You are on page 1of 22

A PROJECT SEMINAR ON

Automated Hotel