Professional Documents
Culture Documents
This document contains proprietary and trade secret information and is given to
the receiver in confidence. The receiver by reception and retention of the docu-
ment accepts the document in confidence and agrees that, except as with the prior
expressed written permission of Waukesha Engine, Dresser, Inc., it will; (1) not
use the document or any copy thereof or the confidential or trade secret informa-
tion therein; (2) not copy or reproduce the document in whole, or in part without
the prior written approval of Waukesha Engine, Dresser, Inc.; and (3) not disclose
to others either the document or the confidential or trade secret information con-
tained therein.
All sales and information herein supplied subject to Standard Terms of Sale, in-
cluding limitation of liability.
Table of Contents
ENGINE BASE KITS & GROUPS................................................................................................................ 5
GENERAL TOOLS..................................................................................................................................... 21
ATGL® TOOLS........................................................................................................................................... 35
VHP® TOOLS............................................................................................................................................ 49
APG™ TOOLS........................................................................................................................................... 63
VGF® TOOLS............................................................................................................................................ 81
VHP® Tools
Standard VHP Gas G/GSI/GSID - Inline and VEE engine
GROUP 1 473029 Damper Fluid Sample Kit (Inline Only) (Hasse & Wrede)
A295137 Main Bearing Turning Device
A295138 Thrust Bearing Turning Device
GROUP 3
A295140 Connecting Rod Hydraulic Jacks
A295322 Camshaft Mounting Device
GENERAL TOOLS
The tools in this section of the cata-
log can be applied to more than one
Waukesha engine model series.
Tools for specific engine model se-
General
ries can be found in their respective
sections.
Spark Plug Gapping Tool Spark Plug Spreading Tool Spark Plug Wrench
Tool No. 494422 Tool No. 475006 Tool No. 475008
(.018 - .022 Standard) This tool spreads the side electrodes. Custom designed plug socket (with 10”
Designed to gap the Champion spark It is especially handy on Champion pinned extension) for CSA, shielded
plugs with four side electrodes. Slips RM77N four electrode plugs. ignition spark plugs (7/8” hex). It grabs
over the center electrode and the side the plug’s inside diameter at the upper
electrodes are bent into the tool, gap- end. This tool fits the following plugs:
ping the plug to specification. Not rec- Shielded, CSA (integral coils):
ommended for gapping used plugs. 1/2” reach: 60999H, P (RHM77N)
13/16” reach: 60999V (RHB81N)
Spark Plug Thread And Seat Spark Plug Wrench O-Rings Spark Plug Thread And Seat
Cleaner (18mm 13/16” Reach) Tool No. 475041 Cleaner (18mm 1/2” Reach)
Tool No. 475065 Replacement o-rings (qty. 5) for Spark Tool No. 494087
Services engines with 18mm threads Plug Wrench P/N 475037. Services engines with 18mm threads
and 13/16” reach spark plugs. Current and 1/2” reach spark plugs. Current
production engines are: all VGF, all production engines are: F1197G, VHP,
ATGL and VHP GL (with 13/16” reach G and GSI. Previous VHP GL and pre-
spark plug carriers). vious ATGL engines, if equipped with
1/2” reach carrier.
General
Spark Plug Thread And Spark Plug Extension Puller Ignition Analyzer
Seat Cleaner (14mm) Tool No. 475075 Tool No. 475077
Tool No. 494088 Used for removing spark plug extensions Hand-held battery operated analyzer
Cleans both the threads and seat to as- from all Waukesha engines that feature ideal for diagnosing problems with solid
sure good heat transfer between spark the flange mounted coil. state ignition modules, ignition genera-
plug and cylinder head. tors, coils, shielded and unshielded ig-
Refer to Service Bulletin 15-2812 (or lat-
nition harnesses, and ignition powered
est revision).
instrumentation. Detects problems such
as high voltage insulation breakdown,
low secondary output and coil primary
resistance.
General
CO and HC Analyzer Exhaust Probe - 5-1/2” Exhaust Probe - 9”
Tool No. 475067 Tool No. 494346 Tool No. 494345
For use on any catalyst equipped or The use of an exhaust probe is manda- The use of an exhaust probe is manda-
custom air/fuel ratio controlled engine. tory when taking an exhaust sample. tory when taking an exhaust sample.
Use in conjunction with oxygen analyz- Probe can deteriorate and break after Probe can deteriorate and break after
er. Applicable to all standard gas en- extended use and should be replaced. extended use and should be replaced.
gines for exact setting of air/fuel ratios 494346 is specifically for NA, VHP and 494345 is specifically for turbocharged
and diagnosing engine problems. smaller gas engines. VHP engines.
General
High-Temperature Flourinated Smart Manometer Pi Tape
Grease Tool No. 475072 Tool No. 475038
Tool No. 489341 Microprocessor based, pressure-sensing Circumference tape for measuring diam-
This dielectric grease is used on ignition device that can measure gauge, differen- eters to 0.001”. It consists of a narrow
systems at the spark plug insulator and tial, absolute or vacuum pressures, and metal ribbon with graduations that are
boot. be scaled to English or metric units for read like a vernier scale. The tape mea-
pressure. sures 2” - 12” diameters. Round alumi-
num storage case included.
General
Timing Light - 220V
Tool No. 475071 Cylinder Deglazing Hone Slack Tube Manometer
CSA Class I, Group D, Div. 2 timing light Tool No. 494245 Tool No. 494258
approved for hazardous installations. It Approved for “breaking the glaze” when 36” - may be used with water or mercury
will plug into a Waukesha explosion proof reringing an engine where 6” cylinders for setting gas pressures, checking turbo
receptacle. Includes 30¢ cord and char- are not worn. boost, crankcase pressure, etc.
ger. Special order item requires 12 week
delivery.
