Professional Documents
Culture Documents
Paper II
1. A new piece of tube cut 10% longer for
3. As in2 &provide protection to the thread cut into casting made of soft metal
4. As in 3 & to be installed in the field when thread in casting are stripped out
5. Chief reason for replacement of cupper tubing by aluminum alloy or CRS tubing is due to
1. Low fatigue factor of copper tube. 2. High fatigue factor of copper tube
1. Crew, Fuel, Passenger, and cargo. 2. Crew, fuel, oil, and fixed equipments
8. In the theory of weight & balance what is the name of distance from the fulcrum to an object
1. Adding the gross weight on each weighing points and multiplying by the measured distance
to the datum.
2. Adding the net weight of each weighing point and multiplying the measured distance to the datum
3. Subtracting the tare weight from the scale reading and adding the weight of each weighing point
Page
4. Multiplying the measure distance from each weighing point to the datum times the sum of scale
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
10. When dealing with weight and balance of an a/c, the term maximum weight is interpreted to mean
the minimum
1. Weight of the empty a/c. 2. Weight of the useful load. 3. Authorised weight of a/c and its
contents
4. Weight of all optional or special equipment that can be installed in the a/c.
11. The most important reason for a/c weight and balance control in today a/c is
12. The amount of fuel for computing empty weight and corresponding CG is
1. Empty fuel tanks. 2. Unuseable fuel. 3. Full fuel tanks. 4. The amount of fuel
necessary for an hour of operation.
2(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. High heat value, high volatility. 2. High heat value, low volatility.
3. Low heat value, high volatility. 4. Low heat value, low volatility.
17. Alodizing is a chemical treatment for aluminum alloy to improve their paint bonding quality and to
18. A chemical treatment to ferrous metal which convert the surface to non metallic oil absorptive
phosphate
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
22. The maximum distance between end fittings to which a straight hose assembly is to be connected is 50
inches .The minimum hose length to make such a connection should be
23. A scratch or nick in aluminum alloy tubing can be repaired by burnishing provided the scratch or nick does
not
3. Exceed 20% of the wall thickness of the tube. 4. Exceed 10 % of the tube dia.
3(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
24. If too much time is allowed to elapse during the transfer of 2017 & 2024 aluminums alloy
from the heat treatment medium to the quench tank ,it may result in
1. Forms a hard case on apart to resist wear. 2. Decrease the size of the grain structure
3. Toughens steel to increase its tensile strength. 4. Increase bearing heat resistance
27. Aircraft bolts with across or asterisk marked on the bolt head are
28. A fiber type self locking nut must never be used on an a/c if the bolt is
29. What is used to remove corrosion from highly stressed steel surface
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
30. The interior surface of sealed structural steel tubing is best protected against corrosion by
1. Purging the interior with dry air before sealing. 2. A coating of hot linseed oil.
1. Load in kilogram divided by area of the spherical surface of the impression in square inch.
2. Load in pound divided by area of the spherical surface of the impression in square inch.
3. Load in kilogram divided by the area of the spherical surface of the impression in square mm.
4. Load in pounds multiplied by the area of the spherical surface of the impression in millimeter.
1.O. 2. A. 3. H. 4.T.
1. Pure aluminum coated with an aluminum alloy. 2. Aluminum alloy coated with pure
aluminum.
3. Pure aluminum coated with magnesium alloy. 4. Magnesium alloy coated with pure aluminum.
38. While tempering the hardened chisel, the colour of the cutting edge at which it is to be dipped in water
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Blind rivet. 2. Self plugging. 3. Mechanical lock rivet. 4. None of the above.
1. Lock washer. 2. Shake proof washer. 3. Ball socket & seat washer. 4. Plain washer
3. Clean cable with wet cloth. 4. Cable should be cleaned with dry cloth.
3. As in 2 and the length of the stud is the distance from the head of the stud to the bottom of
1. Swaged fittings. 2. Socket, nut & nipple. 3. Beaded end fitting. 4. All are correct.
53. Which type of rubber is an excellent material to used with phosphate ester based hydraulic fluid
(skydrol)
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
56. Which nut should not be used when temp is more than 2500C
1. Elastic stop nut. 2. Sheet spring nut. 3. Boots self locking nut.
6(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3. As in (2) and tap is bent upwards. 4. As in (3) and tab is bent downwards.
3. As in (1) and designed in 3 head style. 4. As in (2) and designed in 3 head style.
4. None.
1. NAS 143 & 143C. 2. MS 20002 & MS 20002C. 3. Both 1 and 2 are correct.
63. The bolt head is marked with either recessed or raised triangle, the bolt is
1. NAS close tolerance bolt. 2. Close tolerance bolt. 3. Std bolt. 4.CAS bolt.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Face the pressure. 2. Away from the pressure. 3. Anyway can be put.
