You are on page 1of 6

AB6 EXPAND NORMAL CHECKLIST CLIMB

***CLIMB To be read by PNF******

1. Air-conditioning ............ SET.............PNF

When taking off with both packs off:


– For passenger’s comfort, after setting climb thrust, set one pack on.
– After slats are retracted, set the remaining pack on.
– Check flow bars in line and all air-conditioning indications are normal.

When taking off with both packs supplied by APU: ECON FLOW WHEN PAX < 190
– Set APU bleed switch off after setting climb thrust.
ECON flow may be selected ON if required. Approx 68% airflow is provided.

Both pack off T/O

3.Check flow bar


in-line

1. Pack 1
ON, After 2.Pack 2 ON, After
thrust SLAT retracted

By chatvi AP45 Page 1


APU BLEED ON T/O

APU BLEED OFF


after set CLMB
THRUST

2. APU ...................... OFF......................PNF

SET OFF

3. Gear lever ............. NEUTRAL ...........PNF

เอาไว้ ตรงกลาง
(Neutral)

By chatvi AP45 Page 2


4. Spoilers ............... DISARMED............. LP

กดลงไป

5. Ice protection ............. OFF/ON.........PNF


– Select engine anti-ice and/or wing anti-ice on/off with LP’s consent. (อนุญาต)

6. Ignition ....... OFF/CONT RELIGHT .....PNF


– Set ignition selector to OFF or leave it at CONT RELIGHT according to LP’s discretion.
CONT RELIGHT is only required under heavy icing conditions, heavy rain or severe turbulence.

By chatvi AP45 Page 3


7. External lights ............... SET.............. LP
– Set NOSE T.O light selector to OFF.
– Set both LAND light selectors to OFF before reaching 3000 ft AGL.
– Set WING, RUNWAY TURN OFF selectors to OFF after passing 10000 ft.

OFF ก่อน 3000’

OFF ที 10,000’
SET OFF
After A/B

8. Fuel system .......... CHECKED ...........PNF


– Check that fuel is supplied from CTR tank if CTR tank contains fuel.
– If CTR tank pumps have been switched OFF before takeoff, switch on the CTR tank pumps and check that fuel is
supplied from the CTR tank.

By chatvi AP45 Page 4


9. Seatbelt sign ............ OFF/ON ............. LP
– Setting SEAT BELT switch to OFF may be delayed as required.

10.Pressurization & ventilation ................ CHECKED........PNF


– Check for correct cabin rate of climb.
– Check pressurization & ventilation working properly.

SEE AOM VOL 1 2.2 p1 (limitation) MIN NORMAL MAX

By chatvi AP45 Page 5


11.Altimeters ............... STD/FL__............... P
– Set standby, meter altimeter and pull BARO knob to achieve standard 1013.2 hPa when passing transition altitude.
– Cross check the three altimeters for possible differences by calling out altitude readings.

PULL STD
Standard
FL…..

SET 1013

Checklist completed

By chatvi AP45 Page 6

You might also like