Professional Documents
Culture Documents
CP41B-WES/WGS
Data Sheet
This revolutionary package design allows the lighting designer to reduce the number
of LEDs required and provide a more uniform and unique illuminated appearance than
with other LED solutions.
FEATURES APPLICATIONS
• Viewing Angle:
»» CP41B-WES: 60 degrees
»» CP41B-WGS: 90 degrees
• Lead-Free
• RoHS-Compliant
1
D-CT1092.00
Data Sheet: CL
CP41B-WES/WGS
Forward Current IF 35 mA
Reverse Voltage VR 5 V
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
2 CLD-CT1092.001
Flux Bin Limit (IF = 30 mA) VF Bin Limit (IF = 30 mA)
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
3 CLD-CT1092.001
CIE Chromaticity Diagram
K
00
0 .3 9 0 0
50
K
00
W
v
60
W
t W
K
w
00
0 .3 5 0 0
W
70
r W
K
W u
00
5
80 p
W
W
K
W s
00
m W
90
0 .3 1 0 0 q
0K
4
j W
00
W
n
10
W W
g k
y
W
3
h
W
W
0 .2 7 0 0 e
W
f
2
W
W
c
W
d
W
aW
0 .2 3 0 0
1
b
W
0 .1 9 0 0
0 .2 3 0 0 0 .2 7 0 0 0 .3 1 0 0 0 .3 5 0 0 0 .3 9 0 0
x
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
4 CLD-CT1092.001
Order Code Table*
60 degrees
Luminous Flux (mlm)
Color Kit Number Viewing Angle
Min. Max. Color Bin Code
90 degrees
Luminous Flux (mlm)
Color Kit Number Viewing Angle
Min. Max. Color Bin Code
Notes:
• The above kit numbers represent order codes that include multiple flux-bin and color-bin codes. Only one flux-bin
code and one color-bin code will be shipped on each tube. And single flux-bin code and single color-bin codes will
not be orderable.
• Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
• Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
5 CLD-CT1092.001
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
6 CLD-CT1092.001
Mechanical Dimensions
Document
Burr around bottom No. may
of epoxy SPE/LP377FWH1-90G
be 0.5 mm max.
Rev. No. 01
Unit
mA
mA
V
mW
°C
°C
ec Max.
epoxy bulb)
5°C)
Notes
RoHS Compliance
Min. Typ. Max. Unit
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
--- 3.6 4.4 V
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS),
--- as amended
--- through April
100 21, 2006. µA
Vision Advisory Claim
2130 3800 --- mcd
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
8 CLD-CT1092.001
Package
Features:
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
• The boxes are not water-resistant, and they must be kept away from water and moisture.
• The Tube Pack type of packaging.
• Max 60 pcs per tube.
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
QT Y P CS
RANK Iv X
Vf XX
Hu e XX
Cree, Inc.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and 4600 Silicon Drive
the Cree logo are registered trademarks of Cree, Inc. Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
9 CLD-CT1092.001