3. As in (2) also prevents dirt entering the system. 4. As in (3) & made of Neoprene.
68. What is to be used to clean surfaces oil, hyd fluid, grease from a/c tyre
7(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
69. MS 20470 is a
1. Flat head rivet. 2. CSK head rivets. 3. Brazier head. 4. Universal head rivets.
70. If a rivets is marked with recessed double dots on its head, the rivets is
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
77. AN 545 is a
1. Machine screw nut. 2. Slotted engine nut. 3. Wing nut. 4. Shear castle nut.
78. Type of rivet to be installed on an aerodynamically smooth surface or if clearance of an assembly is needed
1. Are to be left unpainted. 2. As in (1) & require no anodic treatment. 3. Both statements
are wrong.
8(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. Heavy duty cleaner. 2. Light duty cleaner. 3. Medium duty cleaner. 4. All the above.
PAPER-II (SET-1)
1. Al alloy bolts smaller than mm are not used in the primary structure
2. Al alloy bolts & nuts may be used where they will be separately removed for maintenance purpose
2. AN 3 DD H 5 indicates that
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Flat head
2. CSK head
3. Both a & b
5. Grub screw is
1. A locking device
3. By rolling on dial
2. An infinite no of times
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
9. Jo-bolt is
1. Top or rearward
2. Bottom or forward
10(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3. Top or forward
11. Turnbuckle :
1.Cd-plated C steel(LCS)
2.CRS
3.Stainless steel
1.Cu alloys
2.Mg alloys
3.Teflon
2.These markers identify each lines function , contents & primary hazards
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
15.PHDAN indicates
16.Power is related to
1.Force
2.Distance
1.Charles lav
2.Pascals law
3.Boyles law
4.Newtons law
1.45*
2.54*
3.27*
4.29*
19.Octal of 189 is
1.225
2.15
3.265
4.275
1.Surface gage
Page
2.Feeler gage
3.Micrometer
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.Dial indicator
4.None
22.Colour of corrosion is
1.Green on Cu alloys
2.Red on Mg alloys
23.1 HP is
4.1000 watts
1.Al alloys
2.Cu alloys
3.Titanium
4.Steel
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Methyl chloride
2.Carbon dioxide
3.Foam
4.Water
28.Tempering is done
1. Al
2.Mg
3.Stainless steel
4.Both
1.Red line
4.Gren line
1.Voltage range
2.Penetrating power
3.Exposure distance
4.exposure angle
1.Resistance to penetration
2.depth of impression
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Dia. of impression
33.Red Brass is
34.Corrosion on Titanium is
1.easy to detect
2.difficult to detect
14(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4.as in (2) & show deterioration from presence of salt deposit & metal impurities particularly at high
temperatue
35.Metallizing is
3.Spraying of coat of pure Al on steel parts with Oxyacetylene flame & compressed air
1.Increased dimension
2.Resistance to corrosion
37.Universal gate is
1.AND & OR
1.Building up a part
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
39.Intergranulaar corrosion
2.as in (1) & in its most severe form it causes the layer to exfoliate
1.Butt welding
15(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Spot welding
1.water only
2.Boric acid
44.Hacksaw having first tooth serrated to left,second to right & third is at middle for the purpose of
1.clearance
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2.ripsaw
3.threading
4.none
1.Hardness
2.tensile strength
3.elastic limit
1.Copper
16(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2.Chromel
3.Manganese
4.Alumel
1.Red line
2.Green line
3.White line
4.none
1.diode
2.transistor
3.resistor
3.No resistance
1.No.of poles
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2.rpm
4.none
51.Transformer
3.as in (2) & its consists of 2 coils which are not elcectrically connected but are arranged such that
4.as in (3) & cores are laminated to prevent eddy current losses
1.black
2.Yellow
3.blue
4.none
1. 100101
2. 111000
3.100111
4. 110011
1. Span /Chord
2. Span/LE
3. Span /Area
4. None
4. Both a & c
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. NI-Cd
2. Carbon Zinc
3. Silver zinc
4. Lead acid
1. 90*
2. 30*
3. 45*
4. 60*
58. MODEM is a
18(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. Part of cpu
2. Input
3. Output
4. npne
1. A fuel jettision system must be able to jettision fuel within 10 minutesfor general aviation
3. Fuel jettisiong must be stopped with with a minute of fuel for 45 minutesof cruise at max continious
power fore reciprocating engine
1. Lap weld
2. Butt weld
3. Spot weld
4. None
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. jet washer
3. Instrument application
3. Ease of manufacture
19(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4. None
4. None
1.61
2. 53
3. 63
4 51
1.Extrusion
2. Forging
4. Machinig
1. high accuracy
Page
2. medium accuracy
3. low accuracy
