You are on page 1of 2

8/26/2016 www.nihonweld.com/printerfriendly.do?

item_id=15469

NT410/NM410
AWSSpecification: ER410
JISSpecification: NONE
OtherSpecification: FORSTAINLESSSTEEL

I.APPLICATIONS:

Forweldingtypes403,405,410and416.Alsousedasoverlayoncarbonsteelsto
resistcorrosion,erosionorabrasion.

II.DESCRIPTIONS:

NT410/NM410isusedtoweldTypes403,405,410and416.Itisalsousedfor
weldingoverlayoncarbonsteelstoresistcorrosion,erosionandabrasion.Thismaterial,
beingoftheairhardeningtype,callsforpreheatingofthejointto350Fbeforewelding.
Itissuitableforuseagainstcorrosionfromatmosphere,freshwater,andmildacids.

III.TYPICALCHEMICALCOMPOSITIONOFWELDMETAL(%):

C Si Mn Cr Ni Mo

0.06 0.41 0.53 12.93 0.42 0.16

IV.TYPICALMECHANICALPROPERTIESOFWELDMETAL:AT850Cx
2hr

TensileStrength YieldPoint Elongation%
N/mm2(Ksi)
N/mm2(Ksi)

530(77) 310(45) 35

V.SIZESAVAILABLE:

Dia.(mm) 1.6 2.0 2.4 3.2 4.0

Length(mm) 1000 1000 1000 1000 1000

Unit wt./packing 5.0 5.0 5.0 5.0 5.0


(kgs.)

VI.MIGAVAILABLESIZESANDRECOMMENDEDCURRENT:

Size(dia.xlength)mm Amps
0.8xspool 60180
0.9xspool 70200
1.0xspool 70200
1.2xspool 90250
1.6xspool 200300

TESTRESULT

http://www.nihonweld.com/printerfriendly.do?item_id=15469 1/2
8/26/2016 www.nihonweld.com/printerfriendly.do?item_id=15469

The information contained or otherwise referenced herein is


presented only as typical without guarantee or warranty, and
Industrial Welding Corporation expressly disclaims any liability
incurredfromanyreliancethereon.TypicaldataandTestresultsfor
mechanical properties, deposit or electrode composition and other
propertieswereobtainedfromaweldproducedandtestedaccording
to prescribed standards, and should not be assumed to be the
expected results in a particular application or weldment. Actual
results will vary depending on many factors, including, but not
limited to, weld procedure, plate chemistry and temperature,
weldment design and fabrication methods. Users are cautioned to
confirm by qualification testing, or other appropriate means, the
suitability of any welding consumable and procedure before use in
theintendedapplication.

http://www.nihonweld.com/printerfriendly.do?item_id=15469 2/2

You might also like