BEROA

Italy

10120

RAMZ FACTORY

Saudi Arabia

Sunday, May 10, 2015

1-Full supervision and guarantee from


the OEM.
2-All Engineering and design shall be
done by the OEM.

Page 19 of 100

10280

ENPRO

Turkey

10288

Nem Power System

Germany

10463

BEMCO Steel Industries (BSI)

Saudi Arabia

Main Category

gas turbine exhust system bypass &


main include diffuser ,ductwork
,diverter , silincer, expansion joint ,stack
and supporting structure.
2.fabrication shall be done in local
approval shops.

For simple & Combined cycle Power


Plants

Circulationg Water Pumps

Sub Category

MAIN SEAWATER CIRCULATING WATER PUMPS


Limitations/Conditions

No

Contractor Name

Location

5051

MITSUBISHI

Japan

5087

SULZER PUMPS

Germany / United
Kingdom / USA

5091

FLOWSERVE

Spain/Italy

5097

EBARA

Japan

5122

KSB

Germany

5155

GOULDS PUMPS

USA

5157

TERMOMECCANICA

Italy

5162

Sulzer Pumps

USA

5165

TORISHIMA PUMPS

Japan

5166

INGERSOLL RAND PUMPS

USA

5167

WORTHINGTON PUMPS

Country of origin is
subject to SEC
approval

8945

KUBOTA

Japan

Flow (m3/h): 60,000


Head (m) : 22
Motor rating (kw) : 3,900

9160

Hyosung GoodSprings, Inc.(HGS)

Korea

Manufactured in KoreaModels (VMF


1650-1490,2000-1750 & VMF 22001620)Flow up to ;35,000 m3/h

9389

Hyundai Heavy Industries co., LTD.

Korea

Model VKNM, flow 73,000 m3/h, Total


Head 23 meters.

9995

DMW

Japan

-Model:VPF
-Rate 1600m3/min
-Head:32 m

Sunday, May 10, 2015

Page 20 of 100

10050

HITACHI

Main Category

Japan
COMPOSITE OPTICAL OH GROUND WIRE (OPGW)

Sub Category

COMPOSITE OPTICAL OH GROUND WIRE (OPGW)

No

Contractor Name

Location

7061

DRAKA NK

FINLAND

7070

FURUKAWA ELECTRIC CO. LTD.

Japan

7095

FUJIKURA

Japan

7110

PIRELLI

Italy

7155

ALCOA FUJIKURA LTD (AFL)

United Kingdom

7159

BRUGG TELECOM AG

Switzerland

7175

PRYSMIAN TELECOM

Spain

7312

CORNING CABLES

United Kingdom

7313

PHILLIPS FITEL

Canada

Main Category

CONTROL ROOM FURNITURE

Sub Category

DCS CONTROL DESK

No

Contractor Name

Location

8035

EMERSON

USA

8041

IMAGE VISION

USA

8042

ENVAS

USA

10815

Lund Halsey

United Kingdom

Main Category
Sub Category

Limitations/Conditions

Limitations/Conditions

CONTROL SYSTEMS

Control Systems

No

Contractor Name

Location

Limitations/Conditions

9911

Wunderlich Malec Engineering,


Inc./Dacang Co

USA

System integration and fabrication of


Relay and Control Panels.
-Protection Relays and Control Relays
shall be provided from SEC Approved
Vendors List.

Sunday, May 10, 2015

Page 21 of 100

Main Category

Cranes-Hoists-Monorail

Sub Category

BRIDGE CRANES / HOISTS / MONORAILS


Limitations/Conditions

No

Contractor Name

Location

6292

ITALKRANE

Italy

6293

SAUDI CRANE

Saudi Arabia

6294

Kone

Saudi Arabia

6295

AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

6298

ABUS

Germany

8653

DEMAG CRANES & COMPONENTS

Saudi Arabia

-Manufacturing of Bridge Girder (SWL


up to 50 t, spans up to 30 m).
-Components must be from Demag
Germany.

9281

Ace Crane Systems LLC

UAE

-Up to 100 Ton


-For non-hazard area
-All equipments shall be from Abus
(Germany).

Limitations/Conditions

Main Category
Sub Category

DCS

CONTROLLERS FIELD

No

Contractor Name

Location

7631

FOXBORO COMPANY (INVENSYS)

USA

8002

RONAN ENGINEERING CO.

United Kingdom

8005

EMERSON-FISHER CONTROLS CO.

USA

Sub Category

DISTRIBUTED CONTROL SYSTEM

No

Contractor Name

Location

5047

GE

USA

5055

Mitsubishi Hitachi Power Systems (MHPS)

Japan

5067

SIEMENS

Germany

6523

ABB

USA /SWEDEN /
GERMANY

8034

EMERSON

USA

8913

HONEYWELL, INC.

USA

8917

YOKOGAWA ELECTRIC CORP

Japan

Sunday, May 10, 2015

Limitations/Conditions

Page 22 of 100

8974

Yokogawa-Saudi Arabia

Saudi Arabia

1. DCS: Models CENTUM- VP.2. All


equipment, instruments & components
(Controllers, I/O cards, Processors,
Communication cards, power supplies
etc) shall be from Yokogawa factorySingapore or japan .3. All Panels &
Marshalling Cabinets shall be procured
from M/s. RITAL-Germany.

9820

Invensys Saudi Arabia Co Ltd.

Saudi Arabia

FOXBORO DCS model IIA Series V8.5&


8.6
- All equipment, Instruments &
components
(Controllers, 110 Cards, Processors,
Communication cards, Power Supplies
etc,)
shall be from FOXBORO-USA.
- All Panels & Marshalling Cabinets shall
be
procured from MIS RITAL- Germany.

9926

Yokogawa Electric Asia Pte.Ltd.Singapore

Singapore

Main Category

DG sets & Motors

Sub Category

BLACK START GENERATOR SETS

No

Contractor Name

Location

6526

Mitsubishi Hitachi Power Systems (MHPS)

Japan

8071

CATERPILLAR

USA

8072

CUMMINS

USA

Sub Category

FORM-WOUND BRUSHLESS SYNCHRONOUS MOTORS

No

Contractor Name

Location

5074

GE Energy Power Conversion

NANCY, FRANCE

6542

SIEMENS

Germany

6552

GENERAL ELECTRIC

PETERBOROUGH,
ON, CANADA

11055

NIDEC Ansaldo Sistemi Industriali S.P.A

Italy

Sub Category

Limitations/Conditions

FORM-WOUND INDUCTION MOTORS: 250 HP AND ABOVE

No

Contractor Name

Location

5073

GE Energy Power Conversion

NANCY, FRANCE

6474

ABB

VASTERAS, SWEDEN

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 23 of 100

6541

SIEMENS

Germany

6551

GENERAL ELECTRIC

CAMPINAS, BRAZIL

6569

SIEMENS ENERGY AND AUTOMATION

USA

6736

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

6737

LAURENCE, SCOTT & ELECTROMOTORS UK United Kingdom

6738

TECO - WESTINGHOUSE

USA

6739

TMA ELECTRIC CORP. WEST

Japan

6740

TMA ELECTRIC CORP. EAST

Japan

6741

Ansaldo Sistemi Industriali S.p.A

Italy

11326

TECO Middle East Electrical & Machinery


Co. Ltd.,

Saudi Arabia

-Voltage level Up to 6.6 KV.


-Motor size Up to 900HP
*Conditions:
-One Motor of each type supplied to SEC
Projects, shall be type tested once.

Limitations/Conditions

Sub Category

MOTORS: UP TO 250 HP

No

Contractor Name

Location

5053

Mitsubishi Hitachi Power Systems (MHPS)

Japan

5060

SIEMENS

MORELIA
(GUADALAJARA),
MEXICO

6724

TOSHIBA

USA

6731

TECO - WESTINGHOUSE

USA

6732

BARLDOR ELECTRIC MOTORS

USA

6733

RELIANCE

USA

6734

U.S ELECTRIC

USA

6735

BROOK HANSEN (INVENSYS BROOK


CROMPTON)

United Kingdom

9291

TECO Middle East Electrical & Machinery


Co.

Saudi Arabia

Sub Category

-Low Voltage

MV/LV ELECTRICAL MOTORS

No

Contractor Name

Location

6742

TMAE (MV MOTORS)

Japan

6743

SIEMENS (LV.MV MOTORS)

Saudi Arabia

6744

GE Power Conversion

FRANCE, BELGIUM,
United Kingdom

Sunday, May 10, 2015

Non-explosion proof (170064 and


170065) only and 8,000 HP maximum

Limitations/Conditions

Page 24 of 100

8409

Hyosung Corporation

Korea

1-Up to 5000KW ,13.8 KV2-Up to


9,000KW , 11KV

8446

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

-Up to 7.5 MW-Model HRQ3 series &


Model HRN3 series.-From Korea
Factory Only

8632

SCHORCH Elektrische Machinen

Germany

1-MV Motor:Up to 5 MWModel


KA,KR & KW2-LV Motors:-Up to 200
KW-Model DA

8970

TATUNG Electric Co

Taiwan

1-LV Motors :Up to 200HP, 480V


2- MV Motors : Up to 1000KW, 6.6 KV

11054

NIDEC Ansaldo Sistemi Industriali S.P.A

Italy

Main Category

Diesel Generators

Sub Category

DIESEL DRIVEN GENERATORS


Limitations/Conditions

No

Contractor Name

Location

6749

BALDORGEN

USA

6750

DETRIOT DIESELS

USA

6751

WARTSILA POWER CONTRACTING CO. LTD

Finland

6752

CUMMINS

USA

6753

STEWART & STEVENSON

USA

6754

ATLAS COPCO AIRPOWER N.V.

Antwerp, Belgium

6755

CATERPILLAR

USA

8343

MAN

Germany

8637

Hyundai Heavey Industries Co. Ltd. (HHI)

Korea

Model HiMSEN- H17/28,Output 0.5 to


0.9 MW- H21/32, Output 1.2-1.8
MW- H25/33 Output 1.4-2.6
MWH32/40, Output 3-10 MW

9156

DOOSAN ENGINE

Korea

Model # 12V32/40

9244

GE

USA

For Models:V228 ,V250 , L250

Main Category

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

Sub Category

DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV

No

Contractor Name

Location

6589

ABB ( T& D)

USA

6616

AREVA

France

Sunday, May 10, 2015

Limitations/Conditions

Page 25 of 100

6633

EFACEC

PORTUGAL

6647

JAPAN AE POWER SYSTEMS CORP.

Japan

6650

S&C

USA

6665

SIEMENS

Germany

7347

ALPHA NIDAU

Switzerland

7348

HAPAM

Netherlands

7349

MG/EGIC

France

7350

SDCEM

France

7351

SOUTHERN STATES

USA

Main Category

Diverter/ Weather Dampers and drive system & Bypass Stack and Silencer

Sub Category

Diverter/ Weather Dampers and drive system & Bypass Stack and Silencer
Limitations/Conditions

No

Contractor Name

Location

9173

Effox-Flextor

Canada

9448

Nem Power System

Germany

9449

Samkwang Power System

Korea

9450

Fellow Co., LTD

Japan

9922

Clyde Bergemann Bachmann

USA

10066

BALTEC

Australia

Fabrication shall be done in SEC


approval shop.

Limitations/Conditions

Main Category

Dryers

Sub Category

AIR DRYERS

No

Contractor Name

Location

5221

INGERSOLL RAND

USA

5223

SULLAIR

Country of origin is
subject to SEC
approval

5234

KEMP

Country of origin is
subject to SEC
approval

5235

ATLAS COPCO

Antwerp, Belgium

Sunday, May 10, 2015

No limitation

Page 26 of 100

5236

PNEUMATIC PRODUCTIONS CORPORATION Country of origin is


subject to SEC
approval

5237

GDI

Country of origin is
subject to SEC
approval

5238

DELTECH

Country of origin is
subject to SEC
approval

Sub Category

H2 GAS DRYER

No

Contractor Name

Location

7555

E-ONE, GCMX

USA

Main Category

Limitations/Conditions

Emergency Shutdown System (ESD)

Sub Category

Emergency Shutdown System (ESD)

No

Contractor Name

Location

Limitations/Conditions

9323

Yokogawa-Saudi Arabia

Saudi Arabia

1. ESD: Models Prosafe- RS2. All


equipment, instruments & components
(Controllers, I/O cards, Processors,
Communication cards, power supplies
etc) shall be from Yokogawa factoryJapan.3. All Panels & Marshalling
Cabinets shall be procured from M/s.
RITA

Main Category

EMERGENCY SHUTDOWN SYSTEMS

Sub Category

ESD PROGRAMMABLE CONTROLLER SYSYTEMS; EMERGENCY SHUTDOWN


SYSTEM; PROGRAMMABLE LOGIC CONTROLLER

No

Contractor Name

Location

7948

INDUSTRIAL CONTROL SERVICES LTD.

United Kingdom

7949

INDUSTRIAL CONTROL SERVICES

USA

7950

TRICONEX CORPORATION

USA

Main Category
Sub Category
No

ESP

Electrostatic Precipitator (ESP)

Contractor Name

Sunday, May 10, 2015

Limitations/Conditions

Location

Limitations/Conditions

Page 27 of 100

8730

IHI Corporation

Japan

9312

Lodge Cottrell Limited

United Kingdom

9371

Fisia Babcock Environment Gmbh

Germany

9382

NOL-TEC

USA

Main Category

All Sub-Vendor should be from SEC


approved vendor list.

All Sub-Vendor should be in SEC


approved vendor list.

FANS & BLOWERS

Sub Category

BOILER FANS (ID, FD & GR)

No

Contractor Name

Location

5103

HITACHI

Japan

6469

TLT BABCOCK

USA

6470

HOWDEN POWER

Denmark

6472

FLAKTWOODS AB / ABB

SWEDEN

6524

FLAKT SOLYVENT

France

6525

BOLDROCCHI

Italy

6527

Mitsubishi Hitachi Power Systems (MHPS)

Japan

9432

Howden

United Kingdom

Sub Category

Limitations/Conditions

Cooling Fans

No

Contractor Name

Location

Limitations/Conditions

9162

illinois blower, inc.

USA

Model (0132), Model (1643) & Model


(1233)

9982

Howden

China

D- Series

10097

Zamil Hudson

Saudi Arabia

Fans and its auxiliaries shall be from SEC


approved vendors list

Main Category
Sub Category

FIELD INSTRUMENTATION

FIELD INSTRUMENTATION FOR BOILER

No

Contractor Name

Location

5066

SIEMENS

Saudi Arabia

7599

FISHER ROSEMOUNT

Italy / USA

7600

TEMP PRO

USA

Sunday, May 10, 2015

Limitations/Conditions

Page 28 of 100

7601

BAILEY (ABB)

Main Category

USA

FLAME MONITORING SYSTEMS

Sub Category

INSTRUMENTATION ANALYTICAL MEASUREMENTS: FLAME SUPERVISORY


SYSTEMS

No

Contractor Name

Location

7588

FIREYE (UTC)

USA

7589

FORNEY (UTC)

USA

7590

HONEYWELL, INC

USA

7593

ALLEN BRADLEY (ROCKWELL


AUTOMATION)

USA

7595

IRIS (E)

CANADA / USA

Main Category
Sub Category

FLOW COMPUTERS

INSTRUMENTATION ANALYTICAL MEASUREMENTS: COMPUTERS (FLOW)

No

Contractor Name

Location

7579

DANIEL (EMERSON)

USA

7581

OMNI

USA

7582

FISHER (EMERSON)

USA

Main Category
Sub Category

Limitations/Conditions

FLOWMETERS

ULTRASONIC FLOWMETERS; FLOW METER: ULTRASONIC; LIQUID, GAS AND


FLARE LINE SERVICE

No

Contractor Name

Location

7736

KROHNE

Germany

7738

GE PANAMETRICS

Shannon, IE

7739

ROXAR FLOW MEASUREMENT (PREV.


FLUENTA)

Bergen, NO

7740

INSTROMET INTERNATIONAL NV

Essen, BE

7741

EMERSON-DANIEL DIVISION

USA

7744

SICK-ENGINEERING GMBH

Germany

10305

Endress+Hauser Flowtec AG,Switzerland

Switzerland

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 29 of 100

Main Category

Flue Gas Desulphurization Plant (SWFGD)

Sub Category

Flue Gas Desulphurization plant (SWFGD)

No

Contractor Name

Location

Limitations/Conditions

8729

IHI Corporation

Japan

All Sub-Vendor should be from SEC


approved vendor list.

8923

AE&E (DOOSAN)

Germany

Sea Water Flue Gas Desulphurization


Plant (SWFGD) Only

9276

Fisia Babcock Environment Gmbh (FBE)

Germany

All Sub-Vendor should be in SEC


approved vendor list.

10043

Mitsubishi Hitachi Power Systems (MHPS)

Japan

Main Category

Fuel Gas Compressors

Sub Category

FUEL GAS COMPRESSORS


Limitations/Conditions

No

Contractor Name

Location

5045

GE

USA

5226

DRESSER RAND

Singapore

5231

AC COMPRESSOR

USA

5233

UNIVERSAL COMPRESSION

USA

5252

MAN

Germany

5253

ROLLS ROYCE

United Kingdom

5254

DRESSER RAND

Country of origin is
subject to SEC
approval

5255

ATLAS COPCO

Germany / USA

5256

KAWASAKI HEAVY IND. LTD.

Japan

10880

Cameron Compression Systems

USA

No Limitation

10974

GE Nuovo Pignone SPA

Italy

Only for :
- Centrifugal Vertical Split LP/MP-B CL,
RB, RH, VH.
- Centrifu gal Vertical Split HP 531 531
BCL.

Main Category

Sunday, May 10, 2015

Fuel Gas Treatment

Page 30 of 100

Sub Category

FUEL GAS TREATMENT

No

Contractor Name

Location

5239

ANDERSON SEPARATOR/CLARK
RELIANCE/NATIONAL FILTRATION

USA

5240

Peerless Mfg Co

Country of origin is
subject to SEC
approval

5241

FLOWTRONEX

Country of origin is
subject to SEC
approval

5242

GAS PACKAGERS

Country of origin is
subject to SEC
approval

5243

GTS ENERGY

Country of origin is
subject to SEC
approval

5244

HANOVER SMITH

Country of origin is
subject to SEC
approval

5245

OIL & GAS SYSTEMS

Country of origin is
subject to SEC
approval

5246

PEERLESS

Dalas,USA

5249

TOTAL ENERGY RESOURCES

Country of origin is
subject to SEC
approval

5250

TRAN-AM

Country of origin is
subject to SEC
approval

5251

UNIVERSAL COMPRESSORS

Country of origin is
subject to SEC
approval

10391

Petrogas

Netherlands

Main Category

FUEL METERING SYSTEMS & PROVERS

Sub Category

METER; SMALL VOLUME PROVER

No

Contractor Name

Location

7676

DANIEL EUROPE LTD.

United Kingdom

7695

ALDERLEY FZE

UAE

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 31 of 100

7700

DANIEL MEASUREMENT & CONTORL

USA

7721

CALIBRON SYSTEMS INCORPORATED

USA

11255

GE Nuovo Pignone SPA

Italy

Sub Category

Metering Control Systems, ST500, ST501

No

Contractor Name

Location

8915

Swinton Technology, UK

United Kingdom

Main Category

Limitations/Conditions

Fuel Oil Pumps

Sub Category

FUEL OIL PUMPS


Limitations/Conditions

No

Contractor Name

Location

5092

FLOWSERVE

France, United
Kingdom &
Austria,Germany

5098

EBARA

Japan

5169

ALLWEILER

Germany

5170

IMO

USA

5172

LEISTRITZ

Germany

5174

CERPELLI

Italy

5176

COLFAX CREOSOTING CO

USA

8188

SULZER PUMPS

Germany / United
Kingdom / USA

8190

GOULDS PUMPS

USA

8191

VIKING

USA

8192

PATTERSON

USA

9392

Hyundai Heavy Industries co., LTD.

Korea

Model HD, max flow 700 m3/h total


head 45 m

Limitations/Conditions

Sub Category

HFO/CO Booster pumps

No

Contractor Name

Location

8193

Ebara

Japan

Main Category

Sunday, May 10, 2015

Fuel Oil Treatment

Page 32 of 100

Sub Category

FUEL OIL EQUIPMENT (HEATERS, FILTERS, CHEMICAL FUEL)

No

Contractor Name

Location

5177

COLFAX CREOSOTING CO

USA

5178

CAMPI

Italy

5179

METI (FILTERS)

Italy

Sub Category

Fuel Oil Treatment Plant

No

Contractor Name

Location

9333

ALFA LAVAL

Sweden

9334

Westfalia

Germany

Main Category
Sub Category

Fuel Unloading Arm

Contractor Name

Location

10466

EMCO WHEATON

Germany

10467

STV GmbH

Germany

Sub Category

Limitations/Conditions

Fuel Unloading

No

Main Category

Limitations/Conditions

Limitations/Conditions

Gas Turbine

COMBUSTION TURBINE
Limitations/Conditions

No

Contractor Name

Location

5044

General Electric (GE)

USA

5048

Mitsubishi Hitachi Power Systems (MHPS)

Takasago, Japan /
Georgia, USA

5056

SIEMENS

Berlin, Germany /
Charlotte, USA

8960

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

Gas turbine M501F.


Hot Gas Part must be manufactured
and supplied by
MHI.
Extended warranty shall be 5 years

11252

GE Nuovo Pignone SPA

Italy

Only for :
For Model : GE10-1 , GE10-2. MS 5001
PA, MS 5002C, MS 5002D , MS 5002E,
MS 6001B , MS 7001 EA,

Sunday, May 10, 2015

Page 33 of 100

Sub Category

GTG intake / exhaust systems

No

Contractor Name

Location

Limitations/Conditions

9254

Advance Triad - Turbine Services Ltd.

Saudi Arabia

M/S BIS Gerber GmbH-Germany


(Filter House Re-Engineering).

9286

ATCO Structures & Logistics Ltd

Canada

GAS Turbine and HRSG Exhaust System

9859

BIS Gerber Gmbh

Germany

9905

Northern Technical L.L.C.

UAE

For:
1-Simple Cycle Power Plant
2-Supporting acceptance letter shall be
provided from Gas Turbine
Manufacturer.

10695

Camfil Farr Power Systems

Sweeden

No Limitations.

Main Category

General Service Pumps

Sub Category

CLOSED CIRCUIT COOLING WATER PUMPS

No

Contractor Name

Location

Limitations/Conditions

9769

TERMOMECCANICA

Italy

Model : DD

Sub Category

CONDENSATE PUMPS AND MOTORS

No

Contractor Name

Location

5085

SULZER PUMPS

Germany / United
Kingdom / USA

5089

FLOWSERVE

France, United
Kingdom & Austria

5096

EBARA

Japan

5102

HITACHI

Japan

5121

KSB

Germany

5153

Sulzer Pumps

USA

5154

GOULDS PUMPS

USA

5156

TERMOMECCANICA

Italy

8694

TORISHIMA PUMPS

Japan

Sunday, May 10, 2015

Limitations/Conditions

Page 34 of 100

8957

KUBOTA

Japan

For :1-Condensate Booster


PumpModel No : MV-V(P)/DFV(P)Flow : 1,500 m3/hrHead : 280 m
Motor rating : 880 kw 2-Condenste
Extraction Pump Model No: MVV(P)/DF-V(P)Flow : 1500 m3/hr Head :
190 mMotor rating :540 kw

9146

Flowserve- Coslada

Spain

Models (APKD & QL )

9390

Hyundai Heavy Industries co., LTD.

Korea

Model VW, max flow 1800 head 325


meter

9936

DMW

Japan

model: VPF
Rate: 2000 m3/min.
Head: 32 m

9977

Hyosung GoodSprings, Inc.(HGS)

Korea

10373

sterling SIHI S . A . S

Germany

11306

CLYDE UNION PUMPS

United Kingdom

Sub Category

CONDENSER VACUUM SYSTEM

No

Contractor Name

Location

5208

SVS

Germany

Sub Category

Limitations/Conditions

CONTROLGEAR, OUTDOOR, HIGH VOLTAGE, SUBMERSIBLE PUMP

No

Contractor Name

Location

Limitations/Conditions

8977

ABB ELECTRICAL IND. CO., LTD. (AEIL)

Saudi Arabia

None

8979

HAWA EPBF

Saudi Arabia

None

8980

REMAL

Saudi Arabia

None

8981

WESCOSA

Saudi Arabia

None

Sub Category

MISCELLANEOUS AUXILIARY PUMPS CENTRIFUGAL VERTICAL/HORIZONTAL


INCLUDING EL MOTORS

No

Contractor Name

Location

5093

FLOWSERVE

France, United
Kingdom & Austria

5099

EBARA

Japan

5124

KSB

Germany

5161

TERMOMECCANICA

Italy

5247

PEERLESS

Dalas,USA

5257

VERGANI / FINDER

Italy

5258

GARBARINO

Italy

Sunday, May 10, 2015

Limitations/Conditions

Page 35 of 100

5259

RUTCHIE (ONLY FOR HORIZONTAL)

France, Swiss

5260

AURORA PUMPS

Country of origin is
subject to SEC
approval

5263

SULZER PUMPS

Germany / United
Kingdom / USA

5264

Sulzer Pumps

USA

5265

LOWARA

Country of origin is
subject to SEC
approval

5267

GROUNDFOS

Country of origin is
subject to SEC
approval

8662

Hyosung GoodSprings, Inc.(HGS)

Korea

Manufactured in Korea.
Up to: flow 485.2 m3/h ,and head 87.3
m

8719

Saudi Pump Factory

Saudi Arabia

Models : VS1,VS6,OH2

8950

KUBOTA

Japan

For:1-FGD Supplementary Seawater


PumpModel No : DF-VFlow :47,310
m3/hrHead :16mMotor rating:
2,800kw2- Absorber Spray
PumpModel No :DF-VFlow : 12,800
m3/hrHead : 21-31 mMotor rating
:1,000-1,450 kw3-MSF Seawater
Supply Pump :Model No :DF-VFlo

9391

Hyundai Heavy Industries co., LTD.

Korea

Model VK, max flow 7000 m3/hr head


75 meter

9919

ITT Goulds Pumps Co. LTD

Korea

Model series:31XX,34XX,36XX,37XX and


39XX

10256

TORISHIMA PUMPS

Japan

11256

GE Nuovo Pignone SPA

Italy

Only for :
DVS centrifugal pump, HTF Centrifugal
pump.

11403

SULZER PUMPS SPAIN S.A.U

Spain

No Limitations

Limitations/Conditions

Sub Category

VACUUM PUMPS

No

Contractor Name

Location

5272

GRAHAM MANUFACTURING

Country of origin is
subject to SEC
approval

5273

NASH

USA

5274

NITECH

USA

Sunday, May 10, 2015

Page 36 of 100

Main Category

Heat Exchangers

Sub Category

CLOSED CIRCUIT COOLING WATER COOLERS

No

Contractor Name

Location

4950

ALFA-LAVAL THERMAL AB

Maarssen, NL

4951

LINDE A.G. PROCESS ENG. &


CONTRACTING

TECHTERTING, DE

4952

ALFA-LAVAL THERMAL, INC.

USA

4953

TRANTER INC./TEXAS DIV/DOVER DIVERS

USA

4954

HISAKA WORKS, LTD.

Japan

4955

Mitsubishi Hitachi Power Systems (MHPS)

Japan

5032

GEA

Japan

5039

ALFA LAVAL

Sweden

5139

MARLEY/BALKE DURR

Germany

8335

GULF STEEL WORKS

Saudi Arabia

10092

TSM Tech Co., Ltd.

Korea

10145

ECODYNE

USA

10862

FUNKE

GERMANY

11137

LARSEN AND TOUBRO LIMITED

India

11138

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

11139

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

11140

OLMI

SVISIO, IT

11141

FBM - HUDSON ITALIANA SPA

TERNO D'ISOLA, IT

11143

HUGHES-ANDERSON HEAT EXCHANGERS,


IN

USA

11144

SANTAZ-CENSA S.A.

PORRINOPONTEVEDRA, ES

11145

INDUSTRIE MECCANICHE DI BAGNOLO

Italy

11147

SHELL AND TUBE INCORPORATED

USA

11148

STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKENDVOWEILER, DE

11149

BELLELI ENERGY SRL

MANTOVA, IT

11150

OFFICINE LUIGI-RESTA S.P.A.

SCANZOROSCIATE

Sunday, May 10, 2015

Limitations/Conditions

Page 37 of 100

11152

AL-GASWA SUPPORT CO., LTD.

Saudi Arabia

11153

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGNAM, KR

11154

MITSUI BABCOCK

United Kingdom

11155

HITACHI ZOSEN

Japan

11156

OHMSTEDE, INC.

USA

11157

BRONSWERK HEAT TRANSFER B.V.

Netherlands

11158

R. E. ENGINEERING

ASKAR, BM

11159

HITACHI, LTD.

Japan

11160

HYUNDAI HEAVY INDUSTRIES CO,LTD

ULSAN
KYUNGNAM, KR

11161

KAWASAKI HEAVY IND., LTD.

Japan

11162

TAKAHASHI IRON WORKS CO., LTD.

Japan

11164

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

11167

BHI

Korea

11170

Unimit Engineering

Thailand

Sub Category

KASADO WORKS

CONDENSER, AIR COOLED (ACC)


Limitations/Conditions

No

Contractor Name

Location

5033

GEA Energietechnik GmbH

South Africa /
Germany

5136

SPX Cooling Technologies, Inc. (MARLEY)

USA / Belgium /
Germany / United
Kingdom

9595

GEA

China

9798

GEA EGI Contracting

Hungary

9809

SPX Cooling Technologies GmbH

China

Fabrication shop only

9852

TONGYANG TS Inc

Korea

For Multiple rows bundle fabrication


shop only

Sunday, May 10, 2015

Fabrication shop only

Page 38 of 100

9879

RESEARCH COTTRELL DRY COOLING, INC


(RCDC)

Belgium

- The ACC is only approved to be


fabricated in HAMON D'HONDT Middle
East Co. Ltd., Jubail facility or RESEARCH
COTTRELL DRY COOLING, INC (RCDC),
China.
- Engineering and Design must be done
at Research-Cottrell Dry Cooling
office,Belguim.
-All Stainless and Carbon steel headers
must be supplied from France.
-All installed Fans,Motors and Gearbox
shall be as SEC AVL.

10079

S&T Corporation

Korea


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10252

HOLTEC INTERNATIONAL

USA

Sub Category

CONDENSER, WET SURFACE

No

Contractor Name

Location

5052

Mitsubishi Hitachi Power Systems (MHPS)

Japan

5057

SIEMENS

Germany

5135

SPX (MARLEY)

USA

5204

GRAHAM MANUFACTURING

USA

5205

Thermal Engineering International (TEI)

USA

5206

YUBA

Country of origin is
subject to SEC
approval

5207

HOLTEC INTERNATIONAL

USA

8743

BHI

Korea

10091

TSM Tech Co., Ltd.

Korea

Sunday, May 10, 2015

Limitations/Conditions

Page 39 of 100

10253

PT. Siemens

Cilegon, Indonesia

10686

SEDAE ENERTECH

Korea

Sub Category

- All engineering and design must be


done at Siemens, Germany.
- The Condenser tubes and Tube sheet
must be sourced through Siemens,
Mulhaim, Germany.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

COOLING TOWERS
Limitations/Conditions

No

Contractor Name

Location

5031

GEA Polacel Cooling Towers FZCO

Japan

5134

SPX (MARLEY)

USA

5137

MIDWEST TOWERS, INC

USA

5138

INTERNATIONAL COOLING TOWER

USA

8712

SPIG S.p.A. Societ per impianti Generali

Italy

WET COOLING TOWERS

Limitations/Conditions

Sub Category

FEED WATER HEATERS

No

Contractor Name

Location

4997

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4999

BALKEDURR

Germany

9782

Foster Wheeler

Spain

10173

Energyen Corporation

Korea

10245

APL Apparatebau GmbH

Austria

10250

HOLTEC INTERNATIONAL

USA

10258

Thermal Engineering International (TEI)

USA

10357

SEDAE ENERTECH

Korea

10361

TSM Tech Co., Ltd.

Korea

10435

BHI

Korea

10440

STF SPA Italy

Italy

10825

CAMPI

Italy

Sunday, May 10, 2015

Up to 700 MW

Page 40 of 100

11298

Zamil Steel Co.

Sub Category

Saudi Arabia

Water bath heaters

Gas Gas Heater (GGH)

No

Contractor Name

Location

Limitations/Conditions

10860

Burmeister & Wain Energy A/S (BWE),STF

Denmark

all sub venders for the main parts shall


be approved by sec

Sub Category

HEAT EXCHANGER: SHELL AND TUBE HEAT EXCHANGER; CARBON STEEL OR


LOW ALLOY AND MAX. WALL THICKNESS OF 38 MM (1.5 IN.)

No

Contractor Name

Location

4618

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4680

SANTAZ-CENSA S.A.

PORRINOPONTEVEDRA, ES

4699

HITACHI ZOSEN

Japan

4789

OLMI

SVISIO, IT

4798

LARSEN AND TOUBRO LIMITED

India

4813

STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKENDVOWEILER, DE

4878

MITSUI BABCOCK

United Kingdom

4885

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGNAM, KR

4914

TAKAHASHI IRON WORKS CO., LTD.

Japan

4920

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4925

BRONSWERK HEAT TRANSFER B.V.

Netherlands

4928

FBM - HUDSON ITALIANA SPA

TERNO D'ISOLA, IT

4968

BELLELI ENERGY SRL

MANTOVA, IT

4972

OFFICINE LUIGI-RESTA S.P.A.

SCANZOROSCIATE

4978

HUGHES-ANDERSON HEAT EXCHANGERS,


IN

USA

4981

OHMSTEDE, INC.

USA

4985

SHELL AND TUBE INCORPORATED

USA

4998

Mitsubishi Hitachi Power Systems (MHPS)

Japan

5000

AL-GASWA SUPPORT CO., LTD.

Saudi Arabia

5001

R. E. ENGINEERING

ASKAR, BM

5004

INDUSTRIE MECCANICHE DI BAGNOLO

Italy

5006

HITACHI, LTD.

Japan

Sunday, May 10, 2015

KASADO WORKS

Limitations/Conditions

Page 41 of 100

5007

HYUNDAI HEAVY INDUSTRIES CO,LTD

ULSAN
KYUNGNAM, KR

5008

KAWASAKI HEAVY IND., LTD.

Japan

5010

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

8337

GULF STEEL WORKS

Saudi Arabia

9869

BHI

Korea

10170

DBI Corporation

Korea

11027

Unimit Engineering

Thailand

Sub Category

HEAT EXCHANGER: SURFACE STEAM CONDENSER SYSTEM: COMPLETE WITH


EJECTORS & CONDENSER EXCHANGER
Limitations/Conditions

No

Contractor Name

Location

4834

TECHNOTHERM CORPORATION

USA

8714

DBI Corporation

Korea

Fabrication shop only

9198

Energyen Corporation

Korea

Fabrication Shop only.

9781

Foster Wheeler

Spain

9865

BHI

Korea

10078

S&T Corporation

Korea


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10442

STF SPA Italy

Italy

Up to 900MW

Sub Category

HEAT EXCHANGERS: AIR COOLED HEAT EXCHANGERS / FIN FAN COOLERS

No

Contractor Name

Location

4617

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4714

KAWASAKI HEAVY IND., LTD.

Japan

4764

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4787

OLMI

SUISIO, IT

4911

TAKAHASHI IRON WORKS CO., LTD.

Japan

4916

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4922

BATIGNOLLES TECHNOLOGIES
THERMIQUES

NANTES, FR

4924

BRONSWERK HEAT TRANSFER B.V.

Netherlands

Sunday, May 10, 2015

Limitations/Conditions

Page 42 of 100

4927

FBM - HUDSON ITALIANA SPA

TERNO DISOLA, IT

4930

GEA LUFTKUEHLER

HERNE, DE

4931

GEA RAINEY CORP.

USA

4932

HUDSON PRODUCTS CORPORATION

USA

4935

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYOUNGKI-DO, KR

4937

SASAKURA ENGINEERING CO., LTD.

Japan

8333

GULF STEEL WORKS

Saudi Arabia

8962

Jord International PTY Ltd.

Korea

9715

Zamil Hudson

Saudi Arabia

9861

BHI

Korea

9953

Hamon D'Hondt Middle East

Saudi Arabia

10025

GEA EGI Contracting

Hungary

10026

ECODYNE

USA

10074

Daekjung Machinery & Engineering Co, Ltd Korea


(DKME)


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10083

S&T Corporation

Korea


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

10093

TSM Tech Co., Ltd.

Korea

10094

ZAMIL STEEL INDUSTRIES

Saudi Arabia

10166

TONGYANG TS Inc

Korea

10172

Energyen Corporation

Korea

Sunday, May 10, 2015

- Engineering and Design must be done


at Hamon D'Hondt.S.A office,France.
-All Stainless and Carbon steel headers
and pressure parts must be supplied
from France.
-All installed Fans,Motors and Gearbox
shall be supplied from USA,West Europe
or Japan.

No Limitation

Page 43 of 100

10251

HOLTEC INTERNATIONAL

USA

10255

APL Apparatebau GmbH

Austria

10486

Ecodyne UET

Switzerland

Compact Type

10679

GEA Erg-Spirale et Soramat SAS

France

Compact Type

11258

GE Nuovo Pignone SPA

Italy

Sub Category

HEAT EXCHANGERS: ELECTRICAL HEAT EXCHANGERS

No

Contractor Name

Location

4716

KAWASAKI HEAVY IND., LTD.

USA

4956

ELTRON CHROMALOX

United Kingdom

4957

WELLMAN THERMAL SYSTEMS

USA

Sub Category

HEAT EXCHANGERS: MULTI-PIPE HEAT EXCHANGERS

No

Contractor Name

Location

4715

KAWASAKI HEAVY IND., LTD.

Japan

4765

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4829

Peerless Mfg Co

USA

4883

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGYAM, KR

4917

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4940

BROWN FINTUBE FRANCE SA

THONON-LT3BAINS, FR

4942

BROWN FINTUBE COMPANY

USA

4943

JAPAN STEEL WORKS, LTD.

Japan

4947

Posco plantec

ULSAN CITY, KR

8334

GULF STEEL WORKS

Saudi Arabia

8680

KT heavy Industries Co. Ltd.

Korea

10684

SEDAE ENERTECH

Korea

11021

BERTSCH Energy

Bludenz , Austria

Sub Category

Limitations/Conditions

1-Manufacturng in Korea2-KT Heavy


Industries to Provide Extended
Warrantee to 5 Years Surface Area
(EFF./SHEL ) up to 570 m2

HEAT EXCHANGERS: PLATE TYPE HEAT EXCHANGERS

No

Contractor Name

Location

11172

GULF STEEL WORKS

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 44 of 100

11173

LINDE A.G. PROCESS ENG. &


CONTRACTING

TECHTERTING, DE

11174

ALFA-LAVAL THERMAL AB

Maarssen, NL

11175

Mitsubishi Hitachi Power Systems (MHPS)

Japan

11176

HISAKA WORKS, LTD.

Japan

11177

TRANTER INC./TEXAS DIV/DOVER DIVERS

USA

11178

ALFA-LAVAL THERMAL, INC.

USA

11179

FUNKE

GERMANY

Sub Category

HEAT EXCHANGERS: SHELL-AND-TUBE HEAT EXCHANGER: SHELL AND TUBE


TYPE; ALL MAT'L OTHER THAN CARBON STEEL & LOW ALLOY, OR WALL THK

No

Contractor Name

Location

4681

SANTAZ-CENSA S.A.

PORRINOPONTEVEDRA, ES

4700

HITACHI ZOSEN

Japan

4707

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

4739

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4769

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4790

OLMI

SVISIO, IT

4814

STAHL-UND APPARATEBAU HANS LEFFER G SAARBRUEZKENDVOWEILER, DE

4872

BILFAL Heavy Industries Ltd

Saudi Arabia

4879

MITSUI BABCOCK

United Kingdom

4886

KOREA HEAVY INDUSTRIES AND


CONSTRUCTION

KYUNGNAM, KR

4915

TAKAHASHI IRON WORKS CO., LTD.

Japan

4921

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4926

BRONSWERK HEAT TRANSFER B.V.

Netherlands

4929

FBM - HUDSON ITALIANA SPA

TERND D'ISOLA, IT

4946

JAPAN STEEL WORKS, LTD.

Japan

4969

BELLELI ENERGY SRL

MANTOVA, IT

4973

OFFICINE LUIGI-RESTA S.P.A.

SCANZOROSCIATE,
IT

4982

OHMSTEDE, INC.

USA

4986

SHELL AND TUBE INCORPORATED

USA

4988

HITACHI KASADO JYUKOGYO

Japan

Sunday, May 10, 2015

Limitations/Conditions

Page 45 of 100

5005

INDUSTRIE MECCANICHE DI BAGNOLO

Italy

5009

KAWASAKI HEAVY IND., LTD.

Japan

5011

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

5012

LARSEN AND TOUBRO LIMITED

India

5013

ISHIKAWAJIMA-HSRIMA HEAVY
INDUSTRIES CO.

Japan

5014

KOBE STEEL LIMITED

Japan

8336

GULF STEEL WORKS

Saudi Arabia

9864

BHI

Korea

10192

FUNKE

GERMANY

10898

STF SPA Italy

Italy

11028

Unimit Engineering

Thailand

Sub Category

HEAT EXCHANGERS: TUBE BUNDLE

No

Contractor Name

Location

4697

HITACHI ZOSEN

Japan

4705

HYUNDAI HEAVY INDUSTRIES CO., LTD.

ULSANKYVNGNAM,
KR

4718

KAWASAKI HEAVY IND., LTD.

Japan

4737

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4776

KOBE STEEL LIMITED

Japan

4788

OLMI

SUISO, IT

4870

BILFAL Heavy Industries Ltd

Saudi Arabia

4912

TAKAHASHI IRON WORKS CO., LTD.

Japan

4918

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4923

BATIGNOLLES TECHNOLOGIES
THERMIQUES

NANTES, FR

4933

HUDSON PRODUCTS CORPORATION

USA

4938

SASAKURA ENGINEERING CO., LTD.

Japan

4941

BROWN FINTUBE FRANCE SA

THONAN-LESBAINS, FR

4944

JAPAN STEEL WORKS, LTD.

Japan

4948

POSCO PLANTEC CO. LD

ULSAN CITY, KR

4966

BELLELI ENERGY SRL

MANTOVA, IT

Sunday, May 10, 2015

Limitations/Conditions

Page 46 of 100

4970

OFFICINE LUIGI-RESTA S.P.A.

SCANZOROSCIATE,
IT

4974

UNIT SUPERHEATER ENGINEERING, LTD.

United Kingdom

4976

HUGHES-ANDERSON HEAT EXCHANGERS,


IN

USA

4979

OHMSTEDE, INC.

USA

4983

SHELL AND TUBE INCORPORATED

USA

4987

HITACHI KASADO JYUKOGYO

Japan

4989

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4990

NIIGATA ENGINEERING CO., LTD.

Japan

9863

BHI

Korea

10826

CAMPI

Italy

Sub Category

HP Preheater

No

Contractor Name

Location

10257

Thermal Engineering International (TEI)

USA

Sub Category

Wet Surface Air Cooler (WSAC) / Closed Loop Cooling System

No

Contractor Name

Location

11220

Niagara Blower Heat Transfer Solutions

USA

11297

SPX Cooling Technologies, Inc.

USA

11303

GEA EGI Contracting

Hungary

Main Category

Limitations/Conditions

HEAVY STEEL STRUCTURE

Sub Category

HEAVY STEEL STRUCTURES FOR ST HALL, PIPE RACKS, ELECTRICAL AND


CONTROL BUILDING

No

Contractor Name

Location

6296

AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

8045

HIDADA LTD.

Saudi Arabia

8055

ZAMIL STEEL BUILDINGS

Saudi Arabia

8058

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

8943

ALFANAR STEEL

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

For:
- Gas Turbine Building Structure
- Substation Structures

Page 47 of 100

9802

Mabani Steel L.L.C

UAE

For:
-Gas Turbine Building Structure
-Substation Structures

9813

Albawardi Steel Industries

Saudi Arabia

for Pipe racks and pipe s;eepers, Process


equipment service platforms,Production
platform structure,Conveyor
structures,Structural steel buildings,Stair
stringers,Caged ladders Truss
members,Monorail beam,Fabricated
greetings,Compression and bearing
plates.

11638

Arabian International Company

United Arab
Emirates

None

Main Category

HP/ IP PIPES & SUPPORTS

Sub Category

HP/ IP PIPES & SUPPORTS

No

Contractor Name

Location

4859

AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

5284

TECHNIP

Germany

5285

LISEGA (IP/LP SUPPORTS ONLY)

Germany

5286

NORDON

France

5287

VALLOUREC -MANNESMANN

Germany

Main Category
Sub Category

HRSG

HRSG DUCT BURNERS

No

Contractor Name

Location

5146

COEN

Country of origin is
subject to SEC
approval

5147

FORNEY

Country of origin is
subject to SEC
approval

5148

JOHN ZINK

Country of origin is
subject to SEC
approval

Sub Category
No

Limitations/Conditions

HRSG FABRICATION SHOPS

Contractor Name

Sunday, May 10, 2015

Limitations/Conditions

Location

Limitations/Conditions
Page 48 of 100

8656

POSCO PLANTEC CO. LD.

Korea

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

8685

SEDAE ENERTECH

Korea

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
-Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

8741

BHI

Korea

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

8926

Yantai Hyundai Heavy Industries Co.Ltd

China

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Sunday, May 10, 2015

Page 49 of 100

8927

Hyundai Heavey Industries Co. Ltd. (HHI)

Korea

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

9172

S&T Corporation

Korea

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

9224

Daekjung Machinery & Engineering Co, Ltd Korea


(DKME)

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

9889

GS Entec Corp.

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS
- All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Sunday, May 10, 2015

Korea

Page 50 of 100

10058

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Vietnam

- All Engineering and Design work must


be reviewed and approved by SEC's
accepted OEM
- Components to be fabricated
following ASME procedures and shall
bear ASME stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

10569

ENERGOINSTAL Katowice

Poland

Only For:
1 - Tube Finning all Grades.
2 - Economizer coils in Material up to
Grade TP 22
- All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

11005

Al Zamil Heavy Industries Ltd.

Rabigh, Saudi

All Engineering and Design work must be


reviewed and approved by SEC's
accepted OEM.
- Components to be fabricated followinq
ASME
procedures and shall bear ASME stamp.
- Carbon steel material shall be sourced
only
from SEC approved vendor list.
- All sourced materials shall be as per
ASME,
ASTM, DIN, BS or JIS.

Sub Category

HRSG MANUFACTURERS

No

Contractor Name

Location

5143

DELTAK CORPORATION

USA

Sunday, May 10, 2015

Limitations/Conditions

Page 51 of 100

5144

NOOTER/ERIKSEN

USA

5145

Vogt Power International Inc.

USA

8644

CMI

Belgium

8683

STF SPA Italy

Italy

8684

NEM

Netherlands

9134

Standardkessel Baumgarte

Germany

10057

Doosan Engineering and Construction Co.,


Ltd

Korea

10059

IHI

Japan

10060

Mitsubishi Hitachi Power Systems (MHPS)

Japan

10062

Amec Foster Wheeler

Spain

10155

Ansaldo Caldaie S.p.A

Italy

10845

BERTSCH Energy

Bludenz , Austria

Sunday, May 10, 2015

1 - For horizontal type HRSG no


limitaions.
2 - For Vertical type HRSG All basic and
Detailed Engineering and Design works
to be carried out by Nooter/Eriksen,
USA based on the license agreement
with BERTSCH ENERGY, Austria. And the
manufacturing of all the HRSG
components (pressure and non-pressure
parts) to be done in SAUDI ARABIA.

Horizontal HRSG only

-Only for HRSG integrated with GTG


Model EA and below.
-Components to be fabricated following
ASME procedures and shall bear ASME
stamp.
- All alloy steel materials shall be
sourced only from West Europe, USA or
Japan.
- Carbon steel material shall be sourced
only from SEC approved vendor list.
- All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

Vertical type with the following


restriction:
A. maximum of 4 HRGS's per project of
the size typical behind E class GTG
machines.
B. Two pressure level only (HP&LP)
C. With HP steam parameter restricted
to following maximum continuous
rating (MCR)conditions:
1. Mass flow :150 t/hr
2.outlet steam temprture :540 C
3..outlet steam pressure :130 barg

Page 52 of 100

Main Category

LIQUID METER PROVERS; METER; PROVER; BI-DIRECTIONAL C/W ACCESSORIES

Sub Category

LIQUID METER PROVERS; METER; PROVER; BI-DIRECTIONAL C/W


ACCESSORIES

No

Contractor Name

Location

6443

FMC

USA

7675

DANIEL EUROPE LTD.

United Kingdom

7692

ALDERLEY SYSTEMS LTD

United Kingdom

7694

ALDERLEY FZE

UAE

7699

DANIEL MEASUREMENT & CONTORL

USA

Main Category

Lubrication Oil

Sub Category

LUBE OIL SYSTEM

No

Contractor Name

Location

5029

ROTAN

Germany

5216

BOLL & KIRCH

Germany

5217

OLTECHNIK

Germany

Main Category
Sub Category

TELE PROTECTION SYSTEM (TPS)

Contractor Name

Location

6508

ABB

SWEDEN /
Switzerland

6619

AREVA

France

6667

SIEMENS

Germany

Sub Category

Limitations/Conditions

METER RUNS; PREFABRICATED GAS METERING

METER RUNS; PREFABRICATED GAS METERING

No

Contractor Name

Location

6442

FMC

USA

7671

DANIEL EUROPE LTD.

United Kingdom

Sunday, May 10, 2015

Limitations/Conditions

Measuring Instruments & Transducers

No

Main Category

Limitations/Conditions

Limitations/Conditions

Page 53 of 100

7678

SOLARTRON ISA

United Kingdom

7691

ALDERLEY SYSTEMS LTD

United Kingdom

7693

ALDERLEY FZE

UAE

7696

IMTECH SYSTEMS BV

DEN BOSCH, NL

Main Category

Misc. Items

Sub Category

Hazardous Area Electrical Auxilliary Devices

No

Contractor Name

Location

Limitations/Conditions

9182

GOVAN

Australia

1-Lighting & Fixtures:


Model Type:Exe,Exd,Ex tD
2-Junction & Fixures:
Model Type:Exe,Exd,Exd,Ex tD
3- Receptacles & Plugs :
Model Type:Exd,Ex tD
4- Fitting & Accessories:
Model Type :Exe,Exd
5- Alarm & Signaling auxiliary Devices:
Model Type :Exde,Exd,Ex td
6- Enclosures & Control auxilliary
Devices:
Model Type : Exde,Exd,Ex tD

Main Category

Piping

Sub Category

MAIN & SECONDARY SEAWATER COOLING WATER PIPES (EXCEPT SEAWATER


PRE-STRESSED CONCRETE PIPE)

No

Contractor Name

Location

4858

AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

4900

HIDADA LTD.

Saudi Arabia

5141

AL-ZAMIL METAL WORKS

Saudi Arabia

5142

AMIANTIT FIBERGLASS INDUSTRIES


LIMITED

Saudi Arabia

Sub Category

PIPE FITTINGS ; BEND: PIPE; RETURN; ALLOY STEEL

No

Contractor Name

Location

5472

DYNAMIC PRODUCTS INCORPORATED

USA

5540

SPIE ENERTRANS

France

5564

BASSI LUIGI

Italy

5656

LADISH DIVISION/TRINITY INDUSTRIES

Russelville, Ar

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 54 of 100

5665

BENKAN KIRYU FACTORY

Japan

5680

BENKAN CORPORATION

Amagasaki-City

5789

BKL FITTINGS LTD.

United Kingdom

5801

TECNOFORGE SPA

Italy

5816

TECTUBI S.R.L.

Italy

5822

TUBACEX TAYLOR ACCESORIOS

Spain

5828

WESTFALENWERK GREBE K.G.

Germany

5834

ALASKAN COPPER WORKS

Seattle, Wa

5839

TUBE FORGING OF AMERICA

Portland, Or

5850

NIPPON BEND CO., LTD.

Japan

5864

SUNG KWANG BEND CO., LTD.

Korea

5882

TAE KWANG BEND INDUSTRIES CO., LTD.

Korea

11118

Global Pipe Company

Saudi Arabia

Sub Category

Seamless Alloy Pipes,Over 18"

No

Contractor Name

Location

9492

Wyman Gordon

USA

Main Category
Sub Category

DECENTRALISED PROGRAMMABLE CONTROLLERS (PLC)

Contractor Name

Location

7594

ALLEN BRADLEY (ROCKWELL


AUTOMATION)

USA

7945

ABB INSTRUMENTATION

PERO, IT

8008

SIEMENS-SIMATIC

Germany

8009

GENERAL ELECTRIC -FANUC

USA

8010

SCHNEIDER ELECTRIC -MODICON

France & USA

Sub Category

Limitations/Conditions

Pressure Vessel

FEEDWATER TANK AND DEAERATOR

No

Contractor Name

Location

4691

Mitsubishi Hitachi Power Systems (MHPS)

Japan

Sunday, May 10, 2015

Limitations/Conditions

PLC

No

Main Category

Longitudinal Submerged Arc Welded


(LSAW)

Limitations/Conditions

Page 55 of 100

4856

AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

4862

ARABIAN INTERNATIONAL CO.

Saudi Arabia

8742

BHI

Korea

9587

TSM Tech Co., Ltd.

Korea

9896

Tech International FZC

UAE

10075

Daechang HRSG Corporation

Korea

10077

GS Entec Corp.

Korea

10169

DBI Corporation

Korea

10174

Energyen Corporation

Korea

10292

S&T Corporation

Korea

10685

SEDAE ENERTECH

Korea

Sub Category


All Engineering and Design work must
be reviewed and approved by SEC's
accepted OEM

Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS FROM
38 MM THRU 76 MM(1.5 THRU 3 IN)

No

Contractor Name

Location

4594

BILFAL Heavy Industries Ltd

Saudi Arabia

4609

MARITIME INDUSTRIAL SERVICES

UAE

4614

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4621

RAMSIS ENGINEERING

Bahrain

4634

AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi Arabia

4642

ESCHER HOLLAND B.V

Netherlands

4649

FBM HUDSON ITALIANA SPA

Italy

4654

GENIUS VOS BV

Netherlands

Sunday, May 10, 2015

As fabrication shop only

Limitations/Conditions

Page 56 of 100

4659

IMS SPA INDUSTRIE MECCANICHE


SCARDELLATO SPA

4664

LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4669

BABCOCK ENERGY LTD.

United Kingdom

4677

SANTAZ-CENSA S.A.

PorrinoPontevedra, Spain

4688

HITACHI LTD.

Japan

4695

HITACHI ZOSEN

Japan

4703

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

4710

KAWASAKI HEAVY IND., LTD.

Japan

4725

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

4734

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4741

AALBORG CISERV INTERNATIONAL A/S

Denmark

4753

DOOSAN MECATEC CO. LTD.

Korea

4757

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4774

KOBE STEEL LIMITED

Japan

4780

MB FABRICATORS

United Kingdom

4785

OLMI

Italy

4794

ISHIKAWAJIMA-HSRIMA HEAVY
INDUSTRIES CO.

Japan

4800

ATB CALDERERIA SPA

Italy

4803

GENERAL WELDING WORKS, INC

USA

4805

TAYLOR FORGE ENGINEERED SYSTEMS,


INC.

Paola, KS

4810

STAHL-UND APPARATEBAU HANS LEFFER G Germany

4818

CHIYODA PROTECH CORPORATION

4820

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

9801

Tech International FZC

UEA

9867

BHI

Korea

10180

AL ZAMIL HEAVY INDUSTRIES LIMITED

Saudi Arabia

11048

BERTSCH Energy

Bludenz , Austria

Sunday, May 10, 2015

Italy

Japan

Stainless Steel, Design Pressure: 7 bar,


Dia:2550mm, length:17375mm and
thickness up to 48mm made as per
ASME as per division I & II
- Carbon Steel as per ASME VIII Div 1 & 2.

Page 57 of 100

Sub Category

PRESSURE VESSEL: CARBON STEEL AND LOW ALLOY, WALL THICKNESS


GREATER THAN 76 MM (3 IN)

No

Contractor Name

Location

4595

BILFAL Heavy Industries Ltd

Saudi Arabia

4643

ESCHER HOLLAND B.V

Netherlands

4650

FBM HUDSON ITALIANA SPA

Italy

4670

BABCOCK ENERGY LTD.

United Kingdom

4678

SANTAZ-CENSA S.A.

PorrinoPontevedra, Spain

4689

HITACHI

Japan

4696

HITACHI ZOSEN

Japan

4704

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

4711

KAWASAKI HEAVY IND., LTD.

Japan

4726

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

4730

MARITIME INDUSTRIAL SERVICES.

Sharjah, UAE

4735

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4746

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4754

DOOSAN MECATEC CO. LTD.

Korea

4758

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4775

KOBE STEEL LIMITED

Japan

4781

MB FABRICATORS

United Kingdom

4786

OLMI

Italy

4795

ISHIKAWAJIMA-HSRIMA HEAVY
INDUSTRIES CO.

Japan

4797

LARSEN AND TOUBRO LIMITED

India

4801

ATB CALDERERIA SPA

Italy

4806

TAYLOR FORGE ENGINEERED SYSTEMS,


INC.

Paola, KS

4811

STAHL-UND APPARATEBAU HANS LEFFER G Germany

4819

CHIYODA PROTECH CORPORATION

Japan

4821

OFFICINE LUIGI-RESTA S.P.A.

Italy

4822

IMS INDUSTRIE MECCANICHE


SCARDELLATO SPA

Italy

9868

BHI

Korea

Sunday, May 10, 2015

Limitations/Conditions

Page 58 of 100

10080

S&T Corporation

Korea

11049

BERTSCH Energy

Bludenz , Austria

Sub Category

PRESSURE VESSEL: NOT OTHERWISE LISTED (PROCESS DESIGNERS,


RECTANGULAR VESSELS, SMALL POTS, ETC.)

No

Contractor Name

Location

4605

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4610

MARITIME INDUSTRIAL SERVICES

UAE

4622

RAMSIS ENGINEERING

Bahrain

4625

AL-SAGHYIR STEAM BOILERS C.

Saudi Arabia

4635

AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi Arabia

4651

FBM HUDSON ITALIANA SPA

Italy

4655

GENIUS VOS BV

Netherlands

4665

LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4671

BABCOCK ENERGY LTD.

United Kingdom

4736

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4759

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4771

ENPRO SYSTEMS. INC.

USA

4807

TAYLOR FORGE ENGINEERED SYSTEMS,


INC.

Paola , KS

4812

STAHL-UND APPARATEBAU HANS LEFFER G Germany

4823

IMS INDUSTRIE MECCANICHE


SCARDELLATO SPA

Italy

4824

KCC PROCESS EQUIPMENT, LTD.

United Kingdom

4826

HASON STEEL PRODUCTS, INC.

Canada

4827

NATCO, DIV. OF NATIONAL TANK CO.

USA

4828

Peerless Mfg Co.

Wichita Falls, TX

4830

PERRY EQUIPMENT CORPORATION (PECO) Mineral Wells, TX

4831

TECHNOTHERM CORPORATION

Tulsa, OK

4835

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

Sunday, May 10, 2015


Components to be fabricated
following ASME procedures and shall
bear ASME stamp.

All sourced materials shall be as per
ASME, ASTM, DIN, BS or JIS

All materials above grade 22 shall be
sourced only from West Europe, USA or
Japan.

Limitations/Conditions

Page 59 of 100

4958

CAMPI

Italy

11050

BERTSCH Energy

Bludenz , Austria

Sub Category

PRESSURE VESSEL: CARBON STEEL, MAX. WALL THICKNESS OF 19 MM (0.75


IN).
Limitations/Conditions

No

Contractor Name

Location

4591

BILFAL Heavy Industries Ltd

Saudi Arabia

4597

DEUTCHE BABCOCK

UAE

4600

GEYAD FACTORY FOR PRESSURE VESSELS


AND STEEL STRUCTURES

Saudi Arabia

4603

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4606

GULF MARINE MAINTENANCE &


OFFSHORE SERVICES (GMMOS)

UAE

4607

MARITIME INDUSTRIAL SERVICES CO.,


LTD. (MIS) ARABIA

Saudi Arabia

4608

MARITIME INDUSTRIAL SERVICES

UAE

4611

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4619

RAMSIS ENGINEERING

Bahrain

4624

AL-SAGHYIR STEAM BOILERS C.

Saudi Arabia

4626

GULF STEEL WORKS

Saudi Arabia

4628

YANBU STEEL CO.

Saudi Arabia

4631

AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi Arabia

10689

HIDADA Company

Saudi Arabia

For Applications Up to 20 Bar and 150


C only.

10887

Al Zamil Metal Works Factory

Saudi Arabia

ASME Carbon Steel pressure vessel up


to 3.5 Bar and the connected piping.

Sub Category

PRESSURE VESSELS: CARBON STEEL AND LOW ALLOY, MAX. WALL THICKNESS
OF 38 MM (1.5 IN)

No

Contractor Name

Location

4592

BILFAL Heavy Industries Ltd

Saudi Arabia

4598

DEUTCHE BABCOCK

UAE

4604

GULF ENGINEERING CO. FOR HEAT


EXCHANGERS

Saudi Arabia

4612

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4620

RAMSIS ENGINEERING

Bahrain

4629

YANBU STEEL CO.

Saudi Arabia

4632

AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Page 60 of 100

4640

ESCHER HOLLAND B.V

Netherlands

4645

ROLLE SPA

Italy

4647

FBM HUDSON ITALIANA SPA

Italy

4653

GENIUS VOS BV

Netherlands

4661

STAHL-UND APPARATEBAU HANS LEFFER


GMBH

Germany

4663

LINDE A.G. PROCESS ENG.& CONTRACTING Germany

4667

BABCOCK ENERGY LTD.

United Kingdom

4675

SANTAZ-CENSA S.A.

PorrinoPontevedra, Spain

4683

SAUDER CUSTOM FABRICATION, INC.

Emporia, KS

4686

HITACHI LTD.

Japan

4693

HITACHI ZOSEN

Japan

4702

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

4723

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

4727

GULF MARINE MAINTENANCE &


OFFSHORE SERVICES (GMMOS)

UAE

4728

MARITIME INDUSTRIAL SERVICES.

Sharjah, UAE

4732

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4740

AALBORG CISERV INTERNATIONAL A/S

Denmark

4744

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4747

IMS INDUSTRIE MECCANICHE


SCARDELLATO SPA

Italy

4748

WARNER LEWIS INDUS. FILTER GMBH

Germany

4750

KAWASAKI HEAVY IND. LTD.

Japan

4751

DOOSAN MECATEC CO. LTD.

Korea

4755

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4770

ENPRO SYSTEMS. INC.

USA

4772

KOBE STEEL LIMITED

Japan

4778

MB FABRICATORS

United Kingdom

4782

WELLMAN ROBEY

United Kingdom

4783

OLMI

Italy

4791

GENERAL WELDING WORKS, INC

USA

Sunday, May 10, 2015

Page 61 of 100

4792

ISHIKAWAJIMA-HSRIMA HEAVY
INDUSTRIES CO.

Japan

8963

Unimit Engineering

Thailand

10171

DBI Corporation

Korea

11052

BERTSCH Energy

Bludenz , Austria

Sub Category

PRESSURE VESSELS: STAINLESS STEEL (SS) AND OTHER HIGH ALLOYS, NONFERROUS STEELS

No

Contractor Name

Location

4593

BILFAL Heavy Industries Ltd

Saudi Arabia

4613

OLYAN DESCON ENGINEERING COMPANY

Saudi Arabia

4633

AL-ZAMIL COMPANY FOR HEAVY STEEL

Saudi Arabia

4641

ESCHER HOLLAND B.V

Netherlands

4648

FBM HUDSON

Italy

4658

IMS SPA INDUSTRIE MECCANICHE


SCARDELLATO SPA

Italy

4668

BABCOCK ENERGY LTD.

United Kingdom

4676

SANTAZ-CENSA S.A.

PorrinoPontevedra,Spain

4684

SAUDER CUSTOM FABRICATION, INC.

Emporia, KS

4687

HITACHI LTD.

Japan

4694

HITACHI ZOSEN

Japan

4709

KAWASAKI HEAVY IND., LTD.

Japan

4724

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

4729

MARITIME INDUSTRIAL SERVICES.

Sharjah, UAE

4733

SUMITOMO HEAVY INDUSTRIES, LTD.

Japan

4745

NANKAI CHEMICAL ENGNEERING CO., LTD. Japan

4749

WARNER LEWIS INDUS. FILTER GMBH

Germany

4752

DOOSAN MECATEC CO. LTD.

Korea

4756

Mitsubishi Hitachi Power Systems (MHPS)

Japan

4773

KOBE STEEL LIMITED

Japan

4779

MB FABRICATORS

United Kingdom

4784

OLMI

Italy

4793

ISHIKAWAJIMA-HSRIMA HEAVY
INDUSTRIES CO.

Japan

Sunday, May 10, 2015

Limitations/Conditions

Page 62 of 100

4796

LARSEN AND TOUBRO LIMITED

India

4799

ATB CALDERERIA SPA

Italy

4802

GENERAL WELDING WORKS, INC

USA

4804

TAYLOR FORGE ENGINEERED SYSTEMS,


INC.

Paola, KS

4808

TAKAHASHI IRON WORKS CO. LTD.

Japan

4809

STAHL-UND APPARATEBAU HANS LEFFER G Germany

4815

LINDE A.G. PROCESS ENG. &


CONTRACTING

Germany

4816

ENPRO SYSTEMS. INC.

USA

4817

NIPPON SANSO K.K.

Japan

11022

BERTSCH Energy

Bludenz , Austria

11030

Unimit Engineering

Thailand

11323

GE Nuovo Pignone SPA

Italy

Only For :
Capacity up to 2000 ton and 200 mm
thickness.

Limitations/Conditions

Main Category

Process Skid Packages

Sub Category

Chemical Injection Skid

No

Contractor Name

Location

11114

Baric SYSTEMS Middle East Ltd.

Saudi Arabia

Sub Category

Fuel Skid

No

Contractor Name

Location

Limitations/Conditions

9239

Integrated Flow Solutions

USA

For Following :1. Fuel oil (Unloading /


Transfer) Skids
Packages(unloading,transfer,forwarding
and heating skids)2. Fuel Gas System
Skids Packages for Natural Gas cleaning
and conditioning

10096

ZAMIL STEEL INDUSTRIES PED

Saudi Arabia

Fuel oil Skid

10760

Baric SYSTEMS Middle East Ltd.

Saudi Arabia

Fuel oil Skid

11299

Zamil Steel Co.

Saudi Arabia

Gas Fuel Handling Skid

Limitations/Conditions

Sub Category

Water Injection Skid

No

Contractor Name

Location

11113

Baric SYSTEMS Middle East Ltd.

Saudi Arabia

Sunday, May 10, 2015

Page 63 of 100

Main Category

Protective Relays

Sub Category

RELAY & CONTROL PANEL


Limitations/Conditions

No

Contractor Name

Location

6575

HAWA ELECTRIC PANEL

Saudi Arabia

6576

REMAL FACTORY

Saudi Arabia

6598

ABB/AEIL

Saudi Arabia

6694

VA TECH

Saudi Arabia

6700

WESCOSA

Saudi Arabia

6710

EPS LTD.

Saudi Arabia

6712

ETA-PCS

UAE

Type/design, special, routine tests shall


be performed for first project at an
independent laboratory in the presence
of 3rd party & 3 SEC Engineers.
Extended warranty for 10 years.

7409

AL-FANAR ELECTRICAL SYSTEM

Saudi Arabia

UP TO 132kV ONLY, IP41 TYPE TEST IS


REQUIRED IN FIRST SUPPLY.

7411

MOHD. AL-OJAIMI LTD.

Saudi Arabia

7415

TIEPCO

Saudi Arabia

9886

JAL INTERNATIONAL

Saudi Arabia

10948

USSG Energy Insight

Saudi Arabia

Main Category
Sub Category

Reactors

110 KV TO 132 KV REACTORS

No

Contractor Name

Location

6486

ABB

SWEDEN

6606

AREVA

France

6640

JAPAN AE POWER SYSTEMS CORP.

Japan

Sunday, May 10, 2015

1-Up to 132KV
2-Extended warranty in respect of
defects due to
Desgine,manufacturing,and
workmanship for ten years for the first
project & susbsequently redused yearly
for onwards projects.
3-Subject to technical evaluation fo
acceptance to each project.

Limitations/Conditions

Page 64 of 100

6684

TMT&D CORP.

6792

Siemens Transformers Austria GmbH & Co Weiz, Austria


KG

6816

TRAFO-UNION (SIEMENS)

Sub Category

Japan

Germany

230 KV OIL IMMERSED REACTORS

No

Contractor Name

Location

6487

ABB

SWEDEN

6585

ABB ( T& D)

USA

6607

AREVA

France

6641

JAPAN AE POWER SYSTEMS CORP.

Japan

6685

TMT&D CORP.

Japan

6817

TRAFO-UNION (SIEMENS)

Germany

Sub Category

33 KV TO 69 KV OIL IMMERSED REACTORS

No

Contractor Name

Location

5064

SIEMENS

Germany

6485

ABB

SWEDEN

6605

AREVA

France

6639

JAPAN AE POWER SYSTEMS CORP.

Japan

6683

TMT&D CORP.

Japan

6791

Siemens Transformers Austria GmbH & Co Austria


KG

6815

TRAFO-UNION (SIEMENS)

Sub Category

Limitations/Conditions

Germany

380 KV OIL IMMERSED REACTORS

No

Contractor Name

Location

6488

ABB

SWEDEN

6608

AREVA

France

6642

JAPAN AE POWER SYSTEMS CORP.

Japan

6686

TMT&D CORP.

Japan

6793

Siemens Transformers Austria GmbH & Co Weiz, Austria


KG

6818

TRAFO-UNION (SIEMENS)

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Germany

Page 65 of 100

Main Category

Service Gases

Sub Category

CO2 PLANT

No

Contractor Name

Location

6346

AHG

Saudi Arabia

6347

SIGAS

Saudi Arabia

6348

AT&V

Saudi Arabia

Sub Category

Limitations/Conditions

HYDROGEN GENERATION AND STORAGE


Limitations/Conditions

No

Contractor Name

Location

6467

Hydrogenics Co.

Canada \ Belgium

6468

TELEDYNE

USA

8912

Proton Energy Systems

USA

H & C Series hydrogen generators

9416

Daiki Ataka Engineering Co., Ltd

Japan

Model No./Capacity (Nm3/h)


HS0810 / 10
HS0830 / 30
HS0860 / 60

Main Category
Sub Category

Steam Turbine

STEAM TURBINE & GENERATOR


Limitations/Conditions

No

Contractor Name

Location

139

General Electric (GE)

USA

5104

Mitsubishi Hitachi Power Systems (MHPS)

Japan

6538

TOSHIBA CORPORATION

Japan

6539

SIEMENS

Goerlitz &
Munlheim,
Germany/Charlotte,
USA

6554

DOOSAN HEAVY INDUSTRIES AND


CONSTRUCTION CO. LTD.

Korea

- LTSA shall be provided for sub-critical


SteamTurbine.

8461

ANSALDO ENERGIA S.p.A.

Italy

Up to 350 MW for 60 Hz
Models:
(
MT5/10,MT15,MT20,and RT20/30)

Sunday, May 10, 2015

Page 66 of 100

8671

Fuji Electric Co, Ltd

Japan


(Reheat Steam ) HMN Series Three
& four cylinder type Output Range 200
MW 350 MW

(Reheat Steam ) KN Series 2 casing
combined HP and IP and separate LP
Turbine. Output range 100MW -350MW

(Reheat Steam ) SCRH Single Casing
axial Exhaust for Combined Cycle Power
Plant. Output Range 80-160 MW.

(Reheat Steam ) FET R - Single
Casing axial Exhaust for Combined Cycle
Power Plant Output Range 50-120 MW.

(Non-Reheat Steam ) FET + N Two
casing, separate LP Turbine, for
Combined Cycle Power Plant Output
Range 75-250 MW

(Non-Reheat Steam ) FET Single
Casing Turbine for Combined Cycle
Power Plant Output Range 20-230 MW.

8959

DOOSAN /SKODA POWER

Czech Republic

Model MTD40C,MTD50 and MTD60


with a maximum LSB of 27 only

11253

GE Nuovo Pignone SPA

Italy

Only for :
A5, A9 series, SG series, SDF series,
MP/MC series,

Sub Category

STEAM TURBINE NON-RETURN VALVES

No

Contractor Name

Location

5119

Adams Armaturen GmbH

Germany

5125

SEMPELL

Germany

Main Category

Structural Steel

Sub Category

Structural Steel Erection For ST Hall, pipe rack, HV Cable rack, electrical and
control building and Misc.

No

Contractor Name

Location

8136

HIDADA LTD.

Saudi Arabia

8160

Zamil Structural Steel Co

Saudi Arabia

8162

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

8163

SHAMRANY INDUSTRIAL GROUP/BOURNE

Saudi Arabia

8229

SAUDI METIN

Saudi Arabia

8230

Al Zamil Heavy Ind

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 67 of 100

Main Category

STRUCTURAL STEEL / PRE-ENGINEERED BUILDINGS

Sub Category

STRUCTURAL STEEL / PRE-ENGINEERED BUILDINGS


Limitations/Conditions

No

Contractor Name

Location

4867

SAUDI METIN

Saudi Arabia

8043

Zamil Structural Steel Co

Saudi Arabia

8123

HIDADA LTD.

Saudi Arabia

8124

SAUDI BUILDING SYSTEM

Saudi Arabia

8126

Al Zamil Heavy Ind

Saudi Arabia

8127

SAUDI METAL COATING CO. Ltd.

Saudi Arabia

8128

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

9131

Energya Steel Solutions

Saudi Arabia

10460

BEMCO Steel Industries (BSI)

Saudi Arabia

10586

EMIRATES Building System CO.LLC. (EBS)

UAE

10683

Al Shafar Steel Engineering LLC (ASSENT)

UAE

10799

SHARQ FACTORY

Saudi Arabia

Non Industrial Buildings.

10991

Young Hwa (RAK)

United Arab
Emirates

Only For : Ducting & Casing

10992

INCO International

United Arab
Emirates

Main Category
Sub Category

Substation Equipment

CIRCUIT BREAKER, OUTDOOR, 34.5 KV TO 230 KV

No

Contractor Name

Location

6577

ABB POWER T & D CO.

USA

6578

SIEMENS POWER T&D

USA

Sub Category

Limitations/Conditions

CIRCUIT SWITCHER, 69 230 KV

No

Contractor Name

Location

6649

S&C

Canada

6663

SIEMENS

Germany

Sunday, May 10, 2015

All engineering and design works to be


done by the EPC contractor

Limitations/Conditions

Page 68 of 100

Sub Category

DEADTANK SF6 BREAKERS, 230 KV

No

Contractor Name

Location

6588

ABB ( T& D)

USA

6612

AREVA

USA

6646

JAPAN AE POWER SYSTEMS CORP.

Japan

6690

TMT&D CORP.

Japan

7342

GE-HITACHI HVB

USA

Sub Category

DEADTANK SF6 BREAKERS, 69 KV

No

Contractor Name

Location

6586

ABB ( T& D)

USA

6610

AREVA

USA

6644

JAPAN AE POWER SYSTEMS CORP.

Japan

6688

TMT&D CORP.

Japan

7340

GE-HITACHI HVB

USA

Sub Category

Contractor Name

Location

6503

ABB

Switzerland

6587

ABB ( T& D)

USA

6611

AREVA

USA

6645

JAPAN AE POWER SYSTEMS CORP.

Japan

6660

SIEMENS

USA

6689

TMT&D CORP.

