You are on page 1of 2

808

PC SOFTW ARE
DEEP SEA ELECTRONICS PLC
CONFIGURATION
INTERFACE

Issue 2
VH 27/6/01

DESCRIPTION

The 808 PC Software Configuration The software offers the following options:
Interface is designed for use with the
following DSE systems: LOAD previous configurations from
disk.
511/512 manual start.
520/521/560 auto-start. SAVE new configurations to disk.
530 automatic transfer switch.
540 range of protection READ the existing configuration from
expansion/annunciator modules. the module.
The 808 interface will also be used
SPECIFICATON
to configure a number of future DSE WRITE a new configuration to the DC SUPPLY :
modules. module. The 808 interface is powered from
the module to which it is connected
The 808 interface allows the user to EDIT the configuration currently so no external power supply is
access the configuration stored required. The module however will
loaded in the PC.
within the module, enabling changes need to be connected to a suitable
DC supply.
to be made to the settings e.g. PRINT the configuration currently
loaded in the PC. DIMENSIONS:
Edit MISCELLANEOUS items 57mm x 55mm x 16mm
View the DIAGNOSTIC display from OPERATING TEMPERATURE
Edit CONFIGURABLE INPUTS the module. RANGE:
o
-15 to +55 C
Edit RELAY OUTPUTS CALIBRATE the module meter drive INDICATIONS:
output. 'Link OK' in corner of diagnostic
Edit FRONT PANEL LEDS screen plus link status indication.
SET-UP the software, such as COM PC REQUIREMENTS:
Edit SYSTEM TIMERS port selection. Processor:
486 66Mhz
Edit ANALOGUE LEVELS QUIT Operating System:
Windows 95/98/2000, Windows NT.
Ram:
The interface kit comprises:
16Mb
Monitor:
Interface module. NOTE
14 inch SVGA (640x480 resolution)
Fixed disk:
For further details on using the
25 way to 9 way RS232 adapter 10Mb free (80Mb minimum)
software and configuration options,
cable and interconnecting FCC 68 Disk drive:
please refer to the 808 Operating
CD-ROM drive for software
cable to allow connection to the Manual. installation.
module. Communications:
An RS232 comms port is needed to
TM
CD containing the MS-Windows communicate with the 808.
based PC software and various
CONNECTION:
module configuration files to aid
The interface should be connected
rapid module configuration.
to the appropriate PC COM port on
your computer system, and the
Also included on the CD is a
FCC68 cable inserted into the
program which can be used to make
socket on the rear of the module to
labels for the configurable LEDs on a
be configured.
module to identify functions.
CASE DIMENSIONS

FCC68 RS232

55.0mm RS232 55.0mm


FCC68

57.0mm
16.0mm

TYPICAL CONNECTIONS

51x,52x, 53x or 54x Module

DC Supply
Terminals 'Prog' Socket on rear of module

NOTE:- When connected to


808 a completed Panel/Gen-set
F
Real time diagnostic
status display is available

Deep Sea Electronics plc


Highfield House, Hunmanby Industrial Estate, North Yorkshire, YO14 0PH, England
Tel: +44 (0) 1723 890099 Fax: +44 (0) 1723 893303 E-mail sales@deepseaplc.com

You might also like