Torque Wrench Torque Wrench Kit and Case Adjustable Hook Spanner Set
Tool No. 494273 Tool No. 475019 Tool No. 475066
1/2” drive, click type, 40 to 250 lb. capac- Manufactured by Snap-on exclusively This four piece Spanner wrench kit
ity. Note: All torque wrenches also avail- for Waukesha Engine. Eliminates the (with storage bag) for Deltec carburetor-
able in metric readings. need for purchasing multiple torque equipped engines. Wrenches used to
wrenches to cover the wide range of loosen/tighten the various sized lock nuts
torque values required for the VHP Se- on Main Adjusting Screw (MAS).
ries engines. Contains two torque as-
semblies using a common handle.
Torque ranges: 3/4” drive 200 - 600 ft.
lb., and 1” drive 300 - 900 ft. lb.
General
Hand-Held Digital Tachometer Valve Seat Grinder (220V, 50Hz) Valve Seat Grinder (110V, 60Hz)
Tool No. 494276 Tool No. 475070 Tool No. 494277
Measurement capability 50 to 30,000 rpm Eccentric grinder, diamond dresser, stand, Eccentric grinder, diamond dresser, stand,
accuracy ± rpm. necessary wrenches, and a metal box. necessary wrenches, and a metal box.
With this tool, the grinding wheel has two
rotary motions. Grinding wheel speed is With this tool, the grinding wheel has two
3800 rpm, while making an eccentric mo- rotary motions. Grinding wheel speed is
tion of 15 rpm at the same time, resulting 3800 rpm, while making an eccentric mo-
in “point” grinding. Use of this tool is the tion of 15 rpm at the same time, resulting
only factory approved service method.
Pilots and grinding wheels required. in “point” grinding. Use of this tool is the
only factory approved service method. Pi-
lots and grinding wheels required.
GAS DIESEL GAS DIESEL GAS DIESEL
■ ■ ■ ■ ■ ■
Valve Seat Dial Gauge Magnaflux Dye Penetrant Test Kit Dial Indicator Kit
Tool No. 494278 Tool No. 494283 Tool No. 494288
Graduated in thousandths to show at a Simple spray can application detects Measures in thousandths. Many uses
glance the accuracy of the valve seat af- cracks in engine components. including checking crankshaft end play,
ter grinding. gear backlash and engine alignment.
Kit consists of 4 cans of cleaner, 2 cans
Piolt required for use. of penetrant, and 2 cans of developer,
plus instructions and carrying case.
Compression Tester And Adapter Hand Held Oscilloscope ESM Remote Programming
Tool No. 474035 Tool No. 475078 Tool Kit
Dial registers from 0 to 1000 psi in 50 lb. This handy, easy-to-use, low cost scope Tool No. 489943
increments. Includes adapter. has an LCD display, high sensitivity down This kit includes the phone modem,
to 0.1mV, full auto setup function, 10mHz phone line, power cables, the modem to
sampling rate, 27 DVM readouts with x10, the ECU, and the instruction sheet.
5mV to 20mV/div, 200ns to 1 hour/div
time base, and more. Battery powered.
AC adapter and hard-shell case included.
General
Exhaust Analyzer
Tool No. 472102
This analyzer is used for the adjustment
and emission testing of an engine when
O2, NO and NO2 measurements are re-
quired. This tool is required to set up the
APG 1000 engine.
GAS DIESEL
■ ■
ATGL® TOOLS
ATGL
ATGL Hand Tool Kit
Tool No. 473044
Professional quality inch size hand tools are simply unavailable in many parts of
the world.
Many ATGL customers who intend to do their own service and repair want to have
the necessary tools on location, but don’t desire to invest in more than is neces-
sary.
In response to these needs, Waukesha has developed a kit of specially selected
professional quality tools necessary for the repair and maintenance of ATGL series
engines.
This kit contains 128 pieces including a 40ð wide tool chest:
Tools include:
• Torque wrenches to 1000 ft-lb.
• Metric sockets in 3/8ð, 1/2ð and 3/4ð drive
• Ratchets and extensions
• Selected screwdrivers
• Metric wrenches
• Selected punches and chisels
• Selected pipe wrenches
• Selected adjustable wrenches
• Selected pliers
• Selected prybars
• Selected hammers
Valve Seat Insert Installation Tool Cylinder Head Lifting Eye Connecting Rod Guide Pin
Tool No. 292583 Tool No. 292630 Tool No. 292779
Fitting of the intake and exhaust valve 22 mm lifting eye used for lifting the cylin- Made of nylon and prevents scratching
seat can be accomplished with this tool. der head (includes two). the engine cylinder liner when removing
or replacing the connecting rod.
Replacement Gauge
Tool No. 473036
a
Prechamber Remover Kit Threaded Screw Assembly with Small Collet with Ext. Tube,
Tool No. 494538 (AT25GL) Exp. Rod 1-1/4” – 1-1/2”
Tool No. 473016 (AT27GL) WED Part Number 473020 WED Part Number 473022
ATGL
Extracts the spark plug and precham-
ber. Must be used with hydraulic pump
kit A292539.
For your convenience we are offering
this as a kit and supplying individual
part numbers for replacement purpos-
es (see Part Numbers 473020 through
473028 on pages 31 and 32).
Large Collet, 1-1/2” – 1-3/4” Small Collet, 1-1/4” – 1-1/2” Expanding Rod For Collets
WED Part Number 473023 WED Part Number 473032 WED Part Number 473024
AT25GL AT27GL
■ ■
Main Bearing Turning Device Main Bearing Turning Device Thrust Bearing Turning Device
Tool No. A295137 Tool No. A292587 Tool No. A295138
Turns main bearing shells in and out. Turns main bearing shells in and out. Turns thrust bearing in and out.
ATGL
Inline VEE Diesel GL Inline VEE Diesel GL Inline VEE Diesel GL
■ ■ ■ ■ ■ ■ ■ a ■ ■
Thrust Bearing Turning Device Valve Seat Insert Removing Tool Crankshaft Deflection Gauge
Tool No. A292591 Tool No. A292669 Tool No. A292683
Turns thrust bearing in and out. Extracts intake and exhaust valve seats Measures crankshaft distortion caused
from the cylinder head. by crankcase deflection (metric).
