Professional Documents
Culture Documents
SCHEDULE
Name of Work: Construction of 2- Storied Garments Building ( Steel, Civil, Evapoartive Cooling, Plumbing & Sanitary, ) with including all the works as related. (
1.1.2 1 Engineers site office of minimum 38 sqm plinth area with providing security fencing, 5 Kva L.S. 1 1,500,000.00
stand-bye generator, furniture, first aid-box, safety helmet, level / theodolite, consumables,
stationeries etc.
02.1 2 Earth work in excavation in all kinds of soil for foundation trenches including. layout,
providing center lines, local bench-mark pillars, leveling, ramming and preparing the base,
fixing bamboo spikes and marking layout with chalk powder, providing necessary tools and
plants, protecting and maintaining the trench dry etc., stacking, cleaning the excavated earth
at a safe distance out of the area enclosed by the layout etc. all complete and accepted by the
Engineer, subject to submit method statement of carrying out excavation work to the
Engineer for approval. However, Engineers approval shall not relieve the contractor of his
responsibilities and obligations under the contract.
02.1.1 (a) Layout and marking for earthwork in excavation in foundation accepted by the SqM 12,050 20.00
Engineer. [Plinth area of the structure shall be considered for measurement]
2.1.4 (b) Earthwork in excavation in foundation trenches up to 1.5 m depth and maximum 10 m CuM 7,932 280.00
lead
(c) Earthwork in excavation in foundation trenches below1.5m depth and maximum 10 m CuM 8,774 350.00
lead
2.10.1 3 Sand filling in foundation trenches and plinth with sand having F.M. 0.5 to 0.8 in 150mm CuM 9,314 995.00
layers including leveling, watering and compaction to achieve minimum dry density of 90%
with optimum moisture content (Modified proctor test) by ramming each layer up to finished
level as per design supplied by the design office only etc. all complete and accepted by the
Engineer.
Ref. of
Sl.
PWD Description of Item Unit Quantity Unit Rate, BDT
Sch No No.
02.13 4 Earth filling in foundation trenches and plinth in 150 mm layer with earth available within CuM 10,807 320.00
90 m of the building site minimum dry density of 90% with optimum moisture content
(Modified proctor test) including carrying watering, leveling, dressing and compacting to a
specified percentage each layer up to finished level etc. all complete and accepted by the
Engineer.
2.10.1 5 Sand filling from EGL to FGL with sand having F.M. 0.5 to 0.8 in 150mm layers including CuM 4,400 995.00
leveling, watering and compaction to achieve minimum dry density of 90% with optimum
moisture content (Modified proctor test) by ramming each layer up to finished level as per
design supplied by the design office only etc. all complete and accepted by the Engineer.
3.1 6 One layer of brick flat soling in foundation or in floor with first class or picked jhama bricks SqM 4,839 515.00
including preparation of bed and filling the interstices with local sand, leveling etc. complete
and accepted by the Engineer.
03.4 7 Mass concrete (1:3:6) in foundation with cement, sand (F.M. 1.2) and picked jhama chips
including breaking chips, screening, mixing, laying, compacting to levels, side shuttering
and curing for at least 7 days including the supply of water, electricity and other charges and
costs of tools and plants etc. all complete and accepted by the Engineer.
03.4.1 (a) Mass concrete in foundation (1:3:6) with cement, brick chips and sand of F.M. 1.2 CuM 8,500.00
(a) 12mm thick cement sand plaster on wall (1:4) with " SBR ". (Rate excluding cost of SqM
"Foam Lub".
(b) 12mm thick cement sand plaster (1:4) with bitumaneous paint. (Rate including cost of SqM
bitumaneous paint)
03.7 (c) Supplying and laying of single layer polythene sheet weighing two kilogram per 6.5 SqM 10,650 75.00
square meter in outer surface of padestal column complete in all respect and accepted
by the Engineer.
(d) Supplying and use of water proofing chemical admixture in all plaster etc. as following
dosages
(i) Dosages of admixture in plaster @ 250 to 400ml per bag of cement. (Product Litre 660 350.00
Baral Chemical Company Ltd.)
04.3 9 Brick works with first class bricks in cement sand (F.M. of sand 1.2) mortar (1:4) in CuM 412 7,500.00
foundation filling the joints/interstices fully with mortar, racking out the joints, cleaning and
soaking the bricks at least for 24 hours before use and curing at least for 7 days etc. all
complete including cost of water, electricity and other charges and accepted by the Engineer.
(from EGL to FGL)
Ref. of Sl.
PWD Description of Item Unit Quantity Unit Rate, BDT
Sch No No.
7.6 10 Reinforced cement concrete works using steel shutter with minimum cement content relates
to mix ratio 1:1.5:3 having minimum f'cr = 30 Mpa, and satisfying a specified compressive
strength fc = 25 Mpa at 28 days on standard cylinders as per standard practice of Code
ACI/BNBC/ASTM & Cement conforming to BDS EN-197-1-CEM 1 (32.5 to 52.5 N) /
ASTM-C 150 Type I, best quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and 20
mm down well graded stone chips conforming to ASTM C-33, making, placing shutter in
position and maintaining true to plumb, making shutter water-tight properly, placing
reinforcement in position; mixing with standard mixer machine with hopper, fed by standard
measuring boxes, casting in forms, compacting by vibrator machine and curing at least for
28 days, removing centering-shuttering including cost of water, electricity, testing charge of
materials and cylinders, other charges etc. all complete approved and accepted by the
Engineer.
[Rate is excluding the cost of reinforcement and its fabrication, binding and welding].
8.1.2 (a) 420/400-grade (B420/400DWR)/400G deformed bar (60 grade) Qtl. 3,530 67,000.00
08.1.2 (a) 420/400-grade (B420/400DWR)/400G ribbed or deformed bar with minimum fy (ReH)
= 420/400MPa & tensile strength (fu or Rm) at least 525 Mpa, minimum elongation
after fracture and total elongation at maximum force is 16% and 8% respectively
6.10 6 Supplying, fitting and fixing GP homogeneous stair tiles (local made Super quality Tiles)
with cement sand (F.M. 1.2) mortar (1:4) base and raking out the joints with white cement
including cutting and laying the tiles in proper way and finishing with care etc. all complete
and accepted by the Engineer.
12.3 7 Supplying, fitting and fixing 38 mm finished well matured, natural seasoned (min 10" wide
plank) wooden ornamental special design (equivalent hatil) both sides single panel flush
door shutter with top and middle rail 150 mm x 38mm bottom rail 225 mm x 38 mm and
style 125 mm x 38 mm, having vertical panels 175 mm x 38 mm in./c minimum 12 mm lap
to each panel providing 4 nos, best quality 100 mm brass hinges, 12 mm dia best quality 200
mm & 300 mm brass socket and tower bolts 2(two) now heavy type best quality brass handle
hinges cleats, wooden buffer blocks in/c supply of necessary nails and screws finished by
making design by machine finished etc. all complete in all floors and accepted by the
Engineer (Ctg. teak wood).
19.2.1 10 Supplying, fitting, fixing, and installation of ordinary type M.S. gate (double leaf) of any SqM 140 4,400.00
design and shape with 38 x 38 x 6 mm M.S. Angle outer frame having 16 mm dia M.S. rod
placed vertically @ 75 mm c/c. at bottom part and top part (arrows) and also placed
horizontally at bottom for interconnection of 16 mm dia M.S. rod placed vertically as per
design, the top part covered with 18 BWG M.S. sheet and fixed with 4 Nos. 38 x 6 mm F.I.
bars placed diagonally and 4 Nos. 38 x 6 mm F.I. bars placed horizontally and vertically all
passing through the center, providing locking arrangements on 3 mm thick M.S. plate one
for main gate and one for minimum 300 x 1025 mm pocket gate with 38 x 38 x 6 mm M.S.
angle and 16 mm dia M.S. rod placed vertically @ 75 mm c/c, providing 38 x 38 x 6 mm
M.S. angle clamps fitted and fixed with the outer frame of the main gate, the clamp being
embedded in R.C.C. or R.C.C. core pillar with cement concrete (1:2:4) in masonry including
cutting holes and mending good the damages, finishing, curing etc. including riveting,
welding as and where necessary, painting two coats with approved quality of synthetic
enamel paint over a coat of priming of anti-corrosive paint etc. all complete as per drawing,
design and accepted by the Engineer.
