You are on page 1of 3

RTOS with ARM kit

Product Number: Ec95831

Real-time operating systems are often required in small embedded operating systems that are packaged as part of micro devices. Some kernels can be considered to meet the requirements of a real-time operating system. However, since other components, such as device drivers, are also usually needed for a particular solution, a real-time operating system is usually larger than just the kernel. The Avxi is a hard real-time operating system from Emblitz Technologies. Sometimes known as the Avx, from inception we are working on two agendas! First, the Avxi should be cost effective! Be available to academic and research labs with minimum price! Second the Avxi should be as any other RTOS in market, perfectly match and perform in a) Multitasking b) Process threads that can be prioritized, c) A sufficient number of interrupt levels The first versions of Avxi were written in 2001 in Bangalore, India by Shreyamsa B P and his team and targeted to reach all the Engineering Labs and R&D centers across India. Today Avxi is widely using in applications for avionics, aerospace, the military, industrial process control and telecommunications. Avxi components are designed for absolute determinism (hard real-time performance), which means that they respond within a known period of time. Predictable response times

are ensured even in the presence of heavy I/O due to the kernel's unique threading model, which allows interrupt routines to be extremely short and fast. Unlike other RTOS, Avxi never deny real-time performance for security and protection. Off course Avxi is popular for its security and protection! Board Features: Processor: LPC2129 2x serial ports (one for ISP and the other for serial communication) 2xCAN ports with complete physical layer implementation on board via drivers(MCP2551) JTAG Connector header box in 2x10 pin layout provides ARM-JTAG Interface compatibility 12.00 MHz Crystal RESET button RESET circuit can be also controlled externally by Philips ISP utility via RS232 Dual Power supply (either through USB or using external power adapter). Eight status LEDs with buffers and chip select Four buttons Potentiometer connected to analog input AIN0 BSL jumper for boot loader enable DBG jumper for JTAG enable JRST jumper to enable external RESET control by RS232 One Seven Segment Display with shift register and chip select Single power supply: 7V to 9V DC or can be connected to the USB port of the computer Power supply status LED Three on-board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current Extension headers for all C ports On board prototyping areaLPC2129 Chip Features: 16/32-bit ARM7TDMI-S microcontroller 16 kB on-chip RAM,256 kB Flash Program Memory supports upto 60 MHz frequency. In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. On-chip Embedded-ICE-RT, Embedded Trace Macrocell debugger Two interconnected CAN interfaces with advanced acceptance filters. Four channel 10-bit A/D converter with conversion time as low as 2.44 ms. Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIs Phase-Locked Loop with settling time of 100 ms. Vectored Interrupt Controller with configurable priorities and vector addresses. Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time Clock and Watchdog. Up to forty-six 5V tolerant general purpose I/O pins. Up to nine edge or level sensitive external interrupt pins available. On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz. Two low power modes: Idle and Power-down.

Processor wake-up from Power-down mode via external interrupt. Individual enable/disable of peripheral functions for power optimization. CPU operating voltage range of 1.65V to 1.95V(1.8 V 0.15 V). I/O power supply range of 3.0 V to 3.6 V (3.3 V 10 %) with 5 V tolerant I/O pads. Contents of Kit: ARM starter Kit Evaluation Board JTAG Wiggler JTAG Data Cable (20-pin FRC) Parallel port cable for JTAG USB Cable CAN cable AVXI RTOS Software 1 Software DVD containing Vision Keil IDE, GNU Toolchain, JTAG debugger, Philips ISP Utility, all necessary documentation including Schematic of the Board, User Guide for the board, Quick Start Guide, Data Sheets, and reference manuals, Example codes and Case Studies. 2 Audio/Video CDs introduction to ARM and introduction to Avxi Extra jumpers Guide, Schematics, Example codes and Case studies Lead Time: Will be max 3 days in India. (Ship through DTDC or Professional) and about 7 days for outside India (Ship through UPS or DHL) Warranty: One Year Technical Support: Dedicated team will support for one complete year

FOR QUOTATION OR FOR MORE DETAILS: Emblitz Technologies Pvt Ltd, #738/33, 12th Main, 3rd Blk, Rajajinagar, Bangalore 560010 India www.emblitz.com, order@emblitz.com Phones: 90 80 23140344, 90 80 23146229, Mobile: 09449104615, 09980562847
Copyright 2011 Emblitz Technologies Pvt ltd. Emblitz and Avxi are trademarks of Emblitz technologies Pvt Ltd,.

You might also like