You are on page 1of 14

ICAL TRANSMISS

MECHANICAL
TRANSMISSIONS

MECHANICAL TRANSMISSIONS

ON BOARD WITH US
If you are looking for:
A reliable and winning partner
Over 50 years of experience in PGB
and AGB design and manufacturing
Advanced design capabilities THEY’VE ALREADY CHOSEN US
A total solutions provider General Electric Eurojet
International support team Rolls-Royce Snecma
An experienced casting partner Pratt&Whitney Italian and Brazilian Air Forces
Full support for CRO and MRO activities Pratt&Whitney Canada Epi

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
MECHANICAL
TRANSMISSIONS

MECHANICAL
TRANSMISSIONS TAKE A LOOK AT WHAT WE CAN DO

ALL AROUND DESIGN


BEHIND THE PRODUCTION PROCESS
Proven track record across different products
and platforms
POWER GEARBOXES Co-design with customer engineering Extensive product range
AND ACCESSORY Integrated gearbox analysis Excellent in-service performance
DRIVE TRAINS High power density gearbox design
Integration with engine lube and fuel systems
Solid functional integration
Cross-sector knowhow, in design, testing
Whole system modeling and dynamics assessment and control
Low part count design for improved reliability Verticalization of production
Fireproof design Dedicated manufacturing cells
DID YOU KNOW? Air/oil system technologies Lean production cells
Over 50 years of experience and over 4,800 gearboxes Advanced gear design methodologies Sample production with rapid prototyping technologies
produced every year (over 40,000 gears of different (including tooth topography optimization Leading edge technologies for cost efficiency
based on true stress calculation) Consistent quality of part thanks
types such as Bevel, Sun, Spur, etc). Our expertise in
Bi-helical gears to stable machining/manufacturing conditions
design, manufacturing and testing is a winning element High and low speed planetary systems State-of-the-art tools to design the process
if you are looking for a reliable partner. Thanks to our Split torque architecture
design capabilities and manufacturing tecniques, Offset planetary architecture TESTS & MEASUREMENTS
Robust bevel gear optimisation Propeller loads, oil flow rate and temperature settings
ranging from casting of aluminium and magnesium High strenght bearing materials Automatic mission simulation
parts to gear machining and gearboxes assembly and Integral bearing races Health monitoring
testing we can deliver excellent helicopter, turboprop Health monitoring system Development tests
and aeroengine transmissions. Our engineers and Damage tolerance and 3D crack propagation Certification endurance tests
Virtual testing Low speed durability test
highly specialized technicians offer full support and we Hot hardness steel Static fatigue testing on housing
guarantee the quality of all our products and customer Castings design and melting process simulation Thermal mapping
care services. Assembly tool concept definition, PGB efficiency evaluation
design and construction Attitude test
Light alloy housing with integral cored lines
WE CARE, WE OVERHAUL
ADT, LPT (NGV and case) and oil tank - GEnx
ADT, LPT (nozzle) - GE90
AGB, Oil pump and Oil tank - V2500
ADT and Oil tank - Trent900

OUR MECHANICAL TRANSMISSIONS

TP400 ••• CH53 ••• BR 710 ••••


PW1100 • • •• • AS365 ••• PW4000 •••
PW1500 ••• CF6-80 ••• EJ200 ••••
PW150 ••• GE90 •••• T700 ••••
EC 175 ••• V2500 •••• TRENT900 ••••
PW800 ••• GEnx •••• SaM146 ••••
LM6000 ••• LM2500 ••• PW2000 •••

• Design Responsibility • Manufacturing


• Casting • CRO

CONNECT WITH US OUR MECHANICAL


TRANSMISSIONS PLANTS
transmissions@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero ARE LOCATED IN:

RIVALTA DI TORINO (ITALY) BORGARETTO/BEINASCO (ITALY) HARBIN (CHINA) TURIN (ITALY) POMIGLIANO D’ARCO (ITALY)
167,000 Sqm specialised in Design and Machining 25,000 Sqm specialised in Casting 27,000 Sqm specialised in Machining 12,000 Sqm specialised in Testing 78,000 Sqm specialised in CRO
RBOMACHINERY
TURBOMACHINERY

