Name of work: Consulting Services for Design and supervision Consultant- Bridges (Package No.
UDRP/R&B/AF/DSC/B/01).
1. Scope of work for Design of Bridges.
Scope of work shall be as per TOR of above project which has already been given to you and be not limited to the following major tasks:-
1. To prepare GAD, designs & working drawings of bridges.
2. To provide design criteria/detailed design calculations, in support of each design, analysis including preparation of working drawing 3. To prepare detail of measurements, bill of quantities and estimate on existing central SOR of PWD. 4. The scope of also includes the design of erection / launching scheme along with all relevant working details. (The design of bridges should be in accordance to the standard codes of practices and specifications) 5. Providing working drawings (with soft copies in AutoCAD format)/detailed calculations/specifications/erection/launching scheme for each standard span and for each type of bridge. 6. Review and Finalization of appropriate alignment and span arrangement for the proposed bridge. 7. To participate in meetings related to design and construction of bridges. 8. Support the contractor and field divisions at the time of implementation of designs. 9. To provide safety standards and procedures to be adopted during execution of the project along with a list of do’s and don’ts for the field engineers. 10. The analysis/design of the bridges should be done using latest technology/innovative and cost effective solutions/methodology/latest software tools and the provisions given in national/international codes of practices should be thoroughly followed in designing the bridges and no compromise should be made w.r.t the safety of the bridges to be constructed 11. To prepare Quality Assurance Manual and maintenance manual for the bridges. 12. To provide all references of the codes followed in the design along with the photocopies of relevant pages of codes used as part of D.P.R. 13. The designer shall compulsorily mention the design methodology used in the process of design (like Elastic Design/Ultimate load theory/Limit State Design). 14. While developing the design, Designer shall engage in discussions with field staff and Zonal Chief Engineer, so as to incorporate their suggestions, and resolve field problems. 15. Coordination and liaison with district EAs, contractors, Proof Consultants and other stakeholders involved in the design and construction of bridges. 16. Support the contractor and field divisions at the time of implementation of designs. 17. To provide design basis report (DBS). 18. To do hydraulic calculations for working out discharge of stream/river including deciding HFL for use in design of bridge.
ChatGPT Money Machine 2024 - The Ultimate Chatbot Cheat Sheet to Go From Clueless Noob to Prompt Prodigy Fast! Complete AI Beginner’s Course to Catch the GPT Gold Rush Before It Leaves You Behind
The Complete Guide to Alternative Home Building Materials & Methods: Including Sod, Compressed Earth, Plaster, Straw, Beer Cans, Bottles, Cordwood, and Many Other Low Cost Materials
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial