Professional Documents
Culture Documents
MOTOR GRADERS
CONTENTS
Features .................................................................... 5A-2
Specifications ........................................................... 5A-4
Dimensions ............................................................... 5A-6
Attachment Availability ............................................ 5A-8
Scarifier Specifications ........................................... 5A-9
Front Dozer Blade Specifications ......................... 5A-12
Rear Mounted Ripper Specifications ................... 5A-13
Upper Attachments ................................................ 5A-14
Tire Availability and TMPH .................................... 5A-15
Attachments and Options ..................................... 5A-16
5A-1
Features MOTOR GRADERS
FVBH0015
5A-2
Features MOTOR GRADERS
Max. uptime
• Non-spin differential
Non-spin differential with automatic locking and
unlocking can be installed as an option on the
final drives, assuring the optimum in smooth
steering.
5A-3
Specifications MOTOR GRADERS
Model
Item GD511A-1 GD555-3A GD555-3C*6 GD611A-1
OPERATING WEIGHT* kg (lb) 10800 (23,810) 13100 (28,880) 14040 (30,950) 12500 (27,555)
HORSEPOWER:
SAE kW (HP)/rpm 101 (135)/2900 119 (160)/2000 119 (160)/2000 116 (155)/2500
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.4 (2.1) 3.3 (2.1) 3.3 (2.1) 3.5 (2.2)
2nd 6.1 (3.8) 4.8 (3.0) 4.8 (3.0) 6.3 (3.9)
3rd 10.7 (6.6) 6.8 (4.2) 6.8 (4.2) 10.8 (6.7)
4th 14.1 (8.8) 9.8 (6.1) 9.8 (6.1) 14.8 (9.2)
5th 25.5 (15.8) 14.9 (9.3) 14.9 (9.3) 26.2 (16.3)
6th 44.5 (27.7) 21.6 (13.4) 21.6 (13.4) 44.6 (27.7)
7th — 29.6 (18.4) 29.6 (18.4) —
8th — 42.9 (26.7) 42.9 (26.4) —
Reverse (Max.) 54.4 (33.8) 39.1 (24.3) 39.1 (24.3) 54.4(33.8)
Max. traction (Drawbar pull) kg (lb) 6140 (13,535) 7490 (16,510) 8030 (17,700) 7100 (15,650)
Min. turning radius** mm (ft.in) 6600 (21'8") 6800 (22'4") 6800 (22'4") 6900 (22'8")
DIMENSIONS:
Treads: Front mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Rear mm (ft.in) 2020 (6'8") 2130 (7'0") 2130 (7'0") 2020 (6'8")
Articulation angle (each) degree 27 23 23 26
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
S6D95L SAA6D102E SAA6D102E S6D105
No. of cylinders- mm (in) 6-95 × 115 6 –102 × 120 6 –102 × 120 6 –105 × 120
bore × stroke (3.74 × 4.53) (4.02 × 4.72) (4.02 × 4.72) (4.13 × 4.92)
Piston displacement ltr. (in3) 4.89 (298) 5.88 (359) 5.88 (359) 6.49 (396)
CAPACITY
Fuel tank ltr. (U.S. Gal) 227 (60.0) 340 (90) 340 (90) 285 (75.3)
Model
GD655-3A GD655-3C*6 GD661A-1 GD675-3A
Item
OPERATING WEIGHT* kg (lb) 14070 (31,020) 15000 (33,070) 13300 (29,320) 14870 (32,780)
HORSEPOWER:
SAE kW(HP)/rpm 142 (190)/1990 142 (190)/1900 134 (180)/2500 149 (200)/1900
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.3 (2.1) 3.3 (2.1) 3.5 (2.2) 3.3 (2.1)
2nd 4.7 (2.9) 4.7 (2.9) 6.3 (3.9) 4.7 (2.9)
3rd 6.7 (4.2) 6.7 (4.2) 10.8 (6.7) 6.7 (4.2)
4th 9.7 (6.0) 9.7 (6.0) 14.8 (9.2) 9.7 (6.0)
5th 14.6 (9.1) 14.6 (9.1) 26.2 (16.3) 14.6 (9.1)
6th 21.2 (13.2) 21.2 (13.2) 44.6 (27.7) 21.2 (13.2)
7th 29.1 (18.1) 29.1 (18.1) 29.1 (18.1)
8th 42.2 (26.2) 42.2 (26.2) 42.2 (26.2)
Reverse (Max.) 38.4 (23.9) 38.4 (23.9) 54.4 (33.8) 38.3 (23.8)
Max. traction (Drawbar pull) kg (lb) 8050 (17,750) 8580 (18,920) 7400 (16,315) 8510 (18,760)
Min. turning radius** mm (ft.in) 6900 (22'8") 6900 (22'8") 6900 (22'8") 6900 (22'8")
DIMENSIONS:
Treads: Front mm (ft.in) 2130 (7'0") 2130 (7'0") 2020 (6'8") 2130 (7'0")
Rear mm (ft.in) 2130 (7'0") 2130 (7'0") 2020 (6'8") 2130 (7'0")
Articulation angle(each) degree 23 23 26 23
ENGINE:
Model KOMATSU KOMATSU KOMATSU KOMATSU
SAA6D114E SAA6D114E S6D105 SAA6D114E
No. of cylinders- mm (in) 6 –114 × 135 6 –114 × 135 6 –105 × 125 6 –114 × 135
bore × stroke (4.49 × 5.32) (4.49 × 5.32) (4.13 × 4.92) (4.49 × 5.31)
Piston displacement ltr. (in3) 8.27 (505) 8.27 (505) 6.49 (396) 8.27 (505)
CAPACITY
Fuel tank ltr. (U.S. Gal) 340 (90) 340 (90) 285 (75.3) 340 (90)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*6 USA version
5A-4
Specifications MOTOR GRADERS
Model
Item GD675-3C*6 GD705A-4 GD825A-2
OPERATING WEIGHT* kg (lb) 15810 (34,850) 17620 (38,580) 26350 (58,090)
HORSEPOWER:
SAE kW(HP)/rpm 149 (200)/1900 149 (200)/2000 209 (280)/2100
PERFORMANCE:
Travel speeds: km/h (MPH)
Forward 1st 3.3 (2.1) 3.9 (2.4) 4.0 (2.5)
2nd 4.7 (2.9) 5.2 (3.2) 5.4 (3.4)
3rd 6.7 (4.2) 7.6 (4.7) 8.0 (5.0)
4th 9.7 (6.0) 11.5 (7.1) 11.5 (7.1)
5th 14.6 (9.1) 15.0 (6.8) 15.8 (9.8)
6th 21.2 (13.2) 20.5 (12.7) 21.4 (13.3)
7th 29.1 (18.1) 30.0 (18.6) 31.3 (19.4)
8th 42.2 (26.2) 43.0 (26.7) 44.9 (27.9)
Reverse (Max.) 38.3 (23.8) 45.9 (28.5) 47.9 (29.8)
Max .traction (Drawbar pull) Kg (lb) 9050 (19,950) 10180 (22,420) 14705 (32,420)
Min. turning radius** mm (ft.in) 6900 (22'8") 7500 (24'7") 7900 (25'11")*5
DIMENSIONS:
Treads: Front mm (ft.in) 2130 (7'0") 2300 (7'7") 2620 (8'7")
Rear mm (ft.in) 2130 (7'0") 2300 (7'7") 2620 (8'7")
Articulation angle (each) degree 23 26 25
ENGINE:
Model KOMATSU KOMATSU KOMATSU
SAA6D114E S6D125 S6D140E
No. of cylinders- mm (in) 6 –114 × 135 6 –125 × 150 6-140 × 165
bore × stroke (4.49 × 5.31) (4.9 × 5.9) (5.51 × 6.50)
Piston displacement ltr. (in3) 8.27 (505) 11.05 (674) 15.24 (930)
CAPACITY
Fuel tank ltr. (U.S. Gal) 340 (90) 400 (105.7) 500 (132.1)
* Operating weight includes standard blade, standard tires, full fuel tank, lubricants, operator and standard equipment.
** At center of front outside tire, combining the use of full articulation, full front wheel steering and leaning.
*5 With differential
*6 USA version
5A-5
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
5A-6
Dimensions MOTOR GRADERS
E F
A
G.L
B D
C
See Specifications
Model GD825A-2
Item
BLADE: Length mm (ft.in) 4878 (16')
Height* mm (ft.in) 850 (2'9")
TIRES 23.5-25-12PR
DIMENSIONS:
A Height to top of the mm (ft.in) 3300 (10'10")
blade lift cylinders
B Distance between mm (ft.in) 3100 (10'2")
center of front tires and
blade edge
C Wheelbase mm (ft.in) 7100 (23'4")
D Distance between mm (ft.in) 1840 (6')
centers of tandem
wheels
E Height to top of the mm (ft.in) 3490 (11'5")
stack
F Overall height: mm (ft.in)
When installing the
-CANVAS CANOPY
-ROPS CANOPY —
-ROPS CAB (Low) 3550 (11'8")
-ROPS CAB (Hight) 3550 (11'8")
-STEEL CAB —
Articulation angle degree 25
Width over tires: mm (ft.in)
Front 3310 (11'10")
Rear 3310 (11'10")
Ground clearance mm (ft.in) 440 (1'5")
5A-7
Attachment Availability MOTOR GRADERS
:Standard equipment
:Optional equipment
Model GD GD GD GD GD GD GD GD GD
Item 511A-1 555-3A 611A-1 655-3A 661A-1 675-3A 705A-4 825A-2 555-3C*
BLADE
2.2 m (7.2 ft)
2.5 m (8.2 ft)
2.8 m (9.2 ft)
3.05 m (10 ft)
3.1 m (10.2 ft)
3.4 m (11.2 ft)
3.7 m (12.1 ft)
4.0 m (13.1 ft)
4.3 m (14.1 ft)
4.9 m (16.1 ft)
VARIABLE BLADE
HYDRAULIC BLADE TIP
CONTROL
EXTENSION BLADE
FRONT DOZER BLADE
SCARIFIER
5 teeth
6 teeth
7 teeth
9 teeth
11 teeth
REPLACEBLE TIP
TEETH FOR SCARIFIER
REAR MOUNT RIPPER
PUSH PLATE
Model GD GD
Item 655-3C* 675-3C*
BLADE
2.2 m (7.2 ft)
2.5 m (8.2 ft)
2.8 m (9.2 ft)
3.05 m (10 ft)
3.1 m (10.2 ft)
3.4 m (11.2 ft)
3.7 m (12.1 ft)
4.0 m (13.1 ft)
4.3 m (14.1 ft)
4.9 m (16.1 ft)
VARIABLE BLADE
HYDRAULIC BLADE TIP
CONTROL
EXTENSION BLADE
FRONT DOZER BLADE
SCARIFIER
5 teeth
6 teeth
7 teeth
9 teeth
11 teeth
REPLACEBLE TIP
TEETH FOR SCARIFIER
REAR MOUNT RIPPER
PUSH PLATE
* USA version
5A-8
Scarifier Specifications MOTOR GRADERS
Model
500 SERIES *3
Item
NO. OF TEETH 9
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +660 (+1,460) +665 (+1,470)
[+685 (+1,510)] [+690 (+1,520)]
To front axle +565 (+1,250) +570 (+1,260)
[+585 (+1,290)] [+590 (+1,300)]
To rear axle +95 (+210) +95 (+210)
[+100 (+220)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 4440 (9,790) 4335 (9,560)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 51 ~ 64
Max. lift above ground mm (ft.in) 340 (1'1") [530 (1'9")] 320 (1'1") [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") [290 (11.4")] 260 (10.2") [290 (11.4")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 660 (1,460) 665 (1,470)
B: Digging width mm (ft.in) 1065 (3'6") 1090 (3'7")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8 × 3.0 × 1.0) (7.3 × 2.0 × 1 .4)
APPLICABLE MODEL GD510R*3 GD510R*3
GD511A*3 GD511A*3
Model
500 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: kg (lb) Standard Teeth Point Teeth
To operating weight +690 (+1,520) +565 (+1,250) +695 (+1,530) +570 (+1,260)
[+715 (+1,580)] [+575 (+1,270)] [+720 (+1,590)] [+585 (+1,290)]
To front axle +590 (+1,300) +470 (+1,040) +595 (+1,310) +475 (+1,050)
[+610 (+1,340)] [+475 (+1,050)] [+615 (+1,360)] [+485 (+1,070)]
To rear axle +100 (+220) +95 (+210) +100 (+220) +95 (+210)
[+105 (+230)] [+100 (+220)] [+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 1005 (3'4") 850 (2'9") 960 (3'2")
and center of front tire
SCARIFIER LOAD* kg (lb) 4470 (9,850) 5335 (11,760) 4265 (9,400) 5295 (11,670)
SCARIFIER RANGE:
Digging angle degree 61 ~ 74 63 ~ 78 51 ~ 64 53 ~ 69
Max. lift above ground mm (ft.in) 340 (1'1") 350 (1'2") 320 (1'1") 320 (1'1")
[530 (1'9")] [495 (1'7")]
Max. digging depth mm (ft.in) 260 (10.2") 255 (10") 260 (10.2") 265 (10.4")
[290 (11.4")] [365 (1'2")] [290 (11.4")] [365 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 690 (1,520) 565 (1,250) 695 (1,530) 570 (1,260)
B: Digging width mm (ft.in) 1325 (4'4") 1405 (4'7") 1350 (4'5") 1430 (4'8")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
GD510R*3 GD555-3 GD510R*3 GD555-3
GD511A*3 GD511A*3
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod
5A-9
Scarifier Specifications MOTOR GRADERS
Model
600 SERIES
Item
NO.OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight +710 (+1,570) [+720 (+1,590)] +715 (+1,580) [+725 (+1,600)]
kg (lb)
To front axle +615 (+1,360) [+620 (+1,370)] +615 (+1,360) [+625 (+1,380)]
To rear axle +95 (+210) [+100 (+220)] +100 (+220) [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 970 (3'2") 850 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 5055 ~ 5125 (11,140 ~ 11,300) 4753 ~ 5435 (10,480 ~ 11,980)
SCARIFIER RANGE:
Digging angle degree 63 ~ 76 53 ~ 66
Max. lift above ground mm (ft.in) 320 (1'1") 300 (1')
Max. digging depth mm (ft.in) 270 (10.6") 270 (10.6")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 710 (1,570) 715 (1,580)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed mm (in) 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
APPLICABLE MODEL GD611A*3 GD611A*3
GD661A*3 GD661A*3
Model
600 SERIES
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight +640 (+1,410) +645 (+1,420)
[+650 (+1,430)] [+655 (+1,440)]
To front axle kg (lb) +535 (1,180) +545 (1,200)
[+545 (+1,200)] [+555 (+1,220)]
To rear axle +105 (+230) +100 (+220)
[+105 (+230)] [+100 (+220)]
DIMENSIONS:
A: Distance between teeth mm (ft.in) 980 (3'3") 935 (3'1")
and center of front tire
SCARIFIER LOAD* kg (lb) 5670 (12,500) 5635 (12,420)
SCARIFIER RANGE:
Digging angle degree 62 ~ 77 52 ~ 68
Max. lift above ground mm (ft.in) 370 (1'3") 340 (1'1")
Max. digging depth mm (ft.in) 245 (9.6") [345 (1'2")] 250 (9.8") [345 (1'2")]
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 640 (1,410) 645 (1,420)
B: Digging width mm (ft.in) 1405 (4'7") 1430 (4'8")
Tooth:
As-installed 275 × 77 × 25 185 × 50 × 36.3
Height × width × thickness mm (in) (10.8" × 3.0" × 1.0") (7.3" × 2.0" × 1.4")
APPLICABLE MODEL GD655-3A, GD675-3A GD655-3A, GD675-3A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
*3: Including the scarifier bracket weight.
[ ] : When installing the adjustable type lifting rod.
5A-10
Scarifier Specifications MOTOR GRADERS
Model GD705A-4
Item
NO. OF TEETH 11
ADDITIONAL WEIGHT: Standard Teeth Point Teeth
To operating weight kg (lb) +1040 (+2,290) +1050 (+2,310)
To front axle +880 (+1,940) +890 (+1,960)
To rear axle +160 (+350) +160 (+350)
DIMENSIONS:
A: Distance between teeth mm (ft.in) 890 (2'11') 830 (2'9")
and center of front tire
SCARIFIER LOAD* kg (lb) 6690 (14,750) 6630 (14,620)
SCARIFIER RANGE:
Digging angle degree 54~67.5 49~63
Max. lift above ground mm (ft.in) 630 (2'1") 610 (2')
Max. digging depth mm (ft.in) 350 (1'2") 350 (1'2")
SCARIFIER EQUIPMENT:
Type V-type, 2-stage adjustable V-type, 2-stage adjustable
Weight kg (lb) 1040 (2,290) 1050 (2,310)
B: Digging width mm (ft.in) 1325 (4'4") 1350 (4'5")
Tooth:
As-installed 265 × 77 × 25 185 × 50 × 36.3
Height × width × thickness mm (in) (10.4 × 3.0 × 1.0) (7.3 × 2.0 × 1.4)
APPLICABLE MODEL GD705A GD705A
*: SCARIFIER LOAD: When the scarifier and rear tires support the machine's weight.
[ ] : When installing the adjustable type lifting rod.
5A-11
Front Dozer Blade MOTOR GRADERS
Specifications
Model GD705A-4
Item
ADDITIONAL WEIGHT:
To operating weight kg (lb) +970 (+2,140)
To front axle +1100 (+2,450)
To rear axle (140 (–310)
ADDITIONAL OVERALL
LENGTH:
A: Distance between blade mm (ft.in) 1610 (5'3")
edge and center of front
tire
BLADE RANGE:
Digging angle degree 55
Max. lift above ground mm (ft.in) 555 (1'10")
Max. drop below ground mm (ft.in) 110 (4.3")
BLADE EQUIPMENT:
Type Front arc, box section type
hydraulically controlled
Weight kg (lb) 910 (2,010)
Length × height mm (ft.in) 2500 × 850
(8'2" × 2'9")
APPLICABLE MODEL GD705A
*: As the front counterweight is removed when installing the front blade, "Additional weight" differs from "Blade weight".
5A-12
Rear Mounted Ripper MOTOR GRADERS
Specifications
5A-13
Upper Attachments MOTOR GRADERS
5A-14
Tire Availability and TMPH MOTOR GRADERS
5A-15
Attachments and Options MOTOR GRADERS
ROPS cab
ROPS canopy
Steel cab
Canopy
Rear under
Extension blade view mirror
Hydraulic tip control
Blade accumulator
Blade float
Rear mounted ripper
5A-16
Attachments and Options MOTOR GRADERS
Description Features
ROPS (Roll Over Protective Structure) cab
The combination of ROPS and a steel cab ensures
safety in places where there is danger of the machine
turning over and to protect the operator from wind, rain,
cold, sand and sun.
Low profile and full height cabs are available. Full height
ROPS cab is 90 mm (3.5")higher than the low profile
cab.
ROPS canopy
5A-17
Attachments and Options MOTOR GRADERS
Description Features
Front blade
Push plate
Scarifier
This attachment digs up hard ground, like asphalt, old
pavement and frozen surfaces cannot be removed by
the blade. The number of teeth used depends upon the
ground hardness.
High-strength alloy steel tips can be mounted on the
teeth to prevent tooth wear and extend their service for
economical performance.
Extension blade
Blade accumulator
5A-18
Attachments and Options MOTOR GRADERS
Description Features
Blade float
Wet type disc brake The brakes are sealed type, so no water or mud can get
in.
This ensures stable braking at all times. Oil lubrication
means wear is kept to the minimum, so the brakes are
maintenance free.
The brakes are operated pneumatically, so a small
operating effort of brake pedal gives secure braking.
There are two brake circuits, so even if one of the air
circuits should be damaged, it is still possible to brake
the machine.
Air dryer
5A-19