You are on page 1of 20

Time Value of Money and Investment Analysis

Explanations and Spreadsheet Applications for Agricultural and Agribusiness Firms

Part II.
by Bruce J. Sherrick Paul N. Ellinger David A. Lins

V 1.2, September 2000

The Center for Farm and Rural Business Finance Department of Agricultural and Consumer Economics and Department of Finance University of Illinois, Urbana-Champaign

Time Value of Money and Investment Analysis


Table of Contents

Part II: INVESTMENT ANALYSIS AND CAPITAL BUDGETING . . . . . . . . . . . . . . . . . . 17 Information Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Expected Net After-Tax Cash Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Discount Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Planning Horizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Terms of Financing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Marginal Tax Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Net Present Value Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Special Problems in Measuring Cash Flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Working Capital Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Sunk Costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Opportunity Costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Synergies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Diversions and cannibalism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Internal Rate of Return (IRR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Problems with IRR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Different Lengths of Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

TIME VALUE OF MONEY AND INVESTMENT ANALYSIS


PART II: INVESTMENT ANALYSIS AND CAPITAL BUDGETING

This section develops the necessary background for investment analysis and capital budgeting techniques using the methods discussed and described in Part I. Building on the materials from Part I, the impacts of taxes, differential financing terms, depreciation and other items affecting cash flows, are each addressed. In addition, methods for dealing with unequal lives or different sizes of competing projects are discussed, as are special problems in ranking competing projects.

The two basic issues associated with an investment decision are its feasibility and its desirability. Feasibility refers to the ability to actually access the necessary capital and complete the project. Clearly an investment could promise highly desirable levels of returns, but simply be infeasible in terms of the initial cash flow requirements -- the simplest illustration of a budget constraint. Alternatively, an investment may be affordable and completely feasible, but the returns could be so low as to make the investment alternative unattractive. In the examples which follow, it is shown how investments can be evaluated in the context of both returns and cash flow feasibility.

There are a variety of ways by which one can evaluate returns on investment options. Five of the most common are: (1) net present value method, (2) internal rate of return methods, (3) profitability index or Q methods, (4) payback or breakeven period methods, (5) the average rate of return on investment. A study in Financial Management indicated that the capital budgeting practices employed most by large firms to make decisions were internal rate of return methods (88%) and net present value methods (63%).1 Both the payback and the average rate of return approaches fail to account for the time value of money. And, the profitability index simply a variant of the NPV approach that is used to control for size effects. Consequently, the following discussion focuses on net present value and internal rate of return methods of evaluating investments. These two methods are the most commonly

Bierman, H., Capital Budgeting in 1992: A Survey, Financial Management, Fall 1993: 24.

17

employed in practice, both account for the time value of money, and together they provide the most meaningful decision making information in investment analysis and capital budgeting situations.

Information Needs The following information is needed to evaluate investments using time value of money concepts: (1) (2) (3) (4) (5) the expected net after-tax cash flows (NATCF, or ATNCF) for the investment by period including a salvage value, if any, an appropriate interest rate or discount rate, the length of planning horizon, terms of financing if borrowed funds are used, the marginal tax bracket of the borrower, and the taxability status for each cash flow.

A brief discussion of each of these items follows:

Expected Net After-Tax Cash Flow: Note that net cash flows from the business rather than accounting profits are used in capital budgeting applications. The net cash flow is the stream of cash that is either required as an outflow, or that could be withdrawn by the owner or reinvested in the business. The cash inflows include all flow values generated by the investment, and must be considered at each point in time at which the flows occur, whether they are actually withdrawn or not. Cash outflows include the original payment for the investment itself, taxes, and all other expenses to implement the investment. These net cash flows for every period must then be put on an after tax basis, before discounting.

18

The net after tax flow per period can normally be calculated by the following procedure: i). ii). iii). iv). Cash inflow - cash outflow = net before tax flow Net before tax flow - depreciation = taxable income Taxable income * marginal tax rate = tax payment Cash inflow - cash outflow - tax payment = net after tax cash flow

Consider the following example described in Table 1 below. A firm is considering an investment which costs $50,000 at inception and is expected to last 10 years. The investment is expected to generate additional cash income of $13,000 per year and $2,000 of additional cash expenses per year. The investment can also be depreciated to zero on straight-line basis over 5 years, generating a noncash deduction against taxable income of $10,000 per year. The investment is expected to have a salvage value of $2,000 at the end of 10 years and the firm is in a 30% marginal tax bracket. Given this situation, the after-tax cash flows can be shown in Table 1 below: Note that if borrowed money were used to purchase the original investment, the interest portion of any loan payments would have been an expense to reduce taxable income, and the principal payments represent additional negative cash flows, and some of the initial negative cash flow would have been offset by borrowed funds. The additional issues created by debt financing are treated later.

19

Table 1. After Tax Cash Flow Computations Year 0 (Now) Years 1-5 -$50,000 $13,000 -$2,000 $11,000 -$10,000 1,000 x .30 $300 (Outflow for Investment) Added Cash Income Added Cash Expenses Cash Income Before Depreciation Depreciation Taxable Income Marginal Tax Rate Taxes Paid

Cash Flow/Year = $11,000 - $300 = $10,700/yr. Year 6-10 $13,000 -$2,000 $11,000 -0 $11,000 x .30 $3,3000 Added Cash Income Added Cash Expenses Cash Income Depreciation Taxable Income Marginal Tax Rate Taxes Paid

Cash Flow/Year = $11,000 - $3,300 = $7,700/yr. Year 10 $2000 Salvage Value x .30 Marginal Tax Rate $600 Taxes Paid Cash Flow = $2,000 - $600 = $1,400

Discount Rate: The discount rate reflects the appropriate cost of capital or rate of return on the investment (often an interest rate, or cost of capital calculation). Several different concepts underlie the choice of an appropriate discount rate. The first concept is a "consistency principle" -- the idea that the discount rate should be consistent with the cash flows being discounted. For example, if nominal after-tax cash flows are being discounted, then a nominal after-tax discount rate should be used. If real cash flows are being discounted, then a real discount rate should be used. In other words, the discount rate should be in the same form as the cash flows being discounted.

20

A second concept in determining discount rates relates to the issue of risk. The discount rate chosen should reflect the degree of risk associated with the investment under consideration. For example, suppose you are considering two investments--A and B. Suppose further that the expected cash flows for investment A are quite low, but very certain, while expected cash flows for B are much higher, but much more uncertain. Using the same discount rate would not reflect this difference in risk and could bias decisions toward acceptance of risky projects.

A third concept in identifying the discount rates relates to the effects of the investment on the capital structure--the proportion of debt capital versus equity capital--of the firm. For large diversified firms that can easily adjust capital structure through debt and equity issuances, it is quite common to measure the discount rate as the weighted average cost of debt and equity capital, adjusted for the degree of risk if the new project has a different degree of risk than the firms overall assets. For smaller firms, such as many farms and smaller agribusiness firms, it is common to use the cost of equity capital as a measure of the discount rate. This approach recognizes that for small firms, a new investment may significantly alter the capital structure of the firm. Under this approach, the discount rate reflects what equity capital could earn in its best alternative use.

Planning Horizon: The planning horizon is the length of time over which the project is being evaluated. It is normal to use the length of time over which the project is expected to last or until it is expected to be sold. For example, suppose you plan to buy a machine, use it for 5 years and then sell or trade it in on a new machine. The length of planning horizon in this case is 5 years even if machine purchase were financed with a three year loan.

In evaluating several investment alternatives, care must be taken if the investments have unequal lives or different planning horizons. A subsequent section identifies procedures for comparing investments which have different planning horizons.

21

Terms of Financing: The terms of financing include the amount of downpayment, the length of loan, frequency of payments, interest rate, and loan servicing charges. In evaluating investment alternatives it is important to recognize that differences in terms of financing between two investment options can have a significant impact on the ranking of the two investment alternatives. This issue is of particular importance on investments involving the purchase of land where the buyer may have an alternative between seller financing and financing provided by a commercial lender. An example provided later shows how to evaluate the trade-offs between price and interest rate terms on land purchases.

Marginal Tax Bracket: The tax bracket of an investor is often a crucial variable which influences investment decisions. The relevant tax bracket in investment analysis is the marginal tax rate, or what percentage of taxes would be paid on additional or incremental taxable income associated with the project. Use of a marginal tax rate rather than an average tax rate is consistent with the economic principle of evaluating investments according to what they add or subtract from an existing business.

Net Present Value Approach The following example provided in Table 2 illustrates the appropriate procedures for solving simple investment-type problems. Consider an investment that costs $6,000 initially. It is expected to yield a net cash inflow of $1,500 per year for 5 years and have an expected salvage value of $1,500 at the end of 5 years. Assume an 8 percent after-tax discount rate.

22

Table 2. Net Present Value Calculations Net After-Tax Cash Period 0 1-4 5 Flow -$6,000 +$1,500 +$3,000 8% Present Value Factor* 1.0 3.31213 .68058 Net Present Value (NPV)
*

Present Value (Rounded) -$6,000 +$4,968 +$2,042 = $1,010

For single payments, the PV factor is the same as the SPPV factor per $1 payment, or (1+r) -n. For a series, as in the

middle row labeled Period 1-4", it contains the results of the USPV formula per $1 needed to generate the value as of the initial time period.

A negative cash flow reflects the outflow (in this example, the initial payment for the purchase) while the positive signs indicate net inflows. A common criterion for acceptance or rejection of a given project, abstracting from risk considerations and budget constraints, is to accept projects with positive NPV values and reject those with NPV values less than zero. At NPV = 0, the return is equal to the cost of capital, and the investor would be indifferent to making the investment or not. In the example above, note the technique used to discount the equal $1,500 flow per year for four years. The USPV factor can be used to discount an entire stream of income with one calculation. In year five, there is a salvage value of $1,500 plus the $1,500 net operating inflow, for a total of $3,000. For amounts different than the uniform flow, the SPPV factor must be applied. A positive NPV of $1,010 for the sample problem suggests the investment should be made.

It is important to recognize that the NPV of $1,010 is not the amount of profit made by undertaking this investment. Rather, it is the amount by which this investment exceeds the return from the next best investment. The next best investment generates an 8% after-tax return as reflected by the discount rate. Remember, net present value is a measure of net cash returns expressed in today's dollars, and is not a measure of profit made on an investment.

23

Special Problems in Measuring Cash Flows In discounting after-tax cash flows, it is important to include all cash flow items that belong in the analysis and exclude those that do not belong. As a general rule, all incremental cash flows should be included, i.e., all cash flows which result from making the investment. In cases where two competing projects are made, many of the incremental cash flows or benefits are equivalent between the two options and can be canceled by evaluating the NPV of one project minus the other. But in most cases, all flow values that differ with or without the project should be included. Sometimes these incremental cash flows are complicated to isolate, or appear to exist when they really do not. Below, some of the common pitfalls in measuring cash flows are provided along with guidance on how they should be treated.

Working Capital Requirements Most investment opportunities for agricultural businesses, or other businesses require some capital expenditure including the purchases of land, buildings or machinery. For example, a hog producer may build new confinement facilities to expand the size of the hog operation, or a meat packer might build and equip a new slaughter house. In doing a net present value calculation of these investment alternatives, it is important to remember that working capital requirements will also likely increase as a result of the expansion. For example, the hog producer will likely have more feed and livestock inventory as a result of the expansion. Likewise, the packer will have a larger inventory of slaughtered hogs. These increases in working capital must be accounted for as a cash outflow to do a proper net present value calculation of the expansion option. If this working capital is sold or returned at the end of investment period, an inflow of cash occurs from the sale of inventories or other items that return working capital at the end of the investment, much like a salvage value. In any case, the investment of additional working capital should be treated in terms of its incremental cash flows.

Sunk Costs Suppose a farmer spends $1,000 over a 6 month period searching for a property to expand the size of the operation. A parcel is now found and the farmer wants to do a net present

24

value analysis of the purchase. However, the $1,000 spend searching for the property should not be included as a cash outflow in this calculation. The reason is that it is now a sunk cost and will exist whether the farmer does or does not buy the current property under consideration. Thus, it has no bearing on the financial rewards from the decision at hand. Although it is a real expense, it is not an incremental cash flow associated with the investment because it is not affected by the acceptance or rejection decision about the project.

Opportunity Costs Suppose an agribusiness firm is considering a new product line that will use up existing excess capacity in the firm's manufacturing plant. As a result, the firm will need to expand the size of their plant at the end of the second year rather than at the end of the fourth year. Should a net present value analysis of the new product line include a charge for using up existing excess capacity. The answer here is yes, because it causes the firm to rebuild in year two versus the current plans which call for expansion in the fourth year.

As another example, suppose a farmer is doing a net present value analysis of a slurry store handling system versus a lagoon system. To construct the lagoon, the farmer will need to take 2 acres of land out of production. In doing the net present value analysis, one should account for the opportunity cost of using the land for something other than a lagoon. Perhaps more importantly in this case, there is an important contingency cost that can be thought about as the cost of insuring against liability created by the lagoon. Many companies explicitly budget to fund a legal reserve associated with new projects.

Synergies Suppose you were considering the addition of a new project that utilized products produced elsewhere in your operation, or otherwise contributed to the profitability of your operation. For example, suppose you run a pick your own orchard and are considering the addition of pony rides and Halloween hayrides. In addition to measuring the direct cash flows from the additional projects, the potential increase in apple sales while the new customers are on site should be included.

25

Diversions and cannibalism Suppose you now running a pick your own orchard and are considering the addition of a cider press to expand your product line. Clearly the value of the apples used in production should be accounted for in the NPV calculation, but so should any reduction in fresh apple sales that might occur if the availability of cider reduces the demand for fresh apples. (The example might be more obvious if prunes were replaced by apples, except that the authors know of no prune orchards). Cannibalism effects have been frequently noted in food manufacturing businesses. For example, when Post introduced Dino Pebbles to compete with Kelloggs Marshmallow Krispies, the main effect was in the reduction of sales of Posts other similar line -- Fruity Pebbles. This case illustrates the importance of including any lost revenues associated with other projects owned by the same person or firm as a cost of the project being evaluated.

Internal Rate of Return (IRR) NPV analysis results in a dollar-valued answer based on discounting cash inflows and cash outflows. Given no capital constraints, all projects generating positive NPV values would be accepted. However, because the NPV is simply a dollar value, it does not provide a measure of the rate of return generated by the project. And, NPV results are not always sufficient to evaluate the desirability of two very different sized projects. For example, suppose project A has NPVA = $100, and project B has NPVB = $105. If they were otherwise equal, project B would be more desired. However, if project B had twice as large an initial cost, and its acceptance prohibited other positive NPV projects, then project A may be more desirable. Thus, complementary information about the effective yield provided per dollar of cash flow in the project is also useful to know. That measure is the internal rate of return or IRR. Its solution uses the same principles that are employed in NPV calculations except that the discount rate being solved for is the one that results in the project having an NPV of zero. In this sense, it is simply the highest costs of capital that would make the project exactly break even in terms of the NPV. If the actual discount rate or cost of capital is less than the IRR, then the project is viewed as a desirable project because it generates more than it costs. If the IRR is lower than the costs of capital or negative, then the project is not desirable and should be rejected. 26

To illustrate, the example problem used above to illustrate the basic NPV approach is solved for its IRR. The IRR is the discount rate that results in the present value of the inflows and the present value of the outflows being exactly equal and thus resulting in NPV equal 0. Because the discount rate in the time value of money formulas is inside an equation that often has an exponent greater than one, it often cannot be algebraically isolated and analytically solved. Fortunately, most financial calculators can be used to compute an IRR for the basic types of problems. Moreover, trial and error approaches converge fairly rapidly toward a solution, and simple interpolation methods are easily used at any stage of a trial and error process. Finally, the spreadsheet supplied with this booklet also contains a simple facility to calculate the IRR for most analyses.

In attempting to solve for the IRR by hand, a trial and error process can be used to bracket the answer fairly quickly. Depending on the precision needed, the search can then be stopped and any two answers used to interpolate (or extrapolate) an approximate answer. To do so, the common steps are: (1) guess a discount rate and solve for the NPV. If the NPV is positive, then increase the discount rate and try again. (2) If the trial NPV is negative, decrease the trial discount rate and recalculate. (3) Repeat this search until you have two trial discount rates that bracket the answer (one negative NPV and one positive NPV). Then, (4) a manual method of bisection search can be used to locate the exact solution. The bisection involves the following approach. First take the average of the two rates that are known to bracket the IRR and recompute the NPV at the average rate. If the NPV is positive, use the average and the higher rate for the next bracket. If the NPV at the average rate is negative, then use the average and the lower rate for the next bracket. Then, re-average the rates from the new bracket and repeat the process until the NPV is suitably close to zero. At any time, the two rates that bracket the IRR can also be used in a process known as interpolation to approximate the answer. The interpolation process is illustrated below using the same example that was used to demonstrate the NPV technique above.

27

Table 3. Interpolation Calculation Inputs Present Value Factors Period 0 1-4 5 Net After Tax Cash Flow -$6,000 +1,500 +3,000 1.0 3.03735 .56743 12% 1.0 2.91371 .51937 14% Present Value at 12% -$6,000 +$4,556 +$1,702 +$258 at 14% -$6,000 +$4,371 +$1,558 - $71

Net Present Value (NPV) =

Table 3 above shows that at a 12 percent discount rate, the NPV is still positive, but at 14 percent it is negative, an thus the IRR is bracketed between 12 and 14 percent. To illustrate the idea of interpolation, first refer to the figure below.

Interpolation relies on simple proportionality arguments as follows. If items a, b, c, d, and f are known, then e can be found by noticing that e is, in a proportion sense, at the same relative position between d and f as b is between a and c. Thus, even if the scale for the items below the line differs from the items above the line, the fractions of the distances will be the same. It is an identity that b = a + (b-a), and multiplying the term in parenthesis by (c-a)/(c-a) leaves it unchanged, thus:

[13]

b=a+

(b a) *(c a) (c a )

And, (b-a)/(c-a) equals (e-d)/(f-d), and thus, by proportionality:

[14]

e= d+

(b a) * ( f d) (c a) 28

To use this technique to solve for the IRR, note that two discount rates are known and three NPVs are known, namely $258, -$71, and $0 the point for which the IRR is needed. Graphically,

Thus, IRR = 14% + ($0-(-$71))/($258-($-71)) * (12%-14%), or in this case13.57%. Be careful not to be confused by the signs and negative numbers, and make certain to keep the proper discount rates associated with the proper NPVs when doing these calculations.

The interpolation process is only a close approximation of the true IRR. Using the previous example, a more accurate numeric search produces a resulting IRR of 13.55%. The relationship between the discount rate and the NPV is not linear, and thus the linear approximation provided by the interpolation will not be exact. Of course, the wider the range of values over which you interpolate, the greater the potential degree of inaccuracy in your answer. And, surprisingly, the error is usually greatest when the IRR is approximately evenly bracketed by the endpoints, with the approximation improving the closer the sought value is to one of the endpoints. Thus, it is more important to get at least one of the endpoints to have an NPV near zero than to find similar sized positive and negative values.

Problems with IRR In addition to problems associated with calculating an IRR, there are several other issues with which the user should be aware. First, if the series of cash flows has more than one sign reversal (changes from a positive to a negative cash flow, or vise versa) then there are multiple solutions. For example, there are two sign changes in the following series of cash flows (Table 4 below) and thus we have two IRRs, in this case equal to 25% and 400%.

29

Table 4. Multiple IRRs Illustrated Time 0 1 2 Cash Flow - 4,000 + 25,000 - 25,000

In fact, according to Descartes rule of signs, there are as many roots (solutions) as there are changes in signs, so a problem with 4 sign reversals would have 4 different solutions. To deal with this issue, a modified internal rate of return, or MIRR, is often used. Under this approach, all negative cash flows are first treated as a single problem and placed into an equivalent negative single present value. Then, all positive cash flows are treated as a single problem and represented as a single positive future value. Finally, NPV methods are applied to the two values the negative single initial value and the positive single future value as though these were the only two cash flows and therefore having only one solution. Note that to use the MIRR approach, a discount rate is needed in the first stage to compute the single positive and negative values. It is suggested that the firms cost of capital be used for this stage to compute both the present value of the cash outflows and the future value of the positive cash flows. Denoting the present value of the cash outflows as P0- and the future value of the positive cash flows as Pn+, the MIRR is the discount rate, r, that solves: P0-(1+r)n = Pn+

[15]

The MIRR is also used in cases where the IRR is unrealistically influenced by the assumption that the cash flows can be reinvested in the project at the same long-run rate of return. In this case, using the MIRR approach is useful because a lower, often more realistic cost of capital is used to first convert cash flows to a future value that is then used to solve for an MIRR assuming that cash flows are taken out of the project and employed elsewhere in the firm at a return equal to the discount rate.

30

A second potential problem is if that if all cash flows are all of the same sign, then no solution exists. For example, if an investment generates only positive cash flows, then the NPV of the investment can easily be calculated, but an IRR does not exist as it represents an infinite return. The example below in Table 5 illustrates this point (however, few projects generate only positive cash flows with no initial investment, so in practice this problem is rare).

Table 5. Illustration of Non Existent IRR 10% Present Time 1 2 3 Cash Flow 1,000 3,000 3,000 Value Factor .90909 .82645 .75131 Net Present Value IRR Present Value 909.09 2,479.35 2,253.93 5,642.37 NA

A third issue in interpreting IRR is that of borrowing versus lending or investing. Consider the following projects A and B, with cash flows as shown in Table 6.

Table 6. IRRs under Lending versus Borrowing Cash Flows at: Project A B t=0 -2,000 +2,000 t=1 +2,400 -2,400 IRR +20% +20% NPV at: 10 percent $181.82 -181.82

Notice each project has an IRR of 20%, but A has a positive NPV while B has a negative NPV. Project A represents an investment which is, in essence, lending money at a rate of 20%. When lending

31

money, the highest IRR is preferred. For Project B is in essence a case of borrowing with a positive cash flow today followed by the repayment at time 1. In this case, the IRR indicates an interest rate on borrowed money of 20%. When borrowing, the lowest IRR is preferred. The point is that the IRR alone does not indicate whether the project is a borrowing or lending style investment, a fact which can lead to confusion on how to interpret the IRR number.

Different Lengths of Life Frequently, otherwise comparable investments have different lengths of life. With the simplest NPV approach, the net present value of two investments cannot be directly compared if different time horizons are involved. There are two alternatives to correctly solves such problems, as illustrated in the following example. Assume you have two alternative machinery investment programs which would perform equally for you. The goal is to compare the present value of the cost streams for these two alternatives, allowing one to choose the alternative that offers the lowest cost stream. The specific characteristics are in Table 7 below.

Table 7. Unequal Length of Life Comparisons Machine X Original Cost Projected Economic Life (planning horizon) Projected After Tax Annual Cash Outflows Neither machine has a salvage value. The discount rate is 10 percent. Machine X 10% Period 0 1-4 Flow -$10,000 -$3,200 Factor 1.0 3.16987 NPV = P.V. -$10,000 -$10,144 -$20,144 Period 0 11-6 Flow -$12,000 -$3,500 Factor 1.0 4.35526 NPV = Machine Y 10% P.V. -$12,000 -$15,243 -$27,242 $10,000 4 years $3,200 Machine Y $12,000 6 years $3,500

32

It is incorrect to compare the two net present values since the machines have different lengths of life. The easiest way to put the two analyses on a comparable basis is to put each on an annuity equivalent (AE) basis. Under the AE approach, the size of annual annuity is determined for the economic life of the investment that could be provided by a sum equal to the present value of its projected cashflow stream. To use this approach, the capital recovery formula is applied to determine the annual equivalent cash flow to be able to compare investments with different lives. Comparing the two options, Machine X has an annuitized value of its NPV = -$20,144 of -$6,355 per year for 4 years and Machine Y has an annuitized value of its NPV = -$27,242 of -$6,255 per year for 6 years. Note that these values are equivalent to the size of loan payments needed to pay off a 4 year $20,144 loan and a 6-year $27,242 loan respectively. In this case, Machine Y is preferred, as it has the lowest annuity equivalent, even though the NPV of its cost was greater.

The second possible alternative for solving problems with different lives is to use a least common denominator of time and figure more than one life span. This approach is known as a replacement chain and simply involves repeating both investments until they end at the same point in time. In the above problem, twelve years is the first point in time that repeated investments in each machine would end. Machine X would be replaced at the end of year 4 and year 8. Machine Y would be replaced at the end of year 6 as shown in Table 8.

Table 8. Replacement Chain Comparison of Unequal Length of Life Investments


Machine X 10% Period 0 4 8 1-12 Flow -$10,000 -$10,000 -$10,000 -$ 3,200 Factor 1.0 .68301 .46651 6.81369 NPV = P.V. -$10,000 -$ 6,830 -$ 4,665 -$21,804 -$43,299 NPV = -$42,622 Period 0 6 1-12 Flow -$12,000 -$12,000 $ 3,500 Machine Y 10% Factor 1.0 .56447 6.81369 P.V. -$12,000 -$ 6,774 -$23,848

33

This process puts the two investments on an equal time horizon and generates conceptually correct answers. The NPVs shown above can be directly compared this time since the replacement chains are of equal length. Again, Machine Y is shown to be the best investment, since it has the lower NPV of the cost stream.

34

You might also like