You are on page 1of 3

CPUs SIL COM- Programming Protocols Note

interfaces interfaces

CPU
F 8650X 3 2 yes Modbus, master/slave, HIPRO-S/N CPUs for H51q each with 1 MB user, operating
system and data memory
F 8652X 3 2 yes Modbus, master/slave, HIPRO-S/N CPUs for H41q each with 1 MB user, operating
system and data memory

Communication modules
F 8621A 3* 2 yes Modbus-slave, HIPRO-S/N RS485 interfaces
F 8627 3* 1 - OPC-DA, safeethernet 100 Base-T, RJ-45 interface
F 8627X 3* 1 - OPC-DA, OPC-A&E, safeethernet, 100 Base-T, RJ-45 interface
ELOP II via TCP, MODBUS-TCP
F 8628 0 1 - PROFIBUS-DP-slave
F 8628X 0 1 - PROFIBUS-DP-slave, ELOP II via TCP

I/O SIL Channels LB/LS Ex Note


modules

Input modules digital


F 3236 3 16 - - Contacts, 1 signal 24 VDC
F 3240 3 16 - - Contacts, 1 signal 110 VDC/127 VAC
F 3248 3 16 - - Contacts, 1 signal 48 VDC

Input modules Initiator


I/O SIL Channels LB/LS Ex Note
modules
F 3237 3 8 yes - SN-, proximity switches, wired contacts
F 3238 3 8 yes yes SN-, proximity switches, wired contacts, 8 DU
wide, ATEX

Input modules analog


F 6217 3 8 yes - Current, voltage
F 6221 3 8 yes yes Current, voltage, ATEX

Output modules digital


F 3325 3 6 - yes Ex transmitter supply module for F 6221, ATEX
F 3330 3 8 - - 24 VDC to 0.5 A
F 3331 3 8 yes - 24 VDC to 0.5 A
F 3333 3 4 - - 24 VDC to 2 A
F 3334 3 4 yes - 24 VDC to 2 A
F 3335 3 4 - yes 24 VDC, ATEX
F 3348 3 8 - - 48 VDC to 0.5 A
F 3349 3 8 yes - 24 VDC/48 V DC to 0.5 A

Output modules analog


F 6705 3 2 - - Current

Special modules
F 3430 3 4 - - Relay module, 110 VDC/250 V AC to 4 A
I/O SIL Channels LB/LS Ex Note
modules
F 5220 3 2 yes - Counter module initiator, 5 VDC, 24 V DC to 1
MHz, 2 integral digital outputs 24 VDC to 0.5 A
F 6220 3 8 yes yes Ex thermocouple module, ATEX
* in conjunction with safety-related protocol

Terminal modules
H 7015A Terminal Module with Vario plug ELCO 8016
(Code 1-1). For wiring to e.g. H 7016, H 7018.
H 7018 Terminal Module with Vario plug ELCO 8016
(Code 1-1). For wiring to H 7015(A).
H 7020 Terminal Module for connection between I/O
modules and the field level

You might also like