Professional Documents
Culture Documents
0 ARAHAN-ARAHAN (COMMANDS)
RECTANG
Specify first corner point or
[Chamfer/Elevation/Fillet/Thickness/Width]:
Command: EXTRUDE
Current wire frame density: ISOLINES=4,
Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: 1 found
Select objects to extrude or [MOde]:
Specify height of extrusion or
[Direction/Path/Taper angle/Expression]:
Membuat tapak
20
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects:
1 loop extracted.
1 Region created.
EXTRUDE
Current wire frame density: ISOLINES=4,
Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: 1 found
Select objects to extrude or [MOde]:
Specify height of extrusion or
[Direction/Path/Taper angle/Expression]: 40
Membuat Bulatan
[Fence/WPolygon/CPolygon]: *Cancel*
Command: _pasteclip Specify insertion point:
Command: _pasteclip Specify insertion point:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]: *Cancel*
Command: _rotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Specify rotation angle or [Copy/Reference]
<0>:
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
21
Command:
Automatic save to
C:\Users\user\appdata\local\temp\Drawing1_1
_2_5682.sv$
Command: _rotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Specify rotation angle or [Copy/Reference]
<270>:
ROTATE
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: *Cancel*
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
Command:
MOVE
Select objects: *Cancel*
Command: _rotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Specify rotation angle or [Copy/Reference]
<91>:
Command: _move
Select objects: 1 found
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
Command: _move
Select objects: 1 found
Select objects:
22
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
Command:
Press ESC or ENTER to exit, or right-click to
display shortcut menu.
Command: _copyclip
Select objects:
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]:
Command: _.erase 4 found
Command: _circle Specify center point for
circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: _d
Specify diameter of circle: 350
Command: _3drotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point: Regenerating model.
Command: _3drotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point: 50
Regenerating model.
Command: _3drotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
23
Specify angle end point: Regenerating model.
Command:
Press ESC or ENTER to exit, or right-click to
display shortcut menu.
Command: EXTRUDE
Current wire frame density: ISOLINES=4,
Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: 1 found
Select objects to extrude or [MOde]:
Specify height of extrusion or
[Direction/Path/Taper angle/Expression]
<-40.0000>: 15
Command: _3drotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point: Regenerating model.
Command: _circle Specify center point for
circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]
<175.0000>: 10
CIRCLE Specify center point for circle or
[3P/2P/Ttr (tan tan radius)]: *Cancel*
Command: _3drotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
Pick a rotation axis:
Specify angle start point or type an angle:
Specify angle end point: Regenerating model.
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
24
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]:
Invalid window specification.
Specify opposite corner or
[Fence/WPolygon/CPolygon]: Specify opposite
corner
or [Fence/WPolygon/CPolygon]:
25
ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
** ROTATE **
Specify rotation angle or [Base
point/Copy/Undo/Reference/eXit]:
Regenerating
model.
Command: _move
Select objects: 1 found
Select objects:
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>: <Ortho off>
Command:
Press ESC or ENTER to exit, or right-click to
display shortcut menu.
Command:
Specify corner of window, enter a scale factor
(nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/W
indow/Object] <real time>:
26
Specify base point or [Displacement]
<Displacement>:
Specify second point or <use first point as
displacement>:
Command: EXTRUDE
Current wire frame density: ISOLINES=4,
Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: 1 found
Select objects to extrude or [MOde]: 1 found, 2
total
Select objects to extrude or [MOde]: 1 found, 3
total
Select objects to extrude or [MOde]: 1 found, 4
total
Select objects to extrude or [MOde]: 1 found, 5
total
Select objects to extrude or [MOde]:
Specify height of extrusion or
[Direction/Path/Taper angle/Expression]: 5
Command: SUBTRACT
Select solids, surfaces, and regions to subtract
from ..
Select objects: 1 found
Select objects:
No solids, surfaces, or regions selected.
SUBTRACT Select solids, surfaces, and
regions to subtract from ..
Select objects: region
*Invalid selection*
Expects a point or
Window/Last/Crossing/BOX/ALL/Fence/WPoly
gon/CPolygon/Group/Add/Remove/Multiple/P
revious/Undo/AUto/SIngle
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects:
No solids, surfaces, or regions selected.
Command: REGION
Select objects: 1 found
Select objects: Specify opposite corner: 1
found, 2 total
Select objects: 1 found, 3 total
27
Select objects: 1 found, 4 total
Select objects:
1 loop extracted.
1 Region created.
Command: SUBTRACT
Select solids, surfaces, and regions to subtract
from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract
..
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects: 1 found, 5 total
Select objects:
At least two solids, surfaces, or coplanar
regions must be selected.
CONTENTEXPLORER
Customization file loaded successfully.
Customization Group: ACFUSION
Customization file loaded successfully.
Customization Group: EXPRESS
Opening an AutoCAD 2010 format file.
Regenerating model.
Loading Modeler DLLs.
AutoCAD menu utilities loaded.
Command: _RIBBON
Command: COMMANDLINE
Command:
Autodesk DWG. This file is a TrustedDWG
last saved by an Autodesk application
or Autodesk licensed application.
28
Projek Gambaran sebenar
seperti rajah disebelah
29