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4. none
1.OD
2. ID
3. Both 1 & 2
1. thermocouple
2. thermistor
3. both a & b
2. both a & b
4. none
1. Lenzs law
2. Self induction
3. Mutual induction
4. None
1. clad
2. Cylinder
3. Crankshaft
1. Nickle hidrooxide
2. Calcium hydroxide
3. potassium hydroxide
4. None
Page
1. Balance tab
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2. Trim tab
3. Servo tab
4. None
1. External threading
2. internal threading
1. Al
2. Mg
3. stainless steel
2. raker
3. ripsaw
4. none
1. 2
2. 3
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.6
4.9
1. Nickle plating
3. Passivation
4. None
1. Locking purpose
4. None
1. gear ratio
2. Mean
3. Module
4. DP
85. A 3 phase winding rotate with 1800 rpm in magnetic field having 8 pole,it frequency is
1. 400
2. 800
3. 1200
4. 1800
86. Co efficient B is calculated by taking half the algebric difference between the deviation on compass
heading
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Zero
2. Lagging
3. Unity
4. Leading
1. Plate thickness
23(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2. Plate area
3. Plate separation
4. Nature of dielectric
1.One
2. Two
3. Three
4. Any number
1. Forward biased
2. Reverse biased
3. Lightly doped
4. All
4. None
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2. Maintenance manual
24(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3. Flight manual
1. File
2. Emery paper
3. Oversize drill
4. Countersank reamer
1. Air
2. Furnace
3. Mica
4. Both 2 & 3
1. Zero
2. Unity
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3. Lagging
4. Leading
1. Thermistor
2. Transistor
3. Conductor
4. Insulator
4. None
PAPER II (SET B)
1.For normal operation of the transistor,the collector diode has
1.Forward bias
2.Reverse bias
3.Non-conducting
2.The common grade of file used to give good finish quickly and has about
1.Rough
2.Bastard
3.Second cut
4.Smooth
1.Drilling
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2.Filing
3.Screwing
4.Tenning
4.The property where by a metal can be drawn out into a wire without cracking is known as
1.Fusibility
2.Plasticity
3.Ductility
4.Tenacity
1.Dilute H2SO4
26(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2.Concentrated H2SO4
3.KOH
4.Unaffected
1.Saturated
2.Cut-off
3.Destroyed
4.None
1.Brown
2.Black
3.Grey
4.Reddish brown
1. 0.001
2. 0.01 mm
3. 0.02 mm
4. 1.00 mm
Page
1. 0.75% to 1.5%
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2.0.25 % to 0.75%
3. 0.25 % to 1.5 %
4. upto 0.25 %
1. 19
2.7
3.15
4.101
11.Junction diode is
1.Bipolar device
27(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Unipolar device
1.Converter
2.Inverter
3.Rectifier
4.Amplifier
1. 10110 base 2
2.11010 base 2
3.10111 base 2
4.11001 base 2
1.5.75
2.6.75
3.3.5
4.9.75
Page
1.Memory unit
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Control unit
4.Output section
1.Normal extinguisher
3.Foam extinguisher
4.Pyrene extinguisher
1.Conductivity
28(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2.Impedance
3.Reluctance
4.Inductive reactance
Balance computation
1.Pound/feet
2.Inches
Page
3.Feet
4.Pound/inches
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
ii) Private a/c are required to be weight after making any alterations
Centre of gravity is
2.Unusable fuel
2.Ease of construction
25.Which coupling nut should be selected for use with Y2 Al-oil lines which are to be asserted.Using flared
tube ends and standard AN bolts nuts,sleeves and fitting
1.AN-818-2
2.AN-818-8
3.AN-818-5
4.AN-818-12
Page
26.Which of the following tubings has the characteristics necessary for use
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
Identification
30(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
29.Which type crack will probably cause the most build up in the magnetic
1.Heat treated
2.Shrink
3.Fatigue
4.Grinding
30.Which of the following NDT method would be most suitable for inspecting
2.Penetrant inspection
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
Heat treatment
1. (i)
2.(ii)
3.(iii)
4. (iv)
34.Select the grip length of the bolt used to fasten two 5/8 steel plates
Together
1. 1-3/8
2. 1-1/4
3. 3/4
4. 7/8
35.If it is necessary to reweld a joint
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Inclusion
2.Fusion
3.Pudding
4.Porosity
1.Depth gage
2.Dial indicator
3.Axle gage
32(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4.Protractor
Its accuracy
1.Gage block
2.Dial Indicator
3.Surface gage
4.Machinist scale
39.When approaching the front of an idling turbo jet engine,the hazard area
1. 35 feet
2. 5 feet
3. 15 feet
4. 25 feet
Intake fire is
1.Dry chemical
2.Carbon tetrachloride
3.Carbon di-oxide
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
42.What would be the action to take,if aviation gasoline in an a/c was connected
For guidance
33(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.drain fuel tanks and fill with proper octane rating fuel