(Rate is excluding the cost of paint).
22.3 11 Supplying, fitting and fixing 10mm thick clear tempered glass door including all accessories SqM
1 set maintenance auto closed special quality 2 nos clamping device, 1 set locking device,
top hinge and handle etc. complete in all respect as per drawing and direction of the
Engineer in Charge.
22.9 12 Supplying fitting, fixing of uPVC plastic door or window frame having specific gravity 1.35 Rm 752 3,000.00
- 1.45, and other physical, chemical, thermal, fire resistivity properties etc. as per BSTI
approved manufacturer standards or ASTM, BS/ISO/IS standards fitted and fixed in brick
wall/ R.C.C wall with 6 Nos. GI clamp, 4Nos inner joint GI clamp, 2 Nos. outer GI joint
clamp, 16 Nos. rivet making necessary grooves and mending good the damages, finishing,
curing, carriage etc complete in all respect accepted by the Engineer.
Ref. of
Sl.
PWD Description of Item Unit Quantity Unit Rate, BDT
Sch No No.
22.10 13 Supplying, fitting, fixing of uPVC hollow or solid plastic door shutter having specific
gravity 1.35 - 1.45, thickness 1.7 mm-2.2 mm, and other physical, chemical, thermal, fire
resistivity properties etc. as per BSTI approved manufacturer standards or ASTM, BS/ISO/IS
standards of different sizes fitted fixed with uPVC plastic door frame weighing 5.82 kg/m2
with at least 3 Nos. SS hinges by min 64 Nos. 3.17 mm and 3.97 mm 12.7 mm long rivets,
12 Nos. 25.4 mm SS screws, 9.38 mm, 150 mm long SS tower bolts 2 Nos., 146 mm SS
handle by rivet 2 Nos., G.I inner joint 234.95 mm x 127 mm clamp, 76.2 mm x 57.15 mm,
25 mm dia 1 no SS haspbolt, special type round lock, carrying the same to the site and local
carriage etc. complete in all respect accepted by the Engineer
22.10.2 (a) 760 mm x 2130 mm uPVC plastic shutter (solid). Each 155 6,600.00
14 Supplying, fitting & fixing the following hard ware
12.25 (a) 20mm dia & 300mm long C.P. hatch bolt Each 3 1,000.00
12.23.1 (b) Mortice Door Lock approved brand Each 3 3,000.00
(c) Supplying and installation of Pad lock of 50mm size Each 3 1,000.00
14.6 15 Supplying, fitting and fixing of Aluminium sliding window as per the U.S. Architectural
Aluminium Manufacturers Association (AAMA) standard specification having 1.2 mm
thick outer bottom (size 75.50 mm, 32mm), 1.2 mm thick outer top (size 75.50 mm, 16.80
mm), 1.2 mm thick shutter top (size 33 mm.26.80, 22 mm), 1.2 mm thick shutter bottom
(size 60mm, 24.40 mm), 1.2 mm thick outer side (size 75.50 mm,19.90 mm), 1.2 mm thick
sliding fixed side (size 31 mm, 26 mm),1.2 mm thick shutter lock (size 49.20 mm 26.20
mm) and 1.2 mm thick inter lock (size 34.40 mm, 32.10 mm) sections all aluminium
members (total weight kg/sqm) will be anodized to aluminium bronze/silver colour with a
coat not less than 15 micron in thickness and density of 4 mg per square cm etc. including all
accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door
neoprene, bolts and nuts including sealants, keeping provision for fitting 5 mm thick glass
including labour charge for fitting of accessories, making grooves and mending good
damages, carriage, and electricity complete in all respect as per drawing and accepted by the
Engineer.
15.4 17 Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:6) having with fresh cement to
wall both inner-and outer surface, finishing including washing of sand cleaning the surface,
scaffolding and curing at least for 7 days, cost of water, electricity and other charges etc. all
complete in all respect as per drawing and accepted by the Engineer.
16.8.1 27 Plastic emulsion paint of approved best quality and colour delivered from authorized local SqM 34,506 200.00
agent of the manufacturer in a sealed container, applying to wall and ceiling in two coats
over lime putty of specified brand applied on primer or sealer elapsing specified time for
drying/recoating including cleaning drying, making free from dirt, grease, wax, removing all
chalked and scaled materials, fungus, mending good the surface defects, sand papering the
surface and necessary scaffolding, spreading by brush/ roller/spray etc. all complete in all
floors accepted by the Engineer.
Lime putty to be applied as per manufacturer instructions approved and accepted by the
Engineer.
16.6 20 Painting M.S..window frames, shutters, grille, collapsible gate, rolling shutter in two coats SqM 2,445 200.00
over a coat of marine lead primer with approved best quality and colour of synthetic enamel
paint delivered from authorized local agent of the manufacturer in a sealed container, having
highly water resistant, high bondibilty, flexible, using specific brand thinner applied by
brass/roller/spray over a coat of priming elapsing time for drying including surface cleaning
from dust, oil or dirt, smoothening, finishing and polishing with sand paper and necessary
tools, scaffolding, testing charges etc. all complete in all floors approved and accepted by the
Engineer.
16.4 21 On exterior surface applying as per manufacturer instructions 3 coat of weather coat of SqM 1,696 180.00
approved quality and colour delivered from authorized local agent of the manufacturer in a
sealed container complete in all respect in all floors and accepted by the Engineer.
16.14 22 French polishing to door and window frames and shutters three coats over a coat of priming SqM 19 160.00
including putty, cleaning finishing and polishing with sand paper etc. all complete in all
floors accepted by the Engineer.
20.4 23 Supplying, fitting and fixing stainless steel (SS) stair railing of standard height with 2 mm SqM 340 6,000.00
thick 2.5 dia pipe for hand-rail as per drawing and accepted by the Engineer.
22.2 23 Supplying, fitting and fixing of 20mm dia foreign made aluminium pipe curtain rail for door Rm 300 550.00
and window including cutting and fitting fixing as per required measurement and supplying
necessary screws, electric drill and rowel plug including charge of electricity etc. complete
and accepted by the Engineer.
- 25 Clading work of Ceramic Tiles, using DT-5 or CT-5 of Mirpur Ceramic or approved best
quality wih 1:3 cement sand morter base of required thickness of following colour as per
drawing and direction of the Engineer-in-Charge.
- 27 Site cleaning work after completion of all works under the contract including carrying the L.S. 1 300,000.00
debris upto a lead of 305M, stacking them in neat measurable stack in a place instructed by
the centre head etc. complete in all respect as per specification and direction of the Engineer-
in-Charge.
