You are on page 1of 10

Adapter - used for controlling fluid flow,

Bunsen Burner - a small gas burner that


specifically for transporting fluid between
uses an adjustable flame to heat
glassware.
substances.

Alcohol Lamp - used for heating, Buret Clamp - used to hold and secure a

sterilization, and combustion. buret on a stand.

Uses ethyl alcohol or spirit as a fuel.

Buchner Funnel - a device used for


Clamp Holder - used to hold a container of
pressure assisted filtration.
any substance during an experiment.
Crucible Tong - used to safely move a
Clay Triangle - serves as a supporting
crucible that contains potentially dangerous
structure for items being heated on a
materials.
Bunsen burner or other open flame heat

source.

Desiccator - a pot that is used to absorb

Condenser - used to cool hot gases into water vapors from chemical reagents that

liquids. are hygroscopic, which are reagents that

absorb water.

Cork Borer - a metal tool for cutting a hole in


Distilling Flask - used to separate mixtures
a cork or rubber stopper to insert glass
by distillation. It has three parts: a spherical
tubing.
base, a cylindrical neck and sidearm that is

connected to the flask neck.

Filtering Flask/Buchner Flask - used for

filtering samples because the vacuum


Dropper Pipet - used to transfer small
forces the filtrate into the flask, while
quantities of liquids.
residue remains on the filter paper

Fish Tail/Wing Top - used to bend glass as

Erlenmeyer Flask - used for the storing and it spread out the heat over a larger area,

mixing of chemicals. making it more uniform.

Evaporating Dish - used for the evaporation

of solutions and supernatant liquids. Florence Flask - used for heating

substances that need to be heated evenly.


The bulbed bottom allows the heat to

distribute through the liquid more evenly.

Graduated Cylinder - used to get accurate


Geissler Buret - used to deliver a variable
measurements of a liquid volume.
but controllable and measurable quantity of

solution.

Ignition Tube - used to hold small quantities

of substances which are undergoing direct

Glass Funnel - used to channel liquid or heating by a Bunsen burner or other heat

fine-grained substances into containers with source.

a small opening. Glass is used because it

doesn't react with chemicals.

Iodine Flask - an Erlenmeyer flask with a

stopper; it is used for iodine determination.


Iron Ring - used to stabilize flasks mounted Petri Dish - a
to a ring stand. shallow cylindrical glass or plastic lidded

dish that are typically used by biologists

to culture cells.

Mohr Buret - used in analytical chemistry for


pH Meter - measures the hydrogen-ion
the dispensing of variable amount of a
activity in water-based solutions, indicating
chemical solution and measuring that
its acidity or alkalinity expressed as pH.
amount at the same time.

Porcelain Casserole - useful in laboratory


Mortar And Pestle - used for pounding and
for evaporation of solutions, drying,
grinding solid substances to make them into
calcination etc.
smaller particles.
Rubber Tubing - carries the gas to the

Porcelain Crucible - used to hold small burner from the gas tap on the laboratory

amounts of chemicals during heating at high bench.

temperatures.

Porcelain Spatula - used in laboratory


Separatory Funnel - used to separate
applications where scratching delicate
liquids which do not dissolve in one another.
surfaces is undesired as well as scooping

up small quantities of powder.

Rubber Aspirator - used for moving air,


Serological Pipet - transparent, hollow,
fluids, etc. by suction.
cylindrical devices for transferring liquids in

a lab setting.
Spatula - used to take and handle small
Test Tube - used by chemists to hold, mix,
quantities of solid chemicals.
or heat small quantities of solid or liquid

chemicals, especially for qualitative

experiment sand assays.

Spot Plate - used to perform reactions on a

very small amount of materials.

Test Tube Brush - a brush made of nylon

used to clean test tubes.

Stirring Glass Rod - used to mix chemicals

and liquids.

Test Tube Holder - used to hold a test tube

while heating.
Test Tube Rack - used to hold/support test

tubes containing chemicals waiting for Triple Beam Balance - a type of balance

further operations. used to determine the mass (by weight

comparison) of samples.

Thermometer - a device that measures Tripod - a three-legged equipment used to


temperature or temperature gradient. support and hold glassware.

Triangular File - used to stir chemicals, as


Volumetric Flask - used for measuring
well as to scratch glass tubing before
volume in the preparation of solutions and
breaking it.
holds a precise amount of liquid material

when at room temperature.

Watch Glass - a piece of glass used as a

surface to evaporate a liquid, to hold solids

while being weighed, or as a cover for a

beaker.
Volumetric Pipet - allows extremely

accurate measurement of the volume of a

solution. It is calibrated to deliver accurately

fixed volume of dilute appearing solution.

Weighing Bottle -

glass laboratory equipment used for

precise weighing of solids.

Wash Bottle - used to rinse various pieces

of laboratory glassware.

Wire Gauze - used to support a container

during heating.
Beaker - a cylindrical container with a flat
Analytical Balance - measures masses to
bottom. Most also have a small spout (or
within 0.0001 g
"beak") to aid pouring. Used to hold and

heat liquids.

Hot Plate – Used for heating beakers,

Erlenmeyer flasks, and other flat-bottomed

containers.

Iron Stand - used to hold the iron ring and

supports.

Pinchcock - used to regulate or close a

flexible tube, especially in laboratory

apparatus.

You might also like