You are on page 1of 129

UDC OFFICE AT ABRAJ QUARTIER

SUBMITTAL
GRILLES REGISTERS DIFFUSERS
MANUFACTURER
KHALID MANUFACTURING COMPANY - DOHA, QATAR

MAIN CONTRACTOR

CONSULTANT

MEP CONTRACTOR

M/s BLUU

M/s UDC

M/s MECHATRONICS

P.O.Box 1038, St. 41, New Industrial Area, Doha, Qatar


Tel: +974 4411 4634 / 35, +974 4498 0628, +974 4418 4109 Fax: +974 4499 5088,
Email: info@kmcqatar.com
Web: www.kmcqatar.com

Page Nos.

INDEX
TECHNICAL SUBMITTAL

COMPANY PROFILE

PROJECT SPECIFICATIONS

COMPLIANCE STATEMENT

CATALOGUES & TECHNICAL DATA SHEETS

SQUARE DIFFUSERS - KDF

LINEAR SLOT DIFFUSERS - KSLAD

SINGLE DEFLECTION GRILLE - KX1

DOUBLE DEFLECTION GRILLES - KX2

CIRCULAR DIFFUSERS - KCM

EGG CRATE GRILLES - KECG

DOOR GRILLES - XNSA

LINEAR BAR GRILLES - LBG

COUNTRY OF ORIGIN

CERTIFICATES

ISO CERTIFICATE

WARRANTY CERTIFICATE

CR COPY

PROJECT REFERENCE LISTS

PROJECT APPROVALS

COMPANY PROFILE

Mission
We aspire to be the most valuable and
resourceful company in the field of ElectroMechanical and Architectural solution provider.
Our goal is to enrich the businesses of
customers by bringing to the market the highest
level of technology while our business partners
and employees will continue to share the
accelerated success over years to come.

Vision
Our vision is to be the leading solution
providers for the construction industry in Qatar
and the region. We aim to earn our customers
enthusiasm through credibility, commitment
and expertise of Jersey Group.

Introduction
Khalid Manufacturing Company with its experience in the manufacture of air
distribution products in Qatar for more than three decades has grown over the
years by constantly upgrading its manufacturing process and has earned a
reputation of a local manufacturing facility offering products complying with
international standards.
KMC a proud subsidiary of the Jersey Group since the year 2000 and with a
constant endeavor to manufacture products of international standard, the
company acquired ISO9001:2008 accreditation and invested on new
manufacturing resources and a Total Quality Management system to emerge
as a regional manufacturer of international repute.
At its state of the art manufacturing facility at Qatar, KMC manufactures and
sells
Air Distribution & Control products
Life Safety Damper Products
Sound Control Products

With USD 100m turnover and a workforce of over 1000, Jersey Group has established itself
as one of the leading trading, contracting and manufacturing conglomerate in Qatar and the
region.
Achieving spectacular growth of 20% YoY, Jersey Group has proved to be a solid business
performer for well over a decade providing superior technology and expertise to the
construction industry in Qatar and the region. The Jersey Group takes pride in associating
with major development projects such as the Qatar Foundation, Asian Games Village,
Museum of Islamic Arts, Qatar Petroleum, Qatalum and Barwa Village, to name a few.

Ghanim bin Saad Al Saad & Sons Group Holdings (GSSG) was founded by Ghanim bin Saad Al
Saad in 1993 and incorporated in 2007. Today it is one of Qatars most successful private
sector business groups, making a major contribution to the countrys economic growth.
GSSG has enjoyed steady growth and success in many fields and industries locally and
international. GSSGs diverse portfolio gives its strength and enables its companies within
the group to maximize global business opportunities wherever and whenever they arise.
The founder, Mr. Ghanim bin Saad al Saad, has enabled the group to grow to over 40
companies around the world. As an inspirational business leader, he has steered the group
to achieve its success in industries that include aviation, maritime, automobiles, oil & gas,
real estate, manufacturing, contracting and trading, finance & asset management,
engineering, education, fitness, hotels, hospitality and fashion, information technology and
telecommunications.
In addition to its corporate headquarters in Doha, GSSG also has five international offices
located in London, Zurich, Cairo, Singapore and Dubai.

AIR DISTRIBUTION & CONTROL PRODUCTS

KMC is the name of a pioneer company in air distribution equipment.


AIR DIFFUSERS
Square Cone Diffusers
Architectural Diffusers
Modular Core Diffusers
Diffuser Jet Nozzle
VAV Diffusers
Vortech Swirl Diffuser

Circular Diffusers
Perforated Diffusers
Alumium Linear Slot Diff
Spot Diffuser
Induction Diffusers

GRILLES & REGISTERS


Single Deflection Grilles
Curved Blade Grilles
Alumium Linear Bar Grilles
Infini Jet Drum Louvers

Double Deflection Grilles


Return Grilles
Heavy Duty Grilles
Door Grilles & Louvers

AIR TERMINALS
KMC manufactures a complete line of Air Terminal equipment designed to meet the needs
of an energy and safety conscious world. With energy costs escalating rapidly, the demand
for more efficient products increases just as steadily.

KMCs in house Calibration & Testing facility ensures that our


customers receive the highest quality of products meeting
international standards.

KMC Air terminals are available in a wide array of control


packages using electronic analog or factory installed direct
digital (DDC) controls. Electric heating coils are available in
various voltages and steps of control
Single Duct Terminals
Bypass Terminals

UL Listed LIFE SAFETY DAMPER Products


KMC now manufactures the complete Line of Fire Dampers and Fire / Smoke Dampers,
under exclusive license from Louvers & Dampers, USA(a Mestek Inc, company) at our state
of the art factory in Doha, State of Qatar.
Our philosophy is to provide our customers with the highest level of
performance possible and to independently test and verify that the
performance of our products meets the reliability standard that our
customers require.

As HVAC systems have become more sophisticated, KMC has


continued its role as the industry leader in developing state of the
art UL classified life safety products including fire, fire/smoke and
smoke dampers for both static and dynamic applications.

All Life Safety products are licensed to bear the UL label, meaning
that they have been independently tested and certified to meet UL
standards

KMC manufactures a complete line of sound control products for


commercial, institutional and light industrial HVAC systems.
The toughest noise problems are thoroughly evaluated to provide
you with straightforward acoustical designs that meet the highest of
standards in the industry.
Independently tested to ASTM guidelines for
acoustical and airflow performance with Economical and proven solutions.
Updated testing to the current E477 testing standard for the entire AeroSonics
sound attenuator product offering.
KMC under exclusive license from Aerosonics, USA offers an array of Sound
Products to fulfill the applications our clients require.
Standard Economical Broad Band Noise Reduction
Low Frequency Increased 2nd and 3rd Octave Band Noise Reduction to control noise at low frequencies.
Hospital/Clean Room Broad Band & Low Frequency
Noise Reduction special designed for hospitals and laboratories application.
Elbow Limited Space Broad Band Noise Reduction
Packless Tuned Resonant Chambers
Tubular Economical Solution For fans.
Tubular Improved Performance with addition of Double Wall casing
Tubular Low Frequency
Tubular Fume Hood Applications Packless for Round Ductwork
Transfer/Grille Block out Speech and Disturbing Noises
Acoustical/Thermal Enclosures
Acoustical Louvers Outside Air Intake or Exhaust Openings

PROJECT SPECIFICATIONS

QCS 2010

Section 22

Part 6

Ductwork and Air-Side Equipment

Page 10

The damper unit shall be supplied with a two position indicator switch linked directly to the
damper to provide the capability of remotely indicating damper blade position.

6.4

SILENCERS

6.4.1

General

Silencers shall be installed when required to achieve the specified noise levels.

At shop drawing stage, the contractor will undertake calculation for every unit and every area
and determine the insertion loss required to meet the stated noise criterion.

Supply and return duct noise must be considered as well as duct breakout noise.

Materials of construction shall be galvanized sheet metal and mineral fibre acoustic fill which
is inorganic, inert, moisture and vermin resistant. Silencers shall be so constructed as to
prevent erosion and pregnability of the acoustic fill.

The silencers shall incorporate a removable panel which provides complete access to all
internal surfaces for cleaning and also permits removal and replacement of acoustic fill.

Silencers shall be factory made, and shall have available certified test data concerning
insertion loss. This must be available when required, in advance of ordering units. Where a
silencers is made under licence, or part assembled locally, then tests must also be made
after assembly and witnessed by and independent authority.

The static pressure loss of any required silencer must be considered in air handling
equipment original selection.

Silencers shall be installed in locations as indicated on the contract drawings.

Silencers shall be flanged to exactly match the adjacent ductwork in which they are to be
installed.

6.5

DIFFUSERS AND REGISTERS

6.5.1

General

Diffusers, registers and grilles shall be arranged for flush mounting in lay-in type ceilings and
over lap mounting in plaster, mineral tile and similar ceilings, with concealed fixings unless
otherwise directed

Grilles, register and diffuser locations shall be adjusted to suit reflected ceiling drawings, or
Engineer's site instructions. All grilles, registers, diffusers, louvres shall be from one
manufacturer.

Provide plaster frame for grilles, and diffusers installed in plaster ceilings,

All diffusers, grilles and registers shall be supplied completely factory powder coated. Finish
colour shall be to the approval of the Architect. The interior of all grilles and diffusers is to be
factory painted matt black.

All supply grilles and diffusers will have opposed blade balancing dampers. All will have foam
rubber sealing band around the edge to seal to the structure. All pivots will be round section,
not of formed sheet, and not relying on a spring steel locking wire.

Basic grilles and diffuser materials shall be aluminium extruded sections. Sections in the air
stream shall be carefully selected to minimise turbulence.

