Professional Documents
Culture Documents
www.lg.com
P/NO : COV33593101
COV33593101 X41G32MV68907A
Important Safety Instructions Read these instructions.
Keep these instructions.
Always comply with the following precautions Heed all warnings.
to avoid dangerous situations and ensure peak Follow all instructions.
performance of your product.
••Do not use this apparatus near water.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
••Clean only with a dry cloth.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
••Do not block any ventilation openings. Install in
symbol within an equilateral triangle is
accordance with the manufacturer’s instructions.
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an ••Do not install near any heat sources such
equilateral triangle is intended to alert the as radiators, heat registers, stoves, or other
user to the presence of important operating apparatus (including amplifiers) that produce
and maintenance (servicing) instructions in heat.
ENGLISH
2
••Protect the power cord from being walked on ••CAUTION concerning the Power Cord
or pinched particularly at plugs, convenience (Can differ by country):
receptacles, and the point where they exit from Check the specification page of this owner’s
the apparatus. manual to be certain. Do not connect too many
appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
••Only use attachments/accessories specified by frayed power cords, or damaged or cracked
the manufacturer. wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
••Use only with a cart, stand, tripod, bracket, or appliance, and have the cord replaced with
table specified by the manufacturer, or sold with an exact replacement part by an authorized
the apparatus. When a cart is used, use caution service. Protect the power cord from physical or
when moving the cart/apparatus combination to mechanical abuse, such as being twisted, kinked,
avoid injury from tip-over. pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. Do
not move the TV with the power cord plugged
in. Do not use a damaged or loose power cord.
••Unplug this apparatus during lightning storms Be sure do grasp the plug when unplugging the
or when unused for long periods of time. power cord. Do not pull on the power cord to
unplug the TV.
ENGLISH
••Refer all servicing to qualified service personnel. ••Warning - To reduce the risk of fire or electrical
Servicing is required when the apparatus has shock, do not expose this product to rain,
been damaged in any way, such as power-supply moisture or other liquids. Do not touch the TV
cord or plug is damaged, liquid has been spilled with wet hands. Do not install this product near
or objects have fallen into the apparatus, the flammable objects such as gasoline or candles,
apparatus has been exposed to rain or moisture, or expose the TV to direct air conditioning.
does not operate normally, or has been dropped.
3
••Grounding ••Cleaning
(Except for devices which are not grounded.) When cleaning, unplug the power cord and wipe
Ensure that you connect the earth ground wire gently with a soft cloth to prevent scratching. Do
to prevent possible electric shock (i.e., a TV not spray water or other liquids directly on the
with a three-prong grounded AC plug must TV as electric shock may occur. Do not clean with
be connected to a three-prong grounded AC chemicals such as alcohol, thinners, or benzene.
outlet). If grounding methods are not possible, ••Moving
have a qualified electrician install a separate Make sure the product is turned off, unplugged,
circuit breaker. Do not try to ground the unit by and all cables have been removed. It may take 2
connecting it to telephone wires, lightning rods, or more people to carry larger TVs. Do not press
or gas pipes. or put stress on the front panel of the TV.
••Ventilation
Power
Install your TV where there is proper ventilation.
Circuit
Supply Do not install in a confined space such as a
Breaker
bookcase. Do not cover the product with cloth or
••As long as this unit is connected to the AC wall other materials while plugged. Do not install in
outlet, it is not disconnected from the AC power excessively dusty places.
source even if the unit is turned off. ••If you smell smoke or other odors coming from
••Do not attempt to modify this product in any the TV, unplug the power cord and contact an
way without written authorization from LG authorized service center.
Electronics. Unauthorized modification could ••If water or another substance enters the
void the user’s authority to operate this product. product (like an AC adapter, power cord, or TV),
••Outdoor Antenna Grounding disconnect the power cord and contact the
(Can differ by country): service center immediately. Otherwise, this may
If an outdoor antenna is installed, follow the result in fire or electric shock.
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
ENGLISH
4
••Handle the adapter carefully to avoid dropping ••Generated Sound
or striking it. An impact could damage the Cracking noise A cracking noise that occurs
adapter. when watching or turning off the TV is
generated by plastic thermal contraction due to
temperature and humidity. This noise is common
for products where thermal deformation is
required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a high-
speed switching circuit, which supplies a large
••Keep the product away from direct sunlight. amount of current to operate a product. It varies
••Never touch this apparatus or antenna during a depending upon the product. This generated
lightning storm. sound does not affect the performance and
••When mounting a TV on the wall, make sure not reliability of the product.
to install the TV by hanging the power and signal ••Take care not to touch the ventilation openings.
cables on the back of the TV. When watching the TV for a long period, the
••Do not allow an impact shock, any objects to fall ventilation openings may become hot. This does
into the product, and do not drop anything onto not affect the performance of the product or
the screen. cause defects in the product.
••DISCONNECTING THE DEVICE FROM THE ••Do not install this product on a wall if it could be
MAIN POWER exposed to oil or oil mist. This may damage the
The power plug is the disconnecting device. product and cause it to fall.
In case of an emergency, the power plug must ••If the TV feels cold to the touch, there may
remain readily accessible. be a small flicker when it is turned on. This is
••Batteries normal; there is nothing wrong with TV. Some
Store the accessories (battery, etc.) in a safe minute dot defects may be visible on the screen,
location out of the reach of children. appearing as tiny red, green, or blue spots.
ENGLISH
••This apparatus uses batteries. In your community However, they have no adverse effect on the TV’s
there might be regulations that require you performance. Avoid touching the LCD screen or
to dispose of these batteries properly due to holding your finger(s) against it for long periods
environmental considerations. Please contact of time. Doing so may produce some temporary
your local authorities for disposal or recycling distortion effects on the screen.
information.
••Do not dispose of batteries in a fire. Preventing Image Burn or Burn-in on Your
••Do not short circuit, disassemble, or allow the TV Screen
batteries to overheat.
••Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper.)
This may result in product malfunction.
••Dot Defect
The panel is a high technology product with
resolution of two million to six million pixels. ••Displaying a still image for a prolonged time may
In a very few cases, you could see fine dots on cause image sticking.
the screen while you’re viewing the TV. Those Avoid displaying a fixed image on the TV screen
dots are deactivated pixels and do not affect the for a long period of time.
performance and reliability of the TV.
5
WARNING! ••For an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm thick
Never place a television set in an unstable location. A television set and 18 mm width.
may fall, causing serious personal injury or death. Many injuries, ••Use an extension cable that supports USB 2.0 if
particularly to children, can be avoided by taking simple precautions the USB cable or USB flash drive does not fit into
such as: your TV’s USB port.
••Use a certified cable with the HDMI logo
• Using cabinets or stands recommended by the manufacturer of
attached. If you do not use a certified HDMI
the television set. cable, the screen may not display or a
• Only using furniture that can safely support the television set. connection error may occur.
• Ensuring the television set is not overhanging the edge of the ••Recommended HDMI cable types
supporting furniture. -- High-Speed HDMI®/™ cable
• Not placing the television set on tall furniture (for example, -- High-Speed HDMI®/™ cable with Ethernet
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
• Not placing the television set on cloth or other materials that
may be located between the television set and supporting B B
furniture.
• Educating children about the dangers of climbing on furniture to A A
reach the television set or its controls.
If your existing television set is being retained and relocated, the *A 10 mm
same considerations as above should be applied. *B 18 mm
CAUTION
Symbols ••Do not use any unapproved items to ensure the
safety and lifespan of the product.
••Any damages or injuries by using unapproved
ENGLISH
ENGLISH
damaged and for safe transportation regardless of
its type and size.
••It is recommended to move the TV in the box or
IN
7
Mounting on a Table 3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
(Image shown may differ from your TV) the rope parallel to the flat surface.
1 Lift and tilt the TV into its upright position on a
table. CAUTION
- Leave a 10 cm (minimum) space from the wall ••Make sure that children do not climb on or hang
for proper ventilation. on the TV.
NOTE
••Use a platform or cabinet that is strong and large
enough to support the TV securely.
10 cm ••Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
10 cm dealer.
10 cm
10 c
m
Mounting on a Wall
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
2 Connect the power cord to a wall outlet. used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
CAUTION floor. If you are attaching the TV to other building
ENGLISH
••Do not place the TV near or on sources of heat, materials, please contact qualified personnel to
as this may result in fire or other damage. install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
Securing the TV to a Wall mount is easy to adjust or to connect the cables.
(optional) When you do not use LG’s wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough space
(Depending upon model)
to allow connectivity to external devices. If you are
using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then
attach the TV to the mount.
10 cm
10 cm
10 cm
10 cm
1 Insert and tighten the eye-bolts or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first. Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
2 Mount the wall brackets with the bolts to the the wall mount kits are described in the following
wall. Match the location of the wall bracket and table.
the eye-bolts on the rear of the TV.
8
Model 32LH500B 43LH5000 VCR, make sure to connect the TV signal input
VESA (A x B) 100 x 100 200 x 200 cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
Standard screw M4 M6
the manual provided with the connected device.
Number of screws 4 4 ••The external device connections shown may
LSW240B differ slightly from illustrations in this manual.
Wall mount bracket LSW140B
MSW240 ••Connect external devices to the TV regardless
about the order of the TV port.
••If you connect a gaming device to the TV, use the
A cable supplied with the gaming device.
B ••Refer to the external equipment’s manual for
operating instructions.
Connecting to an Antenna or
CAUTION Cable
••Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur. Connect an antenna, cable, or cable box to watch
••Remove the stand before installing the TV on a TV while referring to the following. The illustrations
wall mount by performing the stand attachment may differ from the actual items and an RF cable is
in reverse. optional.
••If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an CAUTION
authorized LG wall mount and contact the local ••Make sure not to bend the copper wire of the RF
dealer or qualified personnel. When using a cable.
third-party wall mount, it is not covered by the
warranty.
ENGLISH
••Do not over tighten the screws as this may cause
damage to the TV and void your warranty. Copper wire
••Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not ••Complete all connections between devices, and
covered by the warranty. then connect the power cord to the power outlet
to prevent damage to your TV.
NOTE
••Use the screws that are listed in the VESA NOTE
standard screw specifications. ••To improve the picture quality in a poor signal
••The wall mount kit includes an installation area, purchase a signal amplifier.
manual and necessary parts. ••Use a signal splitter to use 2 TVs or more.
••The wall mount bracket is optional. You can ••If the antenna is not installed properly, contact
obtain additional accessories from your local your dealer for assistance.
dealer. ••DTV Audio Supported Codec: MPEG, AAC,
••The length of screws may differ depending upon
HE-AAC
the wall mount. Make sure to use the proper
length.
••For more information, refer to the manual Other Connections
supplied with the wall mount.
Connect your TV to external devices. For the best
Connections (Notifications) picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
You can connect various external devices to the TV. upon the model, a cable may not be provided.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For NOTE
more information on external device’s connection, ••HDMI Audio Supported Format:
refer to the manual provided with each device. DTS (44.1 kHz / 48 kHz),
AC3 (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192
NOTE kHz) (Depending upon model)
••If you record a TV program on a DVD recorder or
9
Remote Control
B
(Image shown may differ from your TV.)
The descriptions in this manual are based on the Number button Enters numbers.
buttons on the remote control. Please read this
manual carefully and use the TV correctly. To install - (Dash) I nserts a dash between numbers such
batteries, open the battery cover, replace batteries as 2-1 and 2-2.
(1.5 V AAA) matching the and ends to the label LIST Accesses the saved channel list.
inside the compartment, and close the battery cover.
Q. VIEW Alternates between the two
Failure to match the correct polarities of the battery
last channels selected (pressing
may cause the battery to burst or leak, resulting in repeatedly).
fire, personal injury, or ambient pollution. To remove
the batteries, perform the installation actions in VOL Adjusts the volume level.
reverse.
FAV Accesses your favorite programme.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s remote GUIDE Displays the program event according
to time scheduler.
sensor.
(Mute) Mutes all sounds.
A
ENGLISH
B D
A
(POWER) Turns the TV on or off. C
TV Returns to the last TV channel.
CAPTION Activates or deactivates the caption. PICTURE Changes the picture mode.
RATIO Resizes an image. SLEEP Sets the length of time until the TV to
turns off.
INFO Shows information on the current
SOUND Changes the sound mode.
program.
(Settings) Accesses the main menu.
(INPUT) Changes the input source.
Turns the TV on if it is off.
Q. MENU Accesses the quick menu.
10
Navigation (up/down/left/right) Scrolls through Watching TV
buttons menus or options.
OK Selects menus or options and confirms Turning the TV on for the first time
your input.
BACK Returns to the previous screen. When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
EXIT Clears all on-screen displays and and customize the basic settings.
returns to TV viewing.
1 Connect the power cord to a power outlet. The
ENGLISH
menus. Country
11
PICTURE settings red, or set to cool to see less intense colors with
more blue.
••Advanced Control Customizes the advanced
To use Energy Saving feature options.
-- Dynamic Contrast Adjusts the contrast to keep
(Settings) ➾ PICTURE ➙ Energy Saving it at the best level according to the brightness
Reduces power consumption by adjusting screen of the screen. The picture is improved by
brightness. making bright parts brighter and dark parts
••Off Turns off the Energy Saving mode. darker.
••Minimum / Medium / Maximum Applies the -- Dynamic Color Adjusts screen colors so that
pre-set Energy Saving mode. they look livelier, richer and clearer. This feature
••Screen Off Screen is turned off and only sound enhances hue, saturation and luminance so
is played. that red, blue and green white look more vivid.
Press any button expect Power button on the -- Gamma You can adjust brightness of dark area
remote control to turn the screen back on. and middle gray level area of the picture.
••Picture Option Adjusts detailed setting for
To select Picture Mode images.
-- Noise Reduction Eliminates noise in the
(Settings) ➾ PICTURE ➙ Picture Mode picture.
-- MPEG Noise Reduction Eliminates noise
Selects one of the preset image or customizes
generated while creating digital picture signals.
options in each mode for the best TV screen
-- Black Level Adjusts the brightness and
performance. You are also able to customize
contrast of the screen to suit the black level of
advanced options of each mode.
the input picture by using the blackness (black
••Preset Picture mode level) of the screen.
-- Vivid Adjusts the video image for the retail -- Real Cinema Optimizes the screen for movie
environment by enhancing the contrast, viewing.
ENGLISH
brightness, color, and sharpness. ••Picture Reset Restores the options of current
-- Standard Adjusts the image for the normal mode to the factory default.
environment. ••Aspect Ratio Changes the image size to view
-- ECO The TV sensor detects the ambient images at its optimal size.
lighting and automatically adjusts the screen -- 16:9 Resizes images to fit the screen width.
brightness. -- Just Scan Displays video images in the original
-- Cinema Optimizes the video images for a size without removing parts of the edge
cinematic look to enjoy movies as if you are in a of the image. (This function works in DTV/
movie theatre. Component/HDMI (720p / 1080i / 1080p)
-- Soccer Optimizes the video image for high and Mode.)
dynamic actions by emphasizing primary colors • If you select Just Scan, you may see image
such as white, grass, or sky blue. noises at the edge of the original signal.
-- Game Optimizes the video image for a fast -- Set by program When your TV receives a wide
gaming screen such as PCs or games. screen signal it will automatically change to the
••Backlight Adjusts the brightness of the screen picture format broadcasted.
by controlling the LCD backlight. If you decrease -- 4:3 Resizes images to the previous standard 4:3.
the brightness level, the screen becomes darker -- Zoom Formats an image to fit the screen width.
and the power consumption will be reduced The top and bottom of the image may not
without any video signal loss. appear.
