Professional Documents
Culture Documents
D45
Surface drill rig for limestone
and cement quarries, open pit
mines, and aggregate quarries.
the surface drill rig powerroc d45 is designed to provide cus- High reliability due to straightforward design
tomers with a reliable, robust and straightforward drill rig. Robust performance thanks to the use of the
this provides easy maintenance and operation as well as high proven Atlas Copco technology
reliability.
By using direct control, the PowerROC D45 is and dust collection system. The PowerROC D45
easily operated and maintained. Using less provides safe operation and environmentally
components eases troubleshooting and impro- friendly working . Our PowerROC D45 is perfect-
ves reliability and service. The PowerROC D45 ly suited for the limestone and cement quarries,
is an integrated hydraulic drill rig which inclu- open pit mines, and aggregate quarries when
des the cab, automatic rod handling system high working efficiency is a must.
TECHNICAL SPECIFICATIONS
Tramming system including triple grouser pads with cleaning holes, hydrau-
lic track oscillation and two speed traction motor
MAIN COMPONENTS
+ performance
By using proven Atlas Copco technology and Down-The-Hole drilling;
engine hydraulic system
the PowerROC D45 provides reliable performance and high drilling
quality year round. Combined with low initial investment, good fuel Turbo charged diesel engine, Cummins, Stage III Ambient temperature - 20 50C
Power rating at 1 800 rpm 234 kW Gear pump (1) 95 l/min
efficiency and high penetration rate, you are kept on the profitable side
Gear pump (2) 95 l/min
always!
Gear Pump (3) 45 l/min
COMPRESSOR
Gear pump (4) 75 l/min
Atlas Copco C146, single stage screw type air compressor Filtration rate 16 m absolute
Working pressure, max 17 bar
The cabin of our PowerROC D45 provides a safe space for operations, electrical system
good visibiliy during drilling, and the control levers are at arms length. feed Voltage 24 V
The dust collection system suppresses the dust during drilling, provid- Hydraulic motor driven chain feed with hose guide and double drill Batteries 2 x 12 V, 180 Ah
ing the operator a cleaner and clearer operation plus an environmentally tube support with break-out table and movable lower guide / dust Alternator 28 V, 95 A
Components of the PowerROC D45 are designed for easy maintenance. volumes
All hoses and cables are marked at each end which allows for easy Hydraulic oil tank 360 l
dust collector Hydraulic system, total 450 l
trouble-shooting. Also, the electrical system simplified design results in
Model: DCT 150 Compressor oil 63 l
easier service.
Filter area 15 m2 Diesel engine oil 30 l
Diesel engine, cooling water 60 l
Number of filter elements 15 pcs.
Diesel engine, fuel tank 500 l
Suction capacity at 500 mm wg 350 l/s
Traction gear 3l
Suction hose diameter 127 mm
Lubrication tank (ECL) 10 l
Cleaning air pressure, max 7.0 bar
Cleaning air consumption 2 4 l/pulse
and maintenance
+ WORLD CLASS SERVICE
Hydraulic rod handling system for max hole depth, with 3 m (9.87) rods
PowerROC D45 76 mm Rod 21 m
FlexiROC T35the
Even and FlexiROC
best T40 are flexible and versatile
equipment requires regular service to Single pass drilling, max hole depth
tophammer drill rigs,optimal
ensure developed and designed for high per-
performance. Atlas Copco provides
formance in demanding construction applications. PowerROC D45 3.3 m
service solutions toTheysafeguard
are an optimized relation-
also a very between
ship efficient alternative for small and medi um size
productivity, availability and opera-
quarrying jobs.cost.
tional Even in tough terrain
Atlas conditions, utilization Mining and Rock Excavation
Copco
of the rig is high, thanks to the long reach
Technique has over 3300 technicians located in of the boom,
FlexiROC T3580 and FlexiROC T40 are flexible and versatile rotary head
over countries. By combining the usage of Atlas
Copco genuine parts with service provided by a Connection Max torque, drilling Max torque, breaking
Rotary head Max rpm Suitable for DTH hammer
certified Atlas Copco technician, youll have a win- thread Nm Nm
ning combination no matter of where in the world DRU 4 API 2 7/8 IF 144 1140 1640 3 and 4 DTH hammer
you operate.
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
dth hammer (to be ordered separately) coverage areas and swing angles
Productivity.
This is what we call Sustainable Productivity.
time.
oftime.
towardsour
people
responsibiltiestowards
testof
thetest
Sustainable
the
standthe
ourresponsibilties
and
performancestand
environment
makeperformance
www.atlascopco.com
call
byour
what we
the
standby
Westand
Wemake
towards
This is
We
We