Damper Sample Container Connecting Rod Bearing Connecting Rod Hydraulic Jacks
Tool No. A292693 Installation Tool Tool No. A295140 (Set of 2)
Removes a small sample of the silicone Tool No. A292696A These hydraulic jacks (2) are used for
fluid in the vibration damper. The fluid Correctly positions the connecting rod preloading the studs of the connecting
and sample container is then sent out for bearing shells during installation. rod. Must be used with A292539 hydrau-
analysis. lic pump kit.
ATGL
camshaft is lowered onto this tool and the oil pump, cooling water pump and the and exhaust valves.
rolled out onto the rest notches. diesel fuel delivery pump.
Replacement Hoses Main Bearing Cap Lifting Device Piston, Connecting Rod Lifting
Tool No. 473015 Tool No. AA295135 Device
(4) replacement hoses for cylinder head Lifting device for main bearing caps. Due Tool No. C292774 (AT25GL)
hydraulic mounting fixture AA293268. to the weight of the main bearing caps, Lifts the piston and connecting rod during
this tool is absolutely necessary to work removal and installation. Includes mount-
on the engine safely. ing cap screws and 10 mm carbon clean-
ing tap.
ATGL
Lifts the piston and connecting rod during polishing ring groove in the liner allow-
removal and installation. Includes mount- ing for easier installation (necessary for
ing cap screws and 10 mm carbon clean- production engines built after September,
ing tap. 1999).
Piston Ring Expander (AT25GL) Piston Ring Expander (AT27GL) Anti-Polishing Ring Removal Tool
Tool No. 473031 Tool No. 473018 Tool No. 473019
Eliminates damage caused to piston rings Expands piston rings enough to slip over An adjustable device designed to fit into
by twisting and over expanding. the piston without over-stretching. 3 slots in the anti-polishing ring, allowing
for a firm pulling surface for easier re-
moval of the ring. This tool is used on the
previous AT27GL with the narrow groove
anti-polishing ring.
Compression Tester Adapter Gear Backlash Adjustment Tool Carbon Scraper Kit
Tool No. 472996 Tool No. 473005 Tool No. 473006
18 mm rigid (metal) adapter. Tool mounts onto water pump or oil pump Removes carbon and renews the seat-
for measuring gear backlash. Reference ing surface of the igniter and prechamber
service bulletin 4-2554J and 12-2623B within the cylinder head. Includes pilot.
(or latest revisions) for instructions.
ATGL
pump kit.
Piston Pin Retaining Clip Plier Damper Plug Removal Tool Camshaft Gear Adjusting Tool
Tool No. 494498 Tool No. 473030 Tool No. 473033
This plier is sized right for the large piston Removes Hasse & Wrede vibration Used with 473034 pump kit. Pump is then
pin retaining clip. damper (WED P/N 293835F) fluid sam- used to float gear for timing adjustments
ple hole plug. of camshafts. Reference Service Bulletin
15-2845 (or latest revision).
Refer to Service Bulletin 5-2818 (or latest
revision).
Camshaft Gear Pump Kit Damper Fluid Sample Kit Vibratech Damper Fluid
Tool No. 473034 Tool No. 473029 Sample Kit
High pressure pump kit used with 473033 For collecting damper fluid samples on Tool No. 473035
adapter to float cam gear for camshaft Hasse & Wrede Dampers (P/N 293835F). Used for taking damper fluid samples
timing adjustments. Pump includes tub- Includes sample container, instructions, with Vibratech manufactured vibration
ings, gland nut sleeve and elbow. damper extraction plug, two plug seals, dampers (P/N 293835E). Includes sam-
tech data label and mailing envelope. ple container, instructions, screw with O-
Refer to Service Bulletin 5-2818 (or latest ring, engine information tag.
revision).
ATGL
3 slots in the anti-polishing ring, allow-
ing for a firm pulling surface for easier
removal of the ring. This tool is used on
the current AT27GL with the wide groove
anti-polishing ring.
VHP® TOOLS
The tools in this section are specific
to the VHP Engine series.
VHP
In response to these needs, Waukesha has developed a kit of specially selected profes-
sional quality tools necessary for the repair and maintenance of VHP series engines.
This kit contains 84 pieces including a 12 drawer chest with custom designed drawer
inserts promoting tool management and control. Tool control reduces tool losses, pro-
motes productivity and brings tool investment costs in line with operations.
Tools include:
● Selected combination box-open end wrenches
● Selected socket wrenches (3.8, 1.2 and 1 inch drive sizes)
● Three torque wrenches from 40 to 900 ft. lbs.
● Socket wrench drivers
● Extensions and universal joints
● Breaker bar
● Compothane hammer
● Chisel and punch set
● Roller head pry bar
● Feeler gauge set
● Two dial indicator sets
● Telescoping mirror
● Gasket scraper
● Selected screw drivers
● Selected pliers
● Selected pipe wrenches
● Selected adjustable wrenches
● Ball peen hammer
● Reducer
● Parts cleaning brush
FORM 398 Fifth Edition 49
VHP TOOLS SPECIAL TOOLS CATALOG
Spark Plug Wrench Camshaft Dummy Gear Camshaft Bearing Rollout Tool
Tool No. 167164-D Tool No. 474000 Tool No. 474001
This 1” socket with 10” extension for in- Aluminum “dummy” spacer mounts in Inserts into the camshaft oil hole to allow
stalling spark plugs used with the follow- place of the camshaft drive gear to allow “rolling out” of the lower cam bearing with
ing plugs: easy camshaft endplay adjustment with- the camshaft in place. ‘Tee’ shaped brass
out installing and then reheating the gear tool.
CSA, Shielded, 60999G, N with F.M.
to remove it.