Japan

7341

GE-HITACHI HVB

USA

Contractor Name

Location

6505

ABB

SWEDEN

6614

AREVA

France

6662

SIEMENS

Germany

No

Limitations/Conditions

LIVE TANK, 69 KV SF6 BREAKER

Contractor Name

Sunday, May 10, 2015

Limitations/Conditions

LIVE TANK, 110 132KV, 230KV & 23KV SF6 BREAKER

No

Sub Category

Limitations/Conditions

DEADTANK SF6 BREAKERS,110 - 132 KV

No

Sub Category

Limitations/Conditions

Location

Limitations/Conditions

Page 69 of 100

6504

ABB

SWEDEN

6613

AREVA

France

6661

SIEMENS

Germany

7343

ABB SWITCHGEAR AB

SWEDEN,
LUDUVIKA

Sub Category

LOAD BREAK SWITCHES UPTO 34.5 KV

No

Contractor Name

Location

6597

ABB/AEIL

Saudi Arabia

6615

AREVA

France

6648

KONCAR

CROATIA

6664

SIEMENS

Germany

6709

EPS LTD.

Saudi Arabia

7165

HITACHI

Japan

7346

FRITZ DRIESCHER

Germany

Sub Category

LONG ROD PORCELAIN INSULATORS UP TO 380 KV

No

Contractor Name

Location

6658

SIEMENS

Germany

7198

PPC INSULATORS

Germany

7207

LAPP

Germany

7210

NGK

Japan

Sub Category

Contractor Name

Location

6518

ABB

SWEDEN

6677

SIEMENS

Germany

7466

ABB/ADDA

Italy

Limitations/Conditions

SURGE ARRESTERS, STATION CLASS UP TO 380 KV

No

Contractor Name

Location

6502

ABB

Germany

6609

AREVA

France

6643

JAPAN AE POWER SYSTEMS CORP.

Japan

6659

SIEMENS

Germany

Sunday, May 10, 2015

Limitations/Conditions

MOBILE S/S, 110 - 132 /13.8KV

No

Sub Category

Limitations/Conditions

Limitations/Conditions

Page 70 of 100

6687

TMT&D CORP.

Japan

7329

ABB HV TECHNOLOGIES

Switzerland

7332

BOWTHORPE

United Kingdom

7333

COOPER (MCGRAW-ED)

USA

7335

ELPRO INTL. LTD

India

7336

OHIO BRASS

USA

7337

TRIDELTA

Germany

7339

AE POWER

Japan

Sub Category

UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY

No

Contractor Name

6808

CG Power Systems Belgium NV/ Mechelen Belgium


Plant

6838

ABB (BBC SECHERON)

Main Category

Location

Switzerland,
GENEVA

SUBSTATION STEEL STRUCTURE (LATTICED)

Sub Category

SUBSTATION STEEL STRUCTURE (LATTICED)

No

Contractor Name

Location

7264

AL BABTAIN

Saudi Arabia

7267

AL ZAMIL STEEL

Saudi Arabia

7269

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

7272

GEYAD FOR COMMERCE & IMPORT CO.


LTD.

Saudi Arabia

7273

HIDADA LTD.

Saudi Arabia

7279

NAJEM

Saudi Arabia

Main Category
Sub Category

Limitations/Conditions

Limitations/Conditions

Switchgears

AC & DC DIST. PANELS

No

Contractor Name

Location

Limitations/Conditions

643

WESCOSA

Saudi Arabia

ONLY TYPES SAS 600/2000/5000 AND


MUST BE EQUIPPED WITH HINGED REAR
DOORS FACTORY: DAMMAM

8837

AL-FANAR ELECTRICAL SYSTEM

Saudi Arabia

UP TO 5000A AC & 250A DC

Sunday, May 10, 2015

Page 71 of 100

8841

ETA-PCS

UAE

9020

ABB/AEIL

Saudi Arabia

9022

EAST & WEST FACTORY

Saudi Arabia

9023

ELECTRICAL PANEL BOARD


FACTORY/HAWA TRADING

Saudi Arabia

9024

EPS (GROUPE SCHNEIDER)

Saudi Arabia

9026

MOHAMMAD AL OJAIMI FACTORY

Saudi Arabia

9027

MUSAID SWITCHGEAR

Saudi Arabia

9028

REMAL

Saudi Arabia

9029

SIEMENS

Saudi Arabia

10599

USSG Energy Insight

Saudi Arabia

11239

Nour Industries

Saudi Arabia

using Siemens SIVACON Software.

Sub Category

For :1600A/380V(indoor) :
Extended warranty for 10 years.

DC SWITCHBOARD

No

Contractor Name

Location

Limitations/Conditions

9010

ABB

Saudi Arabia

None

9011

SCHNEIDER ELECTRIC

Saudi Arabia

None

9012

GE

Saudi Arabia

None

Sub Category

Generator circuit breaker

No

Contractor Name

Location

8074

ABB

Switzerland

8076

SIMENES

Germany

Sub Category

Limitations/Conditions

METAL CLAD SWITCHGEAR, INDOOR, LOW-VOLTAGE

No

Contractor Name

Location

Limitations/Conditions

8921

ABB

Saudi Arabia

-LV Switchgear (MNS Series ).

8987

ABB POWER T & D COMPANY

USA

K-Line

8988

ABB ELECTRICAL IND. CO., LTD. (AEIL)

Saudi Arabia

ABB K-Line (Under License from ABB) ,


Siemens Type R/RL

8990

ARABIAN POINT EIGHT POWER

Saudi Arabia

LIMITATION:
- Sen Plus model, Up 4000 A, 80 kA.
- Make: GE Poland.
Conditions:
Extended (10) years warranty for first
order of each rating.

Sunday, May 10, 2015

Page 72 of 100

8991

CUTLER-HAMMER

USA

Type DSII

8992

ELECTRICAL POWER DISTRIBUTION


BOARDS & SWITCHGEAR (EPS)

Saudi Arabia

None

8993

GENERAL ELECTRIC

USA

Type AKD

8995

POINT EIGHT POWER

USA

Cutler-Hammer DSII breaker assembly

8996

SIEMENS ENERGY AND AUTOMATION

USA

Type R/RL

8997

SQUARE D

USA

Class 6035 Cutler-Hammer

8998

WESCOSA

Saudi Arabia

Type DSII (Under License to CutlerHammer)

9154

HYUNDAI HEAVY INDUSTRIES CO.Ltd

Korea

9273

Nour Industries

Saudi Arabia

- Siemens Sivacon.
- Ten (10) Years extended warranty.

11514

Electronic & Electrical Industries


Corporation (EEIC)

Saudi Arabia

for switchgear :SEN Plus 1600A, 2000A,


3200A, 4000A, 5000A and 6400A.
Air Circuit Breaker: EntelliGuard type,
GE Poland.
MCCB: Record Plus type, GE Poland.
For Motor control center : SEN Plus
1600A, 2000A, 3200A and 4000A.
Maximum operation current on the
main bus bar: 3500A at 40C.
Air Circuit Breaker: EntelliGuard type,
GE Poland.
MCCB: Record Plus type, GE Poland.

11671

ARABIA ELECTRIC, LTD. (Equipment)

Sub Category

Saudi Arabia

METAL CLAD SWITCHGEARS: 13.8 kV UP TO 34.5 kV

No

Contractor Name

Location

8753

ABB ( T& D)

USA

8754

ABB/AEIL

Germany

8755

ABB-CALOR EMAG

Germany

8757

AREVA

Germany

8758

EPS (GROUPE SCHNEIDER)

Saudi Arabia

8759

JAPAN AE POWER SYSTEMS CORP.

Japan

8760

S&C

USA

8761

SIEMENS

USA

Sunday, May 10, 2015

LIMITATIONS:
- Sivacon S8 Type.
- Up to 6300A, 100KA
CONDITIONS:
- NIL

Limitations/Conditions

None

Page 73 of 100

8762

TMT&D CORP.

Japan

8763

VA TECH

France

8999

WAHAH ELECTRIC SUPPLY CO. (WESCOSA) Saudi Arabia

11231

ARABIAN POINT EIGHT POWER

Saudi Arabia

Point Vac C , Point Vac G from Square


D

11232

POINT EIGHT POWER

USA

Point Vac C , Point Vac G

Sub Category

METAL-CLAD SWITCHGEAR, INDOOR 1 TO 13.8 kV

No

Contractor Name

Location

Limitations/Conditions

8658

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

HMS type, Up to 13.8 KV with rated


current up to 3150A @50 C Ambient

8768

ABB POWER T & D CO.

USA

8770

ABB ELECTRICAL IND. CO., LTD. (AEIL)

Saudi Arabia

8772

CUTLER HAMMER

USA

Vac-Clad W

8773

ELECTRICAL POWER DISTRIBUTION


BOARDS & SWITCHGEAR (EPS)

Saudi Arabia

None

8774

GENERAL ELECTRIC

USA

Type PowerVac

8775

SIEMENS POWER T&D

USA

GM/GMI Type

8776

SQUARE D / GROUPE SCHNIEDER

USA

Class 6055/VAD-3

8984

WAHAH ELECTRIC SUPPLY CO.


(WESCOSA)

Saudi Arabia

Based on POWEL VAC

8985

ARABIAN POINT EIGHT POWER

Saudi Arabia

Point Vac C , Point Vac G from Square


D

8986

POINT EIGHT POWER

USA

Point Vac C , Point Vac G

10890

Electronic & Electrical Industries


Corporation(EEIC)

Saudi Arabia

Hyundai medium voltage air-insulated


metal clad switchgear (HMS) type up to
13.8 with rated current up to 3150 A at
50^ C ambient.

Sub Category

METAL-CLAD SWITCHGEAR, INDOOR 1 TO 38 kV

No

Contractor Name

Location

Limitations/Conditions

11245

ARABIA ELECTRIC, LTD. (Equipment)

Saudi Arabia

LIMITATIONS:
- NXAIR Type
- Up to 17.5 Kv, 4000 A, 50 kA / 3s.
CONDITIONS:
- Guarantee / Warranty letter from
Siemens.
- Extended (10) years warranty for first
order of each rating.

Sunday, May 10, 2015

Page 74 of 100

Sub Category

MOTOR CONTROL CENTERS


Limitations/Conditions

No

Contractor Name

Location

6759

POWELL (ONLY IF PART OF PACKAGE)

Country of origin is
subject to SEC
approval

6760

ALLEN BRADLEY

Country of origin is FOR 480V MCC, 4160V MCC


subject to SEC
approval

6761

CUTLER HAMMER

USA / United
Kingdom

FOR 480V MCC, 4160V MCC

8916

ABB ELECTRICAL IND. CO., LTD. (AEIL)

Saudi Arabia

- MCC(MNS Series).

9155

HYUNDAI HEAVY INDUSTRIES CO.Ltd

Korea

9757

Nour Industries

Saudi Arabia

-Siemens Sivacon.
- Ten (10) Years extended warranty.

9851

Electronic & Electrical Industries


Corporation (EEIC)

Saudi Arabia

for switchgear :SEN Plus 1600A, 2000A,


3200A, 4000A, 5000A and 6400A.
Air Circuit Breaker: EntelliGuard type,
GE Poland.
MCCB: Record Plus type, GE Poland.
For Motor control center : SEN Plus
1600A, 2000A, 3200A and 4000A.
Maximum operation current on the
main bus bar: 3500A at 40C.
Air Circuit Breaker: EntelliGuard type,
GE Poland.
MCCB: Record Plus type, GE Poland.

10592

EPS (GROUPE SCHNEIDER)

Saudi Arabia

11670

ARABIA ELECTRIC, LTD. (Equipment)

Saudi Arabia

Sub Category

LIMITATIONS:
- Sivacon S8 Type.
- Up to 6300A, 100KA
CONDITIONS:
- NIL

SWITCHRACK, OUTDOOR LOW VOLTAGE

No

Contractor Name

Location

Limitations/Conditions

9014

ARABIAN POINT EIGHT POWER

Saudi Arabia

None

9017

REMAL

Saudi Arabia

None

9018

WESCOSA

Saudi Arabia

None

9019

JEDDAH ELECTRICAL DISTRIBUTION

Saudi Arabia

None

Sunday, May 10, 2015

Page 75 of 100

Main Category

T/L STEEL STRUCTURE (LATTICED) UP TO 380KV

Sub Category

T/L STEEL STRUCTURE (LATTICED) UP TO 380KV

No

Contractor Name

Location

7265

AL BABTAIN

Saudi Arabia

7268

AL ZAMIL STEEL

Saudi Arabia

7270

ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

7274

HIDADA LTD.

Saudi Arabia

7280

AL-SALAM

Saudi Arabia

Main Category

Limitations/Conditions

Tanks

Sub Category

Fuel/Oil Storage Tanks/Water Storage Tanks, etc*


Limitations/Conditions

No

Contractor Name

Location

8194

Arabian CBI Ltd.

Saudi Arabia

8195

SAUDI METAL COATING CO. Ltd.

Saudi Arabia

8196

Al Zamil Heavy Industries

Saudi Arabia

8197

ARABIAN TANK & VESSEL

Saudi Arabia

9950

HIDADA LTD.

Saudi Arabia

9951

Bakri International Energy

Saudi Arabia

10095

ZAMIL STEEL INDUSTRIES PED

Saudi Arabia

No Limitation

11110

Al Zamil Metal Works Factory

Saudi Arabia

Storage Tanks including coating and


replacement of slall size and up to
50,000m3 as rebuilt; associated
pipe,linings,connections for fuel
oil,distillate oil,crude
oil,gas,chemicals,and water,and
structural steel assemblies for support
of pipe and conveyance equipment.

11608

Metscco Heavy Steel Industries Co. Ltd.

Saudi Arabia

Up to 50,000m^3 for Fuel/Oil Storage


Tanks

Main Category
Sub Category
No

TIAK system

Vendor approved for TIAK system

Contractor Name

Sunday, May 10, 2015

Location

Limitations/Conditions
Page 76 of 100

8372

Howden

Main Category

USA / England
Torque Converting Systems

Sub Category

VARIABLE FREQUENCY DRIVES


Limitations/Conditions

No

Contractor Name

Location

6540

SIEMENS

Germany

6550

GENERAL ELECTRIC

USA

6564

ALLEN-BRADLEY

USA

6566

CUTLER HAMMER

USA / United
Kingdom

6568

SIEMENS ENERGY AND AUTOMATION

USA

6720

ABB INDUSTRY OY

HELSINKI, FINLAND Less than 1 KV

6721

CONTROL TECHNIQUES / EMERSON

United Kingdom

6722

TELEMECANIQUE OR SQUARE
D/TELEMECANIQUE

RUE ANDRE
Less than 1 KV
BLANCHET, FRANCE

6723

TOSHIBA

USA

6726

ABB INDUSTRIE AG

TURGI, Switzerland

6727

HILL GRAHAM CONTROLS

United Kingdom

6728

ROBICON

USA

6729

SAFTRONICS

Country of origin is
subject to SEC
approval

6730

DANFOSS

Country of origin is
subject to SEC
approval

8427

NIDEC Ansaldo Sistemi Industriali S.P.A

Italy

9961

GE Energy Power Conversion

France

Main Category

Less than 1 KV

-Water Cooled SFC up to 24MVA.


-Air Cooler SFC up to 10.4MVA.

Transformers

Sub Category

110 132KV, 230KV & 380KV CTS

No

Contractor Name

Location

6513

ABB

SWEDEN

6595

ABB ( T& D)

USA

Sunday, May 10, 2015

Less than 1 KV

Limitations/Conditions

Page 77 of 100

6624

AREVA

United Kingdom

6693

VA TECH

Italy

7367

HAEFELY-TRENCH ELECTRIC

Switzerland

7381

NISSIN

Japan

7387

RITZ

USA

7395

KUHLMAN ELECTRIC CORPORATION

USA

7398

KWK MESWANDLER

Germany

7401

PFIFFNER

Switzerland

7404

SADTEM

France

7407

STE

Italy

Sub Category

110 132KV, 230KV, 380KV POTENTIAL TRANSFORMERS

No

Contractor Name

Location

6511

ABB

SWEDEN

6592

ABB ( T& D)

USA

6622

AREVA

United Kingdom

7365

HAEFELY-TRENCH ELECTRIC

Switzerland

7379

NISSIN

Japan

7385

RITZ

USA

8631

HAEFELY-TRENCH ELECTRIC

France

Sub Category

Limitations/Conditions

Auxiliary Transformers
Limitations/Conditions

No

Contractor Name

Location

6476

ABB

Riyadh, Saudi Arabia Voltage : MV / LV.


Capacity : 4 MVA.

6771

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

Voltage : MV / LV.
Capacity : 4 MVA.

8573

WESCOSA

Dammam, Saudi
Arabia

Voltage : MV / LV.
Capacity : 4 MVA.

8574

Schneider Electric

Gebze, Turkey

Voltage : MV / LV.
Capacity : 4 MVA.

8575

ABB

Karte, Turkey

Voltage : MV / LV.
Capacity : 4 MVA.

8576

BEST

Balikesir, Turkey

Voltage : MV / LV.
Capacity : 4 MVA.

8624

SAUDI TRANSFORMERS CO.

Dammam, Saudi
Arabia

Voltage : MV/LV
Capacity : 2 MVA.

Sunday, May 10, 2015

Page 78 of 100

8908

Alfanar Trading.

Sub Category

Riyadh, Saudi Arabia Voltage : 13.8 kV.


Capacity : 630 KVA.
With cooling fins.

CCPD/CCVT, 69KV UP TO 380 KV

No

Contractor Name

Location

6509

ABB

SWEDEN

6691

VA TECH

Italy

7331

ABB HV TECHNOLOGIES

Switzerland

7362

HAEFELY-TRENCH ELECTRIC

Canada

7371

GE

USA

7376

NISSIN

Japan

7382

PASSONI & VILLA

Italy

7383

RITZ

USA

Sub Category

Limitations/Conditions

GENERATOR UNIT TRANSFORMERS (GUT)

No

Contractor Name

Location

Limitations/Conditions

8347

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

Voltage : 380 kV.


Capacity : 600 MVA.
Including (3) windings trafo.

8562

HITACHI

Kokubu, Japan

Voltage : No Limitation.
Capacity : No Limitation.
Including (3) windings trafo

8563

ABB

ludvika, Sweden

Voltage : No Limitation.
Capacity : No Limitation.
Including (3) windings trafo.

8565

ABB

Kln, Germany

Voltage : 380 kV.


Capacity : 300 MV.
Only (2) windings trafo.

8567

SIEMENS

Nurenburg,
Germany

Voltage : No Limitation.
Capacity : No Limitation.
Including (3) windings trafo.

8568

ABB

Kartel, Turkey

Voltage : 380 kV.


Capacity : 300 MVA.
Including (3) windings trafo.

8569

Siemens Transformers Austria GmbH & Co Weiz, Austria


KG

Voltage : 380 kV.


Capacity : 600 MVA.
Including (3) windings trafo.

8668

SMIT TRANSFORMER B.V.

Voltage : No Limitation.
Capacity : No Limitation.
Including (3) windings trafo.

Sunday, May 10, 2015

Netherlands

Page 79 of 100

8670

ABB

Cordoba, Spain

Voltage : 380 kV.


Capacity : 300 MVA.
Including (3) windings trafo.

8918

BEST

Balikesir, Turkey

Voltage : 380 kV.


Capacity : 300 MVA.
Only (2) windings trafo.

9290

Fortune Electric Company

TauYuan,Taiwan

Voltage : 132 kV.