••Contrast Increases or decreases the gradient of
the video signal. You may use Contrast when the
bright part of the picture is saturated. AUDIO settings
••Brightness Adjusts the base level of the signal in
the picture.
To use Sound Mode
••Sharpness Adjusts the level of crispness in the
edges between the light and dark areas of the (Settings) ➾ AUDIO ➙ Sound Mode
picture. The lower the level, the softer the image.
••Color Adjusts intensity of all colors. Adjusts TV audio to an optimal level according to a
••Tint Adjusts the balance between red and green selected sound mode.
levels. ••Standard Selects when you want standard-
••Color Temp. Adjusts the overall tone of the quality sound.
screen as desired. ••News Sets audio optimized for a specific genre.
Set to warm to enhance hotter colors such as ••Music Selects when you listen to music.
12
••Cinema Selects when you watch movies. select TV.
••Soccer Selects when you watch sports events. 2 Press the Navigation buttons to scroll to
••Game Selects when you play games.
Storage.
To select various sound effects 3 Press the Navigation buttons or Number
buttons to select the desired programme
(Settings) ➾ AUDIO ➙ Sound Effect number.
Selects various sound effects.
4 Press the Navigation buttons to scroll to
••Treble Controls the dominant sounds in the System.
output. When you turn up the treble, it will
increase the output to the higher frequency 5 Press the Navigation buttons to scroll to Band.
range. 6 Press the Navigation buttons to scroll to V/UHF
••Bass Controls the softer sounds in the output. or Cable.
When you turn up the bass, it will increase the
output to the lower frequency range. 7 Press the Navigation buttons to scroll to
••Balance Adjusts balance between the left Channel.
and right speakers according to your room 8 Press the Navigation buttons and then
environment. select the desired Channel number with the
••Reset Default Resets the audio mode to the Navigation buttons or Number buttons.
default setting.
9 Press the Navigation buttons to scroll to
To set AVL Search.
(Settings) ➾ AUDIO ➙ Auto Volume 10 Press the Navigation buttons to scroll and start
Searching.
Auto Volume maintains an equal volume level
automatically even if the channel is changed. 11 Press the OK to store it.
12 When you return to the previous menu, press
ENGLISH
CHANNEL settings BACK.
••To store another programme, repeat steps 1 to
11.
Automatically Setting Up Programme -- Assigning a station name
You can assign a station name with five characters
(Settings) ➾ CHANNEL ➙ Auto Tuning to each programme number.
Automatically tunes the programmes.
1 Press the Navigation buttons to scroll to Name.
••Auto Tuning Selects the input source to tune
programmes. 2 Press the Navigation buttons to scroll to select
1 Selects Country where the TV is used. the position and make your choice of the
Programme settings change depending on the second character, and so on. You can use the
country you choose. alphabet A to Z, the number 0 to 9, +/ -, and
blank and press OK.
2 Initiates Auto Tuning.
3 Press the OK to store it.
3 Selects Input Source of your choice.
4 When you return to the previous menu, press
4 Sets Auto Tuning following screen instructions. BACK.
••If Input Source is not connected properly,
programme registration may not work.
••Auto Tuning only finds programmes that are ••DTV settings
currently broadcasting. When selecting DTV input signal in Manual
••If Lock System is turned on, a pop-up window Tuning, you can view the on-screen signal strength
will appear asking for password. monitor to see the quality of the signal being
received.
To use Manual Tuning 1 Press the Navigation buttons(Left and Right) to
(Settings) ➾ CHANNEL ➙ Manual Tuning select DTV.
Adjusts programmes manually and saves the 2 Press the Navigation buttons to scroll to select
results. channel number you want to adjust.
••TV settings 3 Press the Navigation buttons to adjust
1 Press the Navigation buttons(Left and Right) to Frequency and Bandwidth.
13
4 Press the Navigation buttons to scroll to Add. OPTION settings
5 Press the OK to store it.
6 When you return to the previous menu, press To select the language
BACK.
(Settings) ➾ OPTION ➙ Language(Language)
To set the system color ••Language Selects a desired language.
-- Menu Language Selects a language for the
(Settings) ➾ CHANNEL ➙ System Color display text. (English / Spanish (default) /
Adjusts ATV or CATV system color setting. Portuguese)
ENGLISH
responsible for data loss.
15
My Media Supported Files
••Photo Support Formats
File Extension Color depth Max Resolution Min Resolution
*.jpg (Base-line) 24-bit 15360 x 8640 64 x 64
*.jpg (Progressive) 24-bit 1024 x 768 64 x 64
*.avi AVI MPEG2, MPEG4, DivX 3.11, DivX 4, DivX 5, DivX 6, XviD , H.264, VC1,
*.divx WMV3, MJPG
HE-AAC, AAC, E-AC3, AC3, LPCM, ADPCM, MP3
*.mp4 MP4 MPEG4, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, XviD , H.264, MJPG
AAC, MP3
*.mkv MKV H.264, MPEG1, MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6, XviD,
VC1, WMV3
HE-AAC, AC3, MP3, LPCM
*.mpg PS (Program Stream) MPEG1, MPEG2
*.mpeg AC3, MP3
Others (*.ts) TS (Transport Stream) MPEG2, H.264,
HE-AAC, AAC, E-AC3, AC3, MP3
16
To See the Web Manual HDMI (DTV) supported mode
Horizontal Vertical
Web manual allows you to easily access detailed TV Resolution
Frequency (kHz) Frequency (Hz)
information. 31.47 59.94
640 x 480p
Go to http://www.lg.com. 31.50 60.00
15.73 59.94
720 (1440) x 480i
Specifications 15.75
31.47
60.00
59.94
720 x 480p
31.50 60.00
Product specifications may be changed without
720 (1440) x 576i 15.63 50.00
prior notice due to upgrade of product functions.
720 x 576p 31.25 50.00
44.96 59.94
Television System 1280 x 720p 45.00 60.00
37.50 50.00
NTSC-M, PAL-M/N, ISDB-T 28.13 50.00
1920 x 1080i 33.72 59.94
Program Coverage 33.75 60.00
VHF 2-13, UHF 14-69, CATV 1-135 26.97 23.97
27.00 24.00
External Antenna Impedance 33.72 29.97
1920 x 1080p 33.75 30.00
75 Ω 56.25 50.00
67.43 59.94
Environment condition 67.50 60.00
ENGLISH
••Operating Temperature
0 °C to 40 °C
••Operating Humidity Component port connecting information
Less than 80 % Component ports on the TV Y PB PR
••Storage Temperature
-20 °C to 60 °C
Y PB PR
••Storage Humidity
Y B-Y R-Y
Less than 85 % Video output ports on DVD player
Y Cb Cr
Y Pb Pr
HDMI (PC) supported mode
Horizontal Vertical
Resolution
Frequency (kHz) Frequency (Hz) Component supported mode
720 x 400 31.46 70.08
640 x 480 31.46 59.94
Horizontal Vertical
800 x 600 37.87 60.31 Resolution
Frequency (kHz) Frequency (Hz)
1024 x 768 48.36 60.00 15.73 59.94
1280 x 720 45.00 60.00 720 (1440) x 480i
15.75 60.00
1360 x 768 47.71 60.01 31.47 59.94
1 720 x 480p
1366 x 768 47.71 59.79 31.50 60.00
2 1280 x 1024 63.98 60.02 720 (1440) x 576i 15.63 50.00
1920 x 1080 67.50 60.00 720 x 576p 31.25 50.00
37.50 50.00
1 Only for 32LH500B 1280 x 720p 44.96 59.94
2 Only for 43LH5000 45.00 60.00
28.13 50.00
1920 x 1080i 33.72 59.94
33.75 60.00
56.25 50.00
1920 x 1080p 67.43 59.94
67.50 60.00
17
Troubleshooting Licenses
••Cannot control the TV with the remote control. Supported licenses may differ by model.