TURBOMACHINERY

ON BOARD WITH US
If you are looking for:
Over 35 years of experience
in turbines design and production
A reliable partner
Concurrent design
A solutions provider THEY’VE ALREADY CHOSEN US
International team support General Electric Eurojet
An experienced Additive Manufacturing partner Rolls-Royce Turbo Union
A great design specialist and manufacturer Pratt&Whitney Canada Snecma
Careful support for CRO and MRO activities CFM International Italian and Brazilian Air Forces

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
TURBOMACHINERY

TURBOMACHINERY TAKE A LOOK AT WHAT WE CAN DO BEHIND THE PRODUCTION PROCESS


Proven track record across different products
ALL AROUND DESIGN Extensive product range
Extensive turbine database Excellent in-service performance
Multidisciplinary design approach Solid functional integration
Multi-objective parametric optimisation Cross-sector knowhow, in design phase,
Validation by experimental tests testing and control
Strong research network Verticalisation of production
Light alloy housing with integral cored lines
Parametric CAD generation Dedicated manufacturing cells
DID YOU KNOW? Detailed components optimisation
With over 35 years of experience, our expertise in Components design and certification TESTS & MEASUREMENTS
design, manufacturing and testing is a winning element Advanced aeromechanics tools Cold flow in Turin (Italy) to characterise turbine
Module management aerodynamic & aero acoustic behaviour at design
if you are looking for a reliable partner.
point & in off design conditions, using the fluid-dynamic
High-level competence in design, multi-technique ALL AROUND TECHNOLOGY similarity
manufacturing, such as with 3D printing, and testing TiAl blades by EBM 2.7 bar inlet pressure, 28 Kg/s max massflow,
allows us to deliver reliable, top-of-the-class products. Innovative low noise technologies 0.85 bar minimum discharge pressure, 9000 rpm,
High aspect ratio airfoil mistuning 3200 kW max power
Our engineers and highly specialized technicians offer Aggressive DUCT & Functional TRF Multipassage Cascade test rig: to characterise airfoils
full support and we guarantee the quality of all our 3D patented optimal profiles aerodynamic behaviour varying geometrical
products and customer care services. Tip timing for health monitoring & aerodynamic parameters, using the fluid-dynamic
Acoustc liners by ALM similarity
Net shape hipping Soon a Cold flow facility in Zielonka (Poland):
7.5 bar inlet pressure, 80 kg/s max massflow,
0.24 bar min discharge pressure, 5000 rpm
(extendeble to 15000 rmp with additionale GBX
and HS brake system), 13000 kW max power
also for SAS flow injection, acoustic measurements
& analyses and provision for dual spool systemw
Spin-rig in Torino for Synchronous and Asynchronous
vibration. In-Vacuum Dynamic Characterisation
OUR TURBOMACHINERY of mech damping for tuned and mistuned bladed-disks
EJ200 •••• GEnx-2B •••• Burner Rig in Brindisi
RB199 •••• GE90 •••• Mid/High temperature test (up to 2000K) on cooled
T700 •••• CF6 •••• airfoil cascade for cooling efficiency and thermal
LMS100 •••• Trent500 •••• fatigue measurements
PW308 •••• Leap •••• Shaker for blades HCF investigation:
GEnx-1B •••• CFM56 •••• multiple characteristic vibration loading up to 2kHz,
35 kN max load
• Modules Design Responsibility Laser holography system for component
• Submodules Design Responsibility modeshapes identification
• Components Design Responsibility
• Manufacturing

CONNECT WITH US OUR TURBOMACHINERY


PLANTS
turbomachinery@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero ARE LOCATED IN:

RIVALTA DI TORINO (ITALY) TURIN (ITALY) POMIGLIANO D’ARCO (ITALY) BRINDISI (ITALY) BIELSKO-BIALA (POLAND)
167,000 Sqm specialised in Design and Machining 12,000 Sqm specialised in Testing 78,000 Sqm specialised in CRO 50,900 Sqm specialised in MRO 78,000 Sqm specialised in Design and Machining
COMBUSTORS
COMBUSTORS