Capacity : 250 MVA.
Only (2) windings trafo.
- Kuan Yin II Plant.
For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

9834

CG Power Systems Belgium NV.

Mechelen, Belgium Voltage : 380 kV.


Capacity : 300 MVA
Including (3) windings trafo.

9837

CG Electric System Hungary zrt.

Tapioszele, Hungary Voltage : 132 kV


Capacity : 120 MVA
Only (2) windings trafo.

10052

Zaporozhtransformator PJSC (ZTR)

Zaporozhye,
Ukraine

Voltage : 380 kV
Capacity : 300 MVA.
Including (3) windings trafo.

10346

Fuji Electric Co., Ltd.

Chiba, Japan

Voltage : 380 kV
Capacity : 300 MVA.
Including (3) windings trafo.
-In case of two LV windings, it shall be
radial split windings.

11117

SIEMENS

Dresden, Germany

Voltage : 132 kV.


Capacity : 120 MVA.
Only (2) windings trafo.

Sub Category

STATION SERVICE TRANSFORMER (SST)

No

Contractor Name

Location

Limitations/Conditions

8412

TBEA

Xinjiang, China

Voltage : 132 kV
Capacity : 63 MVA.
Only (2) windings trafo.

8445

EMCO Ltd.

Thane, India

Voltage : 132 kV
Capacity : 63 MVA.
Only (2) windings trafo.

8455

Toshiba Corporation

Kawasaki, Japan

Voltage : 132 kV
Capacity : 63 MVA.
Only (2) windings trafo.

Sunday, May 10, 2015

Page 80 of 100

8793

SMIT TRANSFORMER B.V.

Netherlands

Voltage : No Limitation.
Capacity : No Limitation.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

9073

ABB

Cordoba, Spain

Voltage : No Limitation.
Capacity : 63 MVA.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

9183

ABB

ludvika, Sweden

Voltage : No Limitation.
Capacity : No Limitation.
Including (2) windings trafo. With
tertiary.
Including (3) windings trafo. With
tertiary.

9184

ABB

Kln, Germany

Voltage : No Limitation.
Capacity : 63 MVA.
Including (2) windings trafo. With
tertiary.
Including (3) windings trafo with
tertiary.

9185

ABB

Kartel, Turkey

Voltage : No Limitation.
Capacity : 63 MVA.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo. With
tertiary.

9187

AREVA

Germany

Voltage : 132 kV.


Capacity : 63 MVA.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

9188

BEST

Balikesir, Turkey

Voltage : No Limitation.
Capacity : 100 MVA.
Including (2) windings trafo. With
tertiary.

9190

Siemens Transformers Austria GmbH & Co Weiz, Austria


KG

Sunday, May 10, 2015

Voltage : No Limitation.
Capacity : No Limition.
Including (2) windings trafo. With
tertiary.
Including (3) windings trafo with
tertiary.

Page 81 of 100

9191

HITACHI

Kokubu, Japan

Voltage : No Limitation.
Capacity : No Limitation.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

9192

Hyundai Heavy Industries co., Ltd

Korea

Voltage : No Limitation.
Capacity : 63 MVA.
Only (2) windings trafo.

9267

Fortune Electric Company

TauYuan, Taiwan

Voltage : 132 kV
Capacity : 63 MVA.
Only (2) windings trafo.
- Kuan Yin II Plant.
For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

9553

SHIHLIN ELECTRIC

Hsin Chu, Taiwan

Voltage : No Limitation.
Capacity : 10 MVA.
Only (2) windings trafo.

9835

CG Power Systems Belgium NV.

Mechelen, Belgium Voltage : No Limitation


Capacity : 63 MVA.
Including (2) windings trafo. With
tertiary.
Including (3) windings trafo with
tertiary.

9838

CG Electric System Hungary zrt.

Tapioszele, Hungary Voltage : 132 kV.


Capacity : 63 MVA.
Only (2) windings trafo.

10344

Zaporozhtransformator PJSC (ZTR)

Zaporozhye,
Ukraine

Voltage : No Limitation.
Capacity : No Limitation.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

10872

SIEMENS

Nurenburg,
Germany

Voltage : No Limitation.
Capacity : No Limitation.
Including (2) windings trafo. with
tertiary.
Including (3) windings trafo with
tertiary.

10873

SIEMENS

Dresden, Germany

Voltage : 132 kV.


Capacity : 63 MVA.
Only (2) windings trafo.

Sunday, May 10, 2015

Page 82 of 100

Sub Category

Transformer

No

Contractor Name

Location

Limitations/Conditions

11128

Saudi Power Transformers Company


(SPTC)

Dammam,Saudi
Arabia

Voltage: 132 KV.


Capacity: 100 MVA.
Only (2) windings trafo.
SPTC shall demonstrate factory
capability to test the transformer
according to SEC specification.

Sub Category

UNIT AUXILIARY TRANSFORMER (UAT)

No

Contractor Name

Location

Limitations/Conditions

8713

SHIHLIN ELECTRIC

Hsin Chu, Taiwan

Voltage : No Limitation.
Capacity : 5 MVA
Only (2) windings trafo.

8778

SIEMENS

Nurenburg,
Germany

Voltage : No Limitation.
Capacity : No Limitation.
Including (2/3) windings trafo.

8779

HITACHI

Kokubu, Japan

Voltage : No Limitation.
Capacity : No Limitation.
Including (2/3) windings trafo.

8780

ABB

ludvika, Sweden

Voltage : No Limitation.
Capacity : No Limitation.
Including (2/3) windings trafo.

8781

AREVA

Germany

Voltage : No Limitation.
Capacity : 20 MVA.
Only (2) windings trafo.

8783

ABB

Karte, Turkey

Voltage : No Limitation.
Capacity : 40 MVA.
Including (2/3) windings trafo.

8784

Siemens Transformers Austria GmbH & Co Weiz, Austria


KG

Voltage : No Limitation
Capacity : 20 MVA.
Including (2/3) windings trafo.

8785

HYUNDAI HEAVY INDUSTRIES CO., LTD.

Korea

Voltage : No Limitation.
Capacity : 100 MVA.
Including (2/3) windings trafo.

8786

ABB

Kln, Germany

Voltage : No Limitation.
Capacity : 20 MVA.
Including (2/3) windings trafo.

8787

EMCO Ltd.

Thane, India

Voltage : No Limitation.
Capacity : 10 MVA.
Only (2) windings trafo.

Sunday, May 10, 2015

Page 83 of 100

8791

Toshiba Corporation

Kawasaki, Japan

Voltage : No Limitation.
Capacity : 10 MVA.
Only (2) windings trafo.

8792

SMIT TRANSFORMER B.V.

Netherlands

Voltage : No Limitation.
Capacity : No Limitation.
Including (2/3) windings trafo.

9072

ABB

Cordoba, Spain

Voltage : No Limitation.
Capacity : 20 MVA.
Including (2/3) windings trafo.

9189

BEST

Balikesir, Turkey

Voltage : No Limitation.
Capacity : 60 MVA.
Including (2/3) windings trafo.

9196

TBEA

Xinjiang, China

Voltage : No Limitation.
Capacity : 10 MVA.
Only (2) windings trafo.

9552

Fortune Electric Company

TauYuan, Taiwan

Voltage : No Limitation
Capacity : 10 MVA
Only (2) windings trafo.
- Kuan Yin II Plant.
For the first order of each rating and
type,the design of transformer to be
vetted and approved by
Hitachi.Compliance of this shall be
submitted to SEC for approval & record.

9836

CG Power Systems Belgium NV.

Mechelen, Belgium Voltage : No Limitation.


Capacity : 63 MVA.
Only (2) windings trafo.

9839

CG Electric System Hungary zrt.

Tapioszele, Hungary Voltage : No Limitation.


Capacity : 20 MVA.
Only (2) windings trafo.

10343

Zaporozhtransformator PJSC (ZTR)

Zaporozhye,
Ukraine

Voltage : No Limitation.
Capacity : 120 MVA.
Including (2/3) windings trafo.

10874

SIEMENS

Dresden, Germany

Voltage : No Limitation.
Capacity : 10 MVA.
Only (2) windings trafo.

11455

Fuji Electric Co., Ltd.

Chiba, Japan

Voltage : No Limitation.
Capacity : 80 MVA.
Including (2/3) windings trafo.

Main Category

Sunday, May 10, 2015

TURBINE I+C SYSTEM

Page 84 of 100

Sub Category

TURBINE I+C SYSTEM

No

Contractor Name

Location

7523

ABB POWER AUTOMATION

Switzerland

7524

SIEMENS-AG

Germany

Main Category

Limitations/Conditions

Turbo generator

Sub Category

SYNCHRONOUS GENERATORS
Limitations/Conditions

No

Contractor Name

Location

6543

SIEMENS

Germany

6553

GENERAL ELECTRIC

PETERBOROUGH,
ON, CANADA

6745

BRUSH

United Kingdom

9152

ANSALDO ENERGIA S.p.A.

Italy

10226

Mitsubishi Electric (MELCO)

Kobe, Japan

10270

Siemens Energy, Inc. / Charlotte Turbine


Generator Service Center

Charlotte, USA

11053

NIDEC Ansaldo Sistemi Industriali S.P.A

Italy

Up to 12.6MW Only

11090

TMEIC (Toshiba-Mitsubishi Electric


Industrial Systems Corporation

Japan

2 Pole Synchronous Generator Up to 40


MVA only.

11513

BRUSH SEM s.r.o.

Czech Republic

1- TEWAC Generators:
From 100 MVA to 305 MVA.
2- Hydrogen-Cooled Generators:
From 200 MVA to 1300 MVA

11561

ANDRITZ HYDRO GmbH.,

Austria

1- TEWAC Generators:
A-Up to 350 MVA.
B-Five years warranty.
2- Hydrogen-Cooled Generators:
A-Up to 450 MVA.
B-The supplier of Stator Frame of the
first unit supplied to SEC must be
audited for welding process and
procedures along with pressure test.

Main Category

Sunday, May 10, 2015

Air Cooled Generators Up to 300MVA


for60HzModeles;
(WY18Z,WY21Z,WY23Z,WX18Z,and
WX21Z&WX23Z)

VALVES

Page 85 of 100

Sub Category

BOILER FEED/FEED/STOP/MAIN STEAM STOP VALVES

No

Contractor Name

Location

5106

EDWARDS

USA

5108

DRESSER (FLOWSERVE)

USA

10010

Key Valve Technologies (KVT )

Korea

10259

CCI

USA, Switzerland,
Sweden, Austria

Sub Category

Contractor Name

Location

5109

DRESSER (FLOWSERVE)

USA / Italy

5113

CROSBY

USA

10260

CCI

USA, Switzerland,
Sweden, Austria

Contractor Name

Location

5015

REXROTH

USA

Limitations/Conditions

CONTROL VALVES Valves (Butterfly , Gate , Globe , Check , Ball ) AND


PLUG; VALVE: CONTROL; INCLUDING ACTUATOR, POSITIONER & REGULATOR

No

Contractor Name

Location

6372

UTSUE

Japan

6374

SEVERN GLOCON LTD.

United Kingdom

6375

FISHER NIPPON CO. LTD.

Japan

6376

FISHER CONTROLS INCORPORATED

USA

6380

FISHER ROSEMOUNT HUNGARY LTD

SZEKESFEHERVAR,
HU

6384

FISHER ROSEMOUNT S.A.

France

6389

FLOWSERVE CORPORATION

United States

6401

NIIGATA MASONEILAN CO LTD

Japan

6403

DRESSER AL-RUSHAID VALVE &


INSTRUMENT/ ASHCROFT (MASONEILAN)

Saudi Arabia

6407

DRESSER PRODUCTS INDUSTRIES

France

Sunday, May 10, 2015

Limitations/Conditions

COMBINED MAIN STOP AND CONTROL VALVE/ACTUATOR

No

Sub Category

Size: up to and including 40"


Rating: up to and including 4500 Ibs
/PN640/10.000psi

BOILER SAFETY VALVES

No

Sub Category

Limitations/Conditions

Limitations/Conditions

Digital positioner to be supplied from


other approved vendors

Page 86 of 100

6410

DRESSER ITALIA SPA

Italy

6412

NIPPON FISHER CO. LTD.

Japan

6415

METSO AUTOMATION OY

HELSINKI, FI

6419

FLOWSERVE CORPORATION

United Kingdom

6421

MACHINEFABRIEK MOKVELD B.V.

Netherlands

7543

MASONELIAN (DRESSER)

USA

8426

S&S Valve

Korea

1. Gate Globe Check Valves Forged :


Models : ANSI (600 : 4500) Size up to 50
mm2. Gate Globe Check Valves
Casting: Models : ANSI (150:2500) Size
50 mm up to 900mm3. Control Valves
Models : ANSI 2500 , Size up to DN 50
Models : ANSI 1500 , Size DN
2- Ball ValvesModels : ANSI 600 , Size
300 mm
3- Cryogenic ValvesModels : ANSI 600
Only for Water & Fluid application

8434

GREEN CONTROL S.R.L.

Italy

1-Turbine bypass valves (both steam


and desuperheat.
2-Feedwater and condensate flow
control valves.
3-Boiler feed pump and condesate
pump minimum flow control valves.
4-Desuperheater spray water control
valves.

8459

Crane Valve Group / Krombach

Germany

1-Butterfly Valves:
*Only for Steam & Water
*Models: Double & Triple Eccentric
*Size : 6" - 136"
2- Ball Valves:
*No Limitation.
3- Y & Basket Strainer:
*No Limitation.

Sunday, May 10, 2015

Page 87 of 100

8906

Pentair Valve &control italia S.r.I- Vanessa


manufacturing Plant

Italy

-Butterfly Valve ,Size up to 12 inch ,class


150 only ,non - ferrous body , 04SAMM-035, 04-SAMMSS-048.
Concentric design, class 150 only all ends
with or without actuator.
-Butterfly Valve ,High performance type
, Size 2 Inch and up , Ansi CI 150
Valves And up supply AA API 609 . 04SAMMSS-035,Double eccentric design
.Soft seated with or without actuator
specification Api Std 609 Category B.
-Butterfly Valve , High performance
type. Triple eccentric design type API
609 category B, 04 SAMMSS 04-SAMSS048, Metal seated, Zero leakage
with or without actuator. Butterfly valve
metal seated , Zero leakage . Any
size and rating flanged or bet weld ends
API 609 category B.

9050

KSB Amri

France

Manafactured in France Only

9148

CEPHAS PIPLINE CORPORATION

Korea


Concentric, -Double & Triple and
quadruple offset design.

80 mm to
900 mm ANSI CLASS 600,

1000 mm
to 4000 mm with Double , Triple and
quadruple offset design, ANSI Class 300.

9158

ACE Valve Company Limited

Korea

-Butterfly Valve ;Size UPTO 12 Inch;


NonFER
-Butterfly Valve ;High performance ; 2
inch
-Butterfly Valve ;Size 2 inch up to 12 inch
-Butterfly Valve ;Size 14 ineh and up ;
east 0
-Chiek Valve,Wafer valve; Size up to 12
ineh ; Non-FER
-Chick Valve; Size 14 inch and up ,any
supply,cost or ductile
iron body ,Swing, Flanged, Lug or Wafer
end Conn,04-Samss-035,04-Samss-048

9331

PK valve

Korea

1-Gate valve Class 150-2500


2-Globe valve Class 150-1500
3-Swing/CH valve Class 300-2500

Sunday, May 10, 2015

Page 88 of 100

9398

Samshin Limited

Korea

1-Gate Globe Check valves Forged : ize


up to 50 mm and ANSIpressure class
600 to 4500
2-Gate Globe Check valves Casting :
Size 65 mm to 900mm and ANSI
pressure class 150 to 4500
3- For other sides up to 900 mm only.
Ansi pressure class 150-600

10100

Key Valve Technologies (KVT )

Korea

Size: up to and including 40"


Rating: up to and including 4500 Ibs
/PN640/10.000psi

10242

Nihon Koso Co

Japan

10261

CCI

USA, Switzerland,
Sweden, Austria

10293

M/S MTS VAVES & TECHNOLOGY


(Arrankudiaga, spin )

spain

Sunday, May 10, 2015

1- Gate valves (Option : flexible Wedge


& Parallel slide)(size : 1/2 - 60 )
2- Glople Bolted Bonnet Valves (Option
: "T" body & "Y"body type)(size : 1/2 60 )
3- check Bolted Bonnet Valves (Option
: Swing check & Piston check)(size : 1/2 60 )
4- Manufacturing Plug Lubricated
Valve(size : 1/2 - 24 )
5-Manufacturing Plug NON-Lubricated
Valve (size : 1/2 - 24 )
6- Manufacturing Butterfly Valve (
Construction: Tripple Offset ,Metal-toMetal)(size"2"-"30")
7- Manufacturing Check Dual Plate
Wafer Check Valve (Size ("1/2" - "60")
8- Manufacturing Globle Bellow Seal
Valve (Size "1/2" - "16 ")
9- Manufacturing Globle control Valve (
Size "1" - "16")

Page 89 of 100

10294

M/S LAZARO ITUARTE VALVES ( Ammurrio


, Spain)

Sunday, May 10, 2015

Spain

1- Gate valves (Option : flexible Wedge


& Parallel slide)(size : 1/2 - 60 )
2- Glople Bolted Bonnet Valves (Option
: "T" body & "Y"body type)(size : 1/2 60 )
3- check Bolted Bonnet Valves (Option
: Swing check & Piston check)(size : 1/2 60 )
4- Manufacturing Gate Pressure seal
Bonnet Valves (Option : flexble Wedge
& Parallei Slide .(size : "1/2" - "36" )
5-Manufacturing Gate Pressure seal
Bonnet Valves(Option : "T" body &
"Y"body type)(size : "1/2" - "36" )
6 - Manufacturing check Pressure Seal
Bonnet Valve ( Option : Swing check ,
Piston check & Titing Disc ) ( Size ( "1/2" "36")
7- Manufacturing Gate Through conute
Valve ( Option :Slab Gate & Expaning
Gate ) ( size ( "4" - "60")
8- Manufacturing check Valve (
Construction : Swing Check , Full Bore ) (
Size "2" - " 60" )
9- Manufacturing gate Valve (
Construction : Extended Bolted Bonnet ,
Cryogenic ) ( size "1/2"
10- Manufacturing globe Valve (
Construction : Extended Bolted Bonnet ,
cryogenic ) ( size : "1/2" - " 60 " )
11- Manufacturing check Valve (
Construction : Extended Bolted Bonnet ,
cryogenic ) ,(option : Swing check &
Piston check ) ( size : "1/2" - " 60 " )
12- Manufacturing Ball Valve (
Construction : Extended Bolted Bonnet ,
cryogenic , side Entry / Top Entry ,
Floating / Trunnion , soft
seats ) , ( options : full or reduced Bore
)( size "1/2"-"60")

Page 90 of 100

10295

M/S FLUVAL VALVE ( Amurrio,Spain )

Sunday, May 10, 2015

Spain

1- manufacturibg Ball Valve (


Construction : side Entry / Top Entry ,
floating / Trunnion , soft seat / Metal -toMetal Seats )( Option: full or reduced
Bore )( size "1/2" - "60" )
2- Manufacturing Gate Bolted Bonnet
Valve (Option : Flexible Wedge &
Parallel Slide )
3- Manufacturing Globe Bolted Bonnet
Valve (Option "T" body & "Y"body
type)(size "1/2" - "60")
4- Manufacturing check Bolted Bonnet
Valve (Option : Swing check & Piston
check )(size "1/2" - "60")

Page 91 of 100

10380

Fasani Manufacturing plant / Pentair


Valves & Controls Italia S.r.l.