QCS 2010

QCS 2010

Section 22

Part 6

Ductwork and Air-Side Equipment

Page 11

All grilles and diffusers supplied on this project shall be tested and rated in accordance with
ASHRAE Standard 70-72, ADC Test Code 1062-GRD and ISO 3741 or have ARI
certification.

Linear bar grilles shall be fabricated from aluminium, with 6.4 mm wide bars on 12.5 mm
centres pressed into a notched steel retaining bar. The core can be either welded into the
cuter frame, or where the grille is used in a sill application, held in the outer frame by spring
clips fixed to the core retaining bar. The outer frame shall be 35 mm deep and shall have a
visible flange 25.4 mm wide, milled end caps shall be welded to give a near invisible joint.
The grill shall be complete with an opposed blade damper painted matt black, and shall be
fixed with universal mounting brackets. Both the damper and the fixing brackets shall be
accessible through the face of the grille. Continuous grilles shall be provided with positive
alignment strips, which fit into special keyways extruded into the frame of the grille to ensure
clean unbroken lines.

Ceiling Diffusers shall be multi-core giving 4 way horizontal discharge. The three centre cores
of the diffuser shall be manufactured from pressed aluminium, with the remaining cores and
the outer frame fabricated from extruded aluminium welded at the corners to give near
invisible joints. One, two and three way pattern cores shall be used as indicated on
schedules. All cores shall be interchangeable. The core shall be removable without the use of
special tools, but for safety, shall be fixed to the outer frame by a small length of chain. The
diffuser shall be complete with an opposed blade damper painted matt black." The damper
shall be adjustable through the face of the diffuser".

10

Wall registers shall be double deflection fabricated from aluminium, the front vanes being
horizontal, the rear vanes vertical. This grille shall be complete with an opposed blade
damper painted matt black and adjustable from the face of the diffuser. Both sets of vanes
shall be fully adjustable without the use of special tools.

11

Eggcrate return or extract grille shall be provided with 12.7 mm x 12.7 mm openings, giving a
free area of 90 %. The core shall be fixed into an extruded aluminium frame, with welded
corners and a 25 mm face flange. The grille is complete with an opposed blade damper
painted matt black and adjustable through the face of the diffuser.

12

Circular ceiling diffuser shall be of aluminium construction with two concentric inner
spinnings. The diffuser core shall be fully adjustable for vertical or horizontal air discharge,
and shall be removable without the use of special tools. An iris damper shall be provided in
the neck of the diffuser which is adjustable from the diffuser face.

13

Vision proof door transfer grilles shall consist of an aluminium core with inverted-vee type
blades, and an extruded aluminium frame with matching rear flange. The frame shall be
adjustable from 28 mm to 60 mm to suit the door width. Transfer grilles for 'LIGHT TIGHT'
applications such as dark rooms shall be with two vision proof cores back to back.

14

Linear slot diffusers shall provide an unobtrusive continuous air diffusion with a pleasing
aesthetic appearance. Hairline butt joints shall ensure clean unbroken linear runs for active
and dummy sections. The diffusers shall be complete with pattern control blades, fully
adjustable from face of diffuser through 180 degrees and shall be fitted with end caps at each
end. The diffuser members shall be constructed from high quality aluminium extrusions to
BS 1474 while the pattern control blades shall be of black rigid PVC or aluminium extrusions.

6.6

LOUVRES

6.6.1

Outside Louvres

Outside louvres shall be supplied with sleeves for the appropriate openings, and with full
installation instructions.

QCS 2010

COMPLIANCE STATEMENT

Page 1 of 6

Noted.

Comply.

Provide plaster frame for grilles, and diffusers installed in


plaster ceilings

All diffusers, grilles and registers shall be supplied


completely factory powder coated. Finish colour shall be
to the approval of the Architect. The interior of all grilles
and diffusers is to be factory painted matt black.

Noted.

Comply. See remarks.

Proposed Model: KDF 41 /0

COMPLIANCE

Comply.

Diffusers, registers and grilles shall be arranged for flush


mounting in lay-in type ceilings and over lap mounting in
plaster, mineral tile and similar ceilings, with concealed
fixings unless otherwise directed.
Grilles, register and diffuser locations shall be adjusted to
suit reflected ceiling drawings, or Engineer's site
instructions.

DIFFUSERS AND REGISTERS

QCS SPECIFICATION REQUIREMENT

All grilles, registers, diffusers, louvers shall be from one


manufacturer.

S.No.

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

Any other RAL colour can be provided as an optional


extra.

Opposed Blade Damper in black finish shall be


provided behind all the proposed grilles and
diffusers.

Interiors of all grilles & diffusers will be powder


coated to RAL 9010 as standard.

Proposed grilles and diffusers shall be powder


coated in RAL 9010 colour as standard.

Installation to be complied MEP contractor.

All the proposed grilles and diffusers shall be


supplied by M/s Khalid Manufacturing Co. and are
manufactured in Doha, Qatar.

MEP contractor to select the zones & locations


accordingly.

All proposed grilles & diffusers are suitable for


surface mounting.
Installation to be complied MEP contractor.

REMARKS

27/06/2016

Page 2 of 6

COMPLIANCE

Comply with pivots section having


spring steel locking wire
arrangement.

Comply.

Comply.

Comply.

QCS SPECIFICATION REQUIREMENT

All supply grilles and diffusers will have opposed blade


balancing dampers. All will have foam rubber sealing
band around the edge to seal to the structure.All pivots
will be round section, not of formed sheet, and not relying
on a spring steel locking wire.

Basic grilles and diffuser materials shall be aluminium


extruded sections. Sections in the air stream shall be
carefully selected to minimise turbulence.

All grilles and diffusers supplied on this project shall be


tested and rated in accordance with ASHRAE Standard
70-72, ADC Test Code 1062-GRD and ISO 3741 or have
ARI certification.

Linear bar grilles shall be fabricated from aluminium, with


6.4 mm wide bars on 12.5 mm centres pressed into a
notched steel retaining bar.

S.No.

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

with

with 6.4 mm wide bars on 12.7 mm centres.

Proposed Model for supply: LBG /0


.

Proposed grilles and diffuser's performance are


rated in accordance with to ASHRAE Standard 70.

Spring steel wires are provided for adjustment as


well as to ensure positioning of the blades once set.

Spring steel wire used to provide smooth positive


operation of blades and to lock the set blades in
position as compared to standard bushes which tend
to shift position due to easier movement of the
blades.

Comply with round section pivots.

Grilles & diffusers frames are lined


Compressible foam gasket to prevent leakage.

All supply Grilles & diffusers are Provided with


opposed blade dampers.

REMARKS

27/06/2016

Page 3 of 6

S.No.

Comply.

Comply.

Comply.

Comply.

The outer frame shall be 35 mm deep and shall have a


visible flange 25.4 mm wide, milled end caps shall be
welded to give a near invisible joint.

The grill shall be complete with an opposed blade damper


painted matt black, and shall be fixed with universal
mounting brackets. Both the damper and the fixing
brackets shall be accessible through the face of the grille.

Continuous grilles shall be provided with positive


alignment strips, which fit into special keyways extruded
into the frame of the grille to ensure clean unbroken lines.

Ceiling Diffusers shall be multi-core giving 4 way


horizontal discharge.

All cores shall be interchangeable.

Comply.

Noted & Comply.

Comply.

Noted & Comply.

The core can be either welded into the outer frame, or


where the grille is used in a sill application, held in the
outer frame by spring clips fixed to the core retaining bar.

The three centre cores of the diffuser shall be


manufactured from pressed aluminium, with the
remaining cores and the outer frame fabricated from
extruded aluminium welded at the corners to give near
invisible joints.
One, two and three way pattern cores shall be used as
indicated on schedules.

COMPLIANCE

QCS SPECIFICATION REQUIREMENT

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

Proposed Model : KDF41 /0


- 4 way horizontal discharge.
- Extruded aluminium construction.

Installation with spring clips to be complied by MEP


Contractor.

REMARKS

27/06/2016

Page 4 of 6

11

10

S.No.

Comply.

Comply with lock sets on cores.

Comply.

Comply.

The diffuser shall be complete with an opposed blade


damper painted matt black.

Wall registers shall be double deflection fabricated from


aluminium, the front vanes being horizontal, the rear
vanes vertical.

This grille shall be complete with an opposed blade


damper painted matt black and adjustable from the face
of the diffuser.

Both sets of vanes shall be fully adjustable without the


use of special tools.

Noted & Comply.

Comply.

The core shall be removable without the use of special


tools, but for safety, shall be fixed to the outer frame by a
small length of chain.

Eggcrate return or extract grille shall be provided with


12.7 mm x 12.7 mm openings, giving a free area of 90 %.
The core shall be fixed into an extruded aluminium frame,
with welded corners and a 25 mm face flange.

COMPLIANCE

QCS SPECIFICATION REQUIREMENT

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

Flange: 15mm

Construction : Aluminium frame.


Core : 12.7 mm x 12.7 mm aluminium core.

Proposed Model : KECG

Double deflection Blades


Horizontal front adjustable Blades.
Vertical rear adjustable Blades.
Material : Aluminium

Proposed Model : KX2H/O

Proposed square diffusers are provided with lock


sets to ensure that the cores are secured to the
frames for safety. Separate chain not proposed.

REMARKS

27/06/2016

Page 5 of 6

Comply.

Comply with fixed cores.

Circular ceiling diffuser shall be of aluminium construction


with two concentric inner spinnings.

The diffuser core shall be fully adjustable for vertical or


horizontal air discharge, and shall be removable without
the use of special tools.

Linear slot diffusers shall provide an unobtrusive


continuous air diffusion with a pleasing aesthetic
appearance. Hairline butt joints shall ensure clean
unbroken linear runs for active and dummy sections.

13

14

Noted & Comply.

Comply. See remarks.