COMBUSTORS

ON BOARD WITH US
If you are looking for:
A reliable partner
Advanced design capabilities THEY’VE ALREADY CHOSEN US
A solutions provider General Electric Eurojet
International team support Rolls-Royce Snecma
A great design specialist and manufacturer Pratt&Whitney Italian Air Forces
Careful support for CRO activities Pratt&Whitney Canada Brazilian Air Forces

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
COMBUSTORS

COMBUSTORS TAKE A LOOK AT WHAT WE CAN DO BEHIND THE PRODUCTION PROCESS


Laser drilling with in process permeability control
ALL AROUND DESIGN Additive manufacturing
Fast sample production with rapid Dome forming simulation
manufacturing technology Complex shape forming
Consolidated research network Welding: EBW, GTAW, RSW
Parametric CAD generation Plasma spray coating
Detailed components optimisation Vacuum brazing
In-house 1D thermal analysis tool Machining
for fast concept design NDT: FPI, X-Ray, US
DID YOU KNOW? QDRV methodology:
Over 25 years of experience and a wide range of Quick-Design-Rapid-Validation TESTS & MEASUREMENTS
products that include the EJ200, PW100 and APU. From Consolidated design process In-house and research network complementary
for reliable components capabilities
business jets to regional and narrow body aircraft we
Different facility configurations for tubular and full
are certain that our expertise in design, manufacturing DISTINCTIVE TECHNOLOGIES annular combustor
and testing is a winning element if you are looking for a CoCrMo7 injection system by DMLS Tests at low pressure conditions
reliable partner and field support. Low emission technologies Tests at sub-atmosferic conditions
Patented injection system fuel feeding Aerodynamic, pressure drop test and exit velocity profile
We rely on leading-edge technologies to promptly Effusion cooling technologies Ignition & lean blow-out limits (LP and sub-atm.)
meet the demands of an ecofriendly aeroengine: our Pilot and main fuel staging to control stability, with video-recording system
engineers and highly specialised technicians offer full pressure fluctuations and emissions Emissions combustion test (LP, MP, HP)
support and we guarantee the quality of all our products Thermal barrier coating Thermal test
Water (liquid/vapor) injection test
and customer care services. Assembly and instrumentations with thermocouples,
pressure, strain gauges, rakes, dynamic transducers
Thermal paints
Visual, boroscopic and NDT inspections
Rig parts design & procurement
LDV flow field investigation
PDPA (spray characteristics)
IS Thermo-acoustics response analysis
OUR COMBUSTORS Liquid crystal method for heat transfer coef.
measurement
EJ200RH ••• APU 36-170 ••• Effusion cooling - acoustic interaction investigation
RB199 ••• APU ARGO FA 150 ••• Integration and combustor technology validation
SaM 146 ••• RB183 TAY •••
PT6A • •• PW100 •••
RE 220 •••

• Design Responsibility
• Manufacturing
• MRO

CONNECT WITH US OUR COMBUSTORS


PLANTS
combustors@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero ARE LOCATED IN:

POMIGLIANO D’ARCO (ITALY) BRINDISI (ITALY) CAMERI (ITALY)


78,000 Sqm specialised in Machining and CRO 50,900 Sqm specialised in MRO 2,400 Sqm specialised in Additive Manufacturing
SAND CASTING
SAND CASTING

SAND CASTING

ON BOARD WITH US
If you are looking for:
Gravity precision sand casting THEY’VE ALREADY CHOSEN US
aluminium and magnesium alloys General Electric
A reliable and experienced partner Alenia Agusta
Design capabilities Pratt&Whitney Alstom
A solutions provider Eurojet Eurocopter
International team support Hispano Suiza Techspace

