Professional Documents
Culture Documents
The Smith High Abrasion Resistance Configuration (SHARC) bits are designed with
the durability to withstand the demands of highly abrasive formations without
sacrificing ROP.
Specifications
Total Cutters 120
Cutter Size 16mm (5/8 in)
Face Cutters (52) 16mm
Gauge Cutters (6) 16mm
Cone Cutters (16) 16mm
Back-Up Cutters (46) 16mm
Blade Count 6
Nozzles 9 Standard Series 60N
Bit Connection 7 5/8 Reg
Junk Slot Area, in2 45.833
Gauge Length: 4" Protection: Options Available
Length Make-Up: 14.914 Overall: 20.102
Fishing Neck Diameter: 9.28 Length: 4.186
Operating Parameters
Bit Speed Suitable for Rotary & PDM
Weight-on-Bit 33,000 To 62,000 (lbf)
14,998 To 28,179 (daN)
15 To 28 (Tonnes)
Flow Rate galUs/min 500 To 1400
Hydraulic Horsepower, HSI 1 To 6
Recommended Make-up Torque 61,850 To 79,800 ft/lbs
Operating parameters are typical ranges. Please contact your Smith Bits
representative for recommendations for your individual well.
* Mark of Schlumberger
Copyright 2017 Schlumberger. All Rights Reserved.
Date: 06/25/2015 Datasheet ID: 18721 www.slb.com/sharc