You are on page 1of 3

Marking scheme

TASK 1 (4.2 pts total)


TASK 1.1.1 (0.1 pts total)
Correct form: 0.1 pts
• otherwise: 0 pt.

TASK 1.1.2 (1.5 pts total)


Correct labeling and units: 0.1 pts
At least 12 reasonable measurements of V , R1 and R2 : 0.6 pts
• for less measurements proportionally less points
Correct calculations of T1 , T2 and ΔT (or ΔR and ΔT ): 0.6 pts
• for less measurements or wrong calculation proportionally less points
Error estimation for measured and calculated values: 0.2 pts

TASK 1.1.3 (1.4 pts total)


Correct labeling and units: 0.1 pts
Correct size of the graph (at least 75% of the paper): 0.1 pts
Correct scales: 0.1 pts
Correct plotting of the measured points: 0.4 pts
Correct line fitting, reading the slope and its error: 0.3 pts
• missing error: - 0.1 pts
Correct numerical value for the Seebeck-coefficient: 0.2 pts
• out of range: 0 pt
Correct unit for the Seebeck-coefficient: 0.1 pts
Error estimation for the Seebeck-coefficient: 0.1 pts

TASK 1.2.1 (0.1 pts total)


Correct numerical value with error, correct unit: 0.1 pts
• missing unit: - 0.05 pts
• missing error: - 0.02 pts

TASK 1.2.2 (0.1 pts total)


Correct numerical value with error, correct unit: 0.1 pts
• missing unit: - 0.05 pts
• missing error: - 0.02 pts

TASK 1.2.3 (0.1 pts total)


Correct diagram: 0.1 pts
• otherwise: 0 pt.

TASK 1.2.4 (0.1 pts total)


Correct numerical value with error, correct unit: 0.1 pts
• missing unit: - 0.05 pts
• missing error: - 0.02 pts

TASK 1.2.5 (0.3 pts total)


Correct form: 0.2 pts
• otherwise: 0 pt.
Correct numerical value with error, correct unit: 0.1 pts
• missing unit: - 0.05 pts
• missing error: - 0.02 pts
Marking scheme

TASK 1.3.1 (0.1 pts total)


Correct numerical values with error, correct unit: 2×0.05 pts
• missing unit: - 0.02 pts each
• missing error: - 0.01 pts each

TASK 1.3.2 (0.1 pts total)


Correct form: 0.05 pts
• otherwise: 0 pt.
Correct numerical value with error, correct unit: 0.05 pts
• missing unit: - 0.02 pts
• missing error: - 0.01 pts

TASK 1.3.3 (0.1 pts total)


Correct form: 0.05 pts
• otherwise: 0 pt.
Correct numerical value, correct unit: 0.05 pts
• missing unit: - 0.02 pts

TASK 1.3.4 (0.2 pts total)


Correct form: 0.1 pts
• otherwise: 0 pt.
Correct numerical value with error: 0.1 pts
• missing error: - 0.05 pts

TASK 2 (5.5 pts total)


TASK 2.1.1 (0.1 pts total)
Correct diagram: 0.1 pts
• otherwise: 0 pt.

TASK 2.1.2 (1.0 pts total)


Correct labeling and units: 0.1 pts
At least 10 reasonable measurements of t , R1 and R2 : 0.4 pts
• for less measurements proportionally less points
Correct calculations of T1 , T2 and ΔT (or ΔR and ΔT ): 0.4 pts
• for less measurements or wrong calculation proportionally less points
Error estimation for measured and calculated values: 0.1 pts

TASK 2.2.1 (0.1 pts total)


Correct form: 0.04 pts
• otherwise: 0 pt.
Correct numerical values with error, correct unit: 3×0.02 pts
• missing unit: - 0.01 pts each

TASK 2.2.2 (1.8 pts total)


Correct labeling and units: 0.1 pts
At least 8 reasonable measurements of t , R1 and R2 for each PH : 3×0.3 pts
• for less measurements proportionally less points
Correct calculations of T1 , T2 and ΔT (or ΔR and ΔT ): 3×0.24 pts
• for less measurements or wrong calculation proportionally less points
Error estimation for measured and calculated values: 0.08 pts

2
Marking scheme

TASK 2.2.3 (1.2 pts total)


Correct labeling and units: 0.1 pts
Correct size of the graph (at least 75% of the paper): 0.1 pts
Correct scales: 0.1 pts
Correct plotting of the measured points: 0.3 pts
Correct lines drawn on the points: 0.2 pts
• Zigzag connecting is 0 pt.
Correct reading of the equilibrium temperature differences: 4×0.1 pts
• missing unit: - 0.05 pts each
• missing error: - 0.02 pts each

TASK 2.3.1 (0.8 pts total)


Correct labeling and units: 0.1 pts
Correct size of the graph (at least 75% of the paper): 0.05 pts
Correct scales: 0.05 pts
Correct plotting of the measured points: 0.2 pts
Correct line fitting: 0.2 pts
• missing error: - 0.05 pts
Correct reading of the heating power at zero equilibrium temperature: 0.2 pts
• missing unit: - 0.05 pts
• missing error: - 0.05 pts

TASK 2.3.2 (0.2 pts total)


Correct form: 0.1 pts
• otherwise: 0 pt.
Correct numerical value with error: 0.1 pts
• missing error: - 0.05 pts

TASK 2.3.3 (0.1 pts total)


Correct form: 0.05 pts
• otherwise: 0 pt.
Correct numerical value with error, correct unit: 0.05 pts
• missing unit: - 0.02 pts
• missing error: - 0.01 pts

TASK 2.3.4 (0.2 pts total)


Correct form: 0.1 pts
• otherwise: 0 pt.
Correct numerical value with error, correct unit: 0.1 pts
• missing unit: - 0.05 pts
• missing error: - 0.02 pts

TASK 3 (0.3 pts total)


TASK 3.1 (0.3 pts total)
Correct form: 0.1 pts
• otherwise: 0 pt.
Correct numerical value with error, correct unit: 0.2 pts
• missing unit: - 0.05 pts
• missing error: - 0.05 pts

You might also like