Comply with Flat type damper.

Comply.

The grille is complete with an opposed blade damper


painted matt black and adjustable through the face of the
diffuser.

An iris damper shall be provided in the neck of the


diffuser which is adjustable from the diffuser face.

COMPLIANCE

QCS SPECIFICATION REQUIREMENT

Vision proof door transfer grilles shall consist of an


aluminium core with inverted-vee type blades, and an
extruded aluminium frame with matching rear flange. The
frame shall be adjustable from 28 mm to 60 mm to suit
the door width.
Transfer grilles for 'LIGHT TIGHT' applications such as
dark rooms shall be with two vision proof cores back to
back.

12

S.No.

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

Installation to be complied by MEP Contractor.

Proposed Model: KSLAD/KRLAD

The frame of the transfer grille consists of two parts


one fixed ( holding the core ) while the part is of
sliding type which is then fixed to the other side of
the partition.

Construction : Aluminium inverted-vee type blades


on aluminium frame.

Proposed Model : XNSA

Proposed circular diffuser model has fixed cores but


are removable without the use of special tools.

Proposed Model : KCM -1 /VD


Construction : Aluminium with concentric inner
spinnings.

REMARKS

27/06/2016

Page 6 of 6

14

S.No.

Comply.

Comply.

The diffusers shall be complete with pattern control


blades, fully adjustable from face of diffuser through
180 degrees and shall be fitted with end caps at each
end.

The diffuser members shall be constructed from high


quality aluminium extrusions to BS 1474 while the
pattern control blades shall be of black rigid PVC or
aluminium extrusions.

Comply.

The diffuser members shall be constructed from high


quality aluminium extrusions to BS 1474 while the pattern
control blades shall be of black rigid PVC or aluminium
extrusions.

Noted & Comply.

Comply.

The diffusers shall be complete with pattern control


blades, fully adjustable from face of diffuser through 180
degrees and shall be fitted with end caps at each end.

Linear slot diffusers shall provide an unobtrusive


continuous air diffusion with a pleasing aesthetic
appearance. Hairline butt joints shall ensure clean
unbroken linear runs for active and dummy sections.

COMPLIANCE

QCS SPECIFICATION REQUIREMENT

Project Name: UDC OFFICE AT ABRAJ QUARTIER


Main Contractor: M/s BLUU
Consultant: M/s UDC
MEP Contractor: M/s MECHATRONICS

COMPLIANCE STATEMENT

Comply with aluminium extruded profiles including


pattern control blades to 6063T6

Installation to be complied by MEP Contractor.

Proposed Model: KSLAD/KRLAD

Proposed slot diffusers are manufactured using


Extruded Aluminium & are powder coated to RAL
9010 as standard. Any other color will be an optional
extra.

REMARKS

27/06/2016

CATALOGUES & TECHNICAL DATA SHEETS

SQUARE DIFFUSERS - KDF

KDF
Air Diffusers
Square Diffusers
Introduction
The performance objective of a ceiling air
Diffuser is to deliver conditioned air into an
occupied space in a quiet draft free manner.
5IF QFSGPSNBODF FGmDJFODZ PG B QBSUJDVMBS
diffuser design is usually judged by the
diffusers ability to rapidly dissipate the air
velocities and temperature differential of the
supply air before it enters the occupied space.
Many Models are developed by KMC to meet air
distribution and architectural requirements.

Application
t Versatile Supply Air Diffuser for constant
or variable air volume cooling, heating or
ventilating
t Designed for high capacity, KMC Model
Series KD can supply large volumes of air
at low sound levels and pressure drops.
t Directed air diffusion for space coverage with
HSFBU nFYJCJMJUZ JO TQBDF MBZPVU  HFPNFUSZ 
and diffuser location.
t Return Air use
appearance

to

maintain

matched
Model KDF - Surface Mounted

Product Features
t  iBQQMJDBUJPO TQFDJmDw BJS EJTUSJCVUJPO
patterns 1 way, 2 way opposite, 2 way
corner, 3 way, and 4 way
t Core is removable to facilitate access to duct
/ damper
t Concealed core attachment NO screws

Construction
t Frame & inner cores are made of Extruded
"MVNJOVN 1SPmMFT PG 5 "MMPZ  XIJDI
allow the diffusers to be suitably used for
both internal & external applications.
t Available in wide variety of sizes ranging
from 150mmx150mm up to 600mmx600mm
available in 75mm increments.

Model KDP - Lay in T-Bar

t 5IFDPSFJTIFMEJOQMBDFmYFEUPUIFGSBNF
by two nos. lock sets.
t Foam Gasket seal around the back of the
frame as option to avoid air leakage.

Selection Procedure :
Selections can be made by means of straight
read-off from the Performance Tables
t Determine air diffusion pattern required and
BJSWPMVNFnPXSBUFQFSPVUMFU
t Establish the required throw (Refer Notes for
Throw Pattern)
Opposing Diffusers : Maximum Throw for
each diffuser should be no more than 75% of
half of the distance between them.
t 4FMFDUUIFEJGGVTFSCBTFEPOSFRVJSFE"JSnPX
rate against the limiting pressure drop and
sound level requirements.

Product Selection Check List


t Select Inlet (L X W) Size based on desired performance requirements.
t Select face size based on ceiling module ( Lay-in Application Only)
t Select core style based on application.
t Select volume control accessories, if desired (OBD)
t 4FMFDUmOJTI

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

KDF
Air Diffusers
Performance Data
mm

mm

Performance Data
mm

mm

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

KDF
Air Diffusers
Performance Data
mm

mm

Performance Data
mm

mm

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

KDF
Air Diffusers
Performance Data

mm

mm

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

KDF
Air Diffusers
Performance Data
mm

mm

Performance Data (Return Air)


mm

mm

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

KDF
Air Diffusers
Performance Data
mm

mm

Notes :

Throw

Standard

The numbers shown are throw distances, in meters, measured


along the jet trajectory axis relating to terminal velocities of 0.75,
0.5 &0.25 m/s with the jet attached to the ceiling surface.

ANSI / ASHRAE standard 70


Sound Levels
NC is noise criteria curve that will not be exceeded at the operating
point for the supply air volume shown. This is determined by
assuming a 10dB(ref: 10-12 watts) room attenuation that is
subtracted from the power levels in each of the 2nd thru 7th octave
bands.
Return Use: Add + 2 to the NC shown in the tables.
Pressure

Data for core patterns indicating L & S represent the throw distance
at the CMH referenced for the side shown. These non-symmetrical
cores proportion air based on pattern & neck size.
Terminal velocity is the air speed, in meters per second, measured
in the supply airstream.
Neck Velocity
Meters per second (m/s), measured in the supply duct

Pt represents Total Pressure, Pascal (Pa), measured in the supply


duct

*In the interest of product development, KMC reserves the right to make changes without notice.

10

www.kmcqatar.com

KDF
Air Diffusers
Square Diffusers

CORE PATTERNS

MODEL

MATERIAL

 KDF - Flange
 KDP - Lay -in

 Aluminum

NECK SIZES
 .')[WR[
 KDP - [WR[

PANEL SIZES
(Model KDP Only)
Aluminum
 [WR[

FINISH






KSRA INLET SIZE








None
PP
PP
PP
PP







PP
PP
PP
PP
400mm

3XUH:KLWH
Optional RAL Colors
Custom Color Match
Mill Finish (Aluminum Only)
Natural Anodized
(Aluminum Only)

OPTIONAL EQUIPMENT
Unit Mounted
 %2%%ODQNRII%DIH :D\
 .65$6TXDUHWR5RXQG$GDSWHU ,QOHW6L]HVPP
to 400mm)
 OBD - Opposed Blade Damper ( Duct Mounted)

5ZQJDBMTQFDJmDBUJPO
Ceiling diffusers shall be directional type Model KDF/KDP as
manufactured by KMC, and shall have a square or rectangular neck.
%JGGVTFSTTIBMMIBWFBmYFE IPSJ[POUBMBJSEJTDIBSHFQBUUFSO BOETIBMMCF
DPOmHVSFEXJUIB  PSXBZDPSFEJTDIBSHFQBUUFSOBTTDIFEVMFE
The diffuser core shall be removable, without tools, for cleaning or reDPOmHVSJOHUIFTQBDFBJSEJTUSJCVUJPO/PTDSFXIPMFTTIBMMCFWJTJCMF
Diffusers shall be constructed from Extruded Aluminium as scheduled.

to include opposed blade volume control dampers, and equalizing


EFnFDUPST BT TDIFEVMFE  %BNQFST TIBMM CF BEKVTUBCMF GSPN UIF SPPN
side by removing, without tools, the inner core assembly.
5IF QPXEFS DPBUFE mOJTI TIBMM CF ,.$ TUBOEBSE 3"-  PS DPMPS BT
scheduled.
If custom, a sample color chip shall be provided to the diffuser
manufacturer (KMC).

Accessories shall be provided as required and scheduled to meet the


design intent. Model KSRA square to round duct adapters shall be used
JO USBOTJUJPOJOH UP SPVOE EVDU  "EBQUFST TIBMM CF PG TVGmDJFOU IFJHIU

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

11

KDF
Air Diffusers
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

12

www.kmcqatar.com

LINEAR SLOT DIFFUSERS - KSLAD

KSLAD
Air Diffusers
Linear Slot Diffusers
Introduction
Linear Slot Diffusers manufactured by KMC have
been designed to satisfy architectural concepts
that require continuous length applications
without
compromising
air
distribution
performance.
These diffusers utilizes an adjustable vane in
each slot to control the direction of air discharge
either parallel with or perpendicular to its face
surface.
The adjustment from the face of the diffuser
allows for pattern control in a full 180 degree
range for either right or left parallel, intermediate
or perpendicular.

