Professional Documents
Culture Documents
Q3 A beam carries a factored SF of 380 kN and a factored torsional moment of 85 kNm. The beam has a cross-section
of 450 x 600 mm (effective cover = 60 mm). Using M20 concrete, is it required to revise beam dimensions? τc,max =
2.78 MPa. No marks without showing calculations (1)
Q4 The factor of safety on reinforcing steel in Working stress method is _______________ (1)
Q5 A circular column of 500 mm overall dia and effective cover to bars 90 mm uses 8 bars of 16 mm dia distributed
uniformly around the circumference as reinforcement. Is the bar spacing in accordance with IS:456 guidelines?No
marks without showing calculations. (1)
Q7 A column of size 550 mm x 750 mm and a unsupported length 4 m carries a factored axial load of 2600 kN, with
the larger lateral dimension oriented along x-axis. The column carries a factored moment of 160 kNm about the x-
axis. The ecentricity may be neglected only if emin in any direction is less than 5% of the corresponding lateral
dimension. The factored design moments about x-axis and y-axis are respectively: (No marks without showing
calculations) (2)
Q8b) The minimum value of the interaction factor αn in biaxial bending design of column is ________ (1)