Professional Documents
Culture Documents
IR REMOTE CONTROLER
YB1FA
Contents
1 User notice������������������������������������������������������������������������������������������������������ 1
4 Replacement of Batteries�������������������������������������������������������������������������������� 5
Wireless Remote Controller YB1FA
1 User notice
CAUTION !
① Make sure there is no obstruction between the wireless remote controller and the signal
receiver.
② The signal receiving distance of the wireless remote controller can be up to 10 metres.
④ Never let any liquid flow into the wireless remote controller.
⑤ Never expose the wireless remote controller under the sunlight directly or where it is very
hot.
⑥ This is a general remote control, it could be used for multiple types (functions) of air
conditioners. For some models without the functions specified here, we preserve the right to
not to inform exclusively.
Note: This remote controller
is universal and can be used
for multi‐functional air
conditioning. If the button on
the remote controller with
HOUR
the function which the air
ONOFF
conditioner doesn’t have is
pressed, the unit remains in
its original operating mode.
2 3
4
5 6
7 8
10
9 11
12
13 14
1
Wireless Remote Controller YB1FA
Signal
1 transmitter
●● Signal transmitter
●● Press this button, and the unit will be turned on; press it once more, and the
ON/OFF
2 unit will be turned off. When turning off the unit, the Sleep function will be
button
canceled, but the presetting time is still remained.
●● By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected
circularly. Auto mode is default after power on. Under the Auto mode, the
setting temperature will not be displayed; Under the Heat mode, the initial
MODE
3 value is 28°C (82°F);Under other modes, the initial value is 25°C(77°F).
button
AUTO ; COOL; DRY; FAN; HEAT (only for cooling and heating unit)
●● By pressing this button, Auto, Low, Middle, High speed can be circularly
selected. After power on, Auto fan speed is default.
AUTO
●●
5 FAN button Low speed
Middle speed
High speed
Note: Under the DRY mode, the fan will be kept running at the low speed
and the fan speed isn't adjustable.
2
Wireless Remote Controller YB1FA
●● Press this button to set up the swing angle, which circularly changes as below:
●● When the guide louver starts to swing up and down, if SWING funtions
is canceled, the air guide louver will stop and remains at the current
SWING position.
6 UP/DOWN ●● indicates the guide louver swings up and down among those five
button directions.(Simplified SWING function applicable for some Fan Coil Units:
When the wireless remote controller is energized initially with the unit
under the OFF status, it should be set by pressing the + button and the
SWING button simultaneously, with the symbol blinking twice. Then,
after the unit is turned on, this function can be activated by pressing the
SWING button, with the displayed symbol indicating swing function is
on and without this displayed symbol indicating swing function is off.)
3
Wireless Remote Controller YB1FA
4
Wireless Remote Controller YB1FA
heating quickly so that the ambient temperature will approach the preset temperature as soon as
possible.
●● About lock
Press + and - buttons simultaneously to lock or unlock the keyboard. If the wireless remote
controller is locked, the icon will be displayed on it, in which case, any press will get no response
but with the mark blinking for three times. If the keyboard is unlocked, the mark will disappear.
●● About SWING UP/DOWN
① Press the Swing Up/Down button for more than 2 seconds and then the louvre will swing up
and down. After releasing the button, the louvre will stop swinging and keep the current status.
② When the louvre starts swinging, by pressing the Swing Up/Down button 2 seconds
later, the louvre will stop swinging directly; while, by pressing the Swing Up/Down button within 2
seconds, the louver will keep swinging.
●● About Change over switch between Fahrenheit and Centigrade
Under the OFF state of the unit, press MODE and - buttons simultaneously to switch between
°C and °F.
4 Replacement of batteries
1 Slightly press the place with along the arrowhead direction and push the back cover of
the wireless remote controller.
2 Take out the used batteries.
3 Insert two new AAA 1.5V dry cell batteries and pay attention to their polarity.
4 Put back the cover of the wireless remote controller.
3
2
Notes!
① When changing the batteries, do not use the used or different-type batteries, otherwise, it
would cause some malfunction to the wireless remote controller.
② If the wireless remote controller will not be used for a long time, please take them out, and
don’t let the battery liquid damage the wireless remote controller.
③ The operation should be within the signal receiving range.
④ It should be placed 1m away from the TV set or stereo sound sets.
⑤ If the wireless remote controller can not operate normally, please take batteries out for 30s.
If the anomaly persists, please change them.
⑥ The battery must be removed from the appliance before it is scrapped.The batteries is to be
disposed of safely.
5
Take-back of electrical waste
Information for Users to Disposal of electrical and electronic equipment
(private households)
Icon on the product or in the accompanying documentation means that used electric or electronic products
must not be disposed together with domestic waste. For the correct disposal of the product hand it over to a
place for take-back, where it is collected free of charge. By correct disposal of the product you can help to
preserve valuable natural resources and help in preventing potential negative impacts to environment and
human health, which could be consequence of incorrect disposal of waste. Ask for more details from local
authorities, nearest collection point, in Waste Acts of respective country, in the Czech Republic in Act no.
185/2001 Coll., in the wording of later regulations. In case of incorrect disposal of this waste, a fine can be
imposed according to national regulations.
Manufacturer:
Sinclair Corporation Ltd., 1-4 Argyll Street,
London W1F 7LD, UK