-- Check if anything such as tape has been placed For more information about licenses,
over the receiver. visit www.lg.com.
-- Check if there is any obstacle between the
product and the remote control.
-- Replace the batteries with new fresh ones.
••No image display and no sound is produced. Manufactured under license from Dolby
-- Check if the product is turned on. Laboratories.
-- Check if the power cord is connected to a wall Dolby and the double-D symbol are trademarks
outlet. of Dolby Laboratories.
-- Check if there is a problem in the wall outlet by
connecting other products.
••The TV turns off suddenly.
-- Check the power control settings. The terms HDMI and HDMI High-Definition
The power supply may be interrupted. Multimedia Interface, and the HDMI logo are
-- Check if the Off Time / Sleep Timer feature is trademarks or registered trademarks of HDMI
activated in the TIME settings. Licensing LLC in the United States and other
-- If there is no signal while the TV is on, the TV countries.
will turn off automatically after 15 minutes of
inactivity.
18
The model and serial numbers of the TV are located
on the back and on one side of the TV. Record them
below should you ever need service.
MODEL
SERIAL
MANUAL DEL PROPIETARIO
Seguridad y referencia
Televisor LED*
* Los televisores LED LG son televisores LCD con
retroiluminación LED.
www.lg.com
No. de parte: COV33593101
Instrucciones de Seguridad Lea estas instrucciones.
Conserve estas instrucciones.
Importantes Preste atención a las advertencias.
Siga todas las instrucciones.
Siga siempre estas instrucciones para evitar
situaciones peligrosas y garantizar el rendimiento
máximo del producto.
••No use el aparato cerca del agua.
ADVERTENCIA/PRECAUCIÓN
RIESGO DE CHOQUE
ELECTRICO NO ABRIR
PARA REDUCIR EL RIESGO DE DESCARGAS ••Limpie únicamente con un paño seco.
ELÉCTRICAS, NO QUITE LA CUBIERTA (O LA
PARTE POSTERIOR). EL USUARIO NO PUEDE
CAMBIAR NI REPARAR LOS COMPONENTES
INTERNOS. CONSULTE ÚNICAMENTE AL
PERSONAL DE SERVICIO CALIFICADO. ••No tape ni bloquee las aberturas de ventilación.
Realice la instalación siguiendo las instrucciones
El símbolo de relámpago con una punta del fabricante.
de flecha, dentro de un triángulo
equilátero, tiene como fin alertar al usuario
sobre la presencia en el producto de voltaje
peligroso sin aislar que puede tener la
potencia suficiente para presentar riesgo de ••No instale el producto cerca de fuentes de calor
descargas eléctricas a los usuarios. como radiadores, rejillas de calefacción central,
estufas u otro tipo de aparatos que emitan calor
El signo de admiración dentro de un (incluidos los amplificadores).
triángulo equilátero tiene el fin de alertar
al usuario sobre la presencia de instrucciones
importantes de funcionamiento y de
mantenimiento (servicio) en el folleto que
acompaña al equipo.
••No anule el propósito de seguridad del enchufe
ESPAÑOL
2
••Asegúrese de que el cable de alimentación ••PRECAUCIÓN con respecto al cable de
esté protegido para evitar que lo pisen o alimentación (puede variar según el país):
aplasten, especialmente en los enchufes, los Consulte la página de especificaciones en el
tomacorrientes o el punto de salida desde el manual del usuario. No conecte demasiados
aparato. aparatos a la misma toma de ca, dado que
podría provocar incendios o descargas eléctricas.
No sobrecargue los tomacorrientes de la
pared. Asegúrese de que los tomacorrientes
de la pared no estén sobrecargados, sueltos ni
••Use únicamente los accesorios recomendados dañados, y que las extensiones, los cables de
por el fabricante. alimentación y el aislamiento de los cables no
estén desgastados, ya que estas condiciones
son peligrosas. Cualquiera de estos casos podría
provocar incendios o descargas eléctricas.
Examine regularmente el cable del aparato;
••Use el producto únicamente en mesas portátiles, si le parece que está dañado o deteriorado,
pies, trípodes, soportes o mesas indicados por el desenchúfelo y no use más ese cable. Llame al
fabricante o provistos con el aparato. Al emplear personal de servicio técnico autorizado para
una mesa portátil, tenga cuidado al moverla con que lo reemplace por uno exactamente igual.
el aparato encima, para evitar daños por caídas. Proteja el cable de alimentación de daños físicos
o mecánicos, es decir, que no se tuerza, doble,
deforme, que no quede atrapado al cerrar
una puerta y que no lo pisen. Preste especial
atención a los enchufes, tomacorrientes de
••Desenchufe el aparato durante tormentas la pared y al punto de salida del cable en el
eléctricas o si no planea usarlo durante un aparato. No mueva el televisor con el cable
periodo prolongado. de alimentación enchufado. No use un cable
de alimentación que esté suelto o dañado. Al
desenchufar el cable, asegúrese de hacerlo
desde el enchufe. No tire del cable para
desenchufar el televisor.
••Consulte todas las preguntas sobre
mantenimiento al personal de servicio calificado.
El servicio es necesario cuando el aparato sufre
••Advertencia - para disminuir los riesgos de
ESPAÑOL
algún tipo de daño, por ejemplo, cuando un
cable de suministro eléctrico o un conector incendio o descargas eléctricas, no exponga el
está dañados, se derrama un líquido o se cae un producto a la lluvia, la humedad u otro tipo de
objeto sobre el aparato, el aparato se expone a líquidos. No toque el televisor con las manos
la lluvia o a la humedad, no funciona en forma mojadas. No instale el producto cerca de objetos
normal o sufre una caída. inflamables como combustible o velas, ni lo
exponga al aire acondicionado de manera directa.
3
••Puesta a tierra ••Limpieza
(Excepto dispositivos sin conexión a tierra.) Al efectuar la limpieza, desenchufe el cable de
Asegúrese de que el cable de puesta a tierra alimentación y limpie suavemente con un paño
esté conectado para evitar descargas eléctricas suave para no rayar la superficie. No rocíe agua
(es decir, un televisor con un enchufe de ca de ni otros líquidos directamente sobre el televisor,
tres clavijas debe conectarse a un tomacorriente dado que podría provocar una descarga
de ca con puesta a tierra de tres clavijas). Si eléctrica. No limpie con productos químicos
no puede colocarse ninguna puesta a tierra, como alcohol, diluyentes o bencina.
solicite a un electricista calificado que instale ••Traslados
un disyuntor. No intente improvisar una puesta
Asegúrese de que el aparato esté apagado,
a tierra con conexiones a cables de teléfono,
pararrayos o tuberías de gas. desenchufado y que no quede ningún cable
conectado. Es posible que se necesiten dos
personas para trasladar los televisores de gran
Alimentación tamaño. No ejerza presión ni empuje el panel
Interruptor
diferencial frontal del televisor.
••Ventilación
••Mientras la unidad esté conectada al
tomacorriente de ca de la pared, no se Instale el televisor en un lugar bien ventilado.
desconectará de la fuente de alimentación de ca, No lo coloque en un lugar cerrado como, por
aún cuando el aparato esté apagado. ejemplo, un estante para libros. No cubra el
••No intente modificar este producto de ninguna producto con telas ni ningún otro material
manera sin autorización previa por escrito de LG mientras esté enchufado. No lo instale en lugares
Electronics. Cualquier tipo de modificación sin con demasiado polvo.
autorización previa podría anular la autoridad ••Si huele humo u otros olores que provienen
del usuario para usar el producto. de la TV, desconecte el cable de alimentación
••Puesta a tierra con una antena exterior y comuníquese con un centro de servicio
(puede variar según el país): autorizado.
