Professional Documents
Culture Documents
Oracle Receivables
Import Transactions:
AutoInvoice reduces cycle time by automating the transaction creation process. Using the
AutoInvoice program, Oracle Receivables lets you import and validate transaction data from
other financial systems from which you can create invoices, debit memos, credit memos, and
on-account credits. It allows you to define how you want to group imported transactions into
invoices and how to order the invoice lines.
Create transactions:
Use the Transaction window to enter your invoices, debit memos, credit memos, and
commitments. You can also query and update your transactions in this window and review
your transactions and chargebacks in the Transactions Summary window.
Click on Distributions button if you want to set different account other than the receivable
and revenue accounts set for the Transaction Source, GSACGOINV, i.e. the source of this
invoice displayed on the invoice.
You can see that the Revenue account is taken from the setup by default. You can change this
if you want. Close this window to go back to the Invoice Lines form.
Note:
The Revenue and Receivables accounts are set on the Invoice transaction type. The invoice
transaction type for this invoice is GSACGOINV.
Credit Transactions:
Use the Credit Transactions window to enter, update, and review credit memos against
specific invoices, debit memos, or commitments. You create credit memos to reduce the
balance due for a transaction. When you credit a transaction, Receivables creates the
appropriate accounting entries and reverses any sales credit assigned to your salespeople.
Receivables lets you credit an entire invoice or specific invoice lines. You can also credit
freight for an entire invoice or only for specific invoice lines.
To simplify the AutoInvoice process, Oracle Receivables provides two windows you can use
to view and update records in the AutoInvoice interface tables. The Interface Lines window
displays all records in the interface tables that failed validation after AutoInvoice submission.
The AutoInvoice Errors window displays any errors associated with each record. These
windows help you to quickly review and correct invalid records in the interface tables,
without programming.
You can find the receipt no# navigate to “Transactions summary” and query your invoice.
Just click on “Installment” from this window go to “Activities” now Receipt will be open for
you.
Druk op termijnen
Dan op Activiteiten
Step 3: Print Transaction OR Create/Print Consolidated Bill
Print Transaction
Use the Print Invoices window to submit your invoices, debit memos, chargebacks, deposits,
guarantees, invoices against deposits, invoices against guarantees, credit memos, on-account
credits, and adjustments for printing. You can print a batch of invoices, new invoices, selected
invoices, and adjustments.
You also have the option of previewing your transactions prior to printing with the Invoice
Print Preview Report.
Now we shall print the invoice to send the document to the customer.
Click OK
Check the list of values for Request Name field
Out of all the invoice reports we shall select Invoice Print Preview Report report. This
report will show us the output so that we can review the invoices before we send the actual
invoice to the customer.
Press OK
After previewing the invoice you can run the actual invoice report to send to the customer.
As we had executed the Preview report before we shall execute the report, Invoice Print New
Invoices.
Press OK and submit the request. This request also executes 2 concurrent programs,
Once both the requests complete, check the output of the 2nd request, i.e. Invoice Print New
Invoices.
Now the invoice has been printed in Oracle. Here we have used the standard Oracle report for
printing the invoice. Normally each organization has its own invoice format and hence almost
all organizations have their own custom invoice report. Instead of executing the standard
report the organizations execute their own custom invoice report.
For customers that prefer a monthly billing, Oracle Receivables enables you to issue
Consolidated Bills rather than individual invoices for each transaction. When printing
consolidated bills, Oracle Receivables gives you the option of printing new (final)
consolidated bills, printing drafts which can be accepted or rejected, or reprinting draft or
final consolidated bills.
Click OK
Check the available reports in the Name field.
The customer for which we have created the invoice does not ask for Consolidated Billing and
hence this report will not be executed.
Enter the customer name for whom we have raised the invoice. The customer name is Abu
Dhabi Cargo Company.
This form displays information on when the customer was called, the customer response
(shown above), details of Statements as shown below.
Dunning Letter details
From this form Actions to be taken are recorded. Click on Actions button.
Close this window and click on Topics button.
The call topics are displayed. All details about the customer and transactions, disputes, actions
can be viewed from this form.
1. Click on Aging button to view the invoice aging for this customer
Click on Account details button will bring up the invoices for each aging bucket.
1. Click on Credit Hold button to put a hold on this customer
You can also release hold on this customer by pressing the button once again
1. Click on Account Overview button gives the overview of the customer transactions
over all the periods
1. Click on Account Details button gives us the details of all the outstanding
transactions for this customer.
Once you are done with researching on the customer account you can save and close the
Customer Accounts form.
When a customer’s account or payment for a specific transaction is past due, you can contact
the customer by phone and use the Customer Calls window to record the results of your
conversation. By speaking with a customer you may learn that they were incorrectly billed,
never received the goods or services that were ordered, or have already sent payment for the
invoice in question. By entering details about your conversation, you create a record of the
contact and can recommend any further collection action.
If the organization thinks that this customer has to be contact for making the payment then the
customer is contacted and all details of this communication is recorded on this form.
You can use these buttons to review the customer and transaction details as you have seen in
the previous step.
Use the Receipts window to enter new or query existing receipts. For each receipt, you can
see whether the receipt is identified and what portion of the receipt has been applied, placed
on-account, and left unapplied. You can enter Cash receipts that you receive from your
customers for goods or services, and Miscellaneous transactions involving revenue earned
from investments, interest, refunds, and stock sales.
With Cross Currency Receipts, you can apply cash in one currency against invoices in a
different currency. The foreign exchange gain or loss is calculated for you automatically.
You can apply receipts to invoices, debit memos, deposits, guarantees, on-account credits, and
chargebacks. You can partially or fully apply a receipt to a single debit item or to several
debit items. You can enter receipts and apply them to transactions in either Open or Future
accounting periods. You can also create chargebacks or adjustments against these
transactions.
When the customer makes a payment a receipt is created. Navigation: Receipts > Receipts
Enter the receipt details.
In the previous step, the caller had noted in the Response section that the customer had
agreed to pay AED 5000 on 02-Oct-2012. We shall enter the receipt with these details as the
customer has made the payment.
Save the form. On saving the Reverse button gets enabled. This button will be used for
reversing the receipt if the receipt had been created by mistake.
Now the receipt has been created for the customer we need to apply this receipt on the
invoices and debit memos for this customer.
The receipt has been created but not applied and therefore the unapplied amount for this
receipt is 5000.
The Applications form opens. Click on Apply To field and check the list of open invoices
and debit memos.
We can select any invoice in this list to apply this receipt amount.
Save the form and close this window. Note the Balances section on the Receipts form.
Now the entire receipt amount has been applied on the invoices. Click on Receipt History
button.
The receipt history details are displayed.
At the end of a period the organization normally transfers the subledger transaction details to
General Ledger.
Submit a new request. Execute the General Ledger Transfer Program as shown below.
Submit this request. The following programs are executed,
We shall now check the journal that has been created for the receivables transactions. Check
the output of the Journal Import program.
The Journal batch created is, AR 1021642 Receivables 19004736: A 1021642.
We see that 3 journals have been created in this journal batch. We can review the journals.