Application
t Versatile supply linear diffuser for wall,
ceiling or sill installation.
t Adjustable air discharge pattern for
horizontal or vertical directions.
t Provides draft free comfort for both heating
and cooling.
t %FTJHOFE GPS FGmDJFOU BJS EJTUSJCVUJPO BU
cooling differentials up to 16C.
t Can be used for combination - supply, return
or return only.
t Continuous runs with active and inactive
sections.

Product Features
t Extruded aluminum construction with
BUUSBDUJWF EVSBCMFmOJTI
t Pattern control designed for easy adjustment
of horizontal or vertical discharge.
t 0VUFSnBOHFT DFOUFSUFFTBOEFOEDBQT
t Flat pattern control element and adjustment
vanes for clean architectural look.
t Available in three slot widths, 12.5mm,
19mm, 25mm.
t Available in single piece lengths from
300mm to 2500mm.
t Units for continuous run applications
provided with concealed key-ways and
alignment strips for exact alignment and
clean, neat appearance.

Pattern Control Flexibility

Diffuser Options
t Plenumsinsulated or non-insulated.
t Mitered corners for ceiling or wall
applications.
t #MBOLPGGCBGnFT
t Powder Coated to RAL 9010 as standard
t Custom colors (provide RAL color codes)

Pattern & Volume Adjustment


The adjustable vanes include an integral slot
to allow the tool to engage the vane and by
rotating the tool as shown, position the vane as
required for the pattern and air volume required
for the application.

Product Selection Check List


t Select Unit length based on installation / performance requirements.
t Select outlet type (Slot Width) by Model No.
t Select Number of slots based on desired performance requirements.
t Select accessories
t Select end connection requirements.
t Select Finish

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

13

KSLAD
Air Diffusers
Miter Corners
Application
t Diffuser component to provide change in
direction for KSLAD series linear diffusers
and return units.
t $FJMJOHTBOEXBMMT nBUTVSGBDFT
oGBDFNJUFS
t Wall-wall corners or wall-ceiling corners.
t Inside corners (inside stack miter).
t Outside corners (outside stack miter).

Product Features
t Welded corner with standard 45 or 90 face
miter or 90 stack miter.
t Constructed from the same aluminum
extrusions provided on KSLAD diffusers and
returns.
t Available to match any KSLAD mounting
frame style, slot quantity, slot width.
t Alignment strips and keyways for precise
alignment with mating linear units.
t Custom Angles available.

Selection Procedure
The selections can be made by means of a
straight read-off from the Performance Data
for the selected slot width.
t %FUFSNJOF UIF "JS nPX SBUF QFS MJOFBS NFUFS
CZEJWJEJOHUIFUPUBMBJSnPXCZUIF%JGGVTFS
length.
t Establish the required Throw (Refer Notes for
Throw Pattern).
t Opposing Diffusers: Maximum Throw for
each diffuser should be no more than 75% of
half of the distance between them.
t 4FMFDUUIFEJGGVTFSCBTFEPOSFRVJSFE"JSnPX
rate against the limiting pressure drop and
sound level requirements.

Accessories

*In the interest of product development, KMC reserves the right to make changes without notice.

14

www.kmcqatar.com

KSLAD
Air Diffusers
KSLAD - 50

12.5mm Slot - Horizontal Pattern - One Way

12.5mm Slot - Vertical Pattern

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

15

KSLAD
Air Diffusers
KSLAD - 75

19mm Slot - Horizontal Pattern - One Way

19mm Slot - Vertical Pattern

*In the interest of product development, KMC reserves the right to make changes without notice.

16

www.kmcqatar.com

KSLAD
Air Diffusers
KSLAD - 100

25mm Slot - Horizontal Pattern - One Way

25mm Slot - Vertical Pattern

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

17

KSLAD
Air Diffusers
KRLAD - 50

12.5mm Slot - Return Air

KRLAD - 75

19mm Slot - Return Air

KRLAD - 100

25mm Slot - Return Air

*In the interest of product development, KMC reserves the right to make changes without notice.

18

www.kmcqatar.com

KSLAD
Air Diffusers
Notes
Standard
ANSI / ASHRAE standard 70
Sound Levels
t NC is noise criteria curve that will not be exceeded at the
operating point. This is determined by assuming a 10dB (ref: 10-12
watts) room attenuation that is subtracted from the power levels
in each of the 2nd thru 7th octave bands

Vertical Projection
t The numbers shown in table are projection distances, in meters,
measured along the jet trajectory axis relating to a terminal
velocity of 0.25m/s, for a 1.2m active length. H based on a heating
differential of 12 C. C based on a cooling differential of 12 C.
For other active lengths, use the following projection adjustment
factors:

t NC shown is based on 1.2m diffuser length. For other active


lengths, use the following adjustment factors:
Terminal velocity is the air speed, in meter per second, measured in
the supply air stream.
Pressure
Ps represents Static Pressure, Pa
Throw
t For ceiling installed KSLAD, large numbers of slots in a single
direction should be carefully studied for drop effects.

Model KRLAD Return Data


Sound and pressure data shown for return unit without internal
components.

t The numbers shown in table are throw distances in meter,


measured along the jet trajectory axis relating to terminal
velocities of 0.75m/s, 0.5m/s, & 0.25m/s, with the jet attached to
a surface for a 3m+ active length. These are ONE way patterns. For
other active lengths, use the following throw adjustment factors:

t For two way applications, determine proportion of air in each


direction and refer to throw distance for number of slots in the
same direction.
Terminal velocity is the air speed, in meter per second, measured in
the supply air stream
High Sidewall Applications
KSLAD diffuser when used in a high sidewall the air can be:
t Projected vertically up the side wall to the ceiling. In this case
use the horizontal pattern data, subtracting the KSLAD to ceiling
distance from the throw distance given. This is the preferred
method.
t Directed horizontally and attaches itself to the ceiling via the
Coanda effect. In this case, use the vertical projection throw
(average of heating and cooling value) times 1.4 when the KSLAD
is located close to the ceiling. Decrease the factor 1.4 by .1 (down
to a minimum of 1.0) for every 300mm the KSLAD is located below
the ceiling. The drop effect must also be studied closely when
cooling is used in conjunction with this high sidewall KSLAD
mounted more than 300mm 600mm below the ceiling.

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

19

KSLAD
Air Diffusers
Linear Slot Diffusers

MODEL
KSLAD - Supply
KRLAD - Return

SLOT WIDTH

MOUNTING TYPE

 PP6ORW
 PP6ORW
 PP6ORW

 F type - Surface Mount


:LGHRXWHUDQJH

NUMBER OF SLOTS





6ORW
6ORW
6ORW
4 Slot






6ORW
6ORW
6ORW
8 Slot

NOMINAL LENGTH
WRPP/RQJ
single piece construction

FINISH





3XUH:KLWH 5$/
Optional RAL Colors
Mill Finish
Natural Anodized

EQUALIZING DEFLECTOR
 None
 Model KED Equalizing
'HHFWRU
 Egg crate Straightener

PIECE TYPE






End caps on both ends of piece


End cap on one end - part of continuous run
No end caps - center piece of continuous run
Face Miter
Stack Miter

5ZQJDBM4QFDJmDBUJPO (Model : KSLAD / RLAD)


Aluminum linear slot supply diffusers shall be KMC Model KSLAD
Straight Line Adjustable Diffusers, Model KRLAD matching
returns (without pattern control vanes. Outer frame type shall
DPOGPSNBOEJOUFHSBUFXJUIUIFnPPS XBMM PSDFJMJOHUZQFTIPXO
Linear diffusers shall be available up to 2000mm in single-piece
length, and have 1 to 8 slots, with a slot width of 12.5mm, 19.0mm
and 25.0mm as scheduled for the appearance and performance
requirements as shown.

to control air volume and pattern (direction) for vertical or


horizontal directions. Inactive sections shall be blankedPGG VUJMJ[JOH nPX DPOUSPM WBOFT %JGGVTFS MFOHUIT HSFBUFS UIBO
NN TIBMM JODMVEF NVMUJQMF QJFDF nPX DPOUSPM WBOFT 5IF
physical appearance of the face of supply diffusers shall not
change regardless of these adjustments. Supply diffusers and
return units shall also be identical in appearance from the face.
Ice tong designs are not acceptable.

Diffuser runs greater than 2000mm long shall consist of multiple


diffusers aligned end-to-end using alignment strips within
the diffuser keyways, to form a continuous slot appearance.
Alignment strips shall be provided by the diffuser manufacturer
(KMC).

Concealed mounting brackets, accessible by removal of inner


assemblies, shall be provided for attaching to the supply duct /
plenum without any visible mounting screws.

Diffusers and matching returns shall consist of extruded


aluminum frames, tees, and pattern control components
assembled using heavy gauge, coated steel cross members
for rigidity. All movable air control components shall be
extruded aluminum -steel and plastic control components
are not acceptable. Inverted tee members and pattern control
components shall be secured to the steel cross members with
heavy-duty springs. These components shall be removable,
without tools, providing access to the plenum to install as
detailed.

Finish shall be KMC Standard color (RAL 9010) or color as


TDIFEVMFEPSTFMFDUFECZUIF"SDIJUFDUXJUInBUCMBDLQBUUFSO
volume control elements.
KSLAD Accessories
,.$.PEFM,&%&RVBMJ[JOH%FnFDUPSTTIBMMCFQSPWJEFE GPSmFME
installation and adjustment, for lateral control of the air pattern
at 90 to the axis of continuous runs of units, or for spread
pattern control of single units. (Optional) 12.7 mm x 12.7 mm x
12.7mm aluminum egg crate material shall be provided in the
neck of the supply linear diffusers to improve directional control
of the supply air stream.

