Professional Documents
Culture Documents
Design Specifications
Make up Length (ft): .83
Shank Bore (ins): 2.283
Shank Diam (ins): 6.356
Connection std: Y
Connection Size(ins): 4.500
Connection Type: Api Reg Pin
Make up Torque (ft-lbs): 20000
JSA(in²): 13.02
8 ½" DSF713M-B32 Face Volume:(in³) 61.40
Normalised Face vol: 60.80%
Design Features of this bit
DuraForce™ Cutters - Designed for maximized impact toughness. The cutter incorporates a
new non-planar interface to minimize stresses in the cutter, polycrystalline diamond material Blade Qty: 7
chemistry specifically selected for impact toughness and a deep-leached Thermostable PDC Gauge Length:(ins) 2.500
surface layer for unrivaled abrasion resistance.
Gauge Geometry: Spiral-Trailing
SwitchBlade® Hydraulics - A patented cross-flow design to improve the drilling efficiency of Profile: Short Taper - Medium Cone
PDC drill bits. Conventional PDC bit hydraulics channel all flow from the central region of the bit
outwards. Much of the flow is used inefficiently and contributes little to cleaning and cooling the
PDC cutters or to bottom hole cleaning. By using a new cross-flow approach, the SwitchBlade® Recommended Operating
design makes more efficient use of the total fluid volume. Parameters
DiamondBack™ cutters - Are strategically positioned in the critical wear areas of the bit to Max Operating WOB (klbs): 38
provide a second row of cutters to some or all blades. This gives up to twice the PDC cutter TFA Range (ins2): 0.527 - 1.116
density, enhancing the durability of the bit or tool, giving more footage and a higher average Max Flow (gpm): 500
ROP (since the bit stays sharper for longer). Additionally, lateral stability is improved since the
effective number of blades is dramatically increased. Available as an option in Hybrid PDC bits Pressure Drop(psi): 700-1500
and tools, DiamondBack cutters replace the diamond impregnated studs in critical areas of the HSI: 2-7
bit or tool. In some applications this bit is run successfully beyond these
parameters. Contact your NOV Downhole Representative for
recommended operating parameters in your application. NOV
Downhole reserves the right to revise these specifications, based on
advances and improvements in technology.
This report is valid for 30 days from 19-Nov-2012
Cutting Structure Nozzles & Ports
Type Qty Location Diameter Shape Qty Type Size
Primary 44 FACE 13 mm CYLINDER 4 AAK VARIABLE
Primary 7 GAGE 13 mm PREFLATTED 3 THREADED PORT 12 FIXED
Secondary 24 FACE 13 mm CYLINDER
Upream 7 BACK-ANGLE 13 mm CYLINDER