Italy

-Valve Check; Size 2 thru 24 inch , ANSI


CL 150 and up supply ,steelbody,
swing,flanged or buttweld end conn,
metal seat , full opening, 04-SAMSS
035.04-SAMSS-048.Appendix D.
-Valve Check; Size 26 IN and up, supply,
swing, flanged or buttweld end
conn, metal seat. full opening
,04SAMSS-Q05, 04-5AMSS-004
appendix D
-Valve Check ; Size 1 inch and up, ANASI
CL,150 and up supply. steel
body, piston,flanged or buttwektend
conn, 04SAMSS035, 04-SAMSS-048.
-Valve Check : Size 2 thru 24 inch, ANSI
CL 150 and up supply, steetbody ,
swing,flanged or butlweld end conn,
04SAMSS005. 04-SAMSS035.
metal seated.
-Valve Check; Size 26 inch and up , ANSI
CL 150 and up supply, steel
1 Valves body , swing flanged or
buttweld end conn, 04SAMSS005,
04SAMSS
035.
-Valve Check ; Size 2 thru 24 inch . ANSI
CL 150 and up supply , steel body
,tilting disc, flanged or bullweld end
conn, 04SAMAA-035 . 04SAMSS
048.
-Valve Gate Wedge : size 1 thru 24 inch,
ANSI 150 and up supply , flanged
or buttweld end conn .steel body , 04SAMSSS-035, 04SAMSS-048.
-Valve Gate Wedge ; size 26 inch and up,
flanged or buttweld end conn
,steel body , 04SAMSS..Q35 04 .w ith or
without actuator.
-Valve Gate Wedge ; flanged or butlweld
end coon ,steel body , O4SAMSS00 1 , 04-SAMSS04 ,soft seated ,with or
without actuator.
-Valve Gate Wedge : size 1 inch up NPS
,ANSI 150and up supply, flanged

Sunday, May 10, 2015

Page 92 of 100

or buttweld end conn ,steel body , 04SAMSS002, 04-SAMSS035 , with or


without actuato.
10384

KPC Corporation

10795

Crane Energy Flow Solutions Pacific Valves USA

1- Gate Valves:
Class: 150-2500
Sizes up to 38"
2- Globe Valve:
Class: 150-2500
Sizes up to 24"
3- Check Valves
Class: 150-2500
Sizes up to 24"

11257

GE Nuovo Pignone SPA

Only for :
Size Range - 1" to 44" std. - Rating Class 150# to 2,500#; API, 10,000; API
15.000. - Cast and Forged
Body - Globe and Angle Control Valves,

Sub Category

Korea

Italy

CONTROL VALVES: AXIAL FLOW

No

Contractor Name

Location

6422

MACHINEFABRIEK MOKVELD B.V.

Netherlands

6423

DANIEL VALVE COMPANY

USA

6424

DRESSER AL-RUSHAID

Saudi Arabia

Sub Category

Limitations/Conditions

CONTROL VALVES; AUTOMATIC RECIRCULATION

No

Contractor Name

Location

6427

SCHROEDAHL ARAPP GMBH & CO. KG

REICHSHOFMITTELAGGER, DE

6428

H. SCHROEDER & CO. GMBH & CO. KG

GUMMERSBACHELBACH, DE

6429

TYCO VALVES & CONTROL-YARWAY

USA

10263

CCI

USA, Switzerland,
Sweden, Austria

Sunday, May 10, 2015

1) Size 2 through 48 inch,ANSI CL150


and up supply ,flange or buttweld end
conn ,steel body ,style split body,
thrunnion supported support, metal
seated seat,04-SAMSS-051 appendix
A,04-SAM,with or without Actuator.
2) SPLIT BODY, 2 THRU 48 INCH, ANY
RATING.
3) TOP ENTRY, 2 IN & UP

Limitations/Conditions

Page 93 of 100

Sub Category

CONTROL VALVES; DESUPERHEATING

No

Contractor Name

Location

6398

MASONEILAN DIVISION

USA

Sub Category

HP/LP BYPASS VALVES STATION

No

Contractor Name

Location

5126

BOPP & REUTHER

Germany

5127

CCI

USA, Switzerland,
Sweden, Austria

5129

TYCO/SEMPELL

Germany

5130

VANATOME

France

10146

Nihon Koso Co.

Japan

10248

Welland & Tuxhorn AG

Germany

Sub Category

Contractor Name

Location

10249

S.N.R.I France

France

Limitations/Conditions

MAIN AND SECONDARY CW VALVES

No

Contractor Name

Location

5115

DOUGLAS CHERO SPA

Italy

5116

KSB AMRI

Germany

5117

SAPAG INDUSTRIAL VALVES

France

5118

ORTON

Italy

Sub Category

Limitations/Conditions

large bore valves

No

Sub Category

Limitations/Conditions

Limitations/Conditions

SAFETY RELIEF VALVES; FLANGED, CONVENTIONAL AND BALANCED BELLOWS


Limitations/Conditions

No

Contractor Name

Location

6335

DRESSER AL-RUSHAID VALVE &


INSTRUMENT/ ASHCROFT

Saudi Arabia

6338

DRESSER INDUSTRIAL VALVE

USA

6340

ANDERSON GREENWOOD CROSBY

United Kingdom

6344

FARRIS ENGINEERING

USA

9399

Samshin Limited

Korea

up to 4500 classes water aplication only.

9403

S&S Valve

Korea

Safety Relief ValvesModels : ANSI


(150 : 4500) Only for Water & Fluid
application

Sunday, May 10, 2015

Page 94 of 100

10752

LESER GmbH & Co. KG

Sub Category

Germany

SAFETY RELIEF VALVES; PILOT OPERATED; FOR PROCESSING PLANTS

No

Contractor Name

Location

6336

DRESSER AL-RUSHAID VALVE &


INSTRUMENT/ ASHCROFT

Saudi Arabia

6339

DRESSER INDUSTRIAL VALVE

USA

6341

ANDERSON GREENWOOD CROSBY

USA

6345

FARRIS ENGINEERING

Canada

6356

TYCO SAFETY SYSTEMS UK

United Kingdom

Sub Category

Contractor Name

Location

6342

ANDERSON GREENWOOD CROSBY

USA

6357

TYCO WHESSOE

United Kingdom

6358

TYCO VAREC

USA

Contractor Name

Location

7970

EMERSON-FISHER CONTROLS CO.

USA

7971

METSO AUTOMATION OY

Helsinki, FI

Sub Category

Limitations/Conditions

SMART ZV CONTROLLER; SMART VALVE CONTROLLER AND SOFTWARE THAT


PROVIDE THE LOCAL CONTROL OF SMART ZV WITH PREDEFINED PARTIAL

No

Main Category

Limitations/Conditions

SAFETY RELIEF VALVES; PILOT OPERATED; FOR STORAGE TANKS AND


SPHEROIDS

No

Sub Category

Maximum size 16", highest flange rating


2500.

Limitations/Conditions

Water Treatment

CHLORINATION SYSTEM
Limitations/Conditions

No

Contractor Name

Location

4961

DE NORA

Italy

4962

Johnson March Systems, Inc.

USA

8307

Daiki Ataka Engineering Co., Ltd

Japan

Model 10WL,Model 15WL,Model


35BL,Model 25BL

8650

Cumberland Electrochemical Ltd

United Kingdom

For the following systems:1-Panclor


land based electrochlorination plant2Elchlor offshore & shipboard
electrochlorination plant

10123

Mitsubishi Heavy Industries Environmental Japan


&Chemical Engineering Co., Ltd. (MHIEC)

Sunday, May 10, 2015

Only for Bi-Polar technique

Page 95 of 100

Sub Category

DEMINIRALIZATION & POTABILIZATION SYSTEM

No

Contractor Name

Location

5159

TERMOMECCANICA

Italy

5186

TERMOKIMIK

Italy

5188

ONDEO

USA

5190

OVIVO (CHRIST)

USA / United
Kingdom

5193

GLEGG

USA

Sub Category

DEMINIRALIZATION WATER TREATMENT SYSTEM & POTABILIZATION SYSTEM

No

Contractor Name

Location

5158

TERMOMECCANICA

Italy

5185

TERMOKIMIK

Italy

5187

ONDEO

USA

5189

OVIVO (CHRIST)

USA / United
Kingdom

5192

GLEGG

USA

5194

US FILTER

Country of origin is
subject to SEC
approval

5196

GE WATER TECHNOLOGIES (GLEGG)

Hungary / Canada

5198

WATER AND POWER TECHNOLOGIES

Salt Lake City, USA

5200

GE Water & Process Technologies GLEGG


(ECOLOCHEM)

Hungary / Canada

5202

Veolia

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Limitations/Conditions

Page 96 of 100

9262

Water & Environment Technologies Co.


Ltd (WETICO)

Saudi Arabia

Up to 80 m/Hr
Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:
1-Pumps
a-KSB pumps ( Germany or France)
b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)
2- Pressure vessels for the Reverse
osmosis membranes from:
a-Bekart ( Spain )
b-Codeline ( USA)
3- Vessels: Filter Vessels, Cation vessels,
anion vessels and mixed bid Vessels by
a-M/S. Wetico. ( KSA )
b-M/S. Ferrofab ( UAE)
4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

9377

A.E.S ARABIA LTD. (AES)

Saudi Arabia

Capacity up to : 500m3/hr

9825

Hyorim Industries Inc.

Korea

- Demin water Plants capacity up to 205


m/h
-Potable Water Process Capacity up to
15 m/d
-Condensate Polishing Plants Capacity
up to 680 m/h

Limitations/Conditions

Sub Category

DESALINATION PLANT

No

Contractor Name

Location

6349

Mitsubishi Hitachi Power Systems (MHPS)

Japan

6350

DOOSAN

Korea

Sunday, May 10, 2015

Page 97 of 100

9264

Water & Environment Technologies Co.


Ltd (WETICO)

Saudi Arabia

Up to 350 m/Hr
Condtions:
The main equipment for the plant must
be supplied from one of the following
suppliers:
1-Pumps
a-KSB pumps ( Germany or France)
b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)
2- Pressure vessels for the Reverse
osmosis membranes from:
a-Bekart ( Spain )
b-Codeline ( USA)
3- Vessels: Filter Vessels, Cation vessels,
anion vessels and mixed bid Vessels by
a-M/S. Wetico. ( KSA )
b-M/S. Ferrofab ( UAE)
4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

9726

ASTER S.p.A

Italy

1: MSF Desalination Plants: Capacity up


to 5000 m3/day.
2: MED with Thermal Vapour
Compression Desalination Plants:
Capacity up to 100 m3/hr

10106

A.E.S ARABIA LTD. (AES)

Saudi Arabia

Capacity up to :4200 m3/hr

10431

Veolia

Saudi Arabia

Reverse Osmosis system (RO)

Sub Category

SEWAGE TREATMENT PLANT

No

Contractor Name

Location

5160

TERMOMECCANICA

Italy

5211

TECH UNIVERSAL SANDS

Saudi Arabia

Sunday, May 10, 2015

Limitations/Conditions

Page 98 of 100

9263

Water & Environment Technologies Co.


Ltd (WETICO)

Saudi Arabia

Up to 500 m/Hr
Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:
1-Pumps
a-KSB pumps ( Germany or France)
b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)
2- Pressure vessels for the Reverse
osmosis membranes from:
a-Bekart ( Spain )
b-Codeline ( USA)
3- Vessels: Filter Vessels, Cation vessels,
anion vessels and mixed bid Vessels by
a-M/S. Wetico. ( KSA )
b-M/S. Ferrofab ( UAE)
4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

9826

Hyorim Industries Inc.

Korea

Sewage Tratment Systems up to 4000


m/d

10107

A.E.S ARABIA LTD. (AES)

Saudi Arabia

Capacity up to :2500 m3/hr

Sub Category

Waste Water System

No

Contractor Name

Location

Limitations/Conditions

8739

Hyorim Industries Inc.

Korea

- Oily waste water systems capacity up


to: 150 m/h
- Neutralization systems up to : 150
m/h
- Chemical waste water systems up to :
150 m/h

11302

Veolia

Saudi Arabia

Sunday, May 10, 2015

Page 99 of 100

Sub Category

WATER TREATMENT SYSTEMS (DEMIN)

No

Contractor Name

Location

5195

US FILTER

USA / UAE

5199

WATER AND POWER TECHNOLOGIES

Salt Lake City, USA

5201

GE Water & Process Technologies GLEGG


(ECOLOCHEM)

Hungary / Canada

5203

Veolia

Saudi Arabia

5209

GRAVER WATER CO.

USA

5210

HUNGERFORD & TERRY, INC.

Country of origin is
subject to SEC
approval

9261

Water & Environment Technologies Co.


Ltd (WETICO)

Saudi Arabia

Limitations/Conditions

Up to 500 m/Hr
Conditions:
The main equipment for the plant must
be supplied from one of the following
suppliers:
1-Pumps
a-KSB pumps ( Germany or France)
b-Grundfos ( Denmark )
c-Flowserve ( Holland or Finland)
d-Flygt ( Sweden )
e-Tsurumi (Japan)
2- Pressure vessels for the Reverse
osmosis membranes from:
a-Bekart ( Spain )
b-Codeline ( USA)
3- Vessels: Filter Vessels, Cation vessels,
anion vessels and mixed bid Vessels by
a-M/S. Wetico. ( KSA )
b-M/S. Ferrofab ( UAE)
4- RO membranes from:
a- Filmtec ( USA )
b-Toray (Japan )
c-Hydranautics ( USA
5- Resin for the Cation, Anion and Mixed
bed from:
a-Dow Chemicals ( USA)

Sunday, May 10, 2015

Page 100 of 100

SAUDI ELECTRICITY COMPANY


Engineering and Generation Projects Sector

Approved Subcontractor List

Sunday, May 10, 2015

Page 1 of 25

General Instructions

1. This document (Approved Subcontractor list) ASL has been developed by Generation Project
Engineering Sector- Engineering Department.
2. All contracts shall be made by the EPC contractor according to the approved list.
3. The Contactor shall ensure that all his selected Subcontractors should have valid ISO 9001 QC
Certificate for particular HQ/Branch while commencing work.
4. The contracting outside the approved list shall not be allowed. However, in special cases such as
for example (Approved subcontractor decline to quote, requested service not listed in the list ) the
EPC Contractor shall send PQ request to the concerned Execution Dept, describing the
circumstances and enlisting the reasons for not utilizing the SEC approved list. The concerned
Execution Dept. shall thoroughly scrutinize the validity of the contractor request. In case of valid
reasons and considering impact on the progress, fill the PQ request and send it to Generation
Technical Qualification Division ENGTQDV@se.com.sa
5. Approval / disapproval by COMPANY of subcontractor prequalification documents shall not relieve
the CONTRACTOR from his obligations under the Contract.
6. The Subcontractor listings shall be interpreted in the following manner:
6.1 Subcontractor listed with the word "None" as a "Limitation". All services from the subcontractor in
the given category are acceptable.
6.2 Subcontractor listed with a "Limitation": Only the services that meets the "Limitation" is
acceptable.
6.3 S
ubcontractor is listed with a specific "Location: Only that branch in the specific location or
area(s) are acceptable.
7. Company reserves the right to revise the Approved Subcontractor's List (ASL) at any time prior to
submission of the Bidders Commercial Proposal, however, this is only applicable to foreign
companies. In terms of local companies, and regarding of ITB [General Instruction for Preferred
Procurement], this restriction does not apply and as such the Company reserves the right to revise
the ASL at any time during the project life cycle (i.e. Bidding stage, contract award, project execution,
commissioning and final close out), in order to cater for local procurement. Moreover, the Companys
Qualification Division is the only body authorized to revise the ASL as per Companys internal
policies and procedures.

Sunday, May 10, 2015

Page 2 of 25

Qualified For

CHIMNEY STACK & LINERS

Rec No Contractor Name

Location

Limitations

10961 Refractories & Chimneys Construction


Co. Ltd. (RCC)

Saudi Arabia

Engineering and Design shall be from


approved OEM.

10288 Nem Power System

Germany

8706 TechTowers for Power &


Telecom,Aarding Thermal Acoustics

Netherlands

8418 HADEK (Protective Pennguard Block)

Netherlands

8083 MARIANI BATTISTA ARABIA

Saudi Arabia

9171 Chimneys and Refractories International


(CRI) - BEROA

Italy

8150 SAUDI METAL COATING CO.

Saudi Arabia

8413 Balanced Engineering Construction BEC

Singapore

10463 BEMCO Steel Industries (BSI)

construction of Concret chimneys.


Note: "all supplied materials shall be
subject to SEC approval.

Saudi Arabia

Qualified For

Civil Works including pilling, concrete works, roads, cooling water pipes (erection),
various service & infrastructure works
Rec No Contractor Name
Location
Limitations

Sunday, May 10, 2015

Page 3 of 25

10646 AL-BARAKA CONSTRUCTION CO. LTD Saudi Arabia


BCC

Only for:
1. Asphalt Work
2. Site Preparation.

10559 HUTA MARINE WORKS LTD.

Saudi Arabia

10041 Mohammed Ali Al swailem Group


(MASCO)

Saudi Arabia

Civil Work Except Power Block.

10162 Hassan Allam Saudi Construction

Saudi Arabia

Civil Works Excluding Power Block.

10541 SAUDI AL TERAIS TRADING


INDUSTRIAL CONTRACTING CO. LTD

Saudi Arabia

10542 Al Saad Contracting & Trading Co

Saudi Arabia

10554 A. S. Husseini & Partner Contracting Co.


Ltd.

Saudi Arabia

10526 National Contracting Co. (NCC)

Saudi Arabia

10519 Arabian BEMCO Ind & Power Projects

Saudi Arabia

10523 MAG

Saudi Arabia

Sunday, May 10, 2015

- Ground supported foundation systems.


- Miscellaneous reinforced concrete
structures.
- Large single story masonry buildings.
- Pre-engineered steel erection for

Page 4 of 25

10552 Yuksel Insaat Saudia Co.Ltd

Saudi Arabia

Construction management and


supervision shall be done by Yuksel
insaat A.S.,Turkey

10975 ETE Group- Eastern Trading &


Construction Group

Saudi Arabia

Civil Works Excluding Power Block.

10875 SAPAC - SAUDI PAN Kingdom for


Trading , Ind & Contracting (C.J.S.Co)

Saudi Arabia

NONE

10509 Amem Engineering Int. L.L.C

Saudi Arabia

11102 Al-Latifia Trading & Contracting Co.,

Saudi Arabia

1- Site Preparation work.


2- Non industrial civil buildings
construction.

10553 Al- Shibel Est. For Trading & Contracting

Saudi Arabia

- Ground supported foundation systems.


- Miscellaneous reinforced concrete
structures.
- Single story masonry buildings.
- Asphalt roadways.

