Professional Documents
Culture Documents
www.axcentmedical.com
For Out-Patient Department, Spot-check, Transport,
Ward and other Basic Monitoring.
Configuration Optional
Technical Specifications
Display RESP
8” color TFT LCD Screen, resolution: 800 x 600 Measurement method: Thoracic electrical
bioimpedance
ECG Measuring lead: Lead I, II
Lead type Wave gain: ×0.25, ×0.5, ×1, ×2
3-lead: I, II, III Respiratory impedance range: 0.5-5 Ω
5-lead: I, II, III, aVR, aVL, aVF, V Baseline impedance: 500-4000 Ω
Display sensitivity: Gain: 10 grades
2.5 mm/mV (×0.25), 5 mm/mV (×0.5), Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s
PAVO Vital Sign Monitor 10 mm/mV (×1.0), 20 mm/mV (×2.0)
Wave sweep speed: 6.25 mm/s, 12.5 mm/s, TEMP
25 mm/s, 50 mm/s Measurement method: Thermistor
Features Bandwidth Measuring range: 5~50 °C (41~122 °F)
• 8” color TFT LCD Screen (touch screen optional) Diagnostic mode: 0.05Hz~100Hz Resolution: 0.1 °C
• Portable, lightweight and sturdy design Monitor mode: 0.5Hz~40Hz Measurement accuracy: ±0.1 °C
• Flexible parameters configuration for different clinical environments Surgery mode: 1Hz~20Hz
Strong filter mode: 5Hz~20Hz CMRR Recorder (optional)
• Rechargeable Li-ion Battery (up to 12 hours uninterruptable work)
>100dB Built-in, Thermal dot array
• Big font and font color display setting
Notch: 50/60 Hz notch filter can be set to Horizontal resolution: 16 dots/mm (25 mm/s
• Spot-check and continuous monitoring mode paper speed)
on or off
• Selectable for Adult, Pediatric and Neonatal patients Differential input impedance >5 MΩ Vertical resolution: 8 dots/mm
• Wired/Wireless CMS, support HL7 protocol to HIS Electrode polarization voltage range: ±400 mV Paper speed: 25 mm/s, 50 mm/s
• Barcode scanner support Baseline recovery time <3 s after defibrillation Number of waveform channels: 3
• Thermal recorder support (in monitor and surgery mode)
• Graphical & tabular trend review Calibration signal: 1 mV (peak - peak),
• 48 hours holographic wave review for each patient (stored in SD card) accuracy ±3%
www.axcentmedical.com
PAVO Vital Sign Monitor
Technical Specifications
Operation Environment
Power: AC 100-250 V, 50/60 Hz
Temperature: 0-40 °C
Humidity: 15-85%
Patient Range: Adult, Pediatric, Neonate
www.axcentmedical.com
12.1”color TFT LCD screen, wide and flat screen design,ecnomic and reliable
Technical Specifications
Display RESP
12.1” TFT (touch screen optional) Measurement method: Thoracic electrical
Resolution: 800 x 600 bioimpedance
Number of traces: 8 waveforms Measuring lead: Lead I, II
Wave gain: ×0.25, ×0.5, ×1, ×2
ECG Respiratory impedance range: 0.5-5Ω
Lead type: 3-lead, 5-lead, 12-lead Baseline impedance: 500-4000Ω
ECG waveform: 2 channels, 7 channels, Gain: 10 grades
12 channels Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s
Display sensitivity: 2.5 mm/mV (×0.25),
5 mm/mV (×0.5), 10 mm/mV (×1.0), Pulse Rate
20 mm/mV (×2.0) Range: 30~254 bpm
Wave sweep speed: 6.25 mm/s, 12.5 mm/s, Resolution: 1bpm
25 mm/s, 50 mm/s Accuracy: ±2bpm (non-motion)
Bandwidth ±5bpm (motion)
CETUS x12 Patient Monitor Diagnostic mode: 0.05 Hz~100 Hz Refreshing rate: 1s
Monitor mode: 0.5 Hz~40 Hz
Surgery mode: 1Hz~20Hz TEMP
Features Strong filter mode: 5 Hz~20 Hz Accuracy: ±0.1 °C or ±0.2 °C °F (without probe)
CMRR >100 dB Measurement range: 5~50 °C (41~122 °F)
• 12.1” color TFT LCD screen
Notch: 50/60 Hz notch filter can be set to Channel: Two channels
• 8 waveform display, up to 12-lead ECG analysis
on or off Resolution: 0.1 °C
• Powerful calculation
Differential input impedance >5MΩ Parameters: T1,T2 and TD
(Hemodynamic, Drug Dose, Oxygenation, Ventilation)
Electrode polarization voltage range: ±400 mV
• Pacemaker detection Baseline recovery time <3s after defibrillation
• ST & arrhythmia analysis (in monitor and surgery mode)
• OxyCRGs screen Calibration signal: 1mV (peak - peak),
• Wired/Wireless CMS, support HL7 protocol to HIS accuracy ±3%
• SpO2 pulse-tone modulation (Pitch Tone)
• MEWS (Modified Early Warning Score)
• Graphical & tabular trend review (120 hours)
• Rechargeable Lithium-Ion Battery (2600 mAh)
www.axcentmedical.com
7-lead ECG
CETUS x12 Patient Monitor
Technical Specifications
Configuration: 5-lead ECG, SpO2, NIBP, TEMP, Resp, PR; Li-ion battery Notch: 50/60 Hz notch filter can be set Masimo SET® SpO2(Optional)
Optional: Touch-Screen, 12-lead ECG, Masimo/Nellcor SpO2, IBP, C.O., EtCO2, Multi-Gas, BIS, NMT, to on or off Measurement range: 0-100%
VGA, Thermal Recorder, Wired/Wireless CMS Differential input impedance >5MΩ Resolution: 1%
Electrode polarization voltage range: ±400mV Accuracy: ±2% (70-100%, Adult/Pediatric,
Baseline recovery time <3s after defibrillation non-motion, low prefusion);
Masimo SET® SpO2 Bispectrial Index™ by Aspect
Provides anti-motion and anti-low Monitor the level of consciousness (in monitor and surgery mode) ±3% (70-100%, Neonate,
perfusion SpO2 measurement. of the patient under general anesthesia
or sedation. provides BIS, SQI, EMG, SR, Calibration signal: 1 mV (peak - peak), non-motion);
SEF, TP, PC value and EEG wave. accuracy ±3% ±3% (70-100%, motion); 0-69%,
unspecified
Masimo Phasein IRMATM/ISA NMT RESP Refreshing Rate: 1s
Sidestream/Mainstream EtCO2 Intergrade Organon TOF-Watch® SX
Allows selection of the modality best Measurement method: Thoracic electrical
suited to the application, monitoring bioimpedance Pulse Rate
with infrared absorption technique.
Measuring lead: Lead I, II Range: 30~300 bpm
Wave gain: ×0.25, ×0.5, ×1, ×2 Resolution: 1 bpm
IBP C.O.
2-4 Channel, support IBP waveform Cardiac Output Respiratory impedance range: 0.5-5 Ω Accuracy: ±2bpm (non-motion)
overlapping display
Baseline impedance: 500-4000 Ω ±5bpm (motion)
Gain: 10 grades Refreshing rate: 1s
Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s
NIBP
Technical Specifications TEMP Measurement method: Automatic
Accuracy: ±0.1 or ±0.2 °F (without probe) oscillometric method
Display ECG Measurement range: 5~50℃ (41~122 °F) Operating mode: Manual, automatic,
15.6” TFT (touch screen optional) Lead type: 3-lead, 5-lead,12-lead Channel: Two channels continuous
Resolution: 1366 x 768 ECG waveform: 2 channels, 7 channels, Resolution: 0.1℃ Measurement unit: mmHg/kPa selectable
Number of traces: 12 waveforms 12 channels Parameters::T1, T2 and TD Typical measurement time: 20~40 s
Display sensitivity: 2.5 mm/mV (×0.25), Measurement type: Systolic, Diastolic,
I/O 5 mm/mV (×0.5), 10 mm/mV (×1.0), SpO2 Mean Measurement range (mmHg)
LAN: 1 standard RJ45 port 20 mm/mV (×2.0) Measurement range: 0-100% Range of Systolic pressure: Adult 40-270
WLAN: IEEE 802.11b/g/n Wave sweep speed: 6.25 mm/s, 12.5 mm/s, Resolution: 1% Pediatric 40-200
USB: 2 USB connectors 25 mm/s, 50 mm/s Accuracy: ±2% (70-100%, Adult/Pediatric); Neonatal 40-135
SD: 1 SD card socket Bandwidth ±3% (70-100%, Neonate); Range of Diastolic pressure: Adult 10-210
VGA: 1 VGA monitor connector Diagnostic mode: 0.05 Hz~100 Hz 0-69%, unspecified Pediatric 10-150
Output: 1 connector for Nurse call, Monitor mode: 0.5 Hz~40 Hz Refreshing Rate: 1s Neonatal 10-95
Defib Sync Analog Output Surgery mode: 1 Hz~20 Hz
Strong filter mode: 5Hz~20 Hz
CMRR>100 dB
www.axcentmedical.com
CETUS x15 Critical Care Patient Monitor
Technical Specifications
www.axcentmedical.com
CETUS x15 Critical Care Patient Monitor
Technical Specifications
www.axcentmedical.com
CETUS xl Advanced Patient Monitor
Multiple parameter options satisfy the needs of ICU, CCU, NICU
IBP C.O.