Si instala una antena exterior, tome las siguientes ••Si el agua u otra sustancia entran en el
precauciones. No se debe instalar el sistema producto (como un adaptador de CA, cable de
de antena exterior cerca de las líneas aéreas de alimentación, o la TV), desconecte el cable de
transmisión de energía, de ningún circuito o alimentación y comuníquese inmediatamente
luz eléctrica, ni en ningún lugar donde pudiera con el centro de servicio. No hacerlo podría
entrar en contacto con este tipo de cables provocar un incendio o una descarga eléctrica.
eléctricos o circuitos, dado que podría provocar
daños graves o incluso la muerte. Asegúrese
ESPAÑOL
4
••Maneje el adaptador cuidadosamente para ••Reproducción de ruidos
evitar dejarlo caer o golpearlo. Un golpe podría Crujidos es posible que se produzcan crujidos
dañar el adaptador. cuando esté mirando televisión o al apagar el
televisor; se trata de un ruido generado por la
contracción térmica del plástico debido a la
temperatura y la humedad. Este ruido es común
en productos donde se requiere la deformación
térmica.
Zumbidos en el circuito eléctrico o el panel
••Mantenga el aparato alejado de la luz solar se trata de un ruido de bajo nivel, generado por
directa. un circuito de conmutación de alta velocidad,
••Nunca toque el aparato o la antena durante una que suministra una gran cantidad de corriente
tormenta eléctrica o con truenos. para que un producto pueda funcionar. Varía
••Al montar el televisor en la pared, asegúrese de según cada producto. Este ruido no afecta el
que los cables de alimentación y de señal no rendimiento ni la fiabilidad del producto.
queden colgando en la parte posterior. ••Tenga cuidado de no tocar las aberturas de
••No permita que se golpee el producto o que ventilación. Al mirar televisión durante largos
algún objeto caiga dentro de él, ni que se golpee periodos, las aberturas de ventilación pueden
la pantalla. calentarse. Esto no afecta el rendimiento ni causa
••DESCONEXIÓN DEL DISPOSITIVO DE LA defectos en el producto.
ALIMENTACIÓN PRINCIPAL ••No instale este producto en una pared que esté
El enchufe de alimentación se desconecta del expuesta a aceite o vapor de aceite. Esto podría
dispositivo. En caso de una emergencia, el dañar el producto y hacer que se caiga.
enchufe debe estar siempre accesible. ••Si siente que el televisor está frío al tocarlo,
••Baterías es posible que ocurra un pequeño parpadeo
Guarde los accesorios (baterías, etc.) en un lugar cuando lo prenda. Se trata de algo normal y no
seguro lejos del alcance de los niños. significa que el televisor esté dañado. También
••Este aparato usa baterías. Puede ser que en su es posible que aparezcan pequeños puntos en la
comunidad existan normativas que requieren pantalla, de color rojo, verde o azul. Sin embargo,
que deseche estas baterías de forma correcta no afectan el rendimiento del televisor. No toque
debido a las consideraciones ambientales. la pantalla LCD ni coloque los dedos sobre ella
Póngase en contacto con la autoridad local durante mucho tiempo. Esto podría producir
para obtener información acerca del desecho o algunos efectos de distorsión temporales en la
ESPAÑOL
reciclaje. pantalla.
••No deseche las baterías en el fuego.
••No provoque cortes de circuitos, desarme ni
Cómo evitar el efecto de degradación de la
permita que las baterías se sobrecalienten imagen por sobreexposición o quemadura
••No utilice equipo de alto voltaje cerca del TV, de pantalla del televisor
(por ejemplo, repelente eléctrico de insectos).
Esto puede causar que el producto funcione mal.
••Aparición de puntos
El panel es un producto de alta tecnología con
una resolución de entre dos y seis millones de
píxeles. En raras ocasiones, es posible que note
la presencia de pequeños puntos en la pantalla ••Mostrar una imagen fija durante un tiempo
mientras mira televisión. Estos puntos son prolongado puede provocar que la imagen
píxeles desactivados y no afectan el rendimiento quede marcada en la pantalla.
ni la fiabilidad del televisor. Evite mostrar una imagen fija en la pantalla del
televisor durante un largo período de tiempo.
5
AVISO! Preparación
Nunca coloque uma televisão num local instável.
A televisão pode cair, causando ferimentos pessoais NOTA
graves ou morte. É possível evitar várias lesões, ••La imagen puede ser diferente a la de su televisor.
particularmente em crianças, se forem tomadas ••El OSD (On Screen Display, Despliegue En la
Pantalla) de su TV puede ser un poco diferente al
algumas medidas de precaução simples como:
de este manual.
• Utilizar armários ou suportes recomendados ••Los menús y las opciones disponibles pueden
pelo fabricante da televisão. variar según la fuente de entrada que utilice.
• Utilizar apenas mobília capaz de suportar a ••Es posible que se agreguen nuevas funciones
televisão em segurança. a este televisor en el futuro.
• Certificar-se de que a televisão não está no ••Los artículos suministrados con el producto
limite do móvel de suporte. adquirido pueden variar según el modelo.
• Não colocar a televisão em móveis altos (por ••Es posible que cambien las especificaciones
exemplo, armários ou estantes) sem fixar o del producto o el contenido del manual sin
móvel e a televisão a um suporte adequado. previo aviso debido a las actualizaciones de las
funciones del producto.
• Não colocar a televisão sobre tecido ou outros
••Para que la conexión sea óptima, los cables
materiais que possam ficar entre a televisão e o
HDMI y los dispositivos USB tienen que tener
móvel de suporte. biseles que no superen los 10 mm de espesor
• Ensinar às crianças os perigos de subir para a y 18 mm de ancho.
mobília para chegar à televisão ou aos botões ••Utilice un cable de extensión que sea compatible
de controlo. con USB 2.0, en caso de que el cable USB o la
Se a sua televisão existente for colocada num tarjeta de memoria USB no encajen en el puerto
suporte ou deslocada, deve aplicar as mesmas USB del TV.
considerações acima mencionadas. ••Utilice un cable certificado con el logotipo
de HDMI adjunto. Si no utiliza un cable HDMI
Símbolos certificado, es posible que la pantalla no muestre
imágenes o que ocurra un error de conexión.
••Tipos de cable HDMI recomendados
- Cable HDMI®/ TM de alta velocidad
Refere-se à corrente alternada (CA).
- Cable HDMI®/ TM de alta velocidad con Ethernet
ESPAÑOL
6
Manteimiento Levantar y trasladar el televisor
Si desea levantar o trasladar el televisor, lea las
Limpieza del televisor instrucciones a continuación para no rayar o
dañar el aparato, y para transportarlo de forma
Limpie regularmente el televisor para que siga segura, independientemente del tamaño o tipo de
funcionando con el máximo rendimiento y para aparato.
extender la vida útil del producto.
••Se recomienda trasladar el televisor en la caja o
el material de empaque en el que lo recibió al
PRECAUCIÓN comprarlo.
••Antes de proceder con la limpieza, apague el ••Antes de mover o levantar el televisor,
equipo y desconecte el cable de alimentación desconecte el cable de alimentación y el resto de
y todos los cables. los cables.
••Cuando deje el TV desatendido o no lo utilice
durante mucho tiempo, desconecte el cable de ••Cuando sostenga el televisor, la
alimentación de la toma de corriente para evitar pantalla debe quedar alejada de
posibles daños por descargas o sobrecargas de usted para evitar algun daño.
energía.
••Sostenga con firmeza la parte superior e
Pantalla, marco, gabinete y base inferior del marco del televisor. Asegúrese de
Para quitar el polvo o la suciedad leve, pase un no sostenerlo por la parte transparente, por la
paño seco, limpio y suave por la superficie. bocina o por el área de rejillas de las bocinas.
