Professional Documents
Culture Documents
1 |
7 | PERFECT ERGONOMIC DESIGN AND 8| HIGHLY PRECISE STEERING AND DRIVE SYSTEMS
HANDLING Intelligent steering and control systems for exceedingly quiet operation
Relaxed working is ensured by the ergonomically even in narrow bends guarantee precision in concrete paving.
designed workplace offering a user-friendly operating
concept and perfect visibility.
Highlights in modular design
7 |
10 |
5 |
6 |
12 |
3 |
9 |
2 |
4 |
8 |
Concrete spreading
Engine
Cooling water
Number of cylinders 6
Tank capacities
Driving properties
Crawler units
Number 4
Type B0: dimensions (L x W x H) 61” x 12” x 23” (1,490 x 300 x 570 mm)
Height adjustment
Central crown
Variable adjustment range for paving widths of 6‘ 6” – 20’ (2,00 – 6,00 m): max. 3 % *2
Transport dimensions (L x W x H)
Machine weights
Operating weight CE (including slab paving mold type 1300 wi), 12’ 42,000 lbs (19,000 kg) *3
*1 = Please consult factory for special paving widths, layer thicknesses and optional equipment features
*2 = Values within standard transport height; please consult factory for special dimensions
*3 = Weights depend on the machine’s range of equipment and paving width
Dimensions
06
07
Paving situation: slipform paver SP 64 i equipped with spreading auger or spreading plough,
slab paving mold type 1300 wi and super smoother
(1,000)
39”
Working direction
(1,000)
39”
34’ 5” (10,500) *2
Working direction
Electrical system 24 V
Hydraulic system with an adequately sized hydraulic oil tank and a pump splitter gearbox with 2 output shafts and the
pumps required for the basic equipment of the machine.
With a large number of fixation points, the chassis is prepared for modular supplementing with various machine functions
Robust steel frame, telescoping in stages by total 3 ft 9 in on both sides to the front and to the rear;
can be optionally extended by fixed extension pieces
Chassis components for step-by-step mechanical telescoping for working widths up to 13’ 1” (4.00 m)
Travelling speed: crawler unit type B0: 0 to 69 fpm; type B1: 0 to 77 fpm
Paving speed: crawler unit type B0: 0 to 20 fpm, type B1: 0 to 23 fpm
Version with four crawler units type B0 with 39” (1,000 mm) height adjustment, 12” (300 mm) wide
Version with two manually slewing crawler unit connections each at front and rear
WI-CONTROL - the high-quality control for optimum interaction between all machine functions
The existing CAN bus system can be expanded for the specific customer
Eco mode: Engine management optimised acc. to demand for reduced diesel consumption and low noise emissions
Proportional electrohydraulic levelling and steering by PLC system including 4 levelling sensors and 2 steering sensors
Automated recognition of the particular machine configuration enables simple orientation for the operator
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Vibration
Paving mould series 1300 wi, without crown profile - basic width 12 ft
Flat inserts for the corner areas of the paving mould series 1300 wi
Operator´s stand
Control panel 2 with multi-function control display, providing a menu for the operator giving all necessary machine
parameters and allowing settings to be made. This can be adapted to all travel directions and paving configurations.
One of the control panels can be stored in the engine station. The second control panel be protected against vandalism
and weather using lockable covers.
Others
Machine preparation for installing the control unit for WITOS FleetView. "WIRTGEN Road Technologies Telematics and
on-site Solutions" (WITOS) is the intelligent telematics system of the WIRTGEN Road Technologies for efficient fleet and
service management worldwide.
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
10
11
Main frame and height adjustment
Chassis components for continuous hydraulic telescoping for working widths up to 20’ (6.00 m)
Version with four crawler unit tracks type B0 with polyurethane track pads
Version with four crawler units type B0 with 39” (1,000 mm) height adjustment, 12” (300 mm) wide
Version with four crawler unit tracks type B0 with polyurethane track pads
Version with two hydraulically slewing crawler unit connections each at front and rear
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Concrete spreading for road surface paving
Vibration
Metering gate for paving mould without crown profile - basic width 12 ft
Split metering gate for paving mould with / without crown profile - basic width 12 ft
Paving mould series 1300 wi, with crown profile - basic width 12 ft
Split sideplates for start of shift with mould boards series 1300 wi
ESC "Edge Slump Control" inserts for the corner areas of the paving mould series 1300 wi
Automatic dowel-bar inserter (DBI) for use without crown profile - basic width 12 ft - mechanically telescoping
Automatic dowel-bar inserter (DBI) for use without crown profile - basic width 12 ft - hydraulically telescoping
Automatic dowel-bar inserter (DBI) for use with crown profile - basic width 14 ft - mechanically telescoping
Automatic dowel-bar inserter (DBI) for use with crown profile - basic width 14 ft - hydraulically telescoping
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
12
13
1 side tie-bar inserter for straight tie-bars, max. ø 3/4", length 2.5 ft
2 side tie-bar inserters for straight tie-bars, max. ø 3/4", length 2.5 ft
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Concrete equipment for carriageway paving
Load blocks as conversion aid for altering the width of the dowel-bar inserter (DBI)
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
14
15
Concrete spreading for offset paving
Belt conveyor 19‘ 4” x 24” (5.90 m x 0.60 m) with reversible hydraulic drive, hydraulically adjustable
Belt conveyor 19‘ 8” x 24” (6.00 m x 0.60 m), folding, with reversible hydraulic drive, hydraulically adjustable
Auger conveyor 15‘ 1” x 16” (4.60 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
Auger conveyor 18‘ 8” x 16“ (5.70 m x 0.40 m) with reversible hydraulic drive
Steel chute
Steel / rubber chute
1 set of hydraulic components for adjusting the sideplate of EV offset mould boards
Height adapter rigid for split offset paving mould 35” (0.90 m) tall
Offset paving mould up to 24” (0.60 m) wide (max. 16” (0.40 m) tall) (note form TEI#2170960)
Offset paving mould from 24” to 48” (0.60 m to 1.20 m) wide (max. 16” (0.40 m) tall) (note form TEI#2170960)
Offset paving mould from 47” to 5’ 11” (1.20 m to 1.80 m) wide (max. 16” (0.40 m) tall) (note form TEI#2170960)
Offset mould board up to 0.90 m tall (max. 24” (0.60 m) base width), incl. hopper (note form TEI#2170960)
Offset mould board up to 47” (1.20 m) tall (max. 24” (0.60 m) base width), incl. hopper (note form TEI#2170960)
Split offset paving mould up to 24” (0.60 m) wide (max. 16” (0.40 m) tall) (note form TEI#2170960)
Split offset paving mould from 24” to 47” (0.60 m to 1.20 m) wide (max. 16” (0.40 m) tall) (note form TEI#2170960)
Lower part for offset paving mould of a split moulds up to 24” (0.60 m) wide (max. 16” (0.40 m) tall)
Lower part for offset paving mould of a split moulds from 24” to 47” (0.60 m to 1.20 m) wide (max. 16” (0.40 m) tall)
Operator´s stand
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Others
Paint in maximum two special colours with substructure in special colour (RAL)
Second tensioning winch for levelling the machine using two wire ropes
Radius kit, fibreglass rod as guide wire replacement on corners with different radii
Export packing
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
WIRTGEN GmbH
Reinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392
Internet: www.wirtgen.com · E-Mail: info@wirtgen.com
Illustrations and texts are non-binding and may include customized fittings. Subject to technical changes.
Performance data depend on operational conditions. No. 2525049 US-03/16 © by WIRTGEN GmbH 2016. Printed in Germany