Professional Documents
Culture Documents
Information
Circumferential
Welders
Microprocessor Control
Three Models
For all Welding Processes
Large Weight Capacities
Operator Friendly
Various Part Lengths
Typical CWL-96 Circumferential Welding System
Introduction
Jetline offers a unique range of circumferential welding The CW5 style is a heavy duty type with a standard weight
systems which have been designed for use with any arc carrying capacity of 5,000 lbs (2,250 kg). As an option,
welding process and for a multitude of industrial circum- it can be supplied in a super duty version carrying up to
ferential welding applications. 10,000 lbs (4,500 kg). Although the standard range
carries parts up to 240" (6 m) long, there is virtually no limit
All Jetline circumferential systems include a sturdy base
to the maximum length to which this fixture can be
unit, a powered headstock and a tailstock which can be
manufactured.
moved along the bed to accommodate differing part
lengths. Standard Features
A complete range of accessories and controls manu- All Jetline circumferential welding fixtures include a ma-
factured by Jetline Engineering complement the range chined base. This permits the tailstock and the welding
of circumferential fixtures to permit them to be made into head to be easily relocated for different parts or for
a fully integrated welding solution. welding at a different position on the same part.
All tailstocks are air-operated to apply a constant clamp-
Description ing pressure to the part throughout the welding cycle.
There are three models of circumferential fixtures avail- The rotation of the headstock on all systems is controlled
able: by a Jetline 9640 microprocessor controller. This can
The CWB style is suitable for light duty work. It features an provide closed loop control of the welding speed as well
integrated welding head support column and is best as control of the complete weld sequence.
suited for applications where the welding is carried out Optional Items
one weld at a time. This style consists of two models, the
Cradle lifts are available on all models. The cradle lift
CWB2 has a maximum part load of 400 lbs (180 kg), the
assists in loading the part to the centerline of the ma-
CWB5 has a maximum part load of 1,000 lbs (450 kg).
chine. Cradle lifts are manufactured specifically to suit
The maximum part length for both models is 240" (6 m).
the diameter of the part to be welded.
The CWL style is suitable for medium duty applications.
Expanding tooling can be provided to provide support
The head and tailstock part of the fixture is supplied with
and gas backing to the weld. This tooling is customized
a separate track and carriage system. This makes it
for the specific part diameter being welded and incor-
simple to carry multiple welding heads to carry out two
porates copper back up segments.
or more welds at the same time. Optional powered
carriages allow motorized linear movement. The circum- A slide-away tailstock can be provided to be used in
ferential unit has a weight carrying capacity of 2,000 lbs conjunction with the expanding tooling. It assists in the
(900 kg) and can carry parts up to 240" (6 m) long. loading and unloading of the parts.
15 Goodyear St, Irvine, California, 92618 U.S.A. Tel: (949) 951-1515 Fax: (949) 951-9237
CWB LIGHT DUTY STYLE
W E LD ING EQ UIP M E NT
16 (400) MO UNT ING PO ST A + 35 (890)
16 (400) A + 40 (1,000)
A 6 (150)
A 6 (150)
12 (300)
65 (1,560)
18 (450) 70 (1,780)
10 (250)
14 (355)
34 (865)
35 (890)
32 (810)
30 (760)
37 (940)
36 (910)
Note:
CWB2 is illustrated, dimensions are in black
CWB5 is a similar design, dimensions are red
All dimensions are in inches (mm)
17
(430)
27
(685) 34
(865)
6 (150) 6 (150) 18 DIA
A STROKE STROKE (450)
91
(2,310)
15
(380)
40
(1,000)
25 (635) 30 (760)
C 57 (1,450)
B 23
CARRIAGE FOR
CARRIAGE FOR MOUNTING
MOUNTING
OF WELDING
OF WELDING EQUIPMENT
EQUIPMENT (585)
27
(685)
17 (430)
34 (865)
30 DIA 91
(760) (2,310)
30
(760) 40
(1,000)
33 6 (150)
A 35 (890) 30 (760)
(840) STROKE
C 68 (1,730)
speed. A machined faceplate is provided as standard. Other speed ranges available - consult factory for details.
APPLICATIONS
APPLICATIONS
This CWB5 system is designed for the manufacturing of The weight carrying capacity of the CW5-96 makes it
copper and stainless steel cooking vessels used in the ideally suited for the welding of pressure vessels and
preparation of candy. Food industry standards are very similar parts. The system shown is equipped with two sets
demanding, in particular, regarding the smoothness of of welding equipment. This is made easy by the system's
the weld underbead. ability to carry multiple carriages on the track. Each
The required weld qual- carriage carries a GMAW (MIG) welding head with wire
ity is assured by the use feeder and gun. Different part diameters are accom-
of expanding tooling in- modated using adjustable vertical slides which lift and
corporating gas back- lower the welding head.
up facilities. The system Similar systems have
utilizes GTAW (TIG) weld- been built using the sub-
ing and is equipped with merged arc welding
tailstock tooling, auto- process. In this case,
matic arc length con- the systems are
trol, cold wire feed and equipped with flux de-
complete weld se- livery and recovery
quence control facilities. equipment.
The CWL-96 illustrated has been designed for the manu- The transportation and storage of caustic chemicals
facturing of gas tanks for trucks. The tanks are made of demands the use of stainless steel containers which
aluminum and consist of a cylinder to which are welded have been welded with the highest integrity weld pos-
two dished heads. The GMAW (MIG) process is used on sible. The CW5-48 circumferential welding fixture shown
a joggle-type joint. To ensure the accurate placement is ideally suited for this type of application. It is fitted with
of the welds, the system is fitted with two tactile large diameter, expanding tooling on the headstock
seamtrackers. Prior to and support tooling on the tailstock. The headstock
welding, they "find" the tooling has gas back-up capabilities to ensure a clean,
two joints and then main- well formed weld under-
tain the correct position bead. The tailstock has
throughout the welding automatic clamping
operation. Two Jetline which uses a hydrauli-
9500 microprocessor cally-operated lock to
controllers use closed- secure the tailstock once
loop control to control it is in position. The unit
the travel speed and all has a single carriage for
the other welding pa- the mounting of the weld
rameters. head.
This CWL-120 system is suitable for the welding of tubes The system illustrated consists of three CW5 fixtures which
and vessels made of stainless steel and nickel alloys. The have been mounted on a common base with a track
movement of the tailstock is powered to permit it to be extending over the complete length. The system is
easily and quickly moved along the bed to accommo- designed for the welding of elliptical flight refuelling tanks
date different part lengths. The carriage, which rolls used on fighter aircraft. The tanks are made of aluminum
along the track behind the circumferential fixture, carries and are welded using the GTAW (TIG) welding process.
a set of GTAW (TIG) welding equipment. The welding Each carriage carries a weld head with multi-axis slides
equipment includes a mechanized weld oscillator, an which follow the elliptical shape and maintain correct
automatic arc torch position at all times. Automatic arc length control
length control and cold wire
with weld se- feed facilities are
quence control mounted on
and a cold wire each carriage
feeder. Hot wire and the whole
feed is an option weld sequence is
with this type of controlled by the
welding system. system.
OPTIONAL ITEMS AND ACCESSORIES
Mounting Brackets
A complete range of brackets to mount
the welding head to the carriage is
available. The brackets are fitted with
cross slides to adjust the torch position
relative to the weld joint, these include X,
X-Y, X-Y-Z and combinations with rota-
tion and tilt facilities. Cold and Hot Wire Feeders
A full range of wire feeders, both for cold
and hot wire feeding, are available.
Wire sizes from 0.020 to 3/32" (0.5 to 2.4
mm) can be accommodated. Models
include both two and four drive roll va- 9500 System Controller
rieties. The 9500 System Controller is a micro-
processor-based system capable of si-
multaneously controlling four welding
parameters. The unit has closed loop
control capabilities, this provides pa-
rameter accuracy levels better than
+1% of the set level.
The 9500 can be used for the control of
any arc welding process and will store up
to 25 weld programs in its memory.
Additional program storage is available
through the use of the optionally avail-
Seamtrackers
able memory pendant and memory
Jetline manufactures and supplies a cards.
range of equipment for longitudinal or
circumferential tracking of the weld joint. The unit can be set to control multi-pass
welding and can be programmed to
The microprocessor-based tactile control up to 25 sequential weld passes,
seamtracker uses the latest control tech- each pass can use entirely different
nology to assure consistent, accurate Arc Length Control
parameters.
tracking of the weld seam. This is Jetline's Model 401 microprocessor-
achieved by the use of a tactile probe controlled arc length control is used for Ease of use is assured by the custom
which senses the position of the seam GTAW (TIG) and Plasma (PAW) welding. It designed menu-driven software.
relative to the welding head. A signal is is designed to maintain a precise and
sent through the control to the cross- consistent arc length throughout the weld Welding Gear
slide motors which drive the slides up or process. The unit includes a touch re- Jetline can interface the welding power
down and left or right to maintain the tract facility to preset the arc length prior supply and other welding gear with any
correct welding torch position. to welding. circumferential welding fixture to pro-
vide a completely integrated welding
For applications where it is not possible The microprocessor design provides
system. Equipment for
to use a tactile probe, the optical easy-to-use setup screens and an un-
any welding process
seamtracking system is available. This cluttered front panel for operator con-
can be fitted includ-
system uses a sensor which "paints" the venience. The menu-driven software
ing GTA, Plasma, GMA
part with a laser stripe. The resulting provides ease of use.
and submerged arc
image is received and analyzed and
Two arc length control actuators are welding. All necessary
corrective signals sent to the cross slides.
available, one with 6" (150mm) stroke, cables and hoses will
A large range of cross-slides with differ- the other with 12" (300mm) stroke. This be supplied to provide
ent weight capacities and stroke lengths extended stroke is ideal for circumfer- a system which can be introduced into
is available from Jetline for virtually any ential applications to accommodate production immediately following deliv-
welding application. different part diameters. ery.
Distributed by:
The right to make engineering refinements is reserved. Dimensions and specifications are subject to change without notice. CW-2/02-1