5IF BMVNJOVN FYUSVEFE nPX DPOUSPM WBOFT VUJMJ[FE JO TVQQMZ


diffusers shall be independently adjustable within each slot

*In the interest of product development, KMC reserves the right to make changes without notice.

20

www.kmcqatar.com

KSLAD
Air Diffusers
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

21

SINGLE DEFLECTION GRILLE - KX1

KX1
Grilles
4JOHMF%FnFDUJPO(SJMMF
Introduction
KMC supply Grilles and Registers usually have
adjustable louvers and are available in single
PSEPVCMFEFnFDUJPONPEFMT
5IF 4JOHMF EFnFDUJPO HSJMMFT BSF EFTJHOFE UP
have one set of blades in the horizontal or
vertical orientation.
Air pattern is adjustable in one plane only.
The Horizontal type provides the control over
UIFEFnFDUJPOPGUIFBJSQBUUFSOPOBEKVTUNFOUT
whereas the vertical type provides the spread
control of the air pattern reducing both throw
and drop.

Application

Model KX1V
Horizontal Front Adjustable Blades, 19mm Spacing
Model KX1VO with Opposed Blade Damper
Horizontal Front Adjustable Blades, 19mm Spacing

t Recommended for heating, cooling, or


ventilating applications.
t Versatile directional, throw distance, and
spread pattern control.
t 5ZQJDBMMZ JOTUBMMFE IJHI JO B TJEFXBMM  TPGmU 
or Duct.

Product Features
t 4JOHMFEFnFDUJPOTVQQMZHSJMMFTBOESFHJTUFST
exceeding the industry standard using
corrosion resistant aluminum materials
t Single set of horizontal or vertical blades
t Aerodynamic blade design resulting in
lowest achievable sound and pressure levels

Model KX1H
Horizontal Front Adjustable Blades, 19mm Spacing
Model KX1HO with Opposed Blade Damper
Horizontal Front Adjustable Blades, 19mm Spacing

t 19mm spacing of individually adjustable


blades
t Blades rotate smoothly without bending.
t Registers include a factory attached,
opposed blade volume control damper
t Powder coated to RAL 9010 as standard
t Maximum size one piece construction is
1200mm x 1200mm
t Larger sizes shipped in multiple sections for
mFMEBTTFNCMZ

Options
t Mounting holes in frame neatly countersunk
t Custom Colors

Selection Procedure :
The selections can be made by means of a
straight read-off from the Performance Data
for the selected Model.
t %FUFSNJOFUIF"JSnPXSBUFQFSPVUMFU
t Establish the required Throw (Refer Notes for
Throw Pattern) Opposing Grilles : Maximum
Throw for each Grille should be no more than
75% of half of the distance between them.
t 4FMFDU UIF (SJMMF CBTFE PO SFRVJSFE "JS nPX
rate against the outlet velocity, limiting
pressure drop and sound level requirements.

Product Selection Check List


t Select Unit Size (L x W) based on desired performance characteristics.
t Select outlet type by Model Number.
t Select blade orientation.
t Select fastening type (Face / Concealed)
t Select Finish

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

51

KX1
Grilles
4JOHMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

52

www.kmcqatar.com

KX1
Grilles
4JOHMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

53

KX1
Grilles
4JOHMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

54

www.kmcqatar.com

KX1
Grilles
4JOHMF%FnFDUJPO(SJMMFT
Standard
ANSI / ASHRAE standard 70

Without damper, reduce NC -3


Without damper, reduce Ps x .75

For large grilles with a cooling differential, the drop of the air stream
should be evaluated.
Data includes opposed blade volume control damper in full open
position.

Sound Levels
NC shown is for 0 blade angle setting and is noise criteria curve
that will not be exceeded at the operating point. This is determined
by assuming a 10dB (ref: 10-12 watts) room attenuation that is
subtracted from the power levels in each of the 2nd thru 7th octave
bands. For 22.5 blade angle setting, add 2 NC to the tabulated value
shown. For for 45 blade angle setting, add 6 NC to the tabulated
value shown.

Throw
The numbers shown are throw distances, in meters, measured along
the jet trajectory axis relating to terminal velocities of 0.75,0.5, &
0.25 m/s, with the jet attached to the ceiling surface. 0, 22.5,45
SFQSFTFOU UIF CMBEF EFnFDUJPO PS TQSFBE BOHMF TFUUJOHT 5FSNJOBM
velocity is the air speed, in meters per second, measured in the
supply air stream.

Neck Velocity, Core Velocity


Meters per second (m/s)
Pressure
Ps represents Static Pressure, Pa

Opposed Blade Volume Control Dampers (OBD)


Data shown includes OBD (wide open)

FACE BLADES

WIDTH
PPWRPP

MODEL
19mm Blade Spacing
 .;$OXPLQXP6LQJOH'HHFWLRQ

 Horizontal
 Vertical

HEIGHT
PPWRPP

FINISH






3XUH:KLWH 5$/
Optional RAL Colors
Custom Color Match
Mill Finish (Aluminum Only)
Natural Anodized (Aluminum Only)

ACCESSORIES
 OPPOSED BLADE DAMPER
 OBD - ALUMINUM
 NO BORDER MOUNTING HOLES

5ZQJDBM4QFDJmDBUJPO4JOHMF%FnFDUJPO(SJMMFT
19mm Blade Spacing
4JOHMF EFnFDUJPO TVQQMZ HSJMMFT BOE SFHJTUFST TIBMM CF ,.$
.PEFM ,9 BMVNJOVN  TJOHMF EFnFDUJPO
 PS ,9 BMVNJOVN 
EPVCMFEFnFDUJPO
XJUINNCMBEFTQBDJOHBOEBTTDIFEVMFE

Blades shall rotate smoothly without bending and include


a friction design to hold blade position, and prevent rattling.
Frame mounting holes shall be countersunk for oval head
screws, provided by the grille manufacturer (KMC).

The grilles shall consist of an outer border or frame, with face


directional blades horizontal or vertical as detailed. Blades
shall be individually adjustable and designed to minimize noise
and pressure loss, and shall consist of an extruded aluminum
DMPTFEQSPmMF

Where scheduled and as shown, provide optional aluminum,


face operated opposed blade volume control dampers.
Finish shall be powder coated with RAL 9010 or custom color as
TQFDJmFECZUIF"SDIJUFDU

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

55

KX1
Grilles
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

56

www.kmcqatar.com

DOUBLE DEFLECTION GRILLES - KX2

KX2
Grilles
%PVCMF%FnFDUJPO(SJMMFT
Introduction
KMC supply Grilles and Registers usually have
adjustable louvers and are available in single
PSEPVCMFEFnFDUJPONPEFMT
5IF %PVCMF EFnFDUJPO HSJMMFT BSF EFTJHOFE UP
have two sets of blades in both the horizontal
or vertical orientation with air pattern being
adjustable in both horizontal and vertical
planes.
Adjustment of the Horizontal blades provide
UIFDPOUSPMPWFSUIFEFnFDUJPOPGUIFBJSQBUUFSO
Adjustment of the vertical blades provide the
spread control of the air pattern , reducing both
throw and drop.

Model KX2V
Vertical Front Adjustable Blades
Horizontal Rear Adjustable Blades 19mm Spacing
Model KX2VO with Opposed Blade Damper
Vertical Front Adjustable Blades
Horizontal Rear Adjustable Blades 19mm Spacing

Application
t Recommended for heating, cooling, or
ventilating applications
t Versatile directional, throw distance, and
spread pattern control
t 5ZQJDBMMZ JOTUBMMFE IJHI JO B TJEFXBMM  TPGmU 
or Duct

Product Features
t %PVCMFEFnFDUJPOTVQQMZHSJMMFTBOESFHJTUFST
exceeding the industry standard using
corrosion resistant aluminum materials
t Aerodynamic blade design resulting in
lowest achievable sound and pressure levels
t 19mm spacing of individually adjustable
blades rotate smoothly without bending
t Front blades selected as horizontal or vertical
for visual effect
t Registers include a factory attached,
opposed blade volume control damper
t Powder coated to RAL 9010 as standard
t Maximum size one piece construction is
1200mm x 1200mm
t Larger sizes shipped in multiple sections for
mFMEBTTFNCMZ

Model KX2H
Horizontal Front Adjustable Blades
Vertical Rear Adjustable Blades 19mm Spacing
Model KX2HO with Opposed Blade Damper
Horizontal Front Adjustable Blades
Vertical Rear Adjustable Blades 19mm Spacing

Options
t Mounting holes in frame neatly countersunk
t Custom Colors

Selection Procedure
t The selections can be made by means of
a straight read-off from the Performance
Data for the selected Model.
t %FUFSNJOFUIF"JSnPXSBUFQFSPVUMFU
t Establish the required Throw (Refer Notes for
Throw Pattern)
t Opposing Grilles : Maximum Throw for each
Grille should be no more than 75% of half of
the distance between them.
t 4FMFDU UIF (SJMMF CBTFE PO SFRVJSFE "JS nPX
rate against the outlet velocity, limiting
pressure drop and sound level requirements.

Product Selection Check List


t Select Size (L x W) length based on installation / performance requirements.
t Select outlet type by Model No.
t Select blade orientation.
t Select fastening type (Face / Concealed)
t Select Finish

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

57

KX2
Grilles
%PVCMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

58

www.kmcqatar.com

KX2
Grilles
%PVCMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

59

KX2
Grilles
%PVCMF%FnFDUJPO(SJMMFT

*In the interest of product development, KMC reserves the right to make changes without notice.

60

www.kmcqatar.com

KX2
Grilles
%PVCMF%FnFDUJPO(SJMMFT
Standard
ANSI / ASHRAE standard 70

Without damper, reduce NC -3


Without damper, reduce Ps x .75

For large grilles with a cooling differential, the drop of the air stream
should be evaluated.
Data includes opposed blade volume control damper in full open
position.

