Professional Documents
Culture Documents
DISADVANTAGES
1. As the copper strips are very thin they can carry little
hence PCB cannot be used
For heavy currents, because in that case the strips will
be heated and can cause problem.
2. Soldering need precautions as the risk of strips being
over heated and destroyed
is always there.
3. For big circuits, PCB cannot be used because it cannot
carry heavy components
the case and size of PCB in that case will be in tolerate.
CHARACTERSTICS OF PCB
MATERIAL:-
ELECTRICAL CHARACTERISTICS:
Insulation resistance
Dielectric strength
Dielectric loss
Dielectric constant
PHYSICAL CHARACTERSTICS:
Flexural strength
Water absorption
Wrap and theist
Punchabilty
Non inflammability or flame resistant.
SURFACE TREATMENT OF PCB
1. GREEN MASKING:
A mask of some green
lacquer is provided on the whole copper tracts except
the solder point. This has following advantages:
PCB FABRICATION
Precautions
In electronics
circuits. For a secure electrical and mechanical joints between
wires and components, nothing has replaced it, or is lightly to
in the foreseeable future, as an electronic technician, you will
need to know how to solder and do it well solder a liquid
bond.
SOLDER CONNECTION:
DESOLDERING: