You are on page 1of 1

Technical Services Bass Point

ABN 90 009 679 734


Boollwarroo Parade Shellharbour NSW 2529
PO BOX 4022 Shellharbour NSW 2529
Phone: (02) 4296 6185
Fax: (02) 4296 1024
web: www.hanson.com.au

Report No: MAT:BAS17-01294-Q01


Material Test Report Issue No: 1
This report replaces all previous issues of report no 'MAT:BAS17-01294-Q01'.

Accredited for compliance with ISO/IEC 17025 -


Client: BASS POINT QUARRY Testing

Boollwarroo Parade
Shellhabour NSW 2529

Project: BASS POINT QUALITY CONTROL


NATA Accredited Approved Signatory: Ben Tidswell (Laboratory Technician)
Laboratory Number:
415 Date of Issue: 1/12/2017
THIS DOCUMENT SHALL NOT BE REPRODUCED EXCEPT IN FULL

Sample Details Particle Size Distribution


Sample ID: BAS17-01294-Q01 Method: Grading [AS 1141.11.1]
Client Sample ID: BAS17-01294-Q01 Drying by: Oven
Date Sampled: 29/11/2017
Source: BASS POINT QUARRY
Material: 10MM SINGLESIZE AGGREGATE Note: Sample Washed
Sampled From: Quarry Stockpile
Sampling Method: AS1141.3.1 Clause 9.3 Sieve Size % Passing Limits
Specification: 10SS-BAS 13.2mm 100 100
Location: Quarry Stockpile - 10mm Single Size (West Pit) 9.5mm 97 75 - 95
Sampled By: Ben Tidswell 6.7mm 30 10 - 40
Lot Number: Current Production 4.75mm 1 0-5
2.36mm 1 0-5
1.18mm 1 0-1
Other Test Results 75µm 1 0-1
Description Method Result Limits
Finer 75µm [AS 1141.12]
Finer 75µm (%) 1
Drying Method Oven
Average Least Dimension [AS 1141.20.1]
Average Least Dimension (mm) 5.1 ³5.0

Chart

Comments
N/A

Form No: 18909, Report No: MAT:BAS17-01294-Q01 © 2000-2016 QESTLab by SpectraQEST.com Page 1 of 1

You might also like