Sound Levels
NC shown is for 0 blade angle setting and is noise criteria curve
that will not be exceeded at the operating point. This is determined
by assuming a 10dB (ref: 10-12 watts) room attenuation that is
subtracted from the power levels in each of the
2nd thru 7th octave bands. For 22.5 blade angle setting, add 2 NC
to the tabulated value shown. For 45 blade angle setting, add 6 NC
to the tabulated value shown.

Throw
The numbers shown are throw distances, in meters, measured along
the jet trajectory axis relating to terminal velocities of
0.75,0.5, & 0.25 m/s, with the jet attached to the ceiling surface.
  SFQSFTFOUUIFCMBEFEFnFDUJPOPSTQSFBEBOHMFTFUUJOHT
Terminal velocity is the air speed, in meters per second, measured
in the supply air stream.

Neck Velocity, Core Velocity


Meters per second (m/s)
Pressure
Ps represents Static Pressure, Pa

Opposed Blade Volume Control Dampers (OBD)


Data shown includes OBD (wide open)

FACE BLADES

WIDTH
PPWRPP

MODEL
19mm Blade Spacing
 .;$OXPLQXP'RXEOH'HHFWLRQ

 Horizontal
 Vertical

HEIGHT
PPWRPP

FINISH






3XUH:KLWH 5$/
Optional RAL Colors
Custom Color Match
Mill Finish (Aluminum Only)
Natural Anodized (Aluminum Only)

ACCESSORIES
 OPPOSED BLADE DAMPER
 OBD - ALUMINUM
 NO BORDER MOUNTING HOLES

5ZQJDBM4QFDJmDBUJPO%PVCMF%FnFDUJPO(SJMMFT
19mm Blade Spacing
%PVCMF EFnFDUJPO TVQQMZ HSJMMFT BOE SFHJTUFST TIBMM CF ,.$
.PEFM ,9 BMVNJOVN  TJOHMF EFnFDUJPO
 PS ,9 BMVNJOVN 
EPVCMFEFnFDUJPO
XJUINNCMBEFTQBDJOHBOEBTTDIFEVMFE
The grilles shall consist of an outer border or frame, with face
directional blades horizontal or vertical as detailed. Blades
shall be individually adjustable and designed to minimize noise
and pressure loss, and shall consist of an extruded aluminum
DMPTFEQSPmMF
Blades shall rotate smoothly without bending and include

a friction design to hold blade position, and prevent rattling.


Frame mounting holes shall be countersunk for oval head
screws, provided by the grille manufacturer (KMC).
Where scheduled and as shown, provide optional aluminum,
face operated opposed blade volume control dampers.
Finish shall be powder coated with RAL 9010 or custom color as
TQFDJmFECZUIF"SDIJUFDU

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

61

KX2
Grilles
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

62

www.kmcqatar.com

CIRCULAR DIFFUSERS - KCM

KCM
Air Diffusers
Circular Diffusers
Introduction
KMC Circular Diffusers have a circular cone
with elegant styling to provide maximum air
EJGGVTJPOFGmDJFODZ

Application
t Recommended for supply air, constant or
variable air volume heating, cooling, or
ventilating
t &GmDJFOU BJS EJTUSJCVUJPO JO DPPMJOH
applications at temperature differentials as
high as 16 C
t 360 air pattern delivery maintains horizontal
pattern with or without ceiling effect
t Expanding cone design provides excellent
horizontal air discharge preventing drafts in
the occupied zone

Product Features
t Removable inner cores permit easy
installation and access to duct
t Optional Volume control damper
t Powder Coated to RAL 9010 as standard
t Custom colors available on request

Selection Procedure
Selections can be made by means of a straight
read-off from the Performance Data for the
selected model.
t %FUFSNJOFUIFBJSWPMVNFnPXSBUFQFSPVUMFU
t Establish the required Throw (Refer Notes for
Throw Pattern)
t 4FMFDUUIFEJGGVTFSCBTFEPOSFRVJSFE"JSnPX
rate against the limiting pressure drop and
sound level requirements.

Product Selection Check List


t 4FMFDU6OJUTJ[FCBTFEPOTQFDJmFEJOMFUEJBNFUFS
t Select volume control accessory, it desired.
t Select Finish.

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

41

KCM
Air Diffusers
Performance Data

Notes :
t Neck velocity in m/s, meters per second
Test Standard
t ANSI / ASHRAE standard 70
t Isothermal conditions
t /POVOJGPSN BJS nPX JOUP EJGGVTFST JODSFBTF TPVOE MFWFMT 
operating pressures, and can distort the air distribution pattern
into the space
Sound Levels
t NC is noise criteria curve that will not be exceeded at the operating
point. This is determined by assuming a 10dB (ref: 10-12 watts)
room attenuation that is subtracted from the power levels in each
of the 2nd thru 7th octave bands

along the jet trajectory axis relating to terminal velocities of 0.75


m/s, 0.5 m/s & 0.25 m/s and include a surface effect
t Terminal velocity is the air speed, in meters per second, measured
in the supply air stream.
t For exposed duct installations, throws are 70% of the table
values above.
Pressure
t Ps represents static pressure, Pa
t Pt total pressure can be calculated by adding the Velocity
pressure and Static pressure (Ps), in Pa
t All pressures are stated and calculated in Pa

Throw
t The numbers shown are throw distances, in meters, measured

*In the interest of product development, KMC reserves the right to make changes without notice.

42

www.kmcqatar.com

KCM
Air Diffusers
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

43

EGG CRATE GRILLES - KECG

KECG
Grilles
Egg Crate Grilles
Introduction
KMC Return / Exhaust Grilles utilize core of
cubical grid and mostly used where maximum
free area is desired and see through is not
a concern.
These Grilles are typically used in ceiling
applications where see through sight lines
are minimized to directly below the grille.

Application
t Recommended for general return or exhaust
of room air
t High free area offering lowest sound and
pressure levels
t Egg Crate construction similar in
BQQFBSBODFUPNBOZMJHIUJOHmYUVSFT
t Surface mounted

Product Features
t 12.7mm x 12.7mm x 12.7mm aluminum core
t Aluminum frame
t Registers include a factory attached,
opposed blade volume control damper
t Powder coated to RAL 9010 as standard
t Maximum size one piece construction is
1200mm x 1200mm
t Larger sizes shipped in multiple sections for
mFMEBTTFNCMZ

Options
t Mounting holes in frame neatly countersunk
t Custom Colors

Selection Procedure
The selections can be made by means of a
straight read-off from the Performance Data
for the selected Model.
t %FUFSNJOFUIF"JSnPXSBUFQFSPVUMFU
t 4FMFDU UIF (SJMMF CBTFE PO SFRVJSFE "JS nPX
rate against the outlet velocity, limiting
pressure drop and sound level requirements.

Product Selection Check List


t Select Size (L x W) length based on desired performance characteristics.
t Select outlet type by Model Number.
t Select Finish.

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

67

KECG
Grilles
Performance Data

Notes :
Normal Size represents duct size
Test Standard
ANSI / ASHRAE standard 70

Pressure
Ps represents static pressure requirement. Total pressure can be
calculated as Pt = Ps + Pv
Pv is the air velocity pressure in the duct
All pressures are stated and calculated in Pa

Sound Levels
NC is noise criteria curve that will not be exceeded at the operating
point. This is determined by assuming a 10dB (ref: 10-12 watts) room
attenuation that is subtracted from the power levels in each of the
2nd thru 7th octave bands.

*In the interest of product development, KMC reserves the right to make changes without notice.

68

www.kmcqatar.com

KECG
Grilles
Egg Crate Grilles

MODEL

HEIGHT

WIDTH

PPWRPP

PPWRPP

19mm Blade Spacing


 KECG - Surface Mounted
 KECG-C - Core Only

FINISH






3XUH:KLWH 5$/
Optional RAL Colors
Custom Color Match
Mill Finish (Aluminum Only)
Natural Anodized (Aluminum Only)

ACCESSORIES
 Ob - Opposed Blade Damper
 Aluminum
 No Border Mounting Holes
 Fly/ Insert Screen

5ZQJDBM4QFDJmDBUJPO&HH$SBUF(SJMMFT (SJE$PSF

The return grilles shall be model KECG by KMC and shall


integrate with the ceiling style as scheduled. The core shall be
an aluminum grid consisting of a 12.7 mm x 12.7 mm x 12.7 mm
cells, and shall have a minimum free area of 90%.
For surface mounting applications, the border shall be extruded
aluminum, and shall include countersunk screw holes for
installation.

Finish shall be powder coated with RAL 9010 or custom color as


TQFDJmFECZUIF"SDIJUFDU
Provide optional aluminum opposed blade volume control
dampers as scheduled.
Dampers shall be adjustable through the face of the register.

Lay-in models shall include extension panels where required for


the scheduled duct size and grid system module size.

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

69

KECG
Grilles
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

70

www.kmcqatar.com

DOOR GRILLES - XNSA

XNSA
Grilles
Door Grilles
Introduction
KMC air transfer Grilles or Door grilles are typically
VTFEJOEPPSTBOEQBSUJUJPOTUPBMMPXBJSnPXUP
a space that is not directly served by a ducted
source of supply air or a ducted outlet for return
or exhaust air.
These Door / Wall Grilles offers the largest free area
possible with a completely sight proof or light proof
core.
The inverted vee louver cross section not
only blocks vision, but also provides stiffness.
Being mounted in the lower portion of a door, a
door grille is by nature subjected to knocks and
bumps. Durability of KMC louvers assures good
looks even after long service.

