Portland, OR 97239 Portland, Oregon: Voice Land Line (503) 244-7965 Long Beach, Washington: Voice Land Line (360) 642-2873 Cellular Telephone: (503) 703 5644 Email: bkade5d3@westpost.net Career Objective A long term, responsible applied physics / professional electrical engineering p osition on technically challenging projects. I provide a theoretical approach ba sed on undergraduate Electrical Engineering focus in communication and control t heory. More than twenty years of practical experience applying this theoretical foundation solidifies the theory. This is further enhanced by graduate study foc used on the theoretical basis of digital communication, electromagnetics and qua ntum mechanics. A position allowing the exercise of my theoretical, trouble-shoo ting and practical project, field experience is desired. Professional Electrical Engineer Licensing Original examination licensing: California Oral examination based comity certification: Nevada (allowed to expire) Arctic design course work based, comity certification: Alaska Comity certification: Oregon, Washington Technical, Computer Software Experience C++, MATLAB, MIST, AutoCAD (versions 7 through 2008) Hewlett Packard assembly and machine languages ATLAS, MAC, BASIC, FORTRAN, Over 30 years of systems failure diagnostic experience. Automated test systems design Professional Experience June 2010 graduate with MS Physics degree (focus on theoretical electromagnetics and quantum mechanics). A minor, focusing in the theoretical basis of digital c ommunication and signal control in the electrical and communication engineering department, was pursued. Over 20 years of Professional Electrical Engineering experience as "responsible engineer" in charge of power generation, distribution and control systems as wel l as communication, control and status definition systems design. Principal engi neering effort has included hospital, commercial, educational, military, governm ent, institutional and transportation facilities. My recent engineering focus ha s been on the presence of wide spectrum energy presence on power distribution sy stems and mitigation of the electromagnetic field effects on digital communicati on and control systems within facilities. I bring solutions via an "outside the box" approach to problems based on integra tion of a wider field of experience in: physics, complex system failure analysis , communication engineering, power engineering and radiative energy engineering than is normally encountered. Solution Approach Most project problems are a result of missing or ambiguous communication of data . Recognizing the absence or ambiguity of data requires experience that spans mu ltiple levels of specialization. Successful project integration requires well-de fined interface coordination between the systems (i.e. the 1998 Mars Orbiter was destroyed when data output from the telemetry system was in English yards, but the guidance system assumed the units of the data were metric). My combined theoretical modeling and working knowledge experience provides a con tinuous subjective overview of the project objective while designing electrical, communication and control systems. This overview provides another quality contr ol loop within the design process that extends beyond the electrical engineering effort. Solution Philosophy From an owner's standpoint, the project objective is to build an efficient, oper ational system within the cost budget. From a Professional Engineering standpoint, the project objective is to build an efficient, operational system within the cost budget that must fail in a manner that does not cause: injury, maiming or death to the users or environment. The requirement for failure mode protection in professional engineering services raises the importance of systems integration in the design process. Responsible Engineering Experience Interface Engineering 1982-1998 Bouillon Engineering 1999-2008 Professional Engineering 2008 through present Graduate Student Physics 2006 through June 2010 Design Experience: * Most recent project work includes: design, fabrication and construction of a V HF antenna array, troubleshooting electronic, fuel combustion control systems, a s well as a commercial, facility life safety, power system expansion. * Over 20 years responsible engineering experience in the design of commercial, educational, health care and military facility remodels, and new construction. S uccessfully completed facility designs from Alaska to Florida and international designs in Nigeria, Angola, Sakhalin Island Siberia and Kazakhstan. * Strong design experience in configuring the facility electrical and communicat ion systems design to allow the optimum construction sequence for operational fa cility remodeling. The existing and new, communication, power and lighting syste m architecture must be coordinated to have minimal impact on ongoing facility op eration during remodel or expansion efforts. * Over 20 years systems design experience with overall facility systems beyond t he standard limits of electrical engineering responsibility allows for an easier , multi discipline, facility design integration at the engineering design level. * Digital and analog communication and control from 5 Millivolt (mV), 5 Microwat t (*W) signals in a 25 Millivolt (mV) background noise system and bandwidth up t o 200 Megahertz (MHz). * On-site power generation/control and distribution of up to 12 Mega-Volt-Ampere s (MVA) and 30 Kilo-Volts (KV). * Lightning radiated/conducted/coupled electromagnetic field control for digital and analog communication systems in high Kuronic rates area (Nigeria) using Far aday surface design concepts. The protected facility had received at least five direct lightning strikes in a six-month period after completion of project. No i nterruption of digital telephone and computer data network operation was experie nced. * Lightning radiated/conducted/coupled Electromagnetic field control for digital and analog cellular communication systems. * Lightning radiated/conducted/coupled Electromagnetic field control for hospita l patient care and monitoring. * 4 years experience in Aerospace electronic / real time data / status acquisiti on system design. Education Portland State University (PSU) M.S.: Physics, (awarded June 2010) Graduate Research Paper on nonlinear Electromagnetic field theory PH course prefix is class offered through the PSU Physics Department Graduate sequence in Quantum Mechanics (PH-511, PH-618, PH-619) Graduate sequence in Classical Electromagnetics (PH-631, PH-632, PH-633) Graduate course in Atmospheric Physics (PH-571) Physics Department MS Qualifying Exam Passed ECE course prefix is class offered through the PSU Electrical & Computer Enginee ring Department Graduate course in Linear Systems Analysis (ECE-518) Graduate course in Signals and Noise (ECE-565) Graduate course in Digital Signal Processing (ECE-566) Graduate course in Statistical Communication Theory (ECE-567) Post baccalaureate engineering studies at UCLA, USC, PSU Oregon State University Course work completed for M.S.: Physical Oceanography Oregon State University B.S.: Electrical Engineering, Minor in Chemistry Further examples of project experience is available on request.