Professional Documents
Culture Documents
Specification
Section 02825
AMERISTAR
1555 N. Mingo Road Tulsa, Oklahoma 74116 Phone: (800) 321-8724 Fax: (877) 926-3747 E-mail:
arch@ameristarfence.com Web site: http://www.ameristarfence.com
PART 1 - GENERAL
1.05 REFERENCES
ASTM B221 - Aluminum and Aluminum Alloy Extruded Bars, Shapes and Tubes
1.06 SUBMITTAL
The manufacturer's literature shall be submitted prior to installation.
2.01 MANUFACTURER
The top track shall conform to the Ameristar AdapTrack cross-section, manufactured by Ameristar
Fence Products, Inc., in Tulsa, Oklahoma.
2.02 MATERIAL
A. The material used for the AdapTrack shall be manufactured from ASTM B221 aluminum
(designation 6005-T5) with a yield strength of 35,000 PSI.
B. Rigid gate panel and any diagonal truss bracing is responsibility of others.
C. Brackets (specify for 2 square or 2-3/8 round gate panel frame) shall be supplied with each
kit.
D. Two upper suspension rollers and two lower guide rollers shall be included with each kit.
2.03 FABRICATION
A. The AdapTrack extrusion shall be mechanically fastened to gate panel framing as shown in
manufacturers literature.
PART 3 - EXECUTION
3.01 PREPARATION
All new gate installations shall be laid out by the contractor in accordance with the construction
plans.
3.02 INSTALLATION
B. Attach truck brackets and upper suspension rollers to gate posts per end view (crosssection) in
construction drawings; slide AdapTrack toprail onto rollers.
3.03 CLEANING
Contractor shall clean jobsite of excess materials; post hole excavations shall be scattered uniformly
away from gate posts.