Professional Documents
Culture Documents
Page 1 of 5
Buttweld Fittings Flanges Blind Flanges Slip on Flanges Socket Welding Flanges Lap joint Flanges Threaded Flanges Weld Neck Flanges Pipes & Tubes Carbon Alloy Steel Stainless Duplex Steel Nickel Copper Alloy Sheets, Plates & Coils Carbon steel plates coils Alloy steel plates- SA 387
Carbon Steel Pipes and Tubes,Alloy Steel Pipes and Tubes,Carbon Steel Pipes and Tubes Manufactu... Page 2 of 5
Nickel Alloy Pipes And Tubes ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 ) ASTM / ASME SB 163 UNS 2201 (NICKEL 201 ) ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 ) ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 ) ASTM / ASME SB 704/705 UNS 8825 INCONEL (825) ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 ) ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625) ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 ) Copper Alloy Pipes And Tubes ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500. ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30) Request a Quote
Grade : Sheet Finishing : Sheet & Plate in Form of : Other Services : Test Certificate : Size :
304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446 & 202 2B, 2D, HR, CR, BA (No. 8), Satin (Met with Plastic Coated) Coils, Foils, Shim Sheet, Perforated Sheet,Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray Etc. Heat Treatment, Annealing, Pickling, Polish, Electroplating,
Anodising, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab. & Under Third Party Inspection. Thickness: 0.1 mm to 48 mm, Width: 1000 mm to 2500 mm, Length: 2000 mm to Coil.
User Industries
Carbon Steel Pipes and Tubes,Alloy Steel Pipes and Tubes,Carbon Steel Pipes and Tubes Manufactu... Page 3 of 5
Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
A240
304
304L
0.03
200
0.045
0.03
0.03
310S
0.08
200
0.045
0.03
1.5
316
0.08
200
0.045
0.03
0.75
316L
0.03
200
0.045
0.03
0.75
10.114.0
16.018.0
317L
0.03
200
0.045
0.03
0.75
11.015.0
18.020.0
321
0.08
200
0.045
0.03
0.75
9.0012.0
17.020.0
Mechanical Requirements Tensile ASTM Grade Strength Apa (ksi) min A240 304 304L 310S 316 316L 317L 321 347 205(30) 170(25) 205(25) 205(30) 170(25) 170(25) 205(30) 205(30) Yield Strength Mpa (ksi) min 205(30) 170(25) 205(25) 205(30) 170(25) 170(25) 205(30) 205(30) Request a Quote 40 40 40 40 40 40 40 40 Elongation min%
Hardness Brinel max HB 202 183 217 217 217 217 217 183
92 92 88 95 95 95 95 92
Carbon Steel Pipes and Tubes,Alloy Steel Pipes and Tubes,Carbon Steel Pipes and Tubes Manufactu... Page 4 of 5
Plate Thickness : to a maximum of 200 mm; Width : from 1250 mm to 2500 mm. Coil Thickness : to a maximum of 20 mm; Width : up to a maximum 2000 mm
Chemical Composition of Sheets/ Plates ASTM Grade 60 A 515 70 C max 0.27 0.33 Mn max 0.9 1.2 0.851.20 0.851.20 0.701.35 0.701.35 P max 0.04 0.04 S max 0.04 0.04 Si max 0.15.04 0.150.40 0.150.40 0.150.40 0.150.40 0.150.40 0.25max 0.25 max 0.80 max 0.80 max 0.35max Ni Cr Mo
A 516
60
0.23
0.04
0.04
0.28
0.04
0.4
0.02
0.04
0.04
0.24
0.04
0.04
0.35max
Mechanical Requirements Tensile ASTM Grade Strength Apa (ksi) min 60 415-550/(6080) 485-620/(7090) 415-550/(6080) 485-620/(7090) 485-620/(7090) 550690/(80100) Yield Strength Mpa (ksi)min 220(32) Elongation min%
A 515
25
70
260(38)
21
A 516
60
220(32)
25
70 Class
260(38)
21
A 537
1 Class 2
345(50)
22
415-60
22
Request a Quote
Carbon Steel Pipes and Tubes,Alloy Steel Pipes and Tubes,Carbon Steel Pipes and Tubes Manufactu... Page 5 of 5
ASTM A387 Class 1 Class 2 9 0.15 0.040.17 0.040.17 0.050.17 0.303.60 0.400.65 0.400.65 0.300.60 0.03 0.3 1 0.500.80 0.150.40 0.5 8.0010.0 1.001.50 0.801.15 2.002.50 0.901.10 0.450.65 0.450.60 0.901.10 5 0.15 0.300.60 0.04 0.03 0.5 4.006.00 0.450.65 Grade C max Mn max P max S max Si max Ni Cr Mo Othe
11
0.04
0.04
12
0.04
0.04
22
0.04
0.035
Mechanical Requirements ASTM Grade Tensile Strength Apa (ksi) min Class 1 5 9 A387 Class 1 Class 2 11 12 22 415-585 415-585 415-585 380-550 415-585 Class 2 515-690 515-690 515-690 450-585 515-690 Yield Strength Mpa (ksi)min Class1 205 205 240 230 205 Request a Quote Class2 310 310 310 275 310 18 18 22 22 18 Elongation min%
92 95 95 95 92
Products
Buttweld Fittings Flanges Pipes & Tubes Sheets, Plates & Coils Blind Flanges | Slip on Flanges | Socket Welding Flanges Threaded Flanges | Weld Neck Flanges Carbon Alloy Steel | Stainless Duplex Steel | | | Lap joint Flanges |
HOME
| PROFILE
| INDUSTRIES WE SERVE
| WHY US?
| CONTACT US
| ENQUIRY
Copyright Amco Metal, All Rights Reserved Site Developed by IndiaMART InterMESH Limited