Professional Documents
Culture Documents
Experience In Motion
Pump Supplier to the World
Flowserve is the driving force in the global Product Brands of Distinction
industrial pump marketplace. No other pump
ACEC™ Centrifugal Pumps
company in the world has the depth or breadth
of expertise in the successful application of Aldrich ® Pumps
pre-engineered, engineered and special purpose
Byron Jackson ® Pumps
pumps and systems.
Calder™ Energy Recovery Devices
Cameron ® Pumps
Durco ® Pumps
Flowserve ® Pumps
IDP ® Pumps
Jeumont-Schneider™ Pumps
Pacific ® Pumps
Pleuger ® Pumps
Scienco ® Pumps
TKL™ Pumps
Wilson-Snyder ® Pumps
Worthington ® Pumps
2
flowserve.com
Pump Designs
Flowserve offers a wide range of complementary
pump types, built to recognized global standards Committed to the Complete Pump
and customer specification. These include: System Life Cycle
• Single stage process
• Between bearings single stage For more than two centuries, Flowserve has
• Between bearings multistage served industries requiring solutions that add
value and reduce costs throughout the life
• Vertical
cycle of a pumping system.
• Submersible motor
• Oil and gas
• Positive displacement
• Chemical
• Nuclear
• Power generation
• Specialty
• Water
• General industry
Available Configurations
Flowserve partners
• Sealed and sealless
with customers to
• Axially and radially split respond to the
• Volute and diffuser dynamic business
• Close coupled and spacer coupled conditions that
• Single and double case affect them and to
improve efficiency, maximize throughput and
control process quality. Whether customer needs
involve on-site technical assistance, equipment
upgrades or broader project planning with full
turnkey responsibility, Flowserve delivers
professional, reliable results.
3
A Guide to Flowserve Pumps
The purpose of this publication is to provide a
brief summary of the hundreds of pumps which Oil and Gas
comprise the Flowserve product line. Pump
models are divided into five sections, beginning
with overhung pumps and continuing through Chemical
specialty designs. Each pump is identified by its
formal designation and accompanied by a full-
color cutaway illustration. Applicable engineering Power
standards are listed along with performance
characteristics and key features. The symbols
shown at right are used to identify each pump’s Water Resources
primary market applications.
Primary Metals
General Industry
4
flowserve.com
Table of Contents
Pump Selection Guide............................................6-7 Positive Displacement
Product List.............................................................51
Overhung Pumps Gear.........................................................................52
Product List............................................................9 Screw.......................................................................53
Chemical Process........................................... 10-15 Reciprocating...........................................................54
API Process.................................................... 16-18
Slurry and Solids Handling............................. 19-22 Specialty Products
Industrial Process........................................... 23-25 Product List.............................................................57
Nuclear Pumps and Seals...................................58-61
Between Bearings Pumps Extreme Temperature Pumps...................................62
Product List..........................................................27 Others.................................................................63-65
Single Case - Axially Split - Single Stage........ 28-29
Single Case - Axially Split - Multistage.................30 Additional Information
Single Case - Radially Split - Single Stage............31 Introduction.............................................................67
Single Case - Radially Split - Multistage......... 32-34 Integrated Solutions Group.................................68-69
Double Case.................................................... 35-37 Other Flowserve Products........................................70
Reference Sources...................................................71
Vertical Pumps
Product List.............................................................39 Index
Wet Pit................................................................40-41 Product List........................................................72-73
Double Case........................................................42-43
Submersible.............................................................44
Slurry and Solids Handling.................................45-47
Sump..................................................................48-49 5
Pump Selection Oil and Gas Power Generation
Chemical Processing (Fossil, Renewables,
Guide Downstream Upstream & Pipeline Nuclear)
Condensate Extraction
Boiler Feed Booster
Waste Processing
Slurry Processing
Catalytic Cracking
Pharmaceuticals
Hydrocracking
Gas to Liquids
Cooling Water
Hydrotreating
Acid Transfer
Boiler Feed
Distillation
Polymers
Auxiliary
Solvents
FPSO
Pump
LNG
Category Sub-Category
Overhung Chemical Process - X X X X X X X X X X X X X X X X X X
ANSI, ISO
API Process X X X X X X X X X X X X X X X X X X X X X X X X
Industrial Process X X X X X X X X X X X X
Slurry and Solids X X X X X X X X X X X X
Handling
Between Single Case - X X X X X X X X X X X X X X X X X X X X
Bearings Axially Split
Single Case - X X X X X X X X X X X X X X X X X X
Radially Split
Double Case X X X X X X X X X X X X
Vertical Wet Pit X X X X X X X X X
Double Case X X X X X X X X X X
Deep Well
X X X X X X
Submersible Motor
Slurry and X X X X X X X X X
Solids Handling
Sump X X X X X X X X X
Positive Gear X X X X X X X X
Displace-
ment Screw X X X X X X X X X X X X X
Multiphase X X
Reciprocating X X X X X X
Specialty Nuclear Pumps
Products
Nuclear Seals
Cryogenic Pumps X X
Cryogenic Liquid X
Expander
Geothermal
Deepwell
Submersible Pump
Hydraulic Decoking X
Systems
Power Recovery - X X X
Hydroturbine
Power Recovery -
DWEER
Thruster X X
CVP Concrete X
Volute Pumps
Barge Pump
Molten Salt
VTP Pump
X
X
X
Geothermal Well Services
X
X
Heat Transfer Fluids
X
X
X
Molten Salt Transfer
X
Transformer Cooling
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Auxiliary Services
X
X
X
X
X
X
X
X
X
X
X
X
X
Nuclear)
(Fossil, Renewables,
Power Generation
Nuclear Service
X
X
X
X
X
X
X
X
X
X
X
X
Desalination
X
X
X
X
X
X
Flood Control
X
X
X
X
X
X
X
X
Ground Water Development and Irrigation
X
X
X
Sewage Collection and Treatment
X
X
X
X
X
X
X
X
Water Supply and Distribution
Water Resources
X
X
X
X
X
X
X
X
X
Water Treatment
X
X
X
X
X
Cooling Water
X
X
X
X
X
Descaling
X
X
X
X
X
Hydraulic Press
X
X
X
X
X
X
X
X
X
X
Scale Recycle
X
X
X
X
X
X
X
X
X
Dewatering and Water Supply
X
X
X
X
X
X
Leaching Acid
X
X
X
X
X
Mining
Primary Processing
X
X
X
X
Slurry Transfer
X
X
X
X
X Bleach Chemical
X
X
X
X
X
X
X
Boiler Feed
X
X
X
X
X
X
X
X
X
X
Coatings
X
X
X
Digester
Pulp and Paper
X
X
X
Paper Stock
X
X
Shower Pumps
X
X
X
X
X
X
X
X
X
X
X
X
X
Automotive
X
X
X
X
X
X
X
X
X
X
X
X
Agriculture
X
X
X
X
X
X
X
X
X
X
X
X
Construction
X
X
Industrial Gases
X
X
X
X
X
X
X
X
X
X
X
X
X
Electronics
X
X
X
X
X
X
Fire Protection
X
X
X
X
X
X
X
X
X
X
X
X
Food Processing
General Industry
X
X
X
X
X
X
HVAC
X
X
X
X
X
X
X
X
X
X
OEM
X
X
X
Shipping
flowserve.com
X
X
X
X
X
X
X
Snowmaking
Overhung Pumps flowserve.com
Chemical Process
Mark 3 ASME Standard 10
Mark 3 Lo-Flo 10
Mark 3 Unitized Self-Primer 10
Mark 3 Recessed Impeller 11
Overhung Pumps
Mark 3 In-Line 11
Guardian Magnetic Drive 11
CPX3 ISO Standard 12
CPX3 Self-Priming 12
CPX3 Recessed Impeller 12
CPX3 Close Coupled 13
CPXV Chemical Sump 13
CPXS Magnetic Drive 13
PolyChem GRP 14
PolyChem VGRP 14
PolyChem S-Series 14
PolyChem M-Series 15
Polyshield 15
Polybase 15
API Process
HPX 16
HPXM 16
PHL 16
ERPN 17
PVXM 17
HWMA 17
PVML 18
MSP 18
DSVP 18
Slurry and Solids Handling
M 19
R 19
Titan Slurry 19
LC 20
MND 20
MNR 20
FRBH 21
FRBHJC 21
MPT 21
MF 22
MN 22
MSX 22
Industrial Process
D800 23
MEN 23
MENBLOC 23
ME 24
DS 24
SMP 24
SMX 25
F-Line 25
MVE 25
9
Mark 3 ASME Standard Mark 3 Lo-Flo Mark 3 Unitized
Self-Primer
Overhung – Chemical Process
15
HPX (OH2) HPXM (OH2) PHL (OH2)
Centerline Mounted Centerline Mounted, Centerline Mounted
Low Flow
Overhung – API Process
18
M R Titan Slurry
Hard Metal, Radially Split, Heavy-Duty,
Abrasive Slurry Rubber Lined Slurry Radially Split, Lined
Related Configurations
• PL-C cantilever, chemical
slurry sump
• LC-S lineshaft, chemical
slurry sump
20 See Bulletin PS-10-11
FRBH FRBHJC MPT
Heavy-Duty Paper Stock Cantilever Sump Self-Priming,
and Process Solids Handling
Related Configurations
• FRBHJC cantilever sump
• FRBHJ sump
24
SMX F-Line MVE
Non-Metallic End Suction, Multistage End Suction
Standard Motor
25
Between Bearings Pumps
Single Case - Axially Split -
Single Stage
LR 28
LNN 28
27
LR LNN DVSH (BB1)
Axially Split, Single Stage Axially Split, Single Stage Axially Split, Single Stage
OverhungBearings
Between – General
– Industry
Single Case - Axially Split - Single Stage
OverhungBearings
Between – General
– Industry
Single Case - Axially Split - Single Stage
Standards
• ISO 13709/API 610 (BB1), latest ed.
Operating Parameters
• Flows to 15 000 m3/h (65 000 gpm)
• Heads to 250 m (820 ft)
• Pressures to 25 bar (365 psi); 50 bar
(725 psi) with LPN-H model
• Temperatures from -80°C (-110°F)
to 150°C (400°F)
Features
• Double volute, near-centerline
supported casing
• ASME (ANSI) B16.5 Class 150 or
Class 300 raised face flanges
• Confined gasket design
• Hydraulically balanced double
suction impeller
• ISO 21049/API 682 seal chambers
• Baseplate designs and pump
packages engineered to contract
• Heavy-duty, bracketed, 180°
supported carbon steel bearing
housing
• Standard non-contacting labyrinth seals
• Choice of bearings
−−Ball radial and ball thrust with oil
flinger system
−−Split leeve radial and ball thrust
with ring oil system
−−Split sleeve radial and tilting pad
thrust with pressure lubrication
Other Configurations
• LPN-H high-pressure, double suction
• LPN-V vertical in-line
OverhungBearings
Between – General
– Industry
Single Case - Radially Split - Single Stage
Standards Standards Standards
• ISO 13709/API 610 (BB2), latest ed. • ISO 13709/API 610 (BB2), latest ed. • ISO 13709/API 610 (BB2), latest ed.
OverhungBearings
Between – General
– Industry
Single Case - Radially Split - Multistage
Standards Standards Standards
• Flowserve • Flowserve • Flowserve
33
CS WXH
Radially Split, Radially Split, Multistage,
Multistage, Ring Section High Pressure,
Ring Section
OverhungBearings
Between – General
– Industry
Single Case - Radially Split - Multistage
Standards Standards
• Flowserve • Flowserve
34
WXB and WXB-B WNC CSB
Diffuser Casing, Diffuser Casing, Diffuser Casing,
Multistage, Process Barrel Multistage, Utility Barrel Multistage, Utility Barrel
OverhungBearings
Between – General
– Industry
Double Case
Standards Standards Standards
• ASME Section VIII • ASME Section VIII • ASME Section VIII
OverhungBearings
Between – General
– Industry
Double Case
Standards Standards Standards
• ISO 13709/API 610 (BB5), latest ed. • ISO 13709/API 610 (BB5), latest ed. • ISO 13709/API 610 (BB5), latest ed.
Vertical Pumps
VCT 41
AFV 41
CVP 41
Double Case
QLC 42
QLQC 42
VPC 42
WUC 42
APKD 43
Submersible
Pleuger SUBM 44
Byron Jackson SUBM 44
MSX 44
Slurry and Solids Handling
MVX 45
MFV 45
MNV 45
FRBHJC 46
MJ 46
MJC 46
RJ 46
RJC 46
Terra-Titan 47
MSX 47
Drain-Titan 47
Sump
CPXV Chemical Sump 48
ESP3 Chemical Sump 48
PolyChem VGRP 48
Drain-Titan 49
VSMP 49
ECPJ 49
39
WUJ (VS1) VTP QL and QLQ
Vertical Lineshaft, Vertical Turbine Vertical, Double Suction,
Multistage Twin Volute
Vertical – Wet Pit
Operating Parameters
• Flows to 4600 m3/h (20 200 gpm)
• Heads to 500 m (1640 ft)
• Pressures to 50 bar (725 psi)
• Temperatures from -45°C (-50°F)
to 95°C (200°F)
• Speeds to 1800 rpm
Features
• Double suction first stage impeller
• Double case construction
• Impellers keyed with lock collars
• Twin-volute casing
• Heavy-duty discharge head
• Open lineshaft construction
• Flanged column assembly with
bearing retainers
• Large shaft with keyed lineshaft
couplings
• Mechanically sealed
• Rigid, adjustable flanged coupling
• Solid shaft motor with NEMA or IEC
thrust bearing
• Optional suction can drain
Related Configurations
• APKC single suction design
43
Pleuger SUBM Byron Jackson SUBM MSX
Deep-Well Submersible Deep-Well Submersible Solids Handling,
(Water-Filled Design) (Oil-Filled Design) Submersible
Vertical – Submersible
47
CPXV ESP3 PolyChem VGRP
Chemical Sump Chemical Sump Engineered Polymer
Composite Sump
Vertical – Sump
Vertical – Sump
Standards Standards Standards
• Flowserve • Flowserve • ISO 13709/API 610 (VS4), latest ed.
Positive Displacement
Screw
TSP 53
MP1 53
MP1 Systems Packaging 53
Reciprocating
YHT 54
HS 54
VTE 54
VQE 54
V 54
VSE 54
51
GR Series GA Series Gearex
Double Helical, Gear Cast Iron, Double Helical,
Double Helical, Gear Timed Gear
OverhungDisplacement
Positive – General Industry
– Gear
OverhungDisplacement
Positive – General Industry
– Screw
Standards Standards Standards
• API 676, latest ed. • API 676, latest ed. • Flowserve
• ASME
Operating Parameters Operating Parameters
• Flows to 2550 m3/h (11 200 gpm) • Flows to 1990 m3/h (8750 gpm) Features
• Pressures to 100 bar (1450 psi) • Pressures to 50 bar (720 psi) • Standard or custom engineered
• Temperatures to 450°C (850°F) • Temperatures to 450°C (850°F) system packaging available
• Speeds to 1800 rpm • Speeds to 2000 rpm • Driver options
• Viscosities to 200 million ssu • Viscosities to 8000 cp −−Electric motor
• Slurry concentrations to 70% • Multiphase pumping to 100% GVF −−Electric motor with variable speed
by weight (gas void fractions) drive (VSD)
−−Diesel or natural gas engine
Features Features • Complete piping systems
• Positive displacement • Non-contacting design with −−Suction, discharge, bypass and
timed two-screw one-piece pump shafts recycle piping
• Double suction design • Three pumping locks for low −−Block valves, control valves and
• Split bearing bracket for ease pulsation flow check valves
of maintenance • Through-bolt bearing bracket design −−Filters and strainers
• Versatile ISO 21049/API 682 • ISO 21049/API 682 seal chamber −−Pressure, temperature and flow
compliant stuffing box design with split brackets accommodates instrumentation
• Integral or pinned screw elements single and double cartridge seals • Complete, integrated control systems
• Spur-tooth timing gears • Double suction design with low −−PLC based
• Chrome-plated pump bores NPSH capability −−Controls for pump, valves, instru-
• Options • AGMA 11 helical timing gears mentation and alarms, VSD, etc.
– Fully external bearings and • Chrome plated bores and hard −−Motor control center
timing gears coated screws • Single and multiple skid options
– Internal bearings and timing gears • Options for integration of controls, pump
– Temperature control packages −−Multiple hard coatings for bores and piping
– Hopper-top construction and screws • Special enclosures for arctic-
– Vertical barge configuration −−Choice of materials, including NACE like conditions or other harsh
– Choice of materials −−Customized pitch environments
– Multiple hard coatings for bores −−Customized packaging
and screws −−Variable speed drive
−−Natural gas or diesel engine drive
See Bulletin PS-60-1
Other Configurations
• High pressure: 100 bar (1450 psi)
Standards Standards
• API 674, latest ed. • API 674, latest ed.
• ASME section III • ASME section III
Features Features
• Self-aligning plungers • Outboard packed inverted design
• Sectionalized fluid end components • Easily accessible stuffing box
• Fully enclosed power end with • Integrated suction and discharge
generous oil reservoir manifold
• Independent crosshead extension rod • Complete separation of liquid end
• Integrally cast and precision machined from power end
cylindrical crosshead guides • Valve design suitable for conditions
• Triple lip seal at crosshead extensions of service
• Fully reversible crankshaft for V-belt • Spherical feature for plunger alignment
drive or direct coupling • Power-end maintenance
• Stuffing box assemblies individually inspection covers
bolted to fluid cylinder • Forced feed lubrication
• Splash-type or full pressure • Options
lubrication system −−Spring loaded packing
• Threaded primary drain −−Pulsation dampeners
• Options −−Sectionalized fluid ends
– Overhead motor mounting
– Spring loaded stuffing box See Bulletin PS-70-1
– Discharge pulsation dampeners
55
Specialty Products
Nuclear Pumps and Seals
DFSS 58
DVSS 58
N-Seals 58
WDF 58
Specialty Products
DVSR 59
CN 59
HDR 59
CA 60
CAM 60
CAV 60
EG 61
MEV 61
Extreme Temperature
WUC-LNG Cryogenic 62
VKW Cryogenic 62
TKW Cryogenic 62
Byron Jackson 62
SUBM Geothermal
Others
Hydraulic Decoking Systems 63
Pleuger WFSD 63
Azimuthing Thruster
DWEER™ 64
ERT 64
CVP 64
Barge Pump 65
Molten Salt VTP 65
57
DFSS and DVSS N-Seals Nuclear WDF Nuclear
Nuclear Radially Split, Mechanical Seals Vertical, Single Stage
Single Stage
Overhung Products
Specialty – General
– Nuclear
IndustryPumps and Seals
58
DVSR Nuclear CN Nuclear HDR Nuclear
Radially Split, Volute Radially Split, Diffuser Radially Split, Volute
Casing, Single Stage Casing, Single Stage Casing, Single Stage
Overhung Products
Specialty – General
– Nuclear
IndustryPumps and Seals
Standards Standards Standards
• ASME Section VIII • ASME Section VIII • ASME Section VIII
59
CA Nuclear CAM Nuclear CAV Nuclear
Diffuser Casing, Diffuser Casing, Vertical, Double Case,
Multistage, Utility Barrel Multistage, Utility Barrel Multistage
Overhung Products
Specialty – General
– Nuclear
IndustryPumps and Seals
60
EG Nuclear MEV Nuclear
Radially Split, Double Vertical, Single Stage
Suction
Overhung Products
Specialty – General
– Nuclear
IndustryPumps and Seals
Standards Standards
• ASME Section III, Class 3 • ASME Section III, Class 3
Features Features
• Cast volute casing • Cast casing and cover
• Double cover design • Bottom suction, horizontal discharge
• Double suction impeller configuration
• Centerline mounting • Single stage, enclosed impeller
• Side suction and side discharge • Fabricated motor stand
located above the mounting feet • Cartridge mechanical seal
• Cartridge mechanical seal • Radial roller and double ball
• 360° bearing housings thrust bearings
• Ball radial and ball thrust bearings • Grease lubricated bearings
61
WUC-LNG Cryogenic (VS6) VKW and TKW Cryogenic Byron Jackson SUBM
Vertical, Double Case, Liquid Expander (VS6) Geothermal Deep-Well
Multistage Double Case, Multistage, Submersible
Electric Generator
Overhung Products
Specialty – General
– Extreme
IndustryTemperature Pumps
Overhung Products
Specialty – General
– Others
Industry
Flowserve Automated Hydraulic • Provides greater system automation Standards
Decoking Systems and improved efficiency while • Flowserve
• Increase delayed coking unit (DCU) improving operator safety, reducing
capacity and improve operator safety cycle time and easing maintenance Applications
• Installed in more than 95% of • Mode shifting helps to free impeded • Semi-submersible drilling rigs
the world’s DCUs tools from slumped beds • Floating production, storage and
• Complete systems with virtually all offloading vessels
equipment needed to operate and Advanced Cutting Control • Drill ships
control the hydraulic decoking process • Complete systems and enclosures • Crane vessels and pipelay vessels
• Extensive aftermarket support to monitor and control the operations
including specialists to evaluate • Continuous feedback signals Features
system performance, improve indicate equipment and drum status • Up to 5 m (16.5 ft) propeller diameter
reliability, and recommend operational (i.e., position in drum, rotational • Up to 4500 kW (6000 hp) input
and safety best practices speed, wore rope tension, etc.) • 4- or 5-blade fixed pitch propeller
• Embedded intelligence to process • 7° tilted propeller shaft
Complete Coke Cutting Systems data for monitoring and control; −−Propulsion and steering with thrust
• Jet pump train: ISO 13709/API 610 operator interface only required in any direction
(BB5) jet pump, driver, lube oil skid for sequence exception −−Minimal thruster-hull and
and control system panel • Video and acoustic equipment to thruster-thruster interaction for
• Coke cutting system: decoking monitor cutting deck operations and higher net thruster output
control valve, AutoShift™ combination coke chute conditions −−Mounting and dismantling
cutting tool, rotary joint, isolation and • Remote winch and rotary joint underwater without dry-docking
bleed valves, drill stem, tool guide and operation −−Customization to meet specific
enclosure and high-pressure hose • Remote sensing of cutting jet application needs
• Cutting assembly lifting system: impingement on the coke drum • Duplex thrust bearing allows
crosshead, free-fall arresters, winches • Interlocking safety systems windmilling at any speed
and winch controls, pulley blocks, • IPS APEX™ data monitoring, • Automatic pressure compensation
and latch mechanism to stow transmission and control systems system adapts differential pressure
the crosshead to draft
• Automation, controls and Online Assurance Programs • Fully flooded gear housing provides
instrumentation • Access to data aggregation tools via optimum lubrication
the Technology Advantage™ Portal • Easy underwater mounting; secured
AutoShift Combination Cutting Tool • Enable experts to monitor, diagnose during installation by hydraulically
• Removes the operator from the and communicate operating operated locking mechanism
cutting deck solutions to increase unit uptime • Fully redundant closed-loop hydraulic
• Mode shifting is accomplished steering system as standard
automatically and remotely by water See Bulletin PS-90-6
pressurization and depressurization See Bulletin PSS-90-8.1
63
DWEER TM ERT CVP
Dual Work Exchange Energy Recovery Turbine Vertical, Concrete Volute
Energy Recovery
Overhung Products
Specialty – General
– Others
Industry
64
Barge Pump Molten Salt VTP
Overhung Products
Specialty – General
– Others
Industry
Standards Standards
• Flowserve • Flowserve
Related Configurations
• FRBHJC cantilever sump
• CPXV chemical sump
Additional Information
67
Flowserve Integrated Solutions Group
Reduce life cycle costs. It’s About the Bottom Line
Manage assets more efficiently. Flowserve ISG helps customers take advantage
of a focused set of aftermarket capabilities and
Increase plant uptime. technologies developed to derive greater value from
their plant investments. Through the application of
Enhance workforce skills. engineering know-how, industry-specific expertise,
comprehensive training capabilities and advanced
technologies, Flowserve helps customers focus on
Whether in a refinery, power plant or chemical the issues that have the greatest potential to improve
their bottom lines.
complex, these ideas are taking hold as plant
operators intensify their focus on maximizing
Flowserve ISG helps customers achieve:
plant profitability. Historically, applying these con-
• Plant output optimization through increased
cepts to pumps and pumping systems has been equipment availability
achieved through reactive aftermarket programs. • Energy reductions at the plant, unit or
The Flowserve Integrated Solutions Group (ISG) is equipment level
dedicated to helping customers proactively apply • Equipment optimization by increasing mean
the principles of life cycle cost savings, asset opti- time between repair (MTBR) or by optimizing
performance for actual system requirements
mization and equipment availability to pumps and
• Workforce skill set development for technical,
pumping systems. maintenance and operations resources
• Environmental protection
• Safety and health protection
• Cost reductions through inventory and
procurement optimization
68
flowserve.com
70
flowserve.com
Reference Sources
Pump Industry Standards Cameron Hydraulic Data
To learn about industry standards pertaining to the First published in 1926 and now in its 19th edition,
design and performance of pumps contact the following the Cameron Hydraulic Data book is an indispens-
organizations: able aid to engineers involved with the specification,
• American Petroleum Institute (API) selection and application of pumping equipment.
www.api.org This comprehensive reference tool includes:
• Hydraulic principles and formulae
• American Society of Mechanical Engineers
• Friction data
(ASME – ANSI) www.asme.org
• Properties of common liquids
• American Society of Testing and Materials (ASTM) • Steam and electrical data
www.astm.org • Weights, dimensions, and ratings of pipe
• European Sealing Association (ESA) flanges and fittings
www.europeansealing.com • Metric conversions
• Europump To obtain a copy of the Cameron Hydraulic Data
www.europump.org book visit: www.cameronbook.com.
• Deutsches Institut für Normung (DIN)
www.din.de/ Pump Engineering Manual
• Fluid Sealing Association (FSA) This publication is devoted to explaining centrifugal
www.fluidsealing.com pump principles. It covers the basics from applica-
• Hydraulic Institute (HI) tion analysis and affinity laws through hydraulics
www.pumps.org and mechanical phenomena to troubleshooting.
• International Organization for Standardization (ISO) To obtain a copy of the Pump Engineering Manual
www.iso.org visit: www.cameronbook.com.
PROS+
PROS+ proposal and order system is the most compre-
hensive and user-friendly pump selection program in
the industry. This software ensures correct sizing and
selection of Flowserve pumps to best suit your process
application needs.
PROS+ is available from your local sales representative
or on-line at www.flowserve.com. 71
Index
A L
DVSR (nuclear) . . . . . . . . . . . . . . . . . . . . . . . 59
AFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DVSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
APKC (See APKD). . . . . . . . . . . . . . . . . . . . . . . 43 LLR (See LR). . . . . . . . . . . . . . . . . . . . . . . . . . . 28
DWEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
APKD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 LNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
E LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
B LRV (See LR). . . . . . . . . . . . . . . . . . . . . . . . . . . 28
EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Barge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 LPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ECPJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
BCV (see CVP). . . . . . . . . . . . . . . . . . . . . . . 41, 64
EG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 M
ERPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
BSV (see CVP). . . . . . . . . . . . . . . . . . . . . . . 41, 64 M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ERT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Byron Jackson SUBM (Oil-Filled Design). . . 44 Mark 3 ASME Standard. . . . . . . . . . . . . . . . 10
ESP3 Chemical Sump . . . . . . . . . . . . . . . . . 48
Mark 3 In-Line . . . . . . . . . . . . . . . . . . . . . . . . 11
C F Mark 3 Lo-Flo. . . . . . . . . . . . . . . . . . . . . . . . . 10
CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Mark 3 Recessed Impeller . . . . . . . . . . . . 11
F-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Mark 3 Unitized Self-Primer. . . . . . . . . . . 10
FRBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CAV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FRBHJC . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 46
CHTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 G MENBLOC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CPX3 Close Coupled. . . . . . . . . . . . . . . . . . . 13 GA Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 MEV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CPX3 ISO Standard. . . . . . . . . . . . . . . . . . . . 12 Gearex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CPX3 Self-Priming . . . . . . . . . . . . . . . . . . . . 12 GR Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 MFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
CPX3 Recessed Impeller . . . . . . . . . . . . . . 12 Guardian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 MJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
CPXS Magnetic Drive. . . . . . . . . . . . . . . . . . 13 MJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
CPXV Chemical Sump. . . . . . . . . . . . . . 13, 48 H MN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 HDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MNV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
CSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 HDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 64 HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 MNR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Molten Salt VTP. . . . . . . . . . . . . . . . . . . . . . . 65
D HDX-TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 MP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
D800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 HED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MP1 Systems Packaging . . . . . . . . . . . . . . 53
DFSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 HED-DS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DMX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 HPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Drain-Titan. . . . . . . . . . . . . . . . . . . . . . . . 47, 49 HPXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MSP2 (See MSP). . . . . . . . . . . . . . . . . . . . . . . . 18
DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 HS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 MSX. . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 44, 47
DSVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 HSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DVSH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 HSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MVX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DVSR (non-nuclear). . . . . . . . . . . . . . . . . . . 31 HWMA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HWMA2 (See HWMA). . . . . . . . . . . . . . . . . . . . 17
72 Hydraulic Decoking Systems. . . . . . . . . . . 63
flowserve.com
N S W
NM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 SMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 WCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
N-Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 SMX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 WD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SUBM WDF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
P (See Bryon Jackson SUBM or Pleuger SUBM) . . 44 WDX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PHL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 WFSD Thruster
Pleuger SUBM (Water-Filled Design) . . . . 44 (See Pleuger WFSD Azimuthing Thruster) . . . . . 63
T
Pleuger WFSD Azimuthing Thruster. . . . 63 WIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Terra-Titan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Polybase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 WMA (See HWMA) . . . . . . . . . . . . . . . . . . . . . . 17
Titan Slurry. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PolyChem GRP . . . . . . . . . . . . . . . . . . . . . . . 14 WMA2 (See HWMA). . . . . . . . . . . . . . . . . . . . . 17
TKW Cryogenic Liquid Expander. . . . . . . 62
PolyChem M-Series. . . . . . . . . . . . . . . . . . . 15 WNC-HP (See WNC). . . . . . . . . . . . . . . . . . . . . 35
TSP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PolyChem S-Series. . . . . . . . . . . . . . . . . . . . 14 WNC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PolyChem VGRP . . . . . . . . . . . . . . . . . . . 14, 48 U WTB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Polyshield . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 WUC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
UZDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
PVML. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 WUC-LNG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
PVXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 V WUJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 WX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Q WXB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
VCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
QL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 WXB-B (See WXB) . . . . . . . . . . . . . . . . . . . . . . 35
VKW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
QLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 WXH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
VPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
QLQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
VQE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
QLQC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Y
VSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
YHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
R VSMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
VTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
RJC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
73
USA and Canada
Flowserve Corporation
5215 North O’Connor Blvd.
Suite 2300
Irving, Texas 75039-5421 USA
Telephone: 1 937 890 5839
Latin America
Flowserve Corporation
Boulevard del Cafetal
Edificio Ninina, Local 7
El Cafetal - Caracas
Venezuela 1061
Telephone: 58 212 985 3092
Telefax: 58 212 985 1007
Asia Pacific
Flowserve Pte. Ltd.
10 Tuas Loop
Singapore 637345
Telephone: 65 6771 0600
Telefax: 65 6779 4607
flowserve.com