Section A Total:BDT
3-Mar-17
CHEDULE
e Cooling, Plumbing & Sanitary, ) with including all the works as related. (As a finish building)
Total, BDT
1,500,000.00
241,000.00
2,220,960.00
3,070,900.00
9,267,430.00
Total, BDT
3,458,240.00
4,378,000.00
2,492,085.00
798,750.00
231,000.00
3,090,000.00
Total, BDT
17,531,250.00
9,500,250.00
5,967,500.00
1,180,500.00
2,074,000.00
3,205,300.00
236,510,000.00
-
-
6,221,250.00
702,843.75
3,751,000.00
4,446,750.00
Total, BDT
-
787,650.00
840,000.00
-
1,762,200.00
1,190,000.00
-
133,500.00
28,000.00
24,390,450.00
-
25,578,000.00
-
213,600.00
224,000.00
1,815,600.00
1,232,000.00
-
783,562.50
814,476.80
-
715,050.00
210,027.52
-
15,750.00
8,268.80
-
162,225.00
562,278.40
-
128,362.50
134,781.44
Total, BDT
-
167,737.50
47,959.04
117,990,000.00
323,618,000.00
-
14,041,300.00
14,743,365.00
666,400.00
686,392.00
105,000.00
4,800.00
Total, BDT
810,000.00
616,000.00
2,256,000.00
Total, BDT
1,023,000.00
-
3,000.00
9,000.00
3,000.00
3,468,000.00
2,944,000.00
1,832,880.00
2,442,400.00
270,810.00
Total, BDT
260,225.00
Total, BDT
420,000.00
6,901,200.00
489,000.00
305,280.00
3,040.00
2,040,000.00
165,000.00
17,083,000.00
Total, BDT
882,000.00
300,000.00
900,166,580.25
Ref:TMBD/F2/GARMENTS/SL2/SL4/LAND-SL5 /RF 007
SCHEDULE
Name of Work: Construction of 2- Storied Garments Building ( Steel, Civil, Evapoartive Cooling, Plumbing & Sanitary, ) with including all the wo
building)
Section B: Steel Structure Works (Including all the works related)
Item Description Unit Quantity
2 All Nut Bolts (A325(Type-1)/DIN 933, Gr- 8.8 (Galvanized) and Washer
(ASTM F436) for Joint Kg 18,900
7 Purlin, Girt, Eave Sturt with Sag Angle (ASTM A653M SS340(Grade 50)
Class-1, Coating Z200 ) Galvanized Kg 80,850
11 Decking Fastener- 12 X 24 X 32
Kg 525
Accessories:
15 Double bubble Insulation thickness 10 mm sqm 12,128
Section B Total:BDT
Conditions:
Before start steel structure project work, following documents shall have to maintain:
1. Contractor shall submit the APD (Approval Drawing) or GA drawing before Fabrication.
2. Detailed Fabrication Drawing shall be prepared by the the Contractor & submit to the consultant.
5. Contractor shall submit the Material Test certificate (MTC) & welding electrode test certificate .
6. Contractor shall submit the Welding Procedure Specification (WPS) & Procedure Qualification Record (PQR).
7. Contractor shall maintain the daily Cutting, Fit-up, Weld log, materials surface cleaning (Sandblasting),
Paint inspection checklist and report to consultant (as per the requirement of consultant)
8. Contactor shall submit the Welder Qualification Test Record (WQTR) and test certificate provided by
AWS (American Welding Society) authorized representative as per the position (like, 1G, 2G, 3G, 4G) prescribe by consultant.
Aging of the Cirtificate of the Welder shall not exceed 1 year at the time of work start.
9. Contactor shall submit the resume of QA/QC Inspector and He will Maintain QA/QC report of welding log,
weld fit up report,visual inspection after cutting and welding,dimension checkup and inspection checklist during fabrication work.
11. Contactor shall perform and submit the test report of the followings:
12. All structural steel material shall be sand/Grit/Shot blasted , prior to the first coat of primer
at the work shop and second coat of recommended paint as described in painting section of
120 93,240,000
220 4,158,000
80 420,000
115 5,071,500
110 2,079,000
100 840,000
115 9,297,750
130 682,500
115 9,177,000
110 577,500
250 131,250
130 9,555,000
250 166,750
250 84,000
0
0
485
5,882,080
125
2,625,000
8
9,117,816
7
6,717,900
159,823,046
scribe by consultant.
9 Towel Rail: No 40
Supplying, fitting and fixing C.P. Super quality Towel rail of size 600 mm long and 20 mm
dia with C.P. holder including making holes in walls and mending good the damages and
supply and carriage of all materials, labours, tools, C.P. hold down screws with eyelet,
incidentals, etc. all complete in place as per drawings, specification and direction of the
Consultant/PD.
10 Pillar Cock: No 63
Supplying, fitting and fixing Special quality 12mm dia C.P. Pillar cock (Sharif or Nazma or
equivalent) including supply and carriage of all materials, labour, tools, incidentals, etc.
all complete as per direction of the Consultant/PD
11 Glass Mirror: No 63
Supplying, fitting and fixing on wall 5mm thick glass mirror (Made in Japan) 450 mm x
350 mm size with hard boards at the back with all necessary fittings including making
holes in walls and mending good the damages and supply and carriage of all materials,
labours, tools, C.P. hold-down screws with eyelets, incidentals, etc. complete in place as
per drawings, specification and direction of the Consultant/PD.
a). 20 mm dia No 10
b). 25 mm dia No 20
c). 32 mm dia No 10
d). 40 mm dia No 10
e). 50 mm dia No 20
f). 100 mm dia No 20
20 Pressure Reducing Valve:
Supplying, fitting and fixing pilot operated gate and diaphragm type Brass pressure
reducing valves Germany/ Italy/ or equivalent complete with inlet and outlet service on
riser lines to reduce pressure from 30 psi to 7 psi (2.11-0.49 kg/cm2) including making
water tight joints of the valves and fitting by using proper sealing compound, supply of all
labour, tools, incidentals, etc. all complete as per drawing and direction of the
Consultant/PD. Product shall be standard quality or approved equivalent. Contractor
shall produce model of product with manufacture certificate or equivalent guide line.
a). 50 mm dia No 10
b). 65 mm dia No 10
21 Foot Valve with Strainer
Supplying, fitting and fixing best quality float valve with strainer shall be made of cast iron
flange end type complete with companion flanges, gasket, nuts, bolts etc. It shall be
have built-in stainless steel strainer. Product shall be standard quality or approved
equivalent. Contractor shall produce model of product with manufacture certificate or
equivalent guide line.
65 mm dia No 4
22 Check Valve with Strainer :
Supplying, fitting and fixing best quality gun metal check valve with strainer including
supply and carriage of all materials, labor, tools, incidentals etc. complete as per
direction of the Consultant/PD. Product shall be standard quality or approved equivalent.
Contractor shall produce model of product with manufacture certificate or equivalent
guide line.
Groove size 40x40 mm (For Laying 12mm to 20mm dia pipes) RM 500
Groove size 75x75 mm (For Laying 25mm to 40mm dia pipes) RM 300
Section C Total:BDT
42,797.00
-
-
15500 186,000.00
-
-
-
-
2600 208,000.00
-
-
-
-
2900 49,300.00
-
-
-
5300 333,900.00
-
-
-
-
3200 201,600.00
-
-
-
-
700 108,500.00
-
-
-
1200 110,400.00
-
1200 75,600.00
-
1250 50,000.00
-
1200 75,600.00
-
1000 63,000.00
-
-
-
1200 136,800.00
1300 15,600.00
-
-
-
-
-
1200 226,800.00
-
-
350 45,500.00
200 2,000.00
-
-
-
450 63,000.00
-
-
410 41,000.00
530 132,500.00
880 220,000.00
950 9,500.00
1200 12,000.00
1300 195,000.00
1300 -
1800 270,000.00
-
-
1080 10,800.00
2100 42,000.00
2480 24,800.00
2800 28,000.00
3600 72,000.00
7000 140,000.00
-
-
10000 100,000.00
10000 100,000.00
-
-
5000 20,000.00
-
-
5000 10,000.00
-
-
2450 4,900.00
-
-
-
-
60 30,000.00
80 24,000.00
3,438,100.00
Ref:TMBD/F2/GARMENTS/SL2/SL4/LAND-SL5 /RF 007
SCHEDULE
Name of Work: Construction of 2- Storied Garments Building ( Steel, Civil, Evapoartive Cooling, Plumbing & Sanitary, ) with
related. (As a finish building)
Section D: Exhaust & Evaporative cooling system Works (Including all the works related) in 1st Floor.
Control Panel: Fully Computerized controller & Electric Control Cabinet with
temperature & Humidity sensor for 52 Nos. fan (QCHS-1250) & 2 Nos. water
4 Pump. Sets. 1
Water Pipe Line: G.I Pipe (4" line delivery line, 3/4 " to pad) Water pipelines
including all pipe fittings from reservoir tank to cooling pad and back from it to
5 reservoir. length 450 Feet Sets. 1
22,000.00
62,000.00
15,000.00
300,000.00
700,000.00
620,000.00
1,719,000.00
Total Head Works
file:///conversion/tmp/scratch/364064777.xls