You are on page 1of 3

Subject to change without notice Hans Turck GmbH & Co.

o.KG 2002 Edition: Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

Inductive sensor Ni25-CP40-AP6X2

rectangular, height 40 mm plastic, PBT-GF30-V0 3-wire DC, 10...30 VDC normally open pnp output terminal chamber

LED 5,3 30 M20 x 1,5 60 34 114

40 40 46

Wiring diagram
1 3 pnp 4 +

Type Ident-No. Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature Rated operational voltage (DC) UB Max. ripple Rated operational current (DC) Ie No-load current I0 Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie Wire breakage / reverse polarity protection Housing style Dimensions Housing material Active face Wiring Clamping ability Vibration resistance Shock resistance Degree of protection Supply voltage indication Switching status indication

Ni25-CP40-AP6X2 16022 25 mm non-flush 3... 15 % 2 % 10 % -25 ...+ 70 C 10... 30 VDC 10 % Upp 200 mA 15 mA 0,1 mA 0,25 kHz 0,5 kV 3-wire, normally open, PNP yes, cyclic 1,8 V yes / complete rectangular; CP40 114 x 40 x 40 mm plastic, PBT-GF30-V0 plastic, PBT-GF30-V0 terminal chamber 2,5 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 LED green LED yellow

Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil.

Subject to change without notice Hans Turck GmbH & Co.KG 2002 Edition: 15.04.2004 Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

Subject to change without notice Hans Turck GmbH & Co.KG 2002 Edition: Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

Inductive sensor Ni25-CP40-AP6X2

Mounting instructions Gap D Gap W Gap S Gap G Gap N Width of active face B

minimum gap 3xB 3 x Sn 1,5 x B 6 x Sn 1xB 40 mm

S D

Subject to change without notice Hans Turck GmbH & Co.KG 2002 Edition: 15.04.2004

Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

Subject to change without notice Hans Turck GmbH & Co.KG 2002 Edition: Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

Inductive sensor Ni25-CP40-AP6X2

Accessories
Typ SG40 IdentNo. 69500 Description protective housing; housing material: PA (per UL94/ V-2); cover: PBT-GF30; for harsh environments; protection degree IP68, 5 m w.g. Dimension drawing

50 75

55

67 50

143 190

JS 025/037

69429

mounting rail; material: VA 1.4301


40 5,3

70 30 5 100

Subject to change without notice Hans Turck GmbH & Co.KG 2002 Edition: 15.04.2004

Hans Turck GmbH & Co.KG Postfach D-45466 Mlheim an der Ruhr Telefon 02 08/49 52-0 Telefax 02 08/49 52-264

You might also like