You are on page 1of 2

Information & Technical Data Sheet

Product Name: Earth Acrylic Sealer

Product Description: Earth Acrylic Sealer has been specifically designed to use on
concrete and masonry floors where quick drying and fast
solvent release are required. The solution is ideal for use on
pattern pave driveways and other floor areas where strong
sunlight is expected, and where pale and pastel colors are to
be used.

Features: Earth Acrylic Sealer produces a hard, yet flexible clear film. It
is non-yellowing and has excellent resistance to water, alkalis
and contains a UV absorber to improve protection from
ultraviolet light. The product supplied as a 25% solution in a
blend of solvent 100 and xylene.

PHYSICAL AND CHEMICAL PROPERTIES - SOLUTION

Type : Thermoplastic acrylic solution


Appearance : Clear, colorless viscous liquid
Odor : Hydrocarbon
Specific gravity (g/ml) : 0.93
Solids : 24.0% - 25.5%
Solvent : Solvent 100 / Xylene
pH : Not applicable
Viscosity (Cps @25C) : 40 - 100
Flash Point : 25C
Boiling Range (C) : 138C - 180C
Vapor Pressure : 1.0 Kpa @20'C (Xylene)
% Volatile by volume : 75%
Flammability Limits (v %) : LEL: 0.8% UEL:6.6%
Solubility Limits : Immiscible

TYPICAL PROPERTIES - FILM

Appearance : Clear, colorless


Nature : Hard, flexible
Resistance to Weathering : Excellent, non- yellowing
Tg : 55C

-1-
Applications: Earth acrylic Sealer is ideally suited to use in clear or
pigmented coatings for a wide variety of substrates.
Applications include concrete and masonry protection, slate
sealers, and coatings for pavers.

Compatibility: Earth acrylic sealer is compatible with a wide range of


industrial solvents including aromatic hydrocarbons such as
xylene, toluene, solvent 100.

Formulation: The coating is supplied ready for application by brush, roller


or spray, or can be further diluted with the appropriate
solvents. The formulation has solids of 35%, and will give
coverage of about 6-8 square meters per 1 kg, depending on
the substrate porosity.

Packaging: Available in closed containers in three different sizes such as


5 kg., 10 kg., or 20 kg.

Handling & Storage: Store in a cool, dry area at ambient temperatures and out of
direct sunlight. Store away from sources of heat or ignition,
strong alkalis, acids, combustibles and oxidizing agents. Keep
container tightly closed when not using product. Do not
empty into drains waterway or sewers.

Contact: Earth Colors Co Ltd


187/7 Soi Khunsab
Bangkhunnon Road
Bangkok 10700
Tel: +662 887 5388-9
Fax: +662 433 4033
Email: info@bhumiscape.com

-2-

You might also like