2-4 Channel, support IBP waveform Cardiac Output
overlapping display
Display ECG
Features 15.6” TFT Touch screen Lead type: 3-lead, 5-lead,12-lead
• 15.6”/17/19” switchable TFT LCD Touch Screen Resolution: 1366 x 768 ECG waveform: 2 channels, 7 channels,
• Aluminium material shell Number of traces: 12 waveforms 12 channels
Display sensitivity: 2.5 mm/mV (×0.25),
• Fanless design suitable for quite care environment
I/O 5 mm/mV (×0.5), 10 mm/mV (×1.0),
• 10 waveform display, up to 12-lead ECG analysis LAN: 1 standard RJ45 port 20 mm/mV (×2.0)
• Powerful calculation (Hemodynamic, Drug Dose, Oxygenation, Ventilation) WLAN: IEEE 802.11b/g/n Wave sweep speed: 6.25mm/s, 12.5 mm/s,
• SpO2 support PVI and PI, low perfusion 0.2% USB: 2 USB connectors 25 mm/s, 50 mm/s
• Aspect module, NMT (Organon TOF-Watch®) module optional SD: 1 SD card socket Bandwidth
• Wired/Wireless CMS, support HL7 protocol to HIS VGA: 1 VGA monitor connector Diagnostic mode: 0.05 Hz~100 Hz
• SpO2 pulse-tone modulation (Pitch Tone) Output: 1 connector for Nurse call, Monitor mode: 0.5 Hz~40 Hz
Defib Sync Analog Output Surgery mode: 1 Hz~20 Hz
• VGA support external display
• Graphical & tabular trend review (120 hours) Strong filter mode: 5Hz~20 Hz
•4
8 h full disclosure wave review for each patient (stored in SD card)
www.axcentmedical.com
12-lead ECG OxyCRG screen
CMRR>100dB SpO2
Notch: 50/60Hz notch filter can be set to Measurement range: 0-100%
on or off Resolution: 1%
Differential input impedance >5 MΩ Accuracy: ±2% (70-100%, Adult/Pediatric);
4 channel IBP Dynamic trends
Electrode polarization voltage range: ±400 mV ±3% (70-100%, Neonate);
Baseline recovery time <3s after defibrillation 0-69%, unspecified
(in monitor and surgery mode) Refreshing Rate: 1s NIBP IBP (Optional)
Calibration signal: 1 mV (peak - peak), Measurement method: Automatic Channel: 2-channel or 4-channel
accuracy ±3% Masimo SET® SpO2(Optional) oscillometric method ART: 0 to 300 mmHg
Measurement range: 0-100% Operating mode: Manual, automatic, PA: -6 to 120 mmHg
RESP Resolution: 1% continuous CVP/RAP/LAP/ICP: -10 to 40 mmHg
Measurement method: Thoracic electrical Accuracy: ±2% (70-100%, Adult/Pediatric, Measurement unit: mmHg/kPa selectable Measurement range: P1/P2 -50 to 300 mmHg
bioimpedance non-motion, low prefusion); Typical measurement time: 20~40s Resolution: 1 mmHg
Measuring lead: Lead I, II ±3% (70-100%, Neonate, Measurement type: Systolic, Diastolic, Mean Accuracy: ±2% or ±1 mmHg,
Wave gain: ×0.25, ×0.5, ×1, ×2 non-motion); Measurement range (mmHg) whichever is greater (without sensor)
Respiratory impedance range: 0.5-5 Ω ±3% (70-100%, motion); Range of Systolic pressure: Adult 40-270 Sensitivity: 5uV/mmHg/V
Baseline impedance: 500-4000 Ω 0-69%, unspecified Pediatric 40-200 Impedance range: 300 to 3000 Ω
Gain: 10 grades Refreshing Rate: 1s Neonatal 40-135
Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s Range of Diastolic pressure: Adult 10-210 C.O. (Optional)
Pulse Rate Method: Thermodilution
Pediatric 10-150
TEMP Range: 30~300 bpm Range: C.O.: 0.2 to 20 L/min
Neonatal 10-95
Accuracy: ±0.1 °C or ±0.2 °F (without probe) Resolution: 1bpm TB: 23 to 45 °C
Range of Mean pressure: Adult 20-230
Measurement range: 5~50 °C (41~122 °F) Accuracy: ±2bpm (non-motion) T1: -1 to 27 °C
Pediatric 20-165
Channel: Two channels ±5bpm (motion) Accuracy: C.O.: ±5% or ±0.1L/min,
Neonatal 20-105
Resolution: 0.1 °C Refreshing rate: 1s whichever is greater TB, T1: ±0.5°C
Measurement accuracy
Parameters: T1, T2 and TD (without sensor)
Maximum average error: ±5 mmHg
Maximum standard deviation: 8 mmHg
Resolution: 1 mmHg
Interval: 1, 2, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180,
240, 480 minutes
Overpressure protection: Software and
hardware, double safety protection
Cuff pressure range: 0-280mmHg
www.axcentmedical.com
CETUS xl Advanced Patient Monitor
Technical Specifications
www.axcentmedical.com
Patient Monitoring Solutions
For more information, please contact us.
www.axcentmedical.com