Application
t The door/wall Grille XNSA is suitable for
transfer of air from one room into the other.
t The Grille can be either mounted to the wall
or the door.
t The horizontal V shape vanes are not
adjustable and are sight proof
t Supplies straight 0 jet air patterns for
extremely long throw requirements and
diffused air patterns up to 30 spread for
installations which require shorter throws
and greater air diffusion patterns
t Vertical direction is adjustable from 0 to 30

Product Features
t All grilles are provided with a seal on the
back of the frame in order that the perimeter
in contact is airtight.
t Free Area 60%

Options
t Frame & Blades from high quality extruded
BMVNJOVNQSPmMFTo"MMPZ5
t 37mm Frame & Flange width
t Blades are inverted V horizontal cross
section louvers arranged to overlap each other
t The frame of the transfer Grille consists of two
QBSUT  POF mYFE  IPMEJOH UIF DPSF
 XIJMF UIF
other part is of the sliding type which is then
mYFEUPUIFPUIFSTJEFPGUIFQBSUJUJPO PSEPPS

t Available in a wide variety of sizes from


200mm x 200mm up to 600mm x 600mm
t Other sizes available on request

Selection Procedure
The selections can be made by means of a
straight read-off from the Performance Data
for the selected Model.
t %FUFSNJOFUIF"JSnPXSBUFQFSPVUMFU

Product Selection Check List


t Select Size (L x W) length based on desired performance characteristics.
t Select Finish

t 4FMFDU UIF (SJMMF CBTFE PO SFRVJSFE "JS nPX


rate against the outlet velocity and limiting
pressure drop.

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

71

XNSA
Grilles
Performance Data

*In the interest of product development, KMC reserves the right to make changes without notice.

72

www.kmcqatar.com

XNSA
Grilles
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

73

LINEAR BAR GRILLES - LBG

LBG
Grilles
Linear Bar Grilles
Introduction
KMC Linear Bar Grilles are designed to have
DPNCJOFECFOFmUTPGBSDIJUFDUVSBMCFBVUZXJUI
performance versatility. These Grilles are an
excellent choice for applications where they are
FYQPTFEBOEBDDFTTJCMFUPIFBWZUSBGmD
8JUI mYFE CBS QSPmMFT QBSBMMFM UP UIF MPOH
dimension , the linear bar grilles are rugged in
DPOTUSVDUJPO BOE B mYFE BJS QBUUFSO FGGFDUJWFMZ
limit any potential for unauthorized tampering.

Application
t Recommended for heating, cooling, or
general ventilation applications
t Supply or return air systems
t Sill installation blankets glass or outer walls.
t High sidewall installation gives horizontal
spread.
t Ceiling installed models are available with
welded-in cores.

Bar Thickness & Spacing

PPZLGHEDUVRQ
PPFHQWHUV

Border type

&RUH'HHFWLRQ
0







/%*

/%*

/%*

Core Only

/%*

/%*

/%*

Product Features
t Heavy
gauge,
extruded
aluminum
construction
t Removable core separates from its frame
no need for a frame in a frame or subframe assembly. Easy accessibility to ducts
for servicing or cleaning purposes, or for air
nPXBEKVTUNFOU
t Airline models include 6mm wide bars on
12mm centers (Model LBG)
t $PSF EFnFDUJPO BOHMFT PG     PS  GPS
precise directional control of supply air or
return air use.
t Fastening methods include visible border
screws, or concealed mounting options.
t 1PXEFSDPBUFEUP3"-mOJTIPSOBUVSBM
anodize.
t Lengths to 2500mm for full sections.
t Unlimited length continuous runs (2500mm
max sections) using frame alignment strips.
t Heights from 50mm to 450mm (with
removable core).
t Welded-in core construction on heights over
450mm (cores non-removable).
t 'SBNF MFTT DPOTUSVDUJPO UP TVJUF mFME
requirements.

Grille Options
t Aluminum opposed blade volume control
dampers minimum 100mm height.
t Custom colors
t Mitered corners
t Blank off Panels

6.4mm Wide Bars on 12.7mm


Centers

Product Selection Check List


t Select Unit size based on desired performance characteristics.
t Select outlet type by Model No. (Blade angle core style).
t Select fastening type (face / concealed)
t Select damper, if desired
t Select Finish

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

45

LBG
Grilles
Performance Data

LBG-1 - 0 DEFLECTION

Note:
Data based on 1200 mm active length. For other active lengths, use the following
adjustment factors :

*In the interest of product development, KMC reserves the right to make changes without notice.

46

www.kmcqatar.com

LBG
Grilles
Performance Data

-#(%FnFDUJPO

Note:
Data based on 1200 mm active length. For other active lengths, use the following
adjustment factors :

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

47

LBG
Grilles
Performance Data

-#(%FnFDUJPO

Note:
Data Based on 1800mm active length. For other active lengths, use following
adjustment factors:

*In the interest of product development, KMC reserves the right to make changes without notice.

48

www.kmcqatar.com

LBG
Grilles
Performance Data
Test Standard
t ANSI / ASHRAE standard 70
t Isothermal air
Throw
t The numbers shown are throw distances, in meter, measured
along the jet trajectory axis relating to terminal velocities of 0.75,
0.5 & 0.25 m/s, with the jet attached to the ceiling surface. For
exposed duct installation with free, unattached jet, multiple
sidewall throw distance in table x .70
t Sill / Floor throw values are the sum of the vertical and horizontal
distance the jet travels up an adjacent surface and across the
ceiling. This is an attached jet with a surface effect.
t Terminal velocity is the air speed, in meter per second, measured
in the supply air stream.

Sound Levels
t NC shown is the noise criteria curve that will not be exceeded at
the operating point. This is determined by assuming a 10dB (ref:
10-12 watts) room attenuation that is subtracted from the power
levels in each of the 2nd thru 7th octave bands.
t When used with opposed blade volume control damper (OBD),
add +5 NC to value shown for full open damper, and increase
pressure by 1.2
Core Velocity
t Meter per second (m/s)
Pressure
t Ps represents static pressure, Pascal (Pa)
Return Use
t Add +5 NC and multiply Ps x 1.20

5ZQJDBM4QFDJmDBUJPO
Aluminum linear bar grilles / registers shall be model LBG (6.35 mm
wide bars) by KMC. The grilles shall consist of an outer border or
GSBNF BOEDPSFDPOmHVSBUJPOBTTDIFEVMFE$PSFCBSTTIBMMCF
NNXJEF mYFENNDFOUFST XJUIB  PSEFHSFFEFnFDUJPO
angle.
Grille lengths shall be provided up to 2500mm as a single assembly
without joints, and up to 200 mm in height as a single core. Longer
continuous runs shall be constructed from multiple units, and
aligned with alignment hardware from the grille manufacturer (KMC).

or using auxiliary frames are not acceptable. Floor units shall use
CPSEFST ') PS '( EFTJHOFE GPS GPPU USBGmD BOE TIBMM JODMVEF nPPS
reinforcement no more than 125mm centers. Cores shall be 6.35mm
wide bars on 12.7mm centers.
Where scheduled and as shown, provide mitered corners or joints.
Include all accessories required including opposed blade dampers,
CMBOLPGGT PSFRVBMJ[JOHEFnFDUPST
Finish shall be powder coated with RAL 9010 as standard and natural
anodize or any other custom requirement shall be an optional.

Cores shall be constructed from extruded aluminum, and shall be


removable from the outer frame for cleaning, access, and servicing.
Designs utilizing a non-removable swaged core/frame assembly,

*In the interest of product development, KMC reserves the right to make changes without notice.

www.kmcqatar.com

49

LBG
Grilles
Notes

*In the interest of product development, KMC reserves the right to make changes without notice.

50

www.kmcqatar.com

COUNTRY OF ORIGIN

CERTIFICATE OF ORIGIN
Project Name

UDC OFFICE AT ABRAJ QUARTIER

CONSULTANT

M/s UDC

MAIN Contractor

M/s BLUU

MEP Contractor

M/s MECHATRONICS

TO WHOM SO EVER IT MAY CONCERN


This is to certify that all materials proposed for the UDC OFFICE AT ABRAJ QUARTIER Package (referred
below) by M/s. Khalid Manufacturing Company (KMC), are manufactured at our facility in the Industrial
Area, Doha, Qatar and in accordance with the standards set-forth and as represented in KMC Standard
Quality Assurance Program respectively.

Products

1. Grilles, Registers & Diffusers Units Products KMC, Qatar

Thanking You,
For Khalid Manufacturing Company

(Director - Sales & Marketing)

CERTIFICATES

ISO CERTIFICATE

WARRANTY CERTIFICATE

There is no implied warranty of merchantability or fitness for a particular purpose. There is no other warranty, expressed or
implied, except such as is expressly set forth herein. Seller will not be liable for any consequential or special damages for any
breach of warranty or any damages for negligence or for the cost of removal, transportation or reinstallation of defective or
replacement goods. Sellers liability and purchasers exclusive remedy shall be expressly limited to the repair of defective goods,
or the shipment of equivalent goods F.O.B. the shipping point indicated on the face hereof, or the repayment of the purchase
price upon return of the goods to seller with sellers approval, or the granting of a reasonable allowance on account of any
defects, as seller in its sole discretion may elect.

Seller makes no warranty whatsoever with respect to products, accessories or parts furnished by seller but not manufactured
by seller. Such products, accessories or parts will carry only the warranty, if any, of the manufacturer thereof, and seller
hereby assigns to purchaser all of its rights and interest in the warranties, if any provided by the manufacturers of such
products, accessories and parts to the extent that this assignment is not prohibited by the terms of any agreement between
seller and the said manufacturers.