Para eliminar suciedad de mayor importancia,
limpie la superficie con un paño suave
humedecido con agua limpia o un detergente
suave diluido. Después, pase de inmediato un
paño seco.
PRECAUCIÓN
••No ejerza presión, restriegue ni golpee la
superficie con las uñas o un objeto punzante,
ESPAÑOL
dado que puede rayar la pantalla y producir
distorsiones en la imagen. ••Se requieren al menos dos personas
••No utilice sustancias químicas (como para mover un televisor grande.
ceras, bencina, alcohol, tíner, insecticidas, ••Al transportar el televisor con las
desodorantes ambientales o lubricantes) dado manos, sosténgalo como se indica
que pueden dañar el acabado de la pantalla y en esta ilustración.
causar decoloración. ••Al transportar el televisor, no lo someta a
••No rocíe líquido sobre la superficie. Si entra sacudidas o vibración excesiva.
agua en el televisor, puede ocasionar incendios, ••Al transportar el televisor manténgalo en
descargas eléctricas o mal funcionamiento. posición vertical, nunca lo apoye sobre uno de
los costados, ni lo incline hacia la derecha o la
Cable de alimentación izquierda.
7
Encender o apagar el televisor Fijar el televisor a la pared
(opcional)
(Según el modelo)
IN
10 cm
NOTA
••Utilice una plataforma o un armario que sea lo
10 cm
suficientemente fuerte y grande para sostener el
10 cm
televisor de manera segura.
m ••Los soportes, los tornillos y los cordones son
10 c
opcionales. Puede solicitar otros accesorios a
través de su distribuidor local.
PRECAUCIÓN
••No colocar el televisor cerca de fuentes de calor,
puede sufrir quemaduras u otros daños.
8
Montar en la pared PRECAUCIÓN
••Antes de mover o instalar el televisor, desconecte
Se puede usar un soporte de pared opcional el cable de alimentación. De lo contrario, podría
con el televisor LG. Consulte al distribuidor local provocar una descarga eléctrica.
para adquirir un soporte de pared que cumpla ••Antes de montar el televisor en la pared, retire la
con el estándar VESA que usa su modelo de TV. base, realizando la instalación de ésta en orden
Cuidadosamente coloque el soporte de pared inverso.
en la parte posterior del TV. Instale el soporte de ••Si instala el televisor en el techo o en una pared
pared en una pared sólida, perpendicular al piso. inclinada, podría caerse y provocar lesiones
Si va a instalar el TV sobre otros materiales de graves. Utilice un soporte de pared autorizado
construcción, póngase en contacto con personal por LG y comuníquese con el distribuidor local
técnico calificado para instalar el soporte de o con personal técnico calificado. Cuando usa un
pared. El soporte de pared incluirá instrucciones soporte de pared de otro fabricante, este no es
detalladas. Recomendamos que use un soporte de cubierto por la garantía.
pared de marca LG. El soporte de pared LG hace ••No ajuste excesivamente los tornillos, dado que
que sea fácil ajustar o conectar los cables. Cuando podría dañar el televisor y anular la garantía.
no utilice el soporte de montaje de pared LG, por ••Utilice tornillos y soportes de pared que cumplan
favor, utilice un soporte de montaje de pared en con la norma VESA. La garantía no cubre daños
el que el dispositivo esté debidamente sujeto a ni lesiones provocados por el uso incorrecto del
la pared con el espacio suficiente para permitir la aparato o de accesorios no autorizados.
conectividad con dispositivos externos. Si utiliza
un soporte no ajustable, instale el soporte en la
pared. Primero, conecte los cables a la TV, luego NOTA
instale la TV en el soporte. ••Utilice los tornillos listados en las
especificaciones del estándar VESA.
••El conjunto de montaje de pared incluye un
manual de instalación y las piezas necesarias.
••El soporte de pared es opcional. Puede adquirir
10 cm accesorios adicionales con el distribuidor local.
••La longitud de los tornillos puede variar según el
tipo de soporte de pared. Asegúrese de utilizar la
10 cm longitud adecuada.
10 cm ••Para obtener más información, consulte el
ESPAÑOL
manual suministrado con el montaje de pared.
10 cm
A
B
9
Conexiones (Notificaciones) NOTA
••Para mejorar la calidad de la imagen en una zona
Se pueden conectar dispositivos externos al TV. Los con poca señal, compre un amplificador de señal.
dispositivos externos compatibles son: receptores ••Utilice un divisor de señal para usar
de HD, reproductores de DVD, VCR, sistemas de 2 televisores o más.
audio, dispositivos de almacenamiento USB, PC, ••Si la antena no está instalada correctamente,
dispositivos de juegos, etc. Para más información póngase en contacto con su distribuidor para
acerca de la conexión de dispositivos externos, obtener ayuda.
diríjase al manual que viene con cada dispositivo. ••Códec compatible con Audio DTV: MPEG, AAC,
HE-AAC
NOTA
••Si graba un programa de TV en una grabadora Otras conexiones
de DVD o VCR, asegúrese de conectar el cable
de entrada de señal al televisor a través una Puede conectar su TV a dispositivos externos. Para
grabadora de DVD o VCR. Para obtener más tener una mejor calidad de imagen y audio, conecte
información acerca de la grabación, consulte el dispositivo externo y el televisor con el cable
el manual proporcionado con el dispositivo HDMI tal como se muestra.
conectado.
••Las conexiones de dispositivos externos que se
muestran pueden ser levemente diferentes de las NOTA
ilustraciones en este manual. ••Formato de audio HDMI compatible:
••Conecte los dispositivos externos al televisor DTS (44,1 kHz / 48 kHz),
independientemente del orden del puerto del AC3 (32 kHz / 44,1 kHz / 48 kHz),
aparato. PCM (32 kHz / 44,1 kHz / 48 kHz / 96 kHz / 192 kHz)
••Si conecta un dispositivo de juego al televisor, (Según el modelo)
utilice el cable provisto con un dispositivo de
juego.
••Consulte el manual del equipo externo para ver las
Control remoto
instrucciones de funcionamiento.
(La imagen puede ser diferente a la de su televisor.)
Las descripciones en este manual se basan en los
Conexión de una antena o un botones en el control remoto. Lea atentamente
ESPAÑOL
10
PRECAUCIÓN
••No mezcle pilas viejas y nuevas, ya que esto
puede dañar el control remoto.
C
A
D
B
C
A
PICTURE Cambia el modo de imagen.
(ENCENDIDO) Enciende o apaga el televisor. SLEEP Establece el intervalo de tiempo para
Regresa al último canal de televisión visto. que se apague el televisor.
SOUND Cambia el modo de audio.
Activa o desactiva los subtítulos.
(Ajustes) Accede al menú principal.
RATIO Cambia el tamaño de la imagen.
ESPAÑOL
Q. MENU Accede al menú rápido.
INFO Muestra información sobre el programa
Botones de (arriba/abajo/izquierda/derecha)
actual.
navegación Permiten desplazarse a través de los
(ENTRADAS) Cambia la fuente de entrada. menús y opciones.
Enciende el televisor si está apagado.
OK Selecciona menús u opciones y confirma
su selección.
B BACK
EXIT
Vuelve a la pantalla anterior.
Borra todas las visualizaciones en
pantalla y regresa a la televisión.
Botón de número Permite introducir números.
- (Guión) I nserta un guión entre los números,
por ejemplo 2-1 y 2-2.
D
LIST Accede a la lista de canales guardados.
Q. VIEW Alterna entre los dos últimos canales Optimiza los ajustes de imagen y sonido
seleccionados (pulsar repetidamente). para el fútbol.
VOL Ajusta el nivel de volumen. SAP / ATV: Mono/Stereo/SAP/
FAV Permite acceder a su programa favorito. DTV: (detección automática del canal de
audio de transmisión actual)
GUIDE Muestra la guía de horarios de programas.
Botones de ( )
(Silenciar) Silencia todos los sonidos. control
Controla los menús MULTIMEDIA y USB.
CH Se desplaza a través de los canales
Botones de ( : Rojo, : Verde, : Amarillo,
guardados.
colores : Azul).
PAGE Se desplaza a la pantalla anterior
o siguiente. Acceden a funciones especiales en
algunos menús.
11
Visualización de televisión vez que se encienda el televisor.
••Desconecte el cable de alimentación de la toma
de corriente cuando no vaya a utilizar el televisor
Encendido del televisor por primera vez durante un período prolongado.
5 Para apagar el televisor, presione el botón de
Cuando encienda el televisor por primera vez, encendido en el control remoto.
aparecerá la pantalla de ajustes inicial. Seleccione
un idioma y personalice los ajustes básicos.
1 Conecte el cable de alimentación a una toma Ajustes de IMAGEN
de corriente. El indicador de alimentación se
encenderá en color rojo y el televisor pasará al Para utilizar la función de ahorro de energía
Modo en espera.
2 En el Modo en espera, presione el botón de (Configuración) ➾ IMAGEN ➙ Ahorro de
encendido del control remoto o la tecla local energía
para encender el televisor. Si enciende el Reduce el consumo de energía ajustando el brillo
televisor por primera vez, aparecerá la pantalla de la pantalla.
de ajustes inicial. ••Apagado Desactiva el modo de ahorro de energía.
NOTA ••Mínimo / Medio / Máximo Se aplica el ajuste
••También puede acceder a la Configuración predefinido del modo de ahorro de energía.
Inicial desde OPCIÓN en el menú principal. ••Apagado de Pantalla La pantalla se apaga
y solo se reproduce el sonido.
3 Siga las instrucciones que aparecen en pantalla Pulse cualquier botón excepto el botón de
para personalizar los ajustes del televisor según encendido del control remoto para volver
sus preferencias. a encender la pantalla.
Permite seleccionar un Para seleccionar el Modo de imagen
Idioma idioma para mostrar.
(Configuración) ➾ IMAGEN ➙ Modo de
imagen
Permite seleccionar un
País país. Selecciona una de las opciones de imagen
predefinidas o personaliza opciones en cada modo
para obtener el mejor rendimiento de la pantalla
ESPAÑOL
ESPAÑOL
alta.
-- Reducción ruido MPEG Elimina el ruido ••Graves Controla los sonidos más suaves de la
generado durante la creación de señales de salida. Cuando aumenta el nivel de los graves,
imagen digital. aumenta la salida a la gama de frecuencia más
-- Nivel de negro Ajusta el brillo y el contraste baja.
de la pantalla para adaptarse al nivel de negro ••Balance Ajusta el balance entre los altavoces
de la imagen de entrada utilizando la negrura izquierdo y derecho según el ambiente de la
(nivel de negro) de la pantalla. habitación.
-- Cine real Optimiza la pantalla para ver películas. ••Restablecer valores predeterminados
••Restablecer imagen Restablece las opciones Restablece el modo de audio a la configuración
del modo actual a los valores predeterminados predeterminada.
de fábrica.
••Relación de aspecto Cambia el tamaño de la Para establecer AVL
imagen para ver las imágenes en su tamaño
óptimo. (Configuración) ➾ AUDIO ➙ Volumen
-- 16:9 Cambia el tamaño de las imágenes para automático
que se ajuste al ancho de la pantalla. El volumen automático mantiene un nivel de
-- Original Muestra las imágenes de video en el volumen igual incluso si se cambia el canal.
tamaño original sin eliminar partes del borde
de la imagen. (Esta función es compatible
con el modo DTV/Componente/HDMI
[720p/1080i/1080p]).
• Si selecciona Original, puede ver ruidos de
imagen en el borde de la señal original.
-- Establecido por el programa Cuando
el televisor reciba una señal de pantalla
panorámica, se cambiará automáticamente el
13
Ajustes de CANAL 9 Pulse los botones de navegación para
desplazarse a Buscar.
14
-- Si no pulsa ningún botón durante 2 horas Cambie Subtítulo a Encendido y seleccione los
después de que el televisor se enciende con la ajustes de subtítulo.
función Hora de encendido, el televisor pasa a ••Modo
modo de espera automáticamente. -- CC 1-4 (subtítulos) /
-- Si establece las funciones Hora de apagado y Hora Texto 1-4 Muestra la parte de audio de un
de encendido con la misma hora, la función Hora programa de televisión como texto en la
de apagado anula la función Hora de encendido. pantalla del televisor. CC1 es el modo que se
-- Temporizador Establece el intervalo de tiempo usa más comúnmente.
hasta que se apague el televisor. Cuando apague -- Digital Solo está disponible para el sistema de
el televisor y vuelva a encenderlo, la función emisión digital.
Temporizador estará ajustada en Apagado.
-- Zona horaria La hora del televisor se ajusta Para seleccionar el país
en París (GMT +1) cuando la hora se ajusta
automáticamente con una señal digital. (Ajuste) ➾ OPTION ➙ País
Permite definir el país que utiliza el televisor.
-- Si se cambia el ajuste de país, puede que la
Ajustes de BLOQUEAR información de Sintonización automática
aparezca en la pantalla.
(Configuración) ➾ BLOQUEAR -- El ajuste de Modo de imagen cambia según el
••Fijar contraseña Cambia la contraseña de país seleccionado.
4 dígitos. El PIN predeterminado es "0 0 0 0".
••Bloquear Activa o desactiva el bloqueo del Para configurar Mis medios
sistema de bloqueo. (Configuración) ➾ OPCIÓN ➙ DivX(R) VOD
-- Bloquear canales Bloquea los programas
con contenido inadecuado para los niños ••Registro Comprueba el código de registro de
presionando el botón azul. Aparece un icono de DivX para reproducir vídeos protegidos de DivX.
candado delante de los programas bloqueados. Registro en http://vod.divx.com. Utilice el código
Los programas se pueden seleccionar, pero la de registro para alquilar o comprar películas en
pantalla aparece en blanco y el audio se silencia. www.divx.com/vod.
-- Guía para padres Esta característica funciona -- Los archivos DivX alquilados o comprados no
de acuerdo a la información de la emisora. Por se pueden reproducir si se usa el código de
lo tanto, si la señal tiene información incorrecta, registro de DivX de otro dispositivo. Utilice solo
esta característica no funciona. Impide que el código de registro de DivX otorgado a este
ESPAÑOL
los niños vean determinados programas de dispositivo específico.
televisión para adultos según los límites de -- Los archivos convertidos que no cumplan el
clasificaciones establecidos. Introduzca una estándar de Códec DivX no podrán reproducirse
contraseña para ver un programa bloqueado. o pueden producir sonido anormal.
Las clasificaciones difieren de un país a otro. •• Cancelación del registro Cancela el registro de DivX.
•• Cerrar Seleccione esta opción para cerrar DivX(R) VOD
-- Bloque de entrada Bloquea las fuentes de entrada.
Para actualizar el software
Ajustes de OPCIÓN (Configuración) ➾ OPCIÓN ➙ Información
del sistema.
Para seleccionar el idioma Selecciona Actualizar software por USB o Versión
de FW. El firmware se descargará e instalará. Al
(Configuración) ➾ OPCIÓN ➙ finalizar la actualización, el televisor LG se reiniciará.
Lenguaje(Language)
••Actualizar Software por USB Actualiza el
••Lenguaje Selecciona un idioma deseado. software a través de un dispositivo USB.
-- Idioma del menú Selecciona un idioma para ••Versión de FW Comprueba la versión del
el texto en la pantalla. (Inglés / Español software y la información del producto o servicio.
(predeterminado) / Portugués)
Para especificar la configuración inicial
Para establecer los subtítulos
(Configuración) ➾ OPCIÓN ➙ Configuración
(Configuración) ➾ OPCIÓN ➙ Subtítulo Inicial
Permite ver subtítulos cuando la estación de TV Toda la información almacenada se borra y se
ofrece programación con subtítulos. Los subtítulos restablecen los ajustes del televisor. El televisor
de programas solo funcionan en emisiones se apaga y se enciende nuevamente, y todos los
digitales/analógicas o entrada externa. ajustes se restablecen.
15
-- Cuando la opción Sist. de bloqueo está MULTIMEDIA
activada, aparece una ventana emergente que
solicita una contraseña.
-- No desconecte la alimentación durante la
inicialización. Uso de un dispositivo de almacenamiento
USB - advertencia
Para cambiar la Configuración de modo
••Si el dispositivo de almacenamiento USB tiene
(Configuración) ➾ OPCIÓN ➙ Modo de incorporado un programa de reconocimiento
configuración automático o utiliza su propio controlador, es
Seleccionando el entorno. Escoja modo de config. posible que no funcione.
que desee. ••Algunos dispositivos de almacenamiento
••El modo Demo de Tienda es para exhibición en USB podrían no funcionar o funcionar
la tienda. incorrectamente.
-- Modo Demo No es posible usar el Modo ••Utilice solo un dispositivo de almacenamiento
Demo en el modo Usar en casa. Si selecciona USB que tenga un formato de sistema de archivo
Encendido, la pantalla se restablece FAT16, FAT32 o NTFS.
automáticamente después de 5 minutos en ••Para discos duros externos USB, se recomienda
Modo Demo. utilizar dispositivos con una tensión nominal de
menos de 5 V y una corriente nominal de menos
de 500 mA.
ENTRADAS ••Es recomendable utilizar dispositivos de
memoria USB de 32 GB o menos y discos duros
USB de 2 TB o menos.
Para seleccionar la entrada externa ••Si un disco duro USB con función de ahorro de
energía no funciona correctamente, apague
Selecciona la entrada externa. y encienda el televisor. Para obtener más
Presione el botón (INPUT) o (Configuración) información, consulte el manual de usuario de la
➾ ENTRADA unidad de disco duro USB.
••Los datos guardados en el dispositivo de
almacenamiento USB pueden dañarse, así que
asegúrese de hacer una copia de seguridad de
los archivos importantes en otros dispositivos.
ESPAÑOL
16
Archivos compatibles con Mis medios
••Formatos de imagen compatibles
ESPAÑOL
*.mkv MKV H.264, MPEG1, MPEG2, MPEG4, DivX 3.11, DivX 4.12, DivX 5, DivX 6, XviD,
VC1, WMV3
HE-AAC, AC3, MP3, LPCM
*.mpg PS (Program Stream) MPEG1, MPEG2
*.mpeg AC3, MP3
Otros (*.ts) TS (Transport Stream) MPEG2, H.264,
HE-AAC, AAC, E-AC3, AC3, MP3
••Formatos de subtítulos compatibles
Extensión de archivo Analizador de subtítulos Comentarios
.srt SubRip
.ssa/ .ass SubStation Alpha
.smi SAMI
.sub SubViewr SubViewer 1.0 y 2.0 solamente
MicroDVD
DVDSubtitleSystem
SubIdx (VobSub)
.txt TMPlayer
17
Para ver el manual web Modo HDMI (DTV) admitido
Frecuencia Frecuencia
El manual web le permite acceder fácilmente Resolución
horizontal (kHz) vertical (Hz)
a información detallada del televisor.
31.47 59.94
Visite http://www.lg.com. 640 x 480p
31.50 60.00
15.73 59.94
720 (1440) x 480i
Especificaciones 15.75
31.47
60.00
59.94
720 x 480p
31.50 60.00
Las especificaciones del producto pueden
720 (1440) x 576i 15.63 50.00
modificarse sin previo aviso debido a una
720 x 576p 31.25 50.00
actualización de las funciones del producto.
44.96 59.94
1280 x 720p 45.00 60.00
Sistema de televisión 37.50 50.00
28.13 50.00
NTSC-M, PAL-M/N, ISDB-T 1920 x 1080i 33.72 59.94
33.75 60.00
Cobertura de programa 26.97 23.97
27.00 24.00
VHF 2-13, UHF 14-69, CATV 1-135
33.72 29.97
1920 x 1080p 33.75 30.00
Impedancia de la antena externa 56.25 50.00
75 Ω 67.43 59.94
67.50 60.00
Condiciones ambientales
Información de conexión del puerto
••Temperatura de funcionamiento de componente
0 °C a 40 °C
••Humedad de funcionamiento Puertos de componente en el
Y PB PR
Inferior al 80 % televisor
••Temperatura de almacenamiento
-20 °C a 60 °C
ESPAÑOL
Y PB PR
••Humedad de almacenamiento Puertos de salida de video en el Y B-Y R-Y
Inferior al 85 % reproductor de DVD Y Cb Cr
Y Pb Pr
Modo HDMI (PC) admitido
Modo de componente admitido
Frecuencia Frecuencia
Resolución
horizontal (kHz) vertical (Hz) Frecuencia Frecuencia
Resolución
720 x 400 31.46 70.08 horizontal (kHz) vertical (Hz)
640 x 480 31.46 59.94 15.73 59.94
720 (1440) x 480i
800 x 600 37.87 60.31 15.75 60.00
1024 x 768 48.36 60.00 31.47 59.94
720 x 480p
31.50 60.00
1280 x 720 45.00 60.00
720 (1440) x 576i 15.63 50.00
1360 x 768 47.71 60.01
1 1366 x 768 720 x 576p 31.25 50.00
47.71 59.79
37.50 50.00
2 1280 x 1024 63.98 60.02 1280 x 720p 44.96 59.94
1920 x 1080 67.50 60.00 45.00 60.00
28.13 50.00
1 Solo para 32LH500B 1920 x 1080i 33.72 59.94
2 Solo para 43LH5000 33.75 60.00
56.25 50.00
1920 x 1080p 67.43 59.94
67.50 60.00
18
Solución de problemas Licencias
••No puede controlar el televisor con el control Las licencias compatibles pueden diferir según el
remoto. modelo.
-- Compruebe si se ha puesto algo, como una Para obtener más información sobre las licencias,
cinta, sobre el receptor. visite www.lg.com.
-- Compruebe si hay algún obstáculo entre el
producto y el control remoto.
-- Sustituya las pilas por otras nuevas.
••No se muestra la imagen y no se produce ningún Fabricado bajo licencia de Dolby Laboratories.
sonido. Dolby y el símbolo de la doble D son marcas
-- Verifique si el producto está encendido. comerciales de Dolby Laboratories.
-- Compruebe si el cable de alimentación está
conectado a un tomacorriente de pared.
-- Compruebe si hay un problema en el
tomacorriente de pared conectando otros
productos. Los términos HDMI y HDMI High-Definition
••El televisor se apaga de repente. Multimedia Interface, y el logotipo de HDMI
-- Compruebe la configuración del control de son marcas comerciales o marcas registradas de
encendido. HDMI Licensing LLC en los Estados Unidos y otros
La fuente de alimentación puede ser países.
interrumpida.
-- Compruebe si la función Hora de apagado/
Temporizador está activada en el ajuste HORA.
-- Si no hay señal mientras el televisor
está encendido, el televisor se apagará
automáticamente después de 15 minutos de Este dispositivo DivX Certified ® ha superado
inactividad. pruebas rigurosas para garantizar que reproduce
video DivX®.
ESPAÑOL
Para obtener la información sobre la configuración DivX VOD del menú de configuración del
del dispositivo de control externo, visite www.lg.com. dispositivo.
19
Los números de modelo y de serie del televisor se encuentra en la parte de atrás
y a un lado del televisor. Anótelo a continuación por si alguna vez necesita servicio.
MODELO
NÚMERO DE SERIE