11009 The Egyption Petrolium Projects Co.


Petrojet

Saudi Arabia

For:
a) Industrial Building.
b) Tanks Foundation.
c) Steel Structure

9170 Kettaneh Construction Saudi Arabia Ltd.


(KCS)

Saudi Arabia

9805 Sungchang Abdullah Al-Shaikh


Contracting Co.Ltd.

Saudi Arabia

8240 Rabya Trading & Agriculture Co.

Saudi Arabia

Sunday, May 10, 2015

-Civil Works: Steel Structure Erection

Page 5 of 25

8217 ASSAD SAID CORPORATION

Saudi Arabia

8137 Trading & Development Partnership

Saudi Arabia

11243 Contracting & Construction Enterprises


Co. Ltd ( CCE )

175 Sinomach

Saudi Arabia

Turbine and Boiler foundations.


Engineering & Design to be conducted by
EPC / OEM.

China

11115 International Building System Co For


cntracting (IBS)

Saudi Arabia

Only For :
1-building construction (Except Power
Block)
2- Painting Works

11119 Modern Arab Construction Co.Ltd (MAC)

Saudi Arabia

Engineering, Design and Supervision


shall be done by EPC Contractor.

11080 AL Rushaid Construction Co., Ltd. (ARCC) Saudi Arabia

Civil, Mechanical and Electrical Work

10849 Nesma & Partners

Saudi Arabia

10848 Ammico

Saudi Arabia

site Preparation
Piling Works

Saudi Arabia

Excluding Power Block.

9776 Al-Ayuni Investment & Contracting


Company

Sunday, May 10, 2015

Page 6 of 25

10560 Saudi Archirodon Ltd

8060 SAUDI CONDRECO LTD

Saudi Arabia

Saudi Arabia

10536 Azzam Trading & Contracting Co. Ltd.

Saudi Arabia

10537 SAUDI CYPRIN CONST. CO. LTD.

Saudi Arabia

10538 United Constructors Contracting


Company (UCCL)

Saudi Arabia

10551 Sinsina Corner Co.

Saudi Arabia

Civil Work Limited to


administration,pumping,treatment plant
rooms only.

Saudi Arabia

Only for:
Site preparation work.
Non industrial Building

9723 Civil Electro-Mechanical Construction


company (CEMCCO)

Qualified For

Construction & Erection of simple cycle, combined cycle & thermal Power Plant

Rec No Contractor Name


8720 Harbin Power Engineering Co. Ltd (HPE)

243 SEPCO 3

8357 Shandong Electric Power Construction


no.2 SEPCO2

Sunday, May 10, 2015

Location

Limitations

China

China

China

Page 7 of 25

8317 China National Machinery & Equipment


Import & Export Corporation (CMEC)

Qualified For

China

CONSTRUCTION OF BUILDINGS

Rec No Contractor Name

Location

11443 Nesma & Partners

Saudi Arabia

11450 National Contracting Co. (NCC)

Saudi Arabia

10004 Yuksel Insaat Saudia Co.Ltd

Saudi Arabia

8216 Al Saad Contracting & Trading Co

Limitations

Construction management and


supervision shall be done by Yuksel
insaat A.S.,Turkey

Saudi Arabia

10206 Al- Shibel Est. For Trading & Contracting

Saudi Arabia

8215 SAUDI AL TERAIS TRADING


INDUSTRIAL CONTRACTING CO. LTD

Saudi Arabia

10207 A. S. Husseini & Partner Contracting Co.


Ltd.

Saudi Arabia

- Ground supported foundation systems.


- Miscellaneous reinforced concrete
structures.
- Large single story masonry buildings.
- Pre-engineered steel erection for

11451 SAPAC - SAUDI PAN Kingdom for


Trading , Ind & Contracting (C.J.S.Co)

Saudi Arabia

NONE

11449 Mohammed Ali Al swailem Group


(MASCO)

Saudi Arabia

Civil Work Except Power Block.

Sunday, May 10, 2015

- Ground supported foundation systems.


- Miscellaneous reinforced concrete
structures.
- Single story masonry buildings.
- Asphalt roadways.

Page 8 of 25

11448 International Building System Co For


cntracting (IBS)

Saudi Arabia

11447 HUTA MARINE WORKS LTD.

Saudi Arabia

11444 ASSAD SAID CORPORATION

Saudi Arabia

11442 Kettaneh Construction Saudi Arabia Ltd.


(KCS)

Saudi Arabia

11453 Al-Fanar Bena

Saudi Arabia

10271 Al-Mashrik LLC

Saudi Arabia

11446 Contracting & Construction Enterprises


Co. Ltd ( CCE )

Saudi Arabia

Turbine and Boiler foundations.


Engineering & Design to be conducted by
EPC / OEM.

11441 Al-Ayuni Investment & Contracting


Company

Saudi Arabia

Excluding Power Block.

11452 Saudi Archirodon Ltd

Saudi Arabia

8253 Al-Saad General Contracting.

Sunday, May 10, 2015

Only For :
1-building construction (Except Power
Block)
2- Painting Works

Saudi Arabia

Page 9 of 25

8064 Azzam Trading & Contracting Co. Ltd.

Saudi Arabia

8065 SAUDI CYPRIN CONST. CO. LTD.

Saudi Arabia

8066 United Constructors Contracting


Company (UCCL)

Saudi Arabia

9846 Sinsina Corner Co.

Saudi Arabia

Civil Work Limited to


administration,pumping,treatment plant
rooms only.

Saudi Arabia

Only for:
Site preparation work.
Non industrial Building

Location

Limitations

Saudi Arabia

Excluding Power block

9235 Sendan International Co.

Saudi Arabia

1- Subcotractor for Electrical wok:


Excluding Power
Work.
2-Subcontrcator For I&C Work:
Only for installation of I&C Materials and

9234 Asyad International Co.

Saudi Arabia

8356 STX Heavy Industrial Co. Ltd.

Korea

9233 Sejong Saudi Arabia LLC.

Korea

11445 Civil Electro-Mechanical Construction


company (CEMCCO)

Qualified For

Electrical and I&C Works

Rec No Contractor Name


11221 Nesma & Partners

Sunday, May 10, 2015

Page 10 of 25

10531 Kettaneh Construction Saudi Arabia Ltd.


(KCS)

Saudi Arabia

8111 GAMA

Saudi Arabia

9236 Woosun Electric Co.

Saudi Arabia

11116 International Building System Co For


contracting (IBS)

9238 National Contracting Co. (NCC)

11524 The Egyption Petrolium Projects Co.


Petrojet

8110 Carlo Gavazzi Arabia

Erection and installation of cable trays,


ladders, conduits, cable laying and
accessories, for medium voltage system.

Saudi Arabia

Saudi Arabia

Saudi Arabia

Cable Pulling.

Saudi Arabia

10529 SAUDI CONDRECO LTD

Saudi Arabia

10493 Hutni Montaze Ostrava

Czech Republic

10492 EnkaTeknik General Contracting

Turkey

Sunday, May 10, 2015

1-For HVAC mechanical & electrical


works.
2-Underground & above ground piping
erection including RTR pipes for
Drainage, Sewerage etc.

Page 11 of 25

10495 Samsung Corp

8112 MAG

Korea

Saudi Arabia

10496 CTCI Corporation

Taiwan

- Construacton & Erection for combined


cycle & steam power plant.BO..P only.
- General Mechanical,Electrical & civil
work.
- Construction & Erection of FGD system

10533 Power System Projects Co. (PSP)


(EL SEWEDY Turnkey Subsidiary)

Egypt

General Mechanical and electrical works


for BOP only.

10494 Energomontaz Poludnie SA

Chemar, Kielce

10502 Hyundai Heavy Eng'g & Construction

Korea

10500 Lahoud Eng'g Co. Ltd.

Lebanon

10505 GAMA

TURKEY

10489 Amem Engineering Int. L.L.C

Saudi Arabia

10499 Arabian BEMCO Ind & Power Projects

Saudi Arabia

Sunday, May 10, 2015

Page 12 of 25

10498 Hanjung (Korea Heavy Ind)

Korea

10497 Daewoo

Korea

10491 BILFAL Heavy Industries Ltd

Saudi Arabia

10490 EEI Corporation of the Philippines

Philippines

10508 JEONGSHIN E&C CO., LTD

Korea

10534 Sinsina Corner Co.

Saudi Arabia

1-Pipe erection and installation limited to


carbon steel only.
2-Cable Pulling and Termination.

10369 Daesun Electric Communication Co LTD

Saudi Arabia

General Electrical and I&C Works in the


BOP area only

Location

Limitations

Qualified For

FGD Installation work

Rec No Contractor Name


10233 STX Heavy Industrial Co. Ltd.

Korea

10652 CTCI Corporation

Taiwan

Qualified For

Fuel/Oil Storage Tanks/Water Storage Tanks, etc*

Rec No Contractor Name

Sunday, May 10, 2015

Location

Limitations

Page 13 of 25

9951 Bakri International Energy

Saudi Arabia

8194 Arabian CBI Ltd.

Saudi Arabia

8195 SAUDI METAL COATING CO. Ltd.

Saudi Arabia

8196 Al Zamil Heavy Industries

Saudi Arabia

8197 ARABIAN TANK & VESSEL

Saudi Arabia

9950 HIDADA LTD.

Saudi Arabia

Engineering,Procurement and
construction for fuel tanks.

Location

Limitations

Qualified For

.Fixed roof Fuel Oil storage tanks.


.Maximum capacity 20.000 m3

Marine work

Rec No Contractor Name


9967 JEONGSHIN E&C CO., LTD

Korea

9978 STFA Construction Group

Istanbul, Turkey

9979 HUTA MARINE WORKS LTD.

Saudi Arabia

10456 JAN DE NUL NUL N.V.

Sunday, May 10, 2015

Belgium

-Marin Works
- Dredging & Reclamation

Page 14 of 25

10574 Alsaad General Contracting Co

Saudi Arabia

Supervision By Epc Contractor

10067 Vision Development Co

Bahrain

Only construction works for marine. The


Engineering and Procurement are
excluded

10002 Saudi Archirodon Ltd

Saudi Arabia

Qualified For

Mechanical Works

Rec No Contractor Name

Location

8264 Hutni Montaze Ostrava

Czech Republic

9249 Kettaneh Construction Saudi Arabia Ltd.


(KCS)

Saudi Arabia

8246 Al-Ramadi Est.

Saudi Arabia

8200 SAUDI CONDRECO LTD

Saudi Arabia

8267 CTCI Corporation

Taiwan

8255 Arabian BEMCO Ind & Power Projects

Saudi Arabia

8265 Energomontaz Poludnie SA

Chemar, Kielce

Sunday, May 10, 2015

Limitations

1-For HVAC mechanical & electrical


works.
2-Underground & above ground piping
erection including RTR pipes for
Drainage, Sewerage etc.

- Installation & Erection work for combined


cycle & steam power plant. BO.P only.

Page 15 of 25

8278 GAMA

11018 TRUBA ARABIA LTD

TURKEY

Saudi Arabia

8263 EnkaTeknik General Contracting

Turkey

8259 Jurong Engineering

Singapore

8260 Amem Engineering Int. L.L.C

Saudi Arabia

8261 EEI Corporation of the Philippines

Philippines

8262 BILFAL Heavy Industries Ltd

Saudi Arabia

8266 Samsung Corp

Korea

8272 MAG

Saudi Arabia

9232 Oksan E & C

Korea

Sunday, May 10, 2015

Mechanical Work for :


-Installation of BOP.
- Installation of HRSG .
-Installation of Gas & Steam Turbine
Generator

-Erection of Drum,Filter,Screen,Crane.Installation of Pumps

Page 16 of 25

9229 Sungdo Engineering & Construction


Co.,Ltd.

Korea

9228 Sungchang Abdullah Al-Shaikh


Contracting Co.Ltd.

Korea

- Mechanical work:
>General Mechanical Works.
> Piping (Installation,testing)

11222 Nesma & Partners

Saudi Arabia

Excluding Power block

10341 ARESCO

Egypt

all workers and welder must have vaild


certificates as per SEC requirments

11523 The Egyption Petrolium Projects Co.


Petrojet

Saudi Arabia

For:
a) Piping.
b) Tanks.

8257 Lahoud Eng'g Co. Ltd.

Lebanon

8269 Hanjung (Korea Heavy Ind)

Korea

8423 Halla Energy & Environment

Korea

Mechanical Work:
- BOP mechanical works (Erection of
Drum, Filter and Screen)
- General Mechanical Works

10362 Power System Projects Co. (PSP)


(EL SEWEDY Turnkey Subsidiary)

Egypt

General Mechanical and electrical works


for BOP only.

10234 Gulf Consolidated Contractors Co

Saudi Arabia

For piping works within power plant.

Sunday, May 10, 2015

Page 17 of 25

10573 International Building System Co For


cntracting (IBS)

Saudi Arabia

10594 STX Heavy Industrial Co. Ltd.

Korea

9237 National Contracting Co. (NCC)

10007 JEONGSHIN E&C CO., LTD

Saudi Arabia

Korea

8311 Global Sources for General


Contracting(Nidal Group)

Saudi Arabia

8268 Daewoo

Korea

10382 Sinsina Corner Co.

8270 Hyundai Heavy Eng'g & Construction

Qualified For

Saudi Arabia

Piping erction works as per ASME


standard.

1-Pipe erection and installation limited to


carbon steel only.
2-Cable Pulling and Termination.

Korea

NDT (NON-DESTRUCTIVE TESTING)

Rec No Contractor Name

Location

10888 INDUSTRIAL SUPPORT SERVICES


COMPANY

Saudi Arabia

10969 Technology Precision and Quality Saudi


Cosnt (Qtech)

Saudi Arabia

Sunday, May 10, 2015

Limitations

Page 18 of 25

8298 Cooperheat Saudi Arabia

Saudi Arabia

8299 AL-HOTY

Saudi Arabia

11191 Gulf Engineering House

Saudi Arabia

11189 Zeppelin System Gulif Co.LTD

Saudi Arabia

11274 Axis Inspection Ltd.

Saudi Arabia

No Limitation

11404 Durrat AlJubail Contarcting (DJC)

Saudi Arabia

None

11289 KNDT ARABIA Co. Ltd.

Saudi Arabia

No Limitation

9946 Rawabi Insdustrial Support Services

Qualified For

Saudi Arabia

STEEL ERECTION WORK

Rec No Contractor Name

Location

Limitations

10718 Albawardi Steel Industries

Saudi Arabia

for Pipe racks and pipe s;eepers, Process


equipment service platforms,Production
platform structure,Conveyor
structures,Structural steel buildings,Stair
stringers,Caged ladders Truss

10726 SHAMRANY INDUSTRIAL


GROUP/BOURNE

Saudi Arabia

Sunday, May 10, 2015

Page 19 of 25

11134 SAMJIN Steel Structure Co., Ltd

Saudi Arabia

All Materails shall be procured from local


market.

11324 GS Neotek Co.Ltd

Saudi Arabia

For BOP only.

10716 ALFANAR STEEL

Saudi Arabia

For:
- Gas Turbine Building Structure
- Substation Structures

10723 Al Zamil Heavy Ind.

Saudi Arabia

10733 Aasia Steel Factory Co Ltd

Saudi Arabia

Structural and miscellaneous


steel,process skids, and pipe spooling
internal alloy cladding.

10727 INT'L BUILDING SYSTEM Factory (IBSF) Saudi Arabia

10728 GEYAD FOR COMMERCE & IMPORT


CO. LTD.

Saudi Arabia

10729 SAUDI METAL COATING CO. Ltd.

Saudi Arabia

10732 AL BABTAIN

Saudi Arabia

Only for Buildings

10734 Al Zamil Metal Works Factory

Saudi Arabia

Storage Tanks including coating and


replacement of slall size and up to
50,000m3 as rebuilt; associated
pipe,linings,connections for fuel
oil,distillate oil,crude

Sunday, May 10, 2015

Page 20 of 25

10740 RAMZ AL-ENSHAA CO.

Saudi Arabia

10712 AL-ZAMIL HEAVY INDUSTRIES

Saudi Arabia

9252 Diamond Energy & Process Corporation

Saudi Arabia

10738 BEMCO Steel Industries (BSI)

Saudi Arabia

10713 HIDADA LTD.

Saudi Arabia

10714 ZAMIL STEEL BUILDINGS

Saudi Arabia

10715 ARABIAN INTERNATIONAL CO. (AIC)

Saudi Arabia

10722 SAUDI CONDRECO LTD

Saudi Arabia

Qualified For

1-Full supervision and guarantee from the


OEM.
2-All Engineering and design shall be
done by the OEM.

Third party inspection & QC/QA services

Rec No Contractor Name

Location

9346 HSB INSPECTION QUALITY

United Kingdom

9347 HUMAN PERFORMANCE


IMPROVEMENTS LIMITED

United Kingdom

Sunday, May 10, 2015

Limitations

Page 21 of 25

9360 DOW CORNING LIMITED

United Kingdom

9341 BRITISH INSTITUTE OF NONDESTRUCTIVE TESTING

United Kingdom

9340 BRITISH INSPECTING ENGINEERS


LIMITED

United Kingdom

9339 BRE CERTIFICATION LIMITED

United Kingdom

9338 BODYCOTE MATERIALS TESTING LTD

United Kingdom

9362 CHEVRON LIMITED

United Kingdom

9337 ARROWHEAD INDUSTRIAL SERVICES


LIMITED

United Kingdom

9343 BUREAU VERITAS INSPECTION


LIMITED

United Kingdom

10272 TUV Rheinland

9345 DET NORSKE VERITAS

Sunday, May 10, 2015

Cologne,
Germany

United Kingdom

Page 22 of 25

9344 CODE-A-WELD HOLDINGS LIMITED

United Kingdom

9365 The ARAB INSPECTION & Q. A. CO.


LTD. (AICO)

Saudi Arabia

9364 Denis Clarke

United Kingdom

9363 BERR Publications Orderline

United Kingdom

10048 SGS

Switzerland

9361 SHELL UK LIMITED

United Kingdom

9357 TWI CERTIFICATION LIMITED

United Kingdom

10046 TUV-SUD

Austria

10045 TUV-SUD

Germany,Colon

10044 TUV-SUD

Germany ,
Hanover

Sunday, May 10, 2015

Page 23 of 25

10428 TUV NORD AG

Hannover,
Germany

9888 TUV-SUD

Germany,
Munich

9359 ZURICH RISK SERVICES

United Kingdom

9342 BSI PRODUCT SERVICES

United Kingdom

9358 VELOSI CERTIFICATION BUREAU


LIMITED

United Kingdom

10047 DEKRA

Germany

9356 TUV UK LIMITED

United Kingdom

9355 SGS UNITED KINGDOM LIMITED

United Kingdom

9354 ROYAL & SUN ALLIANCE


CERTIFICATION SERVICES

United Kingdom

9353 GERMANISCHER LLOYD INDUSTRIAL


SERVICES (UK) LIMITED

United Kingdom

Sunday, May 10, 2015

Page 24 of 25

9351 MOODY INTERNATIONAL


CERTIFICATION LIMITED

United Kingdom

9350 MINTON, TREHARNE & DAVIES LTD

United Kingdom

9349 Lloyd's Register Verification

United Kingdom

9257 Intertek

United Kingdom

Sunday, May 10, 2015

Page 25 of 25

You might also like