Unless otherwise expressly provided on the face hereof, and in lieu of all other warranties, expressed or implied, seller
warrants only that the goods covered hereby will conform to the description on the face hereof, that seller will convey
good title thereto, free from any lien or encumbrance, and that said goods will be free from defects in material and
workmanship under normal use and service and provided said goods have not been repaired, altered or neglected and have
been held in normal indoor storage prior to installation. Any claim on account of defective goods or for any other cause
whatsoever will conclusively be deemed waived by purchaser unless writ- ten notice thereof is given to seller within 12
months of shipment of the goods to which such claim relates. Seller will be given reasonable opportunity to investigate all
claims, and no goods or parts thereof may be returned by purchaser to seller until after receipt by purchaser of definite
shipping instructions from seller. Goods so returned will b e repaired o r replaced without charge. Seller s hall reserve the
exclusive right to assign factory representatives in the repair or modification of goods supplied herein.

CR COPY

PROJECT REFERENCE LISTS

Overseas Bechtel Inc.

Qatari Engineer &


Associates

Qatar Petroleum

NDIA - Passenger Terminal Complex - Qatar

The Construction of Horse Owner's Complex


@ Al Khor - Qatar

MULTIPURPOSE ADMIN. COMPLEX PHASE1, RAS LAFFAN - Qatar

Viva Bahriya Plot 22 & 23 - Qatar

1 of 5

KEO Consultant

Sidra Medical Hospital & Research Center Qatar

KEO Consultant

Hyder Consulting

Doha Convention Center & Tower - Qatar

Halcrow

CONSULTANT

Lusail Development - CP-1 - Qatar

PROJECT NAME

S.N.

The Pearl

Qatar Petroleum

Qatar Olympic
Committee

NDIA

Qatar Petroleum

Qatari Diar

Qatari Diar

CLIENT

Sound Attenuators

Consolidated Contractor Group


S.A.L (Offshore) & Teyseer JV /
Drake & Scull Qatar
Man Enterprises / Metrix Qatar

VAV Units
Grilles & Diffusers

Al Alia Trading & Contracting


Co. WLL

Grilles & Diffusers


Sound Attenuators
Fire Dampers
Motorized Fire Dampers
VAV Units
Access Doors

Sky Oryx Venture

VAV Units
Grilles & Diffusers

Six Construct / Midmac Contg


Co. JV / ETA & DEBBAS JV
OHL / CONTRAK JV / Voltas
Limited

Sound Attenuators
Jet Nozzle / Drum Louvers

Synohydro Corp.

PRODUCTS
Sound Attenuators
Fire Dampers
Motorized Fire Dampers
Louvers

MAIN / MEP CONTRACTOR

Doors, Grilles, Diffusers, VAV units, Sound Attenuators & Louvers)

( Products: Fire Dampers, Combination Fire & Smoke Dampers, Smoke Dampers, Volume Control Dampers, Access

KHALID MANUFACTURING COMPANY - PROJECT REFERENCE LIST

Dar Al Handasah
Shair and Partners

AEB

DARA Engineering

KEO Consultant

Qatari Engineer &


Associates

Supreme Command Building at Barzan Camp


Phase 5 - Qatar

Construction of New Ten Kindergarten Package 5 - Qatar

Commercial Development @ Al Nasser Qatar

Porto Arabia Tower - Qatar

The Construction of Horse Owner's Complex


@ Al Khor - Qatar

10

11

12

13

2 of 5

Sheikh Khalid Bin


Hamad Al Thani

James Cubitt &


Partners Engineering
Consultancy

Al Nour Residential Tower at Al Dafna - Qatar

Qatar Olympic
Committee

The Land / Al Arrab

Al Merqab Real
Estate

ASHGHAL (Public
Works Authority)

Private Engineering
Office

Qatar Petroleum

Qatar Petroleum

EPIC for Field Support Workshops,


Warehouses and Offices at QPSFA in Dukhan
- Qatar

CLIENT

CONSULTANT

PROJECT NAME

S.N.

Al Alia Trading & Contracting


Co. WLL

Trivalley-Ligmets

Terna Qatar / ERE Contracting

Sound Attenuators
Fire Dampers
Motorized Fire Dampers
Louvers

Sound Attenuators
VAV Units

Sound Attenuators

Sound Attenuators
Grilles & Diffusers

Sound Attenuators
Fire Dampers
Motorized Fire Dampers
Grilles & Diffusers

Al Balagh Trading & Contracting


Co. WLL / Al Tamez Middle East
WLL / Multi-Energy Qatar Ltd.

ITCC / MARC

Fire Dampers
Motorized Fire Dampers

Sound Attenuators
Fire Dampers
Motorized Fire Dampers
Grilles & Diffusers

PRODUCTS

Orientals Enterprises LLC /


Electro Mechanical Engineering
Co. WLL

Al Alia Trading & Contracting


Co. WLL

MAIN / MEP CONTRACTOR

Doors, Grilles, Diffusers, VAV units, Sound Attenuators & Louvers)

( Products: Fire Dampers, Combination Fire & Smoke Dampers, Smoke Dampers, Volume Control Dampers, Access

KHALID MANUFACTURING COMPANY - PROJECT REFERENCE LIST

Qatar Petroleum

CEG

Qatari Engineer &


Associates

Projacs International

James Cubitt &


Partners

Epic of HV ( 33kV ) Network Upgrade in


Dukhan - Qatar

Ministry of Interior Headquarter - Qatar

GMP ( Cell Therapy ) Laboratory @ Al Amal Qatar

West/East Expansion of Aspetar - Qatar

Masjid for H.E. Ghanem Bin Saad Al Saad Qatar

EBJAJ Ship Repair Yard - Qatar

14

15

16

17

18

19

20

3 of 5

Qatar Petroleum

Construction of New Project Office, Drawing


Offfice & Central Documentation Library @
Dukhan - Qatar

Royal Haskoning

CONSULTANT

PROJECT NAME

S.N.

Qatar Petroleum

H.E. Ghanem Bin


Saad Al Saad

Aspire Logistics

Hamad Medical
Corp.

MOI

Qatar Petroleum

Qatar Petroleum

CLIENT

Sound Attenuators
Grilles
Diffusers
Sound Attenuators
Grilles
Diffusers
Motorized Dampers.

Marbu Qatar / Mechel


Engineering WLL

Gulf Contracting Co. / How


United Services WLL

SEG Qatar / Mechel Engineering


WLL

Sound Attenuators
Volume Control Dampers
Motorized Volume Control
Dampers
Sound Attenuators
Grilles
Diffusers
VAV Units

Sound Attenuators
Volume Control Dampers
Motorized Volume Control
Dampers

WCT / Transgulf
Electromechanical WLL

Tadmur Trading WLL / Takyeef


Electromechanical

Sound Attenuators

Sound Attenuators
Grilles
Diffusers
VAV Units

PRODUCTS

Al Mana Engineering & Contg


Co. / NECC

Al Mana Engineering & Contg


Co. / NECC

MAIN / MEP CONTRACTOR

Doors, Grilles, Diffusers, VAV units, Sound Attenuators & Louvers)

( Products: Fire Dampers, Combination Fire & Smoke Dampers, Smoke Dampers, Volume Control Dampers, Access

KHALID MANUFACTURING COMPANY - PROJECT REFERENCE LIST

AEB

Construction of Ghanem Holdings Office


Building - Qatar

Residential ( G+3) for ALI DARWESH - Qatar

Early Chilhood Care Center - Qatar

Majilis Oman - Oman

Royal Opera House - Oman

Armani Hotel, Burj Khalifa - Dubai UAE

Royal Cavalry at Safinat - Oman

21

22

23

24

25

26

27

28

4 of 5

United Consultants

Extension to Existing Arabic Channel Building Qatar

RCA

RCA

RCA

RCA

QF Engineers

EHAF

CONSULTANT

PROJECT NAME

S.N.

VAV Units

VAV Units

Grilles & Diffusers

Grilles & Diffusers


VAV units

Grilles & Diffusers

Grilles & Diffusers

Shanon Trading / Takyeef


Electromechanical
Al Doha Maintenance &
Services
IRACO / Bahwan Engineering
Co.

IRACO / Bahwan Engineering


Co.
IRACO / Bahwan Engineering
Co.
IRACO / Bahwan Engineering
Co.

Early Chilhood Care


Center

RCA

RCA

RCA

RCA

Sheikh Ghanem Al
Thani

Mr. Ali Darwesh

Sound Attenuators
VAV Units
Grille
Diffusers

PRODUCTS

Volume Control Dampers


Motorized Volume Control
Dampers
Louvers

Galfar Al Misnad Engineering &


Contracting WLL / Al Tamez

MAIN / MEP CONTRACTOR

RAMCO Trading & Contractor


Co.

Al Jazeera Satellite
Network

CLIENT

Doors, Grilles, Diffusers, VAV units, Sound Attenuators & Louvers)

( Products: Fire Dampers, Combination Fire & Smoke Dampers, Smoke Dampers, Volume Control Dampers, Access

KHALID MANUFACTURING COMPANY - PROJECT REFERENCE LIST

Transport Complex @ Seeb - Oman

Bait Al Barakah - Oman

New RCA Office Ghubara - Oman

29

30

31

5 of 5

PROJECT NAME

S.N.

RCA

RCA

RCA

CONSULTANT

RCA

RCA

RCA

CLIENT

PRODUCTS

Grilles & Diffusers


Louvers

Grilles & Diffusers

Grilles & Diffusers


VAV units

MAIN / MEP CONTRACTOR

IRACO / Bahwan Engineering


Co.

IRACO / Bahwan Engineering


Co.
IRACO / Bahwan Engineering
Co.

Doors, Grilles, Diffusers, VAV units, Sound Attenuators & Louvers)

( Products: Fire Dampers, Combination Fire & Smoke Dampers, Smoke Dampers, Volume Control Dampers, Access

KHALID MANUFACTURING COMPANY - PROJECT REFERENCE LIST

PROJECT APPROVALS

You might also like