Professional Documents
Culture Documents
Services:
HVAC
Process
Petrochemical
OEM
Supply Water
Backwash
Condensate Return
Chemical
Primary Metals
Shaft
420 stainless steel alloy
Rigid and sized to
Impeller
minimize deflection at Hydraulically balanced One piece bronze or other alloy
seal area Back pump out vanes prohibit material Expertly machined to customer specifications
from building up behind impeller Fully balanced prior to assembly
Casing
400
Heavy duty ASTM A48 cast iron or other alloy Casing
300 Fully cast integral feet for support 400 Heavy duty ASTM A48 cast iron or other alloy
200 Centerline discharge transmits residual pipe strain to 300
Cast integral square base
150 feet of casing and eliminates the need for left- or 200 Inline suction and discharge
100 right-handed casings and impellers 150
Integral vortex suppressor on suction
80 Standard, heavy duty case wear ring 100 Standard, heavy duty case wear ring
60
50
Heavy wall thickness to provide generous 80
Heavy wall thickness to provide generous
60
40 corrosion allowance 50 corrosion allowance
30
Centerline discharge is self-venting 40
Back pull-out for quick removal of impeller
20 30
Integral vortex suppressor on suction assembly
15 20
Back pull-out for quick removal of impeller assembly Pressure taps on suction and discharge to verify
10 15
Pressure taps on suction and discharge to verify pump pump performance
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000 10
performance Optional 300# suction and discharge flanges
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000
Optional 300# suction and discharge flanges
Impeller
Motor
Model REC Stuffing Box
Standard American-Marsh Series
810 Carbon/Silicon-
Hydraulically balanced
Back pump out vanes
prohibit material from
Model REI Standard stock C-face motor
Available in a variety of enclosures
Services:
HVAC
Process
Petrochemical
OEM
Supply Water
Backwash
Condensate Return
Chemical
Primary Metals
Shaft
420 stainless steel alloy
Rigid and sized to
Impeller
minimize deflection at Hydraulically balanced One piece bronze or other alloy
seal area Back pump out vanes prohibit material Expertly machined to customer specifications
from building up behind impeller Fully balanced prior to assembly
Casing
400
Heavy duty ASTM A48 cast iron or other alloy Casing
300 Fully cast integral feet for support 400 Heavy duty ASTM A48 cast iron or other alloy
200 Centerline discharge transmits residual pipe strain to 300
Cast integral square base
150 feet of casing and eliminates the need for left- or 200 Inline suction and discharge
100 right-handed casings and impellers 150
Integral vortex suppressor on suction
80 Standard, heavy duty case wear ring 100 Standard, heavy duty case wear ring
60
50
Heavy wall thickness to provide generous 80
Heavy wall thickness to provide generous
60
40 corrosion allowance 50 corrosion allowance
30
Centerline discharge is self-venting 40
Back pull-out for quick removal of impeller
20 30
Integral vortex suppressor on suction assembly
15 20
Back pull-out for quick removal of impeller assembly Pressure taps on suction and discharge to verify
10 15
Pressure taps on suction and discharge to verify pump pump performance
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000 10
performance Optional 300# suction and discharge flanges
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000
Optional 300# suction and discharge flanges
Casing
Model REF Standard ASTM A48 Class 30 cast iron
Heavy wall thickness to provide for generous
corrosion allowance
Flex-Coupled Integral vortex suppressor on suction
Fully cast integral feet for support when utilizing Impeller
back pull-out feature Hydraulically balanced
Centerline discharge transmits residual pipe strain One piece bronze or other alloy
to feet of casing and eliminates the need for left- Expertly machined to customer
or right-handed casings and impellers specifications
Pressure taps on suction and discharge to verify Fully balanced prior to assembly
pump performance Back pump out vanes prohibit
Optional 300# suction and discharge flanges material from building up behind
Centerline discharge is self-venting impeller
Bearing Pedestal
Heavy duty ASTM A48 cast iron
Single row inboard and outboard
bearings
Oil lubricated power frame with
integral sight glass
Six bearing pedestals cover all
Sizes: 1-1/4" to 12" 42 models
Flows: 9,000 GPM Lip seals on each bearing housing
cap to keep out contaminents
Heads: 450 Feet
Temp: 250 F
Services:
HVAC
Process
Petrochemical
Supply Water
Shaft
Backwash
Designed and sized especially for the
Condensate Return pump and its applications
Chemical High strength 420 stainless steel
Primary Metals material standard
Efficiently designed to minimize
shaft deflection at the stuffing box
Shaft Sleeve
Heavy duty bronze or other
alloy
Protects the shaft from wear
Can be easily removed and
400 replaced when worn Back Pull-out Feature
300
200
150
100
80
60
50
40
Stuffing Box
30
Case Wear Ring Standard American-Marsh Series 810 Carbon/Silicon-
20
Carbide/EPDM mechanical seal
15 Standard bronze or other alloy Packing, component or cartridge seals can be specified
10 Can be easily removed and One piece cast iron or other alloy
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000 replaced when worn Heavy duty with integral flush line for packing or seal
For additional support, larger lubrication
models have a front and back
case wear ring
Casing
Model REF Standard ASTM A48 Class 30 cast iron
Heavy wall thickness to provide for generous
corrosion allowance
Flex-Coupled Integral vortex suppressor on suction
Fully cast integral feet for support when utilizing Impeller
back pull-out feature Hydraulically balanced
Centerline discharge transmits residual pipe strain One piece bronze or other alloy
to feet of casing and eliminates the need for left- Expertly machined to customer
or right-handed casings and impellers specifications
Pressure taps on suction and discharge to verify Fully balanced prior to assembly
pump performance Back pump out vanes prohibit
Optional 300# suction and discharge flanges material from building up behind
Centerline discharge is self-venting impeller
Bearing Pedestal
Heavy duty ASTM A48 cast iron
Single row inboard and outboard
bearings
Oil lubricated power frame with
integral sight glass
Six bearing pedestals cover all
Sizes: 1-1/4" to 12" 42 models
Flows: 9,000 GPM Lip seals on each bearing housing
cap to keep out contaminents
Heads: 450 Feet
Temp: 250 F
Services:
HVAC
Process
Petrochemical
Supply Water
Shaft
Backwash
Designed and sized especially for the
Condensate Return pump and its applications
Chemical High strength 420 stainless steel
Primary Metals material standard
Efficiently designed to minimize
shaft deflection at the stuffing box
Shaft Sleeve
Heavy duty bronze or other
alloy
Protects the shaft from wear
Can be easily removed and
400 replaced when worn Back Pull-out Feature
300
200
150
100
80
60
50
40
Stuffing Box
30
Case Wear Ring Standard American-Marsh Series 810 Carbon/Silicon-
20
Carbide/EPDM mechanical seal
15 Standard bronze or other alloy Packing, component or cartridge seals can be specified
10 Can be easily removed and One piece cast iron or other alloy
12.6 20 30 40 60 80 100 150 200 300 400 600 800 1000 1200 1600 2000 2500 5750 9000 replaced when worn Heavy duty with integral flush line for packing or seal
For additional support, larger lubrication
models have a front and back
case wear ring
American-Marsh Pumps provides the user dependability and durability by
designing pumps with upgraded, heavier-duty components. Durability by
design is always the most cost effective solution.
CASING
The casing is designed for back pull-out making service easy
and is also provided with additional thickness for corrosion
allowance. Surfaces are machined to accurate tolerances in our
machining centers. Centerline discharge allows for self-venting
casings and cast integral feet provide additional support.
MECHANICAL SHAFTS
SEALS/PACKING American-Marsh Pumps standard product design includes 420
Stuffing boxes are supplied standard stainless steel shafts designed for corrosion resistance and mini-
with a front loading mechanical seal. mum shaft deflection. Each shaft is machined to close tolerance
Due to the flexibility in design , pack- and designed to exceed HP requirements of each pump.
ing and/or cartridge seals can be sup-
plied upon request.