1. F-breaks
2.L- breaks
3.T- breaks
4.S- breaks
45.Both gasoline and kerosene have certain advantage for use as turbine fuel.which of the following is true in
reference to the advantage of each
3.Gasoline has higher heat energy per unit volume than kerosene
4.Kerosene has higher heat energy per unit volume than gasoline
46.Select the solvent recommended for wipe down of cleaned surface just
Page
Before painting
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Aliphatic naptha
2.Tricloro- ethane
4.kerosene
Resistance of wire is
1.4 ohms
2.8 ohms
3.12 0hms
4.16 0hms
34(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. 6000 Hz
2. 12000 Hz
3. 800 Hz
4.. 400 Hz
1. 9:6
2. 6:2
3. 3:1
4 7:4
1.Black
2.Blue
3.Brown
4.White
1.Exhaust pipe
2.Turbine
Page
3.After burner
4.Compressor
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Strength
2.Stiffness
3.Resilence
4.Resistance
1. 1/2 dia
2.1/8 dia
3.1/4 dia
4.1 dia
35(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. Brass
2. Zinc
3. Nickel
4.Silver
1.specific temp.co-efficient
2.Specific conductance
3.Specific co-efficient
4.specific resistance
1.Time period
2.Frequency
3.Amplitude
4.cycle
3.Kirchoffs law
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.Generator principle
3.Either 1 or 2
4.None
1.Selsyn mechanism
2.Desyn mechanism
60.The common base Pnp Junction transistor has reverse biased arrangement
Between
1.Aileron
2.Rudder
3.Elevator
4.Fin
1.Copper,Zinc
2.Copper,Tin
3.Tin,Lead
4.Copper,Lead
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Soapy water
2.Kerosene
37(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Cutting oil
4.None
2.Main plane
3.Tail plane
2.Boundary Lines
3.Hidden detail
4.Centre line
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
70.The towing apparatus used in conjunction with a towing vehicle for pull
1.Towing frame
2.Towing bridle
1.Porosity
2.Lack of penetration
38(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Channel flow
4.Clarity of formation
4.None
1.CRS
2.Cast Iron
3.Magnesium
4.Aluminium
74.For getting high and hour capacity and high terminal voltage the plate of
1.Imbalancing of cells
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Toughness increases
2.Shape of head
3.Length of rivet
4.None
1.Molyberium steel
2.Cast steel
3.stainless steel
4. Brass
4.None
1. N type semiconductor
3.N-P diode
4.P-N diode
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.None
83.Trammel is used
1.Position line
2.Phantom line
3.Both
4.None
1.Ultrasonic
2.Eddy current
3.Dye penetrant
4.Magnetic particle
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Before reaming
2.After reaming
4.None
1.Weber
2.Newton-meter
4.None
1. AND gate
2. NAND gate
3.NOR gate
4. OR gate
Page
1.Yellow Colour
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
2.Black colour
3.Silver(white) colour
4.None
2.Hydraulic motor
3.Gyrometer
1. A+B=B+A
2.A.0 =0
3.A.1 = 0
3.Both
4.None
99.ATA- 36 indicate
1.Oxygen
Page
2. Landing gear
3.Pneumatic system
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.Engine
3.Better penetration
4.None
PAPER II SET A
43(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.Material
2.Temperature
3.Shape of cross-section
4.Length
4.None\par
1. A>B
2.A<B
3.A=B
4.None
3.Both 1 & 2
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.None
5.The workdone on moving a charge from one point to another point depends on
3.Both
4.None
3.Both
44(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4.None
3.Both
4.None
2.Base to collector
3.Collector to base
1.Is infinite
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.Remains constant
1.ROM
2.RAM
3.Floppy-disk
4.Hard disk
1.Density of electrolyte
2.Plate area
3.Internal resistance
45(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4.All
1.Density of electrolyte
2.Plate area
3.Internal resistance
4.No. of cells
14.The motor with two different coils round on different sense,which can rotate in two direction is
1.Series
2.Shunt
3.Compound
2.Manufactured head
3.Both
16.Disposable load is
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Alloying materials
4.Pure materials
1.Type of steel
2.Size of steel
3.Density of steel
4.All of these
46(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.Different in use
2.Similar but hard disk can store more than floppy disk
3.Similar but hard disk can store less than floppy disk
4.None
2.The distance from the centre of one tooth to the centre of next
3.The distance from the centre of one tooth to the centre of the
tooth
4.None
1.1010111011
2.100101000
3.111001100
4.110010111
2.SWO
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Thickness gauge
4.None
24.computer consist of
1.Printer,decoder,memory
2.Input,Output,CPU
47(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Input,Output,Printer
4.None
1.1501
2.1500
3.1401
4.1600
1.Magnesium alloy
2.Aluminium alloy
3.Stainless steel
4.All
1.ROM,CPU,ALC
2.ROM,RAM,PROM
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.ALC,ROM,RAM
4.None
3.Both
4.None
is
1.Boroscope
48(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2.Fibrescope
3.Introscope
4.All
1.Detecting cracks
4.All
4.All
1.chapter 22
2.chapter 23
3.chapter 24
4.chapter 25
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.All
35.High specific gravity of electrolyte is measure by hydrometer.The correction of specific gravity is required
at
1.Everytime
4.All
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.6000 Hz
2.1200 Hz
3. 800 Hz
4. 400 Hz
1.Hard material
2.soft material
3.Cast alloy
4.Magnesium alloy
42.Identiy
50(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.Potentiometer
2.Radiator
3.Auto-transformer
4.Iron transformer
43.Identify
4.None
4.All
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.None
1.Throat
4.Pitch
1.Size
2.Pitch No.
3.Pitch diameter
4.None
1.Yield strength
2.Proof stress
3.Elastic limit
4.Proportional limit
1.Taps
2.Dies
3.On Lathe
4.All
1.Thermistor
2.Pyrometer
3.Colour of thermocouple
Page
4.All
52.Heat treated parts having backed dirt & scale can be cleaned by
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Wire brush
2.Scraping
3.Sand blasting
4.All
1.Rutherorel
2.Beequerel
3.Both
4.None
1.Half-life
2.Curie
3.Both
4.None
4.None
4.All
57.Two identical insulated wire coils are hung from air so that they are
3.Anti-clockwise rotation
4.Clockwise rotation
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Thermistor
2.Transistor
3.Semi-conductor
4.Resistor
60.If a wire having resistance of 4 ohms is stretched twice of its length than its resistance is
1.2 ohms
2.8 ohms
3.16 ohms
4. 4 ohms
61.A conical shaped diamond with an apex angle of 120* used in Rockwell hardness testing is known as
2.Brale
3.Brade point
62.Identification of Titanium
1.Spark test
3.Acid test
63.Annealed metal is
1.soft
3.Low strength
4.All
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
64.Which of these NDT is suitable for the inspection of most plastics and ceramics for surface and sub surface
defects
1.Eddy-currents inspection
2.Ultrasonic inspection
65.what NDT requires little or no part preparation is used to detect surface or near surface defects in most
metals and may be used to detect separate metals or alloys & their heat treatment condition
1.Eddy-current inspection
3.Ultrasonic inspection
54(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
66.The process that is being Nitrided during partial cage hardening of special alloy is known as
1.Passivating
2.Carburising
3.Tinning
67.Which type of cracks can be detected by magnetic particle inspection using either circular or longitudinal
magnetization
1.45 degree
2.Longitudinal
3.Transverse
69.A fibre type self locking nut must be used on a/c if the bolt is
3.Subject to rotation
1.One and half times the thickness of the material which they extend
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
71.In four digit Al alloy system number 2024,the first digit indicate
1.The height of the weld bead should lie 1/8 above the base metal
Filler rod.
4.All
74.One characteristics of good weld is that no oxide should be formed on the base metal at a distance form
the weld of then
1. 1/2
2. 1
3.1.4
75.Which is used to measure alignment of a motor shaft or the plane of rotation of a disk
1.Dial indicator
2.Shaft gauge
3.Protractor
1.machinist scale
2.surface gauge
3.Axial indicator
Page
77.The clearance between the piston rings and ring lands is measured with a
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Micrometer caliper
2.Thickness gauge
3.Depth gauge
Wing fit
1.Blue
56(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2.Colourless or straw
3.Red
4.Green
80.How are aviation fuels which posses greater antiknock qualities than 100
Octane classified
3.Both
1.Excessive anodization
3.Both
4.None
Page
Corrosion by
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
Big
Manufacturing process
1.Micro motor
2.Eddy current
3.Ultra sound
4.Calliper
4.None
1.Seam welding
2.Spot welding
4.None
1.VDU
2.Printer
3.Mouse
Page
4.Floppy disk
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Yield strength
2.True stress
3.Yield sstrength
4.True strain
2.Micro-processor is used
3.Transistor is used
1.E= I1R1+I2R2+I3R3
58(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.E= I1R1+I2R3+I3R2
4.E= (R1+R2+R3)(I1+I2+I3)
1.11101
2.10101
3.10011
4.11111
4.All
1.Screew driver
4.Allen wrench
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
97.Magnesium is
1.prone to corrosion
59(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
3.Tendency to crack
98.When switch is open Volt-meter indicated 1.5V and when closed indicated
1. 1 ohm
2.11 ohm
3.1.35 ohm
4.1.5 ohm
99.Teflon have
1. High pressure
4.Flexible
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.SCR has
1. 2 terminal
2. 3 terminal
2.
60(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. Reversed biased
2. forward biased
3. closed
3.
1.NOR gate
2.NAND gate
3.OR gate
4.AND gate
4.MTCS
5.
2.Auto transformer
3.Vaariable potentiometer
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
9.An ammeter
10.
2.Comination wrench
11.18-8 steel
2.18% Ni, 8% Cr
1.
2.paralketon
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.26
2.28
3.30
4.ATA
15.A Transformer
62(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.transfer electrical energy from one circuit to another with change in frequency
2.transfer electrical energy from one circuit to another without change in frequency
2.All particle are laid in a definite pattern which gives better tensile sstrength
17.
(2).Spanner
(3).Combination
18.
(1).Cutting angle
(2).Cutting edge
(3).flutes
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
(2).Speed handle
(3).Ratchet
21.
22.If close tolerance bolts & rivets are used in same joint,the bolts will be
1.Cd ptd
3.Chromium plated
4.None
23.Vortex Generation
3.Withstand approx.500*Cductile
2.Kerosene
26.
(1).Taper
Page
(3).Parallel
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
(4).None
27.
(2)Electroplating
3.None
29.MAC is
1.Chord of imaginary aerofoil on which force reactor act same as on the chords
Of aerofoil in flight
30.Flaps
3.None
31.Zener diodes
4. Both 1 & 3
1.As rectifier
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Clevis bolt
3.None is correct
1.Binary system
2.Decimal system
3.Octal system
39.Capacitance is measured in
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
40.
1.Torque links
2.Drag links
3.Shock struts
2.
1.Bi-carbonate of soda
2.Boric acid
1.All vertical lines are vertical & horizontal lines are at 30%
1.Orthographic
48.UFD applies on
3.All types
Page
4.Ceramic only
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.X-ray film
4.all
1.Alclad
2.Pure clad
3.Both
67(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.Copper
3.At the point where the pitch circle crosses the tooth
2.Depth of cutting
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
58.A wire is connected to constant voltage its length & radius is doubled
1. 1 input
2. 1 output
3. 1 assignment statement
63.Bottoming tap
1.Corrosion prevention
2.Wear prevention
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.Increased dimension
4. All
3.Magnetic strength
4.All
70.Triode consist of
1.Brass barrel with one side LH thread & other side RH thread
1.Artificial aging
2.Natural aging
1.Aluminium
2.Stainless stell
3.Both
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
80.
(2)
81.Fo r reaming
1. 1011.11
1.Pyrometer
87.
89.Bevel gears
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.
2.
4.All
3.Both
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
Paper II(set-2)
1.Lap joint
2.Butt joint
3 Tee joint
4. Curved joint
2. SCR is
72(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4. Plate, Cathode, heater, & fire screen wire between plate & cathode
4. Both 1 & 2
1. Diode valve
2. Capacitor
3. NPN transistor
Page
4. Both a &b
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
6. The zero line of the sleeve is above the datum of the barrel scale in micrometer ,the error is
1. +ve
2. ve
3. Backlash error
4. ve backlash
1. Zinc chloride
2.Sodium chloride
3. Sulphate acid
4. Nitric acid
1. Held by friction
1. Lift increases
2. Lift decreases
Page
4. None
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
12. The purpose of high lift device such as flap, slat, are
1. Decimal system
2. Octal system
3. Binary system
4. All
74(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. 101.10
2. 1001.01
3. 1011.11
4. 1110.11
4. All
16.ATA 36 indicates
1. Oxygen
2. Landing gear
3. Pneumatic
4. Engine
1. Brittleness
2. More strength
Page
3. Less weight
4. All
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
18. X ray is an
1. Electromagnetic radiation
3. ly charged
4. As a & c
19. For checking high range of resistance use high range Ohmmeter because
4. None
75(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. LOGO
2. FORTRAN 77
3. ALGOL
4. None
1. TTL
2. ECL:
3. Both
4. None
4. None
4. None
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Micrometer.
2. Vacuum chamber
3. Both 1 & 2.
4. None.
4. Flexible.
76(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
26. A transistor is
2. Used as a rectifier.
4. All.
1. Dielectric strength.
2. Thickness of dielectric
Page
3. Frequency.
4. Area of plates.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Machine surface
1. OR gate.
2. AND gate.
3. NAND gate.
4. As 1 & 3
77(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
2. Magnetic test.
3. Both 1 & 2.
4. None.
1. Minor adjustment.
3. Tension only.
4. Bo0th 1 & 3.
1. Mat.
4. None.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4. None.
4. None.
1. COBOL
2. ALGOL.
3. CORDAL.
4. PASCAL.
39. In a scale 24 main scale division is coincide with 25 division of vernier scale and one division of main scale
indicate
1. 0.001 cm.
2. 0.001mm
3. 0.01cm
4. 0.01mm
40. Vernier zero is a head of 1.8 of main scale and 4th is coinciding with main scale 1 division shows 1cm. Then
reading is
1. 1.86cm
2. 1.86cm.
3. 1.56cm.
4. 2.04mm
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4. None.
3. Either 1 & 2.
4. Both 1 & 2.
1. Beveled gear.
2. Worm gear.
3. Planetary gear.
79(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4. All
1. 1001101
2. 1101101
3. 11101001
4. 1011011
1. 11001
2. 1101101
3. 11110
4. 10011
2. Heavy load.
4. None.
3. Both 1 & 3
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4. None
48. During refueling or de-fueling of an a/c, there should not be any naked flame on
1. 10 ft
2. 200 ft.
3. 100 ft.
4. 50 ft.
49. The correct replacement of an item, which has previously been removed, is termed as
1. Out fit.
2. Correct fit.
3. Refit.
80(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4. Fit.
50. During re-fueling the danger of sparking due to static electricity is avoided by
1. Bonding.
2. Screening.
3. Weather proofing.
51. In gear system, a driver and driven on the shaft to get the same direction of rotation
4. None.
1.Draw set
Page
2.Electro fastener
3.Aligning camp
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.None
4.All
4.None
4.Both 1 & 2
58.Double flaring is
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.Both 1&2
1.Hardness
2.Curing agent
4.All
1.Softwaare
63.T & W are the symbol utilized for heat treatment of Al-alloy steel indicates
2.It has high resistance to corrosion quality and can be heat treated
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
66.Galvanic corrosion is
2.Intergranular corrosion
3.Fretting corrosion
4.None
1. 11101
2. 10110
3. 11110
83(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
4. 10101
1. 2 terminals
3. 3 terminals
4. None
1.Regulate voltage
3.Both 1 & 2
71.The most commonly used symbols for electromagnetic flow direction method is
1.UFD
2.MFD
Page
3.PFD
4.EFD
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
72.In oxyacetylene welding ,it is better practice while shutting off the flame
1.200-400* C
2.500-850* C
3.1000-1600*C
1.Metal
3.Carbon
4.All
75.Synthetic thermoplastic
1.Brinell hardness tester measure depth of penetration and reading is directly indicated on dial
4.None
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
4.None
1.Radiograph resolution
2.Radiograph sensitivity
3.Radiograph processing
4.Radiograph density
80.In plastics,minute cracks occurring at weaker area due to applied load and extends
85(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1.Crazing
2.Creeping
3. Fatiguing
4.Crevice corrosion
PAPER-II(Tools)
2. What type of punch is required for loosening straight pins, taper pins,rivets, etc
3. Prick punch is
1.made of hardened tool steel 2. as in 1 & to mark lightly or indent the intersection of lay out lines
4. For turning screw in awkward place where there is no enough room, the particular screwdriver screwdriver
used is
1. stubby s/d 2. off set screwdriver 3. heavy duty screw driver 4. All are correct
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. high grade of steel 2. high speed steel 3.tool steel 4. allare correct
11. Pickling is the process by which rough or dirty outer scales is removed ,for pickling the best part of file is
used is
12. Dreadnought is
13. For cutting v shaped grooves, chip in sharp corners the chisel used is
1. screw pitch gauge 2. hole gauge 3. fillet gauge 4. all are correct
1. Granite 2. cast iron 3. both 1 & 2 are correct 4. All are wrong
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Philips s/d is blunt on the end 2. read & prince s/d is blunt on the end
4. none is correct
1. .4699
1. Tang inserted into handle is known as feed 2. when fileing is done use lubricant
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3. Blade is made of carbon steel & tang is not heat treated 4. none
1. Knurled on both side 2. knurled on one side 3. use on slot by die maker
1. worm 2. throat radious &throat dia 3. Both 1 &2 4. none of the above
32. Which tool should you use to measure the clearance between between a surface plate and a surface being
checked for flatness
33. If the thimble of a stranded micrometer caliper, graduated in thousands of an inch , is turned one
revolution , the spindle will move
34. Which of the following is generally used to set a divider to an exact dimensions
35. Which of the following is generally used to calibrate a micrometer or check its accuracy
36. What measuring tools is used for measuring crank pin & main bearing journals for out of round wear
37. Crankshaft alighnment run out can be checked by rotating the shaft on V- block & surface plate ,the
measurement are taken with a
38. Which tool can be used to determine piston pin out of round wear
39. 25 divisions Vernier scale coincides 24 cms of main scale and 1cm in main scale divided into 20 equal parts
least count is
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1. Inner end of the sleeve is beveelled 2. spindle is screwed into the sleeve
3. the barrel is given a satoin finish 4. thread of barrel accommodates the spindle
41. In a vernier scale 24 division are equal to 25 division of vernier scale , centimeter of main scale is divided
20 equal parts ,the least count is
42. In a scale 9 division of main scale coincides with 10 division of vernier scale and division of main scale
indicates 1mm then 9 division of vernier scale indicates
1. weight of handle 2. weight of head with handle 3. weight of the head without handle
89(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers
1. 80% of the screw slot 2. 60% of the screw slot 3. 75% of the screw slot 4. 100% of the slot
1. fast acting 2. Slow acting 3. Heavy duty tool 4. none of these are correct
1.90* included angel 2. 30* included angel 3. 100* included angel 4. 118 * included angel
1.Hold objects 2.To crimp metal 3.For twisting safety wire 4.For cutting wire
48.The hacksaw blade is installed in the frame so that the teeth are pointing
49..In general,it may be said that as the thickness of the material to be cut decreases
1.The number of teeth per inch increases 2. The number of teeth per inches decreases
3.The number of teeth remain constant 4.none of the above answer is suitable
50. When cutting sheet stock ,pipe,it is necessary touse saw blade with
1.14 to 18 teeth per inch 2. 24 to 32 teeth per inch 3. 8 teeth per inch 4. 10 teeth per inch
52. Which set of hand hacksaw teeth is preferred for fine blades
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3. the entire cone shaped surface at cutting end of drill 4. back bone ofdrill
2. 18% tungsten, 4% chromium , 1% vanadium, about .8% carbon, & rest iron
3.For deep hole drilling 4. For drilling soft & thin sheet material
2.Produce a conical shaped hole in metal or other materials to fit the head of a rivet or screw
1.Extension tap 2.round split die 3.bottomising tap 4.(1) &(3) are correct
3.SWG 4. By micrometer
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.Remove a small quantity of metal from the job 2. Remove a large quantity of metal from the job
3.To give a correct dimension to the job 4.To give a correct dimension and finish
64.A good pickling solution used for loosening the scale from the surface of the metal to be filled contains
66.Which of the following file is suitable to file a hard metal with a slower speed and fine finish
68.While filling the job should be held along with soft clams in between the jaws of the vice in
1.Prevent damage of the finished job 2. Prevent scratches of the jaws teeth
3.To prevent slippage of the job 4.Both (1) & (2) are correct
1.To cut broad,soft metal surfaces 2.To give a smooth finish to heavily cut surface
3.To cut wood and leather 4.To cut corners in soft metal
3.By the arrangement of teeth 4.By the number of teth per inch
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
1.100 teeth per inch 2.80 teeth per inch 3.60 teeth per inch 4.20 teeth per inch
1.Face of he file 2. Tang of the file 3.Edge of the fle 4.Tip of the file
1.single cut dead smooth file 2.Double cut dead smooth file
2.The first teeth starting near the heel to the tip of the file
3.Heel to the tip of the tang 4.Heel to the end of the tang
1.To remove the cutting chips of metal force is applied on file is forward direction
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
83.Which of the following swquence of British screw threads angle are corec when that are arranged in order
to B.B,B.S.E, and U.N.I threads respectively
86.The relation between two mating parts with reference condition of assembly is known as
89.The distance from a point on a screw thread to a corresponding point on the next thread,measured parallel
to the axis is termed as
90.The ang;le made by the helix of the thread at the pitch diameter with a plane perpendicular to the axis
91.When an external thread is cut into the normal diameter of the rod then the thread is termed as
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - (PAPER 2 IMPORTANT 100)
3.None is correct
4.None
3.Neutral flame
4.None
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM