SME-113 D
SERVICE MANUAL
SELF-PROPELLED AERIAL PLATFORM
SR-210
Applied to Specification
E1, F1.
MACH
CORPORATION
1152, RYOKE, AGEO, SAITAMA, JAPAN.INTRODUCTION
This manual describes correct adjustment and servicing procedures
for $R210 Self-propelled aerial platform in order to ensure the most
effective use of superb performance and excellent features for your
satisfaction.
Read this manual carefully and understand the descriptions correctly
before making any repair or maintenance works.
Always be sure of the following items when conducting repair or
maintenance works.
3X Use only the spare parts approved by the manufacturer, particularly
for load-supporting and safety-related components.
3X Do not make any modifications to the machine without obtaining the
manufacturer's approval.
3X The design check, the manufacturing check as well as the practical
test should be conducted by the approved agent, if the modification
which would affect the stability, strength or performance of the machine
is made.
Please, note that the numerical values in this manual may be subject to
change due to engineering improvement.
Customer Service Division
AICHI CORPORATIONIN DEX
ee
GENERAL. INFORMATION ~
OVERALL DIMENSIONS -
SPECIFICATIONS ———
WORKING RANGE CHART
MECHANICAL SECTION
BOOM
1. Sectional drawings
2. Inspection procedures
3. Extension/Retraction wire ropes ~~
4. Teusion of wire ropes...
5. Tension of clectric cable —
‘Tumtable bearing d 7
PLATFORM ROTATION MECHANISM ~~ —— 2-10
HYDRAULIC SECTION “0
NOTE ON OVERHAULING HYDRAULIC SYSTEM
HYDRAULIC OIL ae
OIL RESERVOIR
IN-LINE FILTER ~
HYDRAULIC PUMP
MAIN CONTROL VALVE NO.1 & NO.Z
1. Mlustrations. ~~
2. Sectional drawings
3. Trouble shooting “~~~
PLATFORM ROTATION SOLENOID VALVE -.
PRIORITY VALVE ~~
SWIVEL JOINT
ROTATION MOTOR UNIT
TRAVEL MOTOR UNIT. ~
ELEVATION CYLINDER “~~~ ;
SINGLE HOLDING VALVE (for Elevation Colina evieninnnn BAB
1. luspection procedures a
EXTENSION CYLINDER =
DOUBLE HOLDING VALVE (for Ex Extension winder Fae eo
1. Inspection procedures ~~~
PLATFORM LEVELING SYSTEM .
1. Note on function ~
2. Inspection procedures...
3. Adjustment of platform level “~
4, Air bleeding procedures
LOWER LEVELING CYLINDER
UPPER LEVELING CYLINDER -—-~