Coils: (RTM-77N with 1” hex) 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore ● ● ●
● ● ●
● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Spark Plug Carrier Remover Tool Water Pump Rebuilding Kit Spark Plug Carrier
Tool No. 474008 Tool No. 474013 Removal Tool
This “easy out” tool removes broken Tool kit for assembly of 6 and 12 cylin- Tool No. 474036
spark plug carriers when the use of tool der water pumps P/N A-200960-D with Removes and installs spark plug carrier
494289 is impossible. double row bearings. Made up of seal fix on non-CSA head GL series only (use
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore drivers, shaft, bearing installation tools with 3/4” drive).
and holding fixture. 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ●
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ●
● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
VHP
■ ■ ■ ■ ■ ■ ■ ■ ■
CSA Spark Plug Carrier Tool Rocker Arm Spotface Timing Disc Locator
Tool No. 474023 Tool No. 474026 Tool No. 474024
Removes and installs spark plug carrier Machine clearance on existing rocker Locates the CEC timing disc on P9390.
(use with 1/2” drive). arms for new adjusting screw ball sock- 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore et.
● ● ●
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ●
● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Valve Guide Reamer Valve Guide Reamer T-Handle Valve Adjusting Wrench
Tool No. 474046 Tool No. 474012 Tool No. 494287
Carboloy tip will ream several thousand Used with 499953 valve guide reamer. Removes cover bolts and adjusts valves.
guides before replacement. Much harder 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore Offset protects user’s hands.
and longer lasting than tool steel. 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ● ●
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ● ●
● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
VHP
■ ■ ■ ■ ■ ■ ■
● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Valve Spring Compressor - Valve Seat Extractor For Valve Bridge Guide Puller For
4-Valve For Series Four® Series Four® Series Four®
Tool No. 474034 Tool No. 474038 Tool No. 474040
Compresses all four valve springs at once. Extracts intake and exhaust valve seats Removes valve bridge pins from Series
May be used with the cylinder heads on from the VHP Series Four® cylinder. For Four VHP cylinder head. For Series Four
or off the engine. For Series Four only. Series Four only. only.
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ● ● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Bridge Guide Pin Driver Intake Valve Seat Installer Exhaust Valve Seat Driver
Tool No. TL84308 Tool No. TL82981 Tool No. TL82982
This tool allows the valve bridge guide This tool allows for the precision align- This tool allows for the precision align-
pins to be installed properly to the correct ment and installation of chilled Series ment and installation of chilled Series
depth. Four intake valve seats into the cylinder Four exhaust valve seats into the cylin-
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore head. der head.
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ●
● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■
Valve Stem Seal Installer Valve Guide Removal And Instal- Valve Guide Straightness Gauge
Tool No. TL82158 lation Tool Tool No. 474044
This tool is used to align and install the all Tool No. 494257 This tool is used to check new valve
current VHP valve seals. 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore guides for straightness after they have
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore ● ● ● been installed in the cylinder head.
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ●
● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
VHP
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore ● ● ●
● ● ● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Valve Seat Grinding Stone Valve Seat Grinding Stone Valve Seat Grinding Stone
Seat Angle Stone - 30° Seat Angle Stone - 45° Narrowing Stone - 60°
Tool No. 494280 Tool No. 494281 Tool No. 494282
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ● ● ● ● ● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
● ● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
VHP
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore ● ● ●
● ● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
;;
● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
●
9-1/8" Bore
●
9-3/8" Bore
●
VHP Main Bearing
Installation Tool
Tool No. 494366
Tee-Drilled Crankshaft
Brass tool rolls in the main bearings.
8-1/2" Bore
●
9-1/8" Bore
●
9-3/8" Bore
●
;;
Ring Compressor
Tool No. 494085
Sleeve type compressor - taper on inside
diameter compresses rings. Inside diam-
eter is less than sleeve preventing ring
damage during installation.
8-1/2" Bore
●
9-1/8" Bore 9-3/8" Bore
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
;;;;
Ring Compressor
Tool No. 494152
Sleeve type compressor - taper on inside
diameter compresses rings. Inside diam-
eter is less than sleeve preventing ring
damage during installation.
8-1/2" Bore 9-1/8" Bore
●
9-3/8" Bore
Ring Compressor
Tool No. 494206
Sleeve type compressor - taper on inside
diameter compresses rings. Inside diam-
eter is less than sleeve preventing ring
damage during installation.
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
●
VHP Gas Piston Puller
Tool No. 474018
Attaches to the top of VHP gas pistons
and aids in the removal of the piston, pre-
venting damage to the cylinder liner.
8-1/2" Bore
●
9-1/8" Bore 9-3/8" Bore
VHP
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
VHP Gas Piston Puller Cylinder Deglazing Hone Cylinder Deglazing Hone
Tool No. 474019 Tool No. 494234 Tool No. 494235
Attaches to the top of VHP gas pistons 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cylinder Sleeve Remover Kit - Bore Bottom Plate - 8-1/2” Bore Bottom Plate - 9-1/8”
Screw Type Tool No. 494284 Tool No. 494285
Tool No. 499233 Required for use with Tool Number Required for use with Tool Number
Removes the cylinder sleeves from VHP 499233 cylinder sleeve remover. 499233 cylinder sleeve remover.
engines. Must be used with bottom plate 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore 8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
sized for liner.
● ●
8-1/2" Bore 9-1/8" Bore 9-3/8" Bore
● ● ●
GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
VHP
GAS GL DIESEL Inline VEE
■ ■ ■ ■ ■
APG™ TOOLS
Professional quality inch size hand tools are simply unavailable in many parts of
the world.
APG
Many APG customers who intend to do their own service and repair want to have
the necessary tools on location, but don’t desire to invest in more than is neces-
sary.
In response to these needs, Waukesha has developed a kit of specially selected
professional quality tools necessary for the repair and maintenance of APG series
engines.
This kit contains over 150 pieces including a 40ð wide tool chest:
• Tools include:
• Torque wrenches to 600 ft-lb.
• Metric sockets in 3/8ð, 1/2ð and 3/4ð drive
• Ratchets and extensions
• Selected screwdrivers
• Metric wrenches
• Selected punches and chisels
• Selected pipe wrenches
• Selected adjustable wrenches
• Selected pliers
• Selected prybars
• Selected hammers
APG™ TOOLS
Professional quality inch size hand tools are simply unavailable in many parts of
the world.
Many APG customers who intend to do their own service and repair want to have
the necessary tools on location, but don’t desire to invest in more than is neces-
sary.
In response to these needs, Waukesha has developed a kit of specially selected
professional quality tools necessary for the repair and maintenance of APG series
engines.
This kit contains 128 pieces including a 40ð wide tool chest:
• Tools include:
• Torque wrenches to 800 Nm
• Metric sockets in 3/8ð, 1/2ð and 3/4ð drive
• Ratchets and extensions
• Selected screwdrivers
• Metric wrenches
• Selected punches and chisels
• Selected pipe wrenches
• Selected adjustable wrenches
• Selected pliers
• Selected prybars
Piston Extraction Tool Main Bearing Roll-out Tool Turbocharger Water Connection
Tool No. 472083 Tool No. 472087 Wrench
This tool expands into the bowl of the The tool fits into the oil passage in the Tool No. 472082
piston allowing for the removal and crankshaft. The engine is barred over 1-1/2”
installation of the piston and connect- and the bearing removed. This tool is used to remove and install
ing rod assembly. the turbocharger water connections.
APG
Valve Seat Extraction Tool Valve Seat Extraction Tool Hydraulic Pump
Tool No. 472089 Replacement Pins Tool No. 472088
Hardened pins fit under the valve seat Tool No. 472090 Supplies the pressure needed to re-
the tool forcing nut is turned pulling the Replacement pins for 472089, Valve move and install the vibration damper
seat from the head. Seat Extraction Tool. adaptor. Included with the 10,000 psi
hydraulic hand pump are a 6’ hose,
gauge, gauge adapter, and a 1/8” NPT
adapter.
Cylinder Head Lifting Tool Valve Seat Installation Tool Cylinder Sleeve Puller
Tool No. 472091 Tool No. 472092 Tool No. 472094
This tool allows for the safe pulling of This tool is used to align the valve seats This tool is used to remove the cylinder
the cylinder head. when they are installed in the head. liner from the crankcase.
APG
Connecting Rod Guide Pin Spark Plug Sleeve Installer Spark Plug Sleeve Washer Seat
Tool No. 472080 Tool No. 472100 Cleaning Tool
This tool prevents scratching of the cylin- This tool is used to remove and install the Tool No. 472085
der liner when removing or replacing the spark plug sleeve. This tool is not com- This tool is used to clean the spark plug
connceting rod and piston assembly. patible with VGF engine series. sleeve washer seat..
Engine Lifting Bracket Kit Engine Lifting Spreader Bar Damper Lifting Device
Tool No. 476083 Tool No. 476081 Tool No. 476011
The devices connect to the top of the This tool, along with lifting bracket part This device fits around the damper al-
cylinder head studs allowing for the number 325290, is used to spread out lowing for the attachment of the hoist.
connection of the spreader beam part the weight of the engine for correct lift- This tool will only work with the charge
number 476081. This combination is ing. air cooler removed.
used when lifting the engine. This kit
contains four (4) lifting brackets and
sixteen (16) connecting nuts
APG
Connecting Rod Bearing Upper Serration Cushion Lower Serration Cushion
Installation Tool Tool No. 476001 Tool No. 476070
Tool No. 476000 This tool protects the liner from damage This tool protects the crankshaft connect-
This tool correctly positions the connect- when the piston and rod are removed or ing rod journal from damage when the
ing rod bearings in the engine. installed in the cylinder. piston and connecting rod are installed in
the liner.
Connecting Rod Hydraulic Jacks Seal Kit For 476002 Single Connecting
Tool No. 476002 Connecting Rod Jacks Rod Replacement Jack
These two (2) hydraulic jacks are used Tool No. 476004 Tool No. 476002A
to stretch the connecting rod studs dur- This kit contains all the hydraulic seals
ing when removing and installing the con- needed to rebuild one 476002 or 476002A
nection rod. connecting rod jack.
Cylinder Head Jacks Single Cylinder Head/Main Seal Kit For 476003A Cylinder
Tool No. 476003 Bearing Replacement Jack Head Main Bearing Jacks
These four (4) hydraulic jacks are used Tool No. 476003A Tool No. 472995
to stretch the cylinder head studs during In addition to the cylinder head, these This kit contains all the hydraulic seals
when removing and installing the cylinder jacks are used as the primary main bear- needed to rebuild one 476003 or 476003A
head. ing jacks for removal and installation of cylinder head/main bearing jack.
the intermediate main bearings. This
tool will not work on the end main bear-
ings when the oil pan and end caps are
mounted (see 476077)
Single Cylinder Head/Main Anti Polishing Ring Removal Tool Slide Hammer
Bearing Replacement Jack Tool No. 476006 Tool No. 476084
Tool No. 476077 This device fits into slots in the anti-pol- Need Description
These jacks are used to remove and in- ishing ring allowing for the easy removal
stall the outer most main bearing caps of the ring from the liner. Uses 476084
when the free end cover and the oil pan slide hammer.
are mounted to the engine. The entire
jack will need to be rotated when they are
installed on the main bearing studs.
APG
Cylinder Liner Mounting Device Cylinder Liner Lifting Device Cylinder Liner Puller
Tool No. 476020 Tool No. 476025 Tool No. 476073
This tool is used to press the cylinder This device clamps around the upper cyl- This tool pulls up the cylinder liner up
liner squarely into the engine block. inder liner flange to securely hold onto away from the lower sleeve bore in the
the liner when lifting it out of the engine. crankcase. Tool number 476025 is then
used to safely lift the liner away from the
engine.
Connecting Rod And Piston Connecting Rod Installation Tool Piston Ring Compressor
Lifting Device Tool No. 476014 Tool No. 476067
Tool No. 476010 This device pivots on the crankcase door This ring compressor fits into the anti-
This tool fits into the top ring groove and opening pushing on the bottom the con- polishing ring recess in the cylinder liner
allows for the removal of the piston and necting rod lifting the piston on rod as- allowing easy installation of the piston.
connecting rod after they have been sembly upwards in the liner.
pushed up in the bore by tool 476014.
Piston Ring Expander Piston Pin Snap Ring Pliers Wrench For Preheating Resistor
Tool No. 476016 Tool No. 494498 Tool No. 476007
This tool eliminates damage to the piston This plier is sized right for the large piston This tool allows for the easy removal and
rings from over expansion and twisting. pin retaining clip. installation of the coolant preheater ele-
ments.
APG
TDC Checking Gauge Damper Removal Stud Flywheel Pin Extraction Tool
Tool No. 476009 Tool No. 476012 Tool No. 476018
This tool fits into the prechamber hole and The tool is placed into the front of the This tool is used to pull the alignment pins
indicates when the piston has reached crankshaft allowing the damper to slide from the crankshaft before the flywheel is
top dead center. This is useful when ad- off the crankshaft so the lifting device can removed.
justing valves. be used.
Cylinder Head Lifting Device Valve Seat Installation Tool - With- Valve Seat Installation Tool - With
Tool No. 476013 out Guide Guide
This tool mounts to the cylinder head and Tool No. 476026 Tool No. 476027
establishes the correct angle for the safe This tool is used to insert the valve seats This tool inserts the valve seats in the
and easy removal of the head. into the head without the valve guides be- head using the valve guides for align-
ing in place. ment.
Valve Guide Installation Tool Valve Guide Removal Tool Valve Spring Compressor
Tool No. 476028 Tool No. 476029 Tool No. 476030
The tool is used to press the valve guides This tool is used to press out the valve This tool compresses the valve springs
accurately into the head. guides. for the installation and removal of the in-
take and exhaust valves.
Intake Valve Seat Puller Exhaust Valve Seat Puller Filter Before Turbocharger,
Tool No. 476031 Tool No. 476032 Assembly
This tool is used along with a hydraulic This tool is used along with a hydraulic Tool No. 476017
ram to pull the intake valve seats from the ram to pill the exhaust valve seats from This start up tool is only used during the
head. the head. first 2-3 hours of engine operation after
an overhaul to prevent dirt from entering
the turbocharger through the oil lines.
Guide, Camshaft Mounting Device Support, Camshaft Mounting Plate, Camshaft Mounting Device
Tool No. 476037 Device Tool No. 476039
See Tool 476021. Tool No. 476038 See Tool 476021.
See Tool 476021.
Nylon Plate, Camshaft Mounting Head Guide, Camshaft Mounting Center Guide, Camshaft Mounting
Device Device Device
Tool No. 476040 Tool No. 476041 Tool No. 476042
See Tool 476021. See Tool 476021. See Tool 476021.
Stopper, Camshaft Mounting Camshaft Bushing Position Tool Camshaft Bushing Extractor
Device Tool No. 476078 Tool No. 476079
Tool No. 476043 This tool is used to locate the camshaft This tool is used to remove the camshaft
See Tool 476021. bushings precisely in the engine block. bushings from the engine block without
damaging the block.
Spark Plug Wrench Main Bearing Removal And Damper Fluid Testing Kit
Tool No. 476072 Installation Tool Tool No. 476076
This wrench is sized to properly remove Tool No. 476074 This kit is used to take fluid samples from
and install the spark plugs in the 220 en- This tool turns the main bearing shells in the 12V220GL engines vibration damp-
gine. and out of the engine. ener. Includes sample container, instruc-
tions and engine information tag.
APG
VGF® TOOLS
The VGF series engine tools will vary
between inline and vee types as well
as by fuel usage.
Lower Spark Plug Tube Socket Damper Flange Socket Camshaft Pilot
Tool No. 472017 Tool No. 472023 Tool No. 472024
Special thin wall, 3/4” drive, 41 mm Hardened, long, hex head (10mm), 3/8” Pilot threads onto rear end of camshaft
socket for lower spark plug tube (P/N drive socket wrench for vibration damper for camshaft installaion and removal.
305003D, in head) with hex (tube previ- driving flange. Extends rear cam journal spanning two
ously used only in cylinder head series bearings in the block to provide full sup-
P/N AA300102D, AD300102D). port for rear end of the cam.
Recommended for older VGF engines.
Reference Service Bulletin 7-2551C (or
latest revision).
Guide Pin Kit Valve Guide Pilot Valve Seat Grinding Wheels
Tool No. 472030 Tool No. 472035 Tool No. 472044
Includes disassembly and assembly Intake/exhaust valve guide pilot for use A 20° stone for use with P/N 494277
guide pins for: with valve grinder P/N 494277 grinder and pilot P/N 472035, to cut 20°
intake and exhaust inserts.
Vibration Damper (2)
Flywheel Housing (4)
Flywheel (4)
VGF Crankshaft Seal Driver Camshaft Pilot Tool Main Bearing Roll Out Tool
Tool No. 472048 Tool No. 472055 Tool No. 472057
Hard plastic seal driver with a steel han- Guides the camshaft through the bush- “T” shaped brass tool locates in crank-
dle shaped to install the front and rear ings in crankcase. shaft oil hole to roll upper bearing shell
VGF crankshaft seals. out of crankcase for inspection and/or
replacement.
CEC Test Cable (P48 Engines) Spark Plug Carrier Holder Damper Flange Socket
Tool No. 472062 Tool No. 472065 Tool No. 472066
A necessary tool to test CEC ignition This tool prevents spark plug carriers 14 mm hex drive socket (1/2” drive) to as-
modules. This cable exposes the “G” from loosening due to the break-away semble vibration damper driving flange to
lead for connection to an oscilloscope torque when removing spark plugs. crankshaft.
for troubleshooting. For sixteen cylinder Refer to Service Bulletin 15-2650A (or lat-
(P48 engines). est revision).
Water Pump Jam Nut Socket Spark Plug Tube Removal Tool Flexible Cylinder Hone
Tool No. 472067 Tool No. 472068 Tool No. 494245
Spanner wrench to torque the center jam Combination tool, 3/4” drive, to remove For breaking the glaze when re-ringing
nut on inline VGF jacket water pumps both the current (P/N 305002E) and pre- an engine on which the cylinders are not
(P/N E301060B, D301060B) vious (P/N 305002D) upper spark plug worn.
tubes, and also current (P/N 305003J)
and previous (P/N 305003F) lower spark
plug tubes.
Piston Ring Expander Piston Ring Compressor VEE DSM Sensor Tool
Tool No. 472075 Tool No. 472076 Tool No. 472070
Eliminates damage caused to piston Clamp style piston ring compressor. This tool kit includes special tools to drill
rings by twisting and over-expanding. and tap previous production (prior to April
Proper piston ring installation is critical to 1997) VGF VEE crankcases to accept
achieve long bottom and overhaul life. DSM sensors.
Reference Service Bulletin 15-2808 (or For specific procedures, refer to Form
latest revision). 6278, Custom Engine Control Detona-
tion Sensing Module Installation, Opera-
tion and Maintance Manual, First Edition.
INTERMEDIATE SERIES
TOOLS
The tools in this section are specific
to the following engine models:
H2476G
F1905G
F817G
L3712G
F1197G
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■
Flexible Cylinder Hone Teflon Packing Ring Installation Teflon Packing Ring Installation
Tool No. 494240 Tools Tools
Approved for “breaking the glaze” when Tool No. 494260-C Tool No. 494260-D
re-ringing an engine where cylinders are One tool replaces both the pusher and One tool replaces both the pusher and
not worn. the resizer. the resizer.
The use of this tool makes installing the The use of this tool makes installing the
packing rings easier, faster and reduces packing rings easier, faster and reduces
the chance of damage. the chance of damage.
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■
Teflon Packing Ring Installation Teflon Packing Ring Installation Valve Guide Pilot
Tools Tools Tool No. 494300
Tool No. 494260-H Tool No. 494260-F .5” diameter
One tool replaces both the pusher and One tool replaces both the pusher and For use with Tool No. 494277 valve seat
the resizer. the resizer. grinder and Tool No. 494278 dial gauge.
The use of this tool makes installing the The use of this tool makes installing the
packing rings easier, faster and reduces packing rings easier, faster and reduces
the chance of damage. the chance of damage.
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■ ■
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■ ■
Valve Guide Reamer Cylinder Head Nut Wrench Expandable Piston Ring
Tool No. 494339 Tool No. 499723 Compressor
Allows mechanics to torque heads with- Tool No. 499967
out removing water manifold. 3-1/8” to 7” range.
Intermediate
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■ ■ ■ ■
Expandable Piston Ring Valve Seat Grinding Stone Valve Seat Grinding Stone
Compressor Tool No. 494302 Tool No. 494303
Tool No. 494375 Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo
6” to 9” range. Grinder, P/N 494277. Grinder, P/N 494277.
Angle: 15° int. Angle: 45°
Diameter: 2.75” Diameter: 2.75”
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■ ■ ■ ■ ■
Valve Seat Grinding Stone Valve Seat Grinding Stone Valve Seat Grinding Stone
Tool No. 494304 Tool No. 494305 Tool No. 494306
Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo
Grinder, P/N 494277. Grinder, P/N 494277. Grinder, P/N 494277.
Angle: 60° int. Angle: 30° int. Angle: 15° exh.
Diameter: 2.75” Diameter: 2.75” Diameter: 2.125”
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■ ■ ■ ■ ■
Valve Seat Grinding Stone Valve Seat Grinding Stone Valve Seat Grinding Stone
Tool No. 494307 Tool No. 494308 Tool No. 494309
Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo
Grinder, P/N 494277. Grinder, P/N 494277. Grinder, P/N 494277.
Angle: 45° exh. Angle: 60° exh. Angle: 15° exh.
Diameter: 2.125” Diameter: 2.125” Diameter: 2.375”
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■
Valve Seat Grinding Stone Valve Seat Grinding Stone Valve Seat Grinding Stone
Tool No. 494310 Tool No. 494311 Tool No. 494312
Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo
Grinder, P/N 494277. Grinder, P/N 494277. Grinder, P/N 494277.
Angle: 45° exh. Angle: 60° exh. Angle: 15° int.
Diameter: 2.375” Diameter: 2.375” Diameter: 3.375”
Intermediate
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■
Valve Seat Grinding Stone Valve Seat Grinding Stone Valve Seat Grinding Stone
Tool No. 494313 Tool No. 494314 Tool No. 494315
Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo Designed to be used with the Hall Toledo
Grinder, P/N 494277. Grinder, P/N 494277. Grinder, P/N 494277.
Angle: 30° int. Angle: 60° int. Angle: 15° exh.
Diameter: 3.375” Diameter: 3.375” Diameter: 3.125”
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■ ■
F817G F1197G F1905G H2476G L3712G F817G F1197G F1905G H2476G L3712G
■ ■
Appendix B
292630...................................................................... 36 472102...................................................................... 33
292779...................................................................... 36 472103...................................................................... 68
296492...................................................................... 47 472990 (AT25GL)...................................................... 23
472001...................................................................... 82 472994...................................................................... 32
472002...................................................................... 82 472995...................................................................... 21
472004...................................................................... 82 472996...................................................................... 24
472007...................................................................... 82 473001 (AT27GL)...................................................... 43
472008...................................................................... 82 473002...................................................................... 42
472009...................................................................... 83 473005...................................................................... 40
472010...................................................................... 83 473006...................................................................... 44
472011....................................................................... 83 473010...................................................................... 43
472012...................................................................... 83 473011....................................................................... 41
472015...................................................................... 83 473012...................................................................... 44
472017...................................................................... 84 473014...................................................................... 44
472023...................................................................... 84 473015...................................................................... 44
472024...................................................................... 84 473016 (AT27GL)...................................................... 44
472030...................................................................... 84 473017 (AT27GL)...................................................... 44
472035...................................................................... 84 473018...................................................................... 45
472044...................................................................... 84 473019...................................................................... 42
472048...................................................................... 85 473020...................................................................... 37
472055...................................................................... 85 473022...................................................................... 43
472057...................................................................... 85 473023...................................................................... 43
472059...................................................................... 85 473024...................................................................... 43
472060...................................................................... 85 473025...................................................................... 37
472061...................................................................... 85 473026...................................................................... 37
472062...................................................................... 86 473027...................................................................... 37
472065...................................................................... 86 473028...................................................................... 37
472066...................................................................... 86 473029...................................................................... 38
472067...................................................................... 86 473030...................................................................... 38
472068...................................................................... 86 473031...................................................................... 38
472070...................................................................... 87 473032...................................................................... 38
472074...................................................................... 87 473033...................................................................... 46
472075...................................................................... 87 473034...................................................................... 46
472076...................................................................... 87 473035...................................................................... 43
472077...................................................................... 82 473036...................................................................... 37
472078...................................................................... 81 473044...................................................................... 46
472080...................................................................... 67 474000...................................................................... 46
472081...................................................................... 67 474001...................................................................... 46
472082...................................................................... 65 474003...................................................................... 36
472083...................................................................... 65 474005...................................................................... 35
472085...................................................................... 67 474007...................................................................... 21
472087...................................................................... 65 474008...................................................................... 50
472088...................................................................... 65 474012................................................................ 50, 89
472089...................................................................... 65 474013...................................................................... 50
472090...................................................................... 65 474016...................................................................... 50
472091...................................................................... 66 474018...................................................................... 53
472092...................................................................... 66 474019...................................................................... 51
472093...................................................................... 66 474021...................................................................... 52
472094................................................................ 66, 83 474023...................................................................... 51
472095...................................................................... 67 474024...................................................................... 25
472096...................................................................... 66 474025...................................................................... 59
472099...................................................................... 66 474026...................................................................... 59
FORM 398 Fifth Edition 99
APPENDIX B - PART NUMBER INDEX SPECIAL TOOLS CATALOG
Appendix B
489943...................................................................... 30 494300...................................................................... 90
490049...................................................................... 30 494301...................................................................... 91
494014...................................................................... 22 494302...................................................................... 92
494022...................................................................... 23 494303...................................................................... 92
494023...................................................................... 28 494304...................................................................... 92
494085...................................................................... 28 494305................................................................ 61, 92
494087...................................................................... 53 494306...................................................................... 92
494088...................................................................... 55 494307...................................................................... 93
494152...................................................................... 28 494308...................................................................... 93
494203...................................................................... 89 494309...................................................................... 93
494206...................................................................... 28 494310...................................................................... 93
494209...................................................................... 58 494311....................................................................... 93
494214...................................................................... 29 494312...................................................................... 93
494215...................................................................... 29 494313...................................................................... 94
494216...................................................................... 59 494314...................................................................... 94
494217...................................................................... 59 494315................................................................ 52, 94
494227...................................................................... 57 494316...................................................................... 94
494234...................................................................... 57 494317................................................................ 25, 94
494235...................................................................... 29 494322...................................................................... 91
494236...................................................................... 29 494331...................................................................... 53
494237...................................................................... 89 494338...................................................................... 45
494238...................................................................... 89 494339...................................................................... 91
494239...................................................................... 89 494344................................................................ 55, 91
494240...................................................................... 90 494345...................................................................... 45
494245...................................................................... 29 494346...................................................................... 32
494257...................................................................... 30 494357...................................................................... 52
494258...................................................................... 59 494360...................................................................... 21
494260-C................................................................... 90 494363...................................................................... 56
494260-D................................................................... 90 494363B.................................................................... 21
494260-F................................................................... 90 494363C.................................................................... 45
494260-H................................................................... 90 494364...................................................................... 45
494261...................................................................... 59 494365...................................................................... 45
494262...................................................................... 60 494366...................................................................... 57
494263...................................................................... 30 494375...................................................................... 92
494264...................................................................... 55 494385...................................................................... 58
494266...................................................................... 31 494420...................................................................... 58
494267...................................................................... 49 494421 (.010 - .013 GL)............................................ 58
494268...................................................................... 31 494422...................................................................... 58
494272...................................................................... 31 494448...................................................................... 58
494273...................................................................... 31 494487...................................................................... 53
494276...................................................................... 57 494497...................................................................... 46
494277...................................................................... 56 494498...................................................................... 37
494278...................................................................... 56 494538 (AT25GL)...................................................... 55
494280...................................................................... 31 494729...................................................................... 60
494281...................................................................... 32 495229...................................................................... 79
494282...................................................................... 28 499723...................................................................... 91
494283...................................................................... 25 499967...................................................................... 91
494284...................................................................... 25 A292511.................................................................... 36
494285...................................................................... 56 A292514.................................................................... 42
494286...................................................................... 56 A292539.................................................................... 36
494287...................................................................... 56 A292587.................................................................... 39
494288...................................................................... 24 A292591.................................................................... 39
FORM 398 Fifth Edition 101
APPENDIX B - PART NUMBER INDEX SPECIAL TOOLS CATALOG