You are on page 1of 3

@AIRBUS

A321

AIRCRAFT CHARACTERISTICS
AIRPORT AND MAINTENANCE PLANNING

AC

The content of this document is the property of Airbus.


It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may
information contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of
the copyright. Requests for reproduction of any data in this document and the media authorized
for it must be addressed to Airbus.
AIRBUS S.A.S. 2005. All rights reserved.

AIRBUS S.A.S.
Customer Services
Technical Data Support and Services
31707 Blagnac Cedex
FRANCE

Issue: Sep 30/92 Rev: May 01/17


@A321
AIRCRAFT CHARACTERISTICS - AIRPORT AND MAINTENANCE PLANNING

HIGHLIGHTS

Revision No. 21 - May 01/17

LOCATIONS CHG DESCRIPTIONS OF CHANGE


CODE
CHAPTER 2
Section 2-12
Subject 2-12-0
Engine and Nacelle R
FIGURE Power Plant Handling - Fan R REVISED THE ILLUSTRATION TO ADD
Cowls - CFM56 Series Engine GROUND CLEARANCE REFERENCE.
FIGURE Power Plant Handling - Thrust R REVISED THE ILLUSTRATION TO ADD
Reverser Cowls - CFM56 Series Engine GROUND CLEARANCE REFERENCE.
FIGURE Power Plant Handling - Fan R REVISED THE ILLUSTRATION TO ADD
Cowls - IAE V2500 Series Engine GROUND CLEARANCE REFERENCE.
FIGURE Power Plant Handling - Thrust R REVISED THE ILLUSTRATION TO ADD
Reverser Halves - IAE V2500 Series GROUND CLEARANCE REFERENCE.
Engine
FIGURE Power Plant Handling - Major R REVISED THE ILLUSTRATION TO ADD
Dimensions - PW 1100G Engine GROUND CLEARANCE REFERENCE.
FIGURE Power Plant Handling - Fan R REVISED THE ILLUSTRATION TO ADD
Cowls - PW 1100G Engine GROUND CLEARANCE REFERENCE.
FIGURE Power Plant Handling - Major R REVISED THE ILLUSTRATION TO ADD
Dimensions - CFM LEAP-1A Engine GROUND CLEARANCE REFERENCE.
Section 2-14
Subject 2-14-0
Jacking of the Landing Gear R PART EFFECTIVITY
ADDED/REVISED/DELETED
FIGURE Jacking of the Landing Gear - N ILLUSTRATION ADDED
Maximum Load Capacity to Lift Each
Jacking Point
FIGURE Jacking of the Landing Gear - N ADDED ILLUSTRATION TO SHOW THE
Maximum Load Capacity to Lift Each MAXIMUM LOAD CAPACITY TO LIFT
Jacking Point EACH JACKING POINT.
ILLUSTRATION ADDED

CHAPTER 5

HIGHLIGHTS
Page 1
May 01/17
@A321
AIRCRAFT CHARACTERISTICS - AIRPORT AND MAINTENANCE PLANNING

LOCATIONS CHG DESCRIPTIONS OF CHANGE


CODE
Section 5-8
Subject 5-8-0
Ground Towing Requirements R NOTE AMENDED
FIGURE Ground Towing Requirements R REPLACED MINIMUM TRACTOR
WEIGHT BY TOTAL TRACTION WHEEL
LOAD. ADDED NOTE ON TRACTOR
DRAWBAR PULL LIMIT.
ILLUSTRATION REVISED
PART EFFECTIVITY
ADDED/REVISED/DELETED
FIGURE Ground Towing Requirements - N ADDED ILLUSTRATIONS ON GROUND
PW 1100G Engine TOWING REQUIREMENTS.
ILLUSTRATION ADDED

CHAPTER 6
Section 6-3
Subject 6-3-1
FIGURE Danger Areas of the Engines - R REVISED THE DIMENSION OF EXHAUST
IAE V2500 Series Engine DANGER AREA.

HIGHLIGHTS
Page 2
May 01/17

You might also like