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
SAND CASTING

SAND CASTING TAKE A LOOK AT WHAT WE CAN DO BEHIND THE PRODUCTION PROCESS
Gravity precision sand casting: aluminium
ALL AROUND DESIGN and magnesium alloys
Co-design with customer engineering Low turbolence casting: large and complex aluminium
Process simulation alloys castings with high quality requirements
Optimization of gating and feeding system Differential pressure sand casting: complex castings in
Metallurgical defect prediction highly reactive magnesium alloys
and real time defect resolution Moulding equipment for self-hardening
Tool concept definition, design sand moulds (Al/Mg)
and construction Blow machines for cores production (5 to 65lt)
DID YOU KNOW? UG and CATIA5 3D software Melting furnace (Al/Mg)
Our plant in Borgaretto - Beinasco (Turin) in Italy, a Fast sample production with rapid Stand by furnaces for aluminium casting
few kilometers from our Headquarters and machining prototyping technology Electrical ladle
Metallurgical and dimensional validation Shot blasting shake out machine
plant in Rivalta, is equipped to offer the technology
in accordance with customer specifications Thermal shake out oven
and capabilities to design and produce a wide quantity Heat treatment furnaces
of premium aluminium and magnesium castings of
different sizes for the aerospace and high performance Aluminium: A357 Be free (Fe 0,1%); A357; A356; C355
Magnesium: RZ5; QE22; WE43; Elektron 21
transport vehicle industries. From the turbofan GEnx
for B787 and 747-8 to the powerful turboprop TP400 in
aluminium and magnesium. Concurrent engineering,
co-design, process simulation, years of experience,
high quality and delivery on time is what we offer. Our
technologies and ability to work with you as a perfect
partner will leave you fully satisfied.

OUR CASTINGS

TP400 •• T700 •• PW800 ••


POWER GEARBOX ADT GEARBOX ADT GEARBOX
AS365 •• EUROFIGHTER •• PW1100 ••
MAIN GEARBOX AMAD GEARBOX MAIN GEARBOX
LM6000 •• TRENT900 •• PW1500 ••
ADT GEARBOX ADT GEARBOX MAIN GEARBOX
EC 175 •• SaM146 •• HYDRAULIC SYSTEMS ••
MAIN GEARBOX ADT GEARBOX OIL SYSTEMS
CF6 •• LM2500 •• EJ200 ••
ADT GEARBOX ADT GEARBOX MAIN GEARBOX
BR 710 •• V2500 ••
GEARBOX ADT GEARBOX
GEnx 2B •• PW4000 ••
ADT GEARBOX ADT GEARBOX

• Design Responsibility • Casting

CONNECT WITH US OUR SAND CASTING


PLANT
sandcasting@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero IS LOCATED IN:

BORGARETTO/BEINASCO (ITALY)
25,000 Sqm specialised in Sand Casting
ITIVE MANUFACT
ADDITIVE
MANUFACTURING

ADDITIVE MANUFACTURING

ON BOARD WITH US THEY’VE ALREADY CHOSEN US


Avio Aero is strongly active Agusta Westland
in the value chain Alenia Aermacchi
and controls the entire GE Oil&Gas
qualification process Selex

POWDER MATERIAL DEALER SYSTEM PART PRODUCTION PART FINISHING


MANUFACTURER
ADDITIVE
MANUFACTURING

ADDITIVE
MANUFACTURING TAKE A LOOK AT WHAT WE CAN DO

OUR PLANT
ALL AROUND DESIGN
Total freeform without design limits
(Design For Functionality instead of Design
We use two different technologies in our plant: for Manufacturing)
EBM (Electron Beam Melting) using an electron Production of pieces with undercuts
beam to melt the material and complex features difficult to produce
DMLS (Direct Metal Laser Sintering) using a laser with traditional production systems
beam source to melt the material Reduced project and manufacturing
times and costs
EBM As designers and producers we are able
DID YOU KNOW? Only applicable to electrical conductive materials to redesign your product and suggest
We offer proven leadership in Additive Manufacturing High Power (3 kW) more efficient and decisive solutions
processing, using DMLS (Direct Metal Laser Sintering) Relative hot process (700-1000°C)
Less stress, less distortion BEHIND THE PRODUCTION PROCESS
and EBM (Electron Beam Melting) technologies.
Fine microstructure In aviation, we design components such as TiAl turbine
A leading player in Europe as regards the use of these Better material properties blades for aircraft engines and deoilers. We have
technologies in the aerospace field. Under vacuum recently started working in the helicopter market,
We exclusively use ultra-light alloy TiAl (Titanium Recyclability of powders producing exhaust and intake ducts
No contamination Our portfolio includes examples of important supplies
Aluminide) with the EBM technology. For us, Additive Stable process to various OEM sub-contractors primarily fixed-wing
Manufacturing is already a process for mass production, Surface finishing c. Ra 15 µ and rotorcraft
not just prototyping. Our non-aeronautical customer portfolio is highly
We offer complete service, including designs in concurrent DMLS diversified: from the Oil & Gas sector to the Racing
Low Power (400W) segment (F1 and MOTO GP)
engineering, for custom-designed components produced Relative cold process (30-200°C)
using Additive Engineering technology. No vacuum (controlled atmosphere) ADVANTAGES
Rich material portfolio FREEDOM OF DESIGN
Surface finishing c. Ra 4 µ AM can produce an object of virtually any shape
Increasing object complexity will not increase
production costs
WEIGHT REDUCTION & PERFORMANCE
IMPROVEMENT
OUR PRODUCTS AM adds material only where it is needed
BLADES AM enables weight reduction via topological
DEOILERS optimization
DUCTS Integration of multiple part numbers in one
BURNERS COST REDUCTION
COILS Significant scrap rate reduction vs. traditional casting
AIRCRAFT STRUCTURES …lighter means cheaper
SPACE PROPULSION No vendor tooling
MECHANICAL PROPERTIES
Mechanical properties better than casting
LEAN MANUFACTURING
Lead Time reduction
WIP Optimisation

CONNECT WITH US OUR ADDITIVE


MANUFACTURING PLANT
additive@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero IS LOCATED IN:

CAMERI (ITALY)
2,400 Sqm specialised in Additive Manufacturing
MRO & CRO
MRO & CRO

MRO & CRO

ON BOARD WITH US
If you are looking for:
Careful support for MRO and CRO activities
A reliable partner
A solutions provider THEY’VE ALREADY CHOSEN US
International team support General Electric
A great design specialist and manufacturer Rolls-Royce Italian Air Force
we can develop and industrialize specific Pratt and Whitney Brazilian Air Force
repairs for your products Snecma Royal Netherlands Air Force

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
MRO & CRO

MRO & CRO OUR COMPETENCIES WELDING AND HEAT TREATMENT


IN THE MRO & CRO SECTORS Automatic tig welding
Automatic micro plasma welding
REPAIR CAPABILITIES Vacuum titanium welding chamber
Vacuum and air furnaces
SPECIAL PROCESSES
Plasma spray NON-DESTRUCTIVE TESTING
Thermal spray Eddy current
Wire spray Thermographic inspection
Cold spray Magnetic particle inspection
DID YOU KNOW? HVOF (Hyper Velocity Oxygen Fuel) Ultrasonic inspection
We are a reliable partner in all the activities we follow: PVD (Physical Vapor Deposition)
from design to delivery. We are national champions for Heat treatments OUR INTEGRATED LOGISTICAL SUPPORT PROVIDES
High pressure water jet stripping Configuration Control Management & Accounting
MRO activities in Italy and Brazil. EJ200, T700, Spey Mk
Shot peening OEM technical liaison
807 and LM2500 are just examples of the engines we Glass bead peening Investigation of errors and malfunctions
are responsible for. Grit blasting Obsolescence and supportability analysis
Our CRO activities revolve around the components we ESD (Electro Spark Deposition) Field and remote support
Thermal spray monitoring system (Accuraspray) Training centres
design and produce for the GEnx, GE90, Trent900 and Inorganic and organic painting Technical support
V2500 engines. Our engineers and highly specialised Sandblasting and stripping Technical publications
technicians are ready to support and guarantee the Tumbling Coordination of upgrades
quality of all our CRO and MRO activities. Laser cladding Spare parts and purchase forecasting
Super-polishing
We also offer Airlines support activities: get in touch Adjustments
with us to see how we can help. High-precision static and dynamic balancing

WE DO MRO
ON THE FOLLOWING ENGINES OUR CRO OFFER

EJ200 Spey Mk 807 GEnx V2500


AE2100 CT-7 Accessory Drive Train Accessory Gearbox
J85 T700 LPT (NGV and Case) Oil pump
LM2500 RB199 Oil tank Oil tank
Pegasus GE90 Trent 900
Accessory Drive Train Accessory Drive Train
LPT (Nozzle) Oil tank

CONNECT WITH US OUR MRO&CRO


PLANTS
mroandcro@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero ARE LOCATED IN:

POMIGLIANO D’ARCO (ITALY) BRINDISI (ITALY) PETROPOLIS (BRAZIL)


78,000 Sqm specialised in CRO 50,900 Sqm specialised in MRO 3,500 Sqm specialised in MRO
RAMES AND CASE
FRAMES AND CASES

FRAMES AND CASES

ON BOARD WITH US
If you are looking for:
A reliable partner
Advanced design capabilities
A solutions provider THEY’VE ALREADY CHOSEN US
International team support General Electric
A great design specialist and manufacturer Pratt&Whitney
Production of Casings and Frames CFM
with diameter 800 mm Snecma

SAND CASTING / YOUR


DESIGN ADDITIVE MANUFACTURING MANUFACTURING ASSEMBLY TESTING DELIVERY MRO & CRO TECHNOLOGY
PARTNER
FRAMES AND CASES

FRAMES
AND CASES TAKE A LOOK AT WHAT WE CAN DO

ALL AROUND DESIGN


BEHIND THE PRODUCTION PROCESS
CAD/CAM tool path design and simulation
Vertical Lathe
Components design and certification (turning diam. Allowed: from 400 to 2500 mm)
Parametric CAD generation Milling center
Detailed components optimisation (Milling capabilities: 5000*2000*1500 mm)
Multidisciplinary design approach Welding (TIG, EBW; Arco Plasma, Resistance Welding)
Heat transfer analyses capability Brazing, manual and in furnace
for thermal map assessment Automatic deburring robotic cell
Durability LCF assessment via 2D and 3D FEA Heat treatment (Under vacuum and air furnaces)
DID YOU KNOW? Buckling assessment via 3D FEA Surface treatment (Sand blasting, shoot peening)
Over 15 years of experience on machining processes of Creep and strength assessment via 2D / 3D FEA Hardness check
Superalloy (Inconel718, Waspaloy etc.) and production Validation via experimental tests Dryer station
Xray inspection (diam. 1000* 600 mm)
of LPT casings and frames. We are sure that our
FPI station
expertise in the design, manufacture and testing is a DISTINCTIVE TECHNOLOGIES Cleaning station
winning element that makes us an extremely reliable CAD/CAM Tool path Design and Simulation Flushing & checking residul contamination station
partner. Ultra High Pression Coolant (up 300 bar) CMM for dimensional & geometrical inspection
Automatic thickness measurement
with robotic ultrasonic sensor
Probe for automatic in-process measurements
and toolpath adjustment

OUR FRAMES AND CASES

LM6000 PW308 SaM146


REAR/FRONT FRAME •• LPT CASE • •• DIFFUSER CASE • ••
LM2500 LMS100 APU ARGO
REAR/FRONT FRAME ••• IPT MODULE ••• TURBINE HOUSING ••
LMS100 ARIANE 5 TEC • ••
FRONT FRAME ••• CONE, FIXED SUPPORT ••• T700
GEnx SLIDING SUPPORT •• TURBINE CASE •••
LPT CASE •• PW308 EXHAUST CASE ••
FAN HUB FRAME •• TEC •• FRAME PARTICLE SEP ••
CONTEINMENT RING ••
LEAP PW800
LPT CASE •• TEC ••

• Design Responsability
• Manufacturing

CONNECT WITH US OUR FRAMES AND CASES


PLANTS
framesandcases@avioaero.com - www.avioaero.com AvioAero @AvioAero AvioAero ARE LOCATED IN:

POMIGLIANO D’ARCO (ITALY) BRINDISI (ITALY)


78,000 Sqm specialised in Machining 54,000 Sqm specialised in Machining

You might also like