Professional Documents
Culture Documents
PARKCOAT
High-reflective coating for the interior of
parking structures
Description
High-reflective coating for the interior of parking structures.
Primary uses
Parking structures
Concrete
Brick
Stucco
Block
Primed wood or metal
Interior ceilings and vertical surfaces, including walls,
beams, and columns
Typical properties*
Property
Density
Solids by weight
Solids by volume
Viscosity @ 25C
pH
Reflectance
Water based
VOC compliant
High light reflectivity
No dirt pickup
Benefits
No dirt pick-up
Low odour
Environmentally friendly
Enhances the security of garages
An economical alternative to additional lighting
Maintains attractive appearance
Low labor and material cost
Gets structure back in service quickly
Good resistance to carbonation
Packaging
SONOSHIELD PARKCOAT is available in 18.93 litre pails
and 208 litre drums on special order only.
Shelf life is 1 year when stored in unopened containers
under nor-mal conditions. Protect PARKCOAT from freezing
in the container; do not store below 2C.
Color
Bright White
Test Method
ASTM D 1475
ASTM D 2369
ASTM D 5201
ASTM D 562
Test data
Property
Tensile Strength, ASTM D 412
Elongation at break, ASTM D 412
Water vapor perms, dry, ASTM D 1653
Features
Value
1.27kg/litre
51.4%
44.8%
122 - 131 KU
8.8 - 9.3
88%
Result
567 psi
35%
2.1
Application
Surface preparation:
1. Concrete must be fully cured (28 days), structurally
sound, clean and sound.
2. Mildew and fungus must be completely removed before
the application of PARKCOAT. Wash surfaces
vigorously with a solution of 0.125 litres of detergent and
0.25 litres of liquid bleach in 3.785 litres of water. Rinse
thoroughly with clean water.
Precautions
KEEP OUT OF THE REACH OF CHILDREN. Avoid contact
with eyes, skin and clothing. Use with adequate ventilation.
DO NOT take internally. Wash thoroughly after handling.
Use impervious gloves, eye protection and if the TLV is
exceeded or if used in a poorly ventilated area, use
NIOSH/MSHA approved respiratory protection in
accordance with federal, state and local regulations. Keep
container closed when not in use.
First aid
Eye contact, flush thoroughly with water for at least 15
minutes. SEEK MEDICAL ATTENTION. In case of skin
contact, wash affected areas with soap and water. If
irritation persists, SEEK MEDICAL ATTENTION. If
inhalation causes physical discomfort, remove to fresh air. If
discomfort persists or any breathing difficulty occurs, or if
swallowed, SEEK IMMEDIATE MEDICAL ATTENTION.
Refer to Material Safety Data Sheet (MSDS) for further
information.
VOC content
75 g/L or 0.62 lbs/gal less water and exempt solvents.
06/2000 Degussa-UAE revised 11/2004
* Properties listed are only for guidance and are not a guarantee of
performance.
Coverage (total)
Concrete (precast and cast in place): 0.25-0.3 litres / m
Concrete block, brick, or stucco: 0.25-0.4 litres / m
Coverage rates will vary with the texture and porosity of the
substrate. Test applications or actual job-site substrate
samples will determine the actual rate.
Caution
PARKCOAT contains propylene glycol, calcium carbonate,
titanium dioxide, kaolin clay, zinc oxide, silicon dioxide.
Risks
May cause eye, skin or respiratory irritation. Ingestion may
cause irritation. INTENTIONAL MISUSE BY
DELIBERATELY IN HALING THE CON-TENTS MAY BE
HARMFUL OR FATAL.
www.degussa-cc.ae
e-mail: marketingcc.mideast@degussa.com
Certificate No.
963680
As all Degussa technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
Certificate No.
945787
Certificate No.
772556