Professional Documents
Culture Documents
T35 E
Surface drill rig for
construction, road construction
and urban development.
Hole diameter:
64 102 mm / 2 1/2 4
Born to ROC
a new rig for a tough gig
Come rain or shine the new PowerROC T35 E is a
partner that wont let you down. Thanks to its
straight-forward design, the robust Atlas Copco
components and impressive power.
Due to the COPLogic control system long reach, the PowerROC T35 E is the
as the standard configuration which strong choice in a variety of con-
ensures the good contact with the rock struction settings, including housing
and the high drilling quality, together foundations, road building, pipe line
with the extendable boom which can building and trenching.
easily realize the quick positioning and
Main benefits
Higher productivity with increased air and
Atlas Copco COP rock drills as a standard
feature
a new rig for a tough gig Track frames with single grouser pads, hydraulic track oscillation and
two speed traction
Long feed with 22ft/6.7m single pass
Carousel type rod handling system
The easy-to-operate PowerROC T35 E is a powerful and reliable surface Tier 3 (Stage IIIA) diesel engine size Cummins QSB6.7 142 Kw Hydraulic rock drill
drill rig without cab, loaded with proven Atlas Copco technology for Tier 4 (Stage IIIB) diesel engine size Cummins QSB6.7 150 Kw Dust collection system
higher productivity, low maintenance and quality drilling. Screw type air compressor Both side (L/R) traction/position control (short feed), single side traction/
3 ft / 800 mm extendable boom system position control (long feed)
Cylinder driven aluminium feed system Swing arm type control panel
rock drill and the COP Logic control system, which are standard features, Power rating at 2 500 rpm 145 kW 195 HP
and you will have full control over your operation, wherever your business
dust collector
takes you.
feed Filter area 18.4 m2 198 sq.ft
Number of filter elements 8 pcs.
Hydraulic cylinder feed with hose guide and double drill tube sup-
+ Easy maintenance and serviceability port with break-out table and movable lower guide/dust hood Cleaning air pressure, max 4.0 bar 58.0 psi
Cleaning air volume 17 34 l/pulse 170 N l/min
The PowerROC T35 E is ergonomically designed with the operators Feed extension 1 500 mm 59
safety in mind. All service points are within easy reach, which means easy Feed rate, max 0.85 m/s 167 ft/min
access and easy maintenance on the ground. Feed force, max 19.6 kN 4 406 lbf
Tractive pull, max 19.6 kN 4 406 lbf
hydraulic system
Travel length 4 400 mm 174
Hydraulic oil cooler
Max ambient temperature 50C 122F
Hole range
Type of Drilling diameter Max. hole depth Drill steel length
Feed type
drilling mm inch m feet mm feet
ATLAS COPCO SERVICE Single pass
Short feed
Long feed
3.6
6.0
12
20
4270
6700 (3050 + 3660)
14 x 1
22 (10 + 12)
4 5
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
Hydraulic cylinder feed system employs rigid coverage areas and swing angles
aluminum feed beam with precise feed force
Wide drilling coverage with center for long drill steel life and straight holes.
pin boom swing. Short feed version 97
2
R3
R3
2 933
R7
R1 2 729
1 709 R5
Winch option available for 2 304
drilling in gradients.
R2
1 251
R6
R4 2 785
2 619 R8 Short feed version
2 431 Long feed version
R3
93
9
Foldable swing arm. The control panel is adjust- Long feed version
D2
D4 4 215
4 318
dimensions and weight
Height and length
Tramming
3 527 mm (SF) 116
Height
3 450 mm (LF) 114
Vertical reach (mm)
9 289 mm (SF) 371
Length T3
9 300 mm (LF) 306
R
H1 4765
42
T1
54
R2
4105 50
Transport 8
2 615 mm (SF) 86
Height F1 F2
2 950 mm (LF) 98 2669 2042
F3 F4
9 849 mm (SF) 323 2202 1493
Length H2 F5 F6
10 540 mm (LF) 347 1837 1064
T2
Width 2 360 mm 78 T4 656
1118
Feed height l1
H1
9 250 mm (LF) 304
L
l2 4 856 mm 1549
Weight F8
2533 F7
2339
12 500 kg 27 557 lb H
30 30
20
20
optional equipment 90 90 Front face horizontal drill coverage area (mm, short feed)
Dotted area: Front coverage area with feed 7 degrees from horizontal
Carrier Safety cabin
Track chains with single grouser pads Revolving light kit
Track chains with triple grouser pads Side view mirror kit
Super rotation system Both side (L/R) traction/positioning system for long feed
Hydraulic winch Lube oil, lube system and water mist system
ROC Care components Water mist system (150 liters water tank)
6 7
9851 3461 01b, 2015-10 Yokohama, Japan. Legal Notice Copyright 2015, Atlas Copco Construction and Mining Equipment Co., LTD. Any unauthorized use or copying of the contents or any part thereof is prohibited.
Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco
Customer Center for specific information.
www.atlascopco.com