Professional Documents
Culture Documents
Excavation not carried out for the purpose of soil investigation work (included in Class F: Earthwork ).
Mobilisation and boring for piling (included in Class H: Piling Work ).
Survey and setting out (included in Class A: General Items )
Page 44
Class D : Site Investigation Works
ADDITIONAL DESCRIPTION
MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
RULES
M1 The depth of boring, drilling, D1 Plant movement is the shifting C1 Items for plant movement A1 Item description for water
sampling. and testing shall be of plant or equipment from one shall be deemed to include sample shall state the volume.
measured from the borehole/test position to the dismantling and erecting from
Commencing Surface as next position. one position to another.
follows: A2 Item description for disturbed
a) Not exceeding 10 m. D2 Hillslopes is an access with C2 Sampling shall be deemed to sample shall state the weight
b) 10 20 m. gradient greater than 15 include transportation and of samples.
c) 20 30 m. degrees. preservation.
d) 30 40 m. A3 Item description for block
e) 40 50 m. D3 Small disturbed samples is C3 All field explorations and tests sample shall state the size of
f) Stated exceeding 50 m. less than 5 kg. shall be deemed to include sample.
daily field records and sample
logging.
C4 Items for mobilisation and
demobilisation shall be
deemed to include provision of
all plant , equipment and
ancillaries transportation to the
Site and removal off the Site
upon the completion of the
operation.
Page 45
Malaysian Civil Engineering Standard
Method of Measurement (MyCESMM)
Page 46
Class D : Site Investigation Works
ADDITIONAL DESCRIPTION
MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
RULES
A7 Item description for cone
penetration test shall state the
type, capacity of cone, machine
capacity , and depth, as per
measurement rule M1.
D4 Samples taken from location C8 Miscellaneous tests shall be A9 Item description for trial pit
other than borehole, hand auger deemed to include plant shall state the dimensions.
or trial pit shall be classed as movements on the Site.
sampling . A10 Item description for
C9 Hand auger shall be deemed micellaneous tests shall state
to include ground water the equipment used, setting up
observation. where applicable, method, and
depth.
C10 Trial pit shall be deemed to
include lateral support, ground A11 Item description for plate
water observation, logging and bearing test shall state the
mapping of site wall, and required plate size, test load or
backfilling, unless otherwise pressure, and number of cycles.
stated.
Page 47
Malaysian Civil Engineering Standard
Method of Measurement (MyCESMM)
Page 48
Class D : Site Investigation Works
ADDITIONAL DESCRIPTION
MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
RULES
D5 A set, for soil strength tests, C11 Laboratory tests shall be A13 Item description for laboratory
shall be defined as of three deemed to include preparation tests shall state the method of
specimens ; except for of specimens. testing and the standard
unconfined
unconfined compresssive test
compressive test requirements.
shall be defined as of two C12 CBR test shall be deemed to be
specimens carried out on both ends of A14 Item description for soil
each specimen, unless strength tests shall state the
D6 A set, for soil compaction otherwise stated. size of testing specimen and
related test, shall be defined as type of soil sample, i.e.
of five specimen tests from the C13 Special preparation for equipment undisturbed or remoulded.
sama bulk sample.
the same bulk sample shall be deemed to be
provided separately A15 Item description for direct
when expressly stated. shear box and multi reversal
shear box tests shall state the
size of the shear box.
Page 49
Malaysian Civil Engineering Standard
Method of Measurement (MyCESMM)
4 Magnetic extensometer nr
5 Deep levelling datum nr
6 Monitoring nr
7 Geophysical survey and mapping 1 Seismic refraction survey 1 Setting out sum
2 Installation and readings spread
3 Preparation of bedrock and soil contour sum
maps
4 Utilities detection and mapping 1 Locate, detect, and map all utilities and
services sum
2 Verification with utilities provider sum
3 Conduct site verification sum
Page 50
Class D : Site Investigation Works
ADDITIONAL DESCRIPTION
MEASUREMENT RULES DEFINITION RULES COVERAGE RULES
RULES
M3 Measurement of monitoring in C13 Items for piezometer and A17 Item descriptions for
number shall be based on the inclinometer shall be deemed piezometer and inclinometer
trips to the location of the to include pre-boring and shall state the type, depth, and
instrumentation. installation. material used.
M4 Intervals of geophones for D7 A spread of installation and C15 Setting out for seismic A20 Item description for
seismic refraction survey shall readings for seismic refraction survey and installation and readings for
be measured along the slope. refraction survey shall include resistivity profiling shall be seismic refraction survey shall
a 24-channel seismograph with deemed to include survey state the interval of geophones,
geophones at not more than 5- coordinates, reduced levels, number of shots per set, and
metre intervals. and topographic profile for the type of shots required.
M5 Intervals of electrodes for
each set of installation and
resistivity profiling shall be
readings.
measured along the slope.
D8 Resistivity profiling shall be A21 Item description for
M6 Area measured for geological two-dimensional with C16 Items for verification with installation and readings for
terrain mapping shall be the electrodes at not more than 5- utilities provider shall be resistivity profiling shall state
plan area. metre intervals. deemed to include purchasing the type of configuration,
of necessary documents and number, and interval of
verification on the utilities electrodes required.
D9 Geological terrain mapping
shall be in accordance with detected, as compared with the
guidelines by the Minerals and records of the utilities provider.
Geoscience Department A22 Item descriptions for seismic
Malaysia. refraction survey and
geological terrain mapping
shall state the location and area
of the site to be investigated.
C17 Items for Soil Investigation A24 Item description for reports
Report shall be deemed to shall state the number of sets
include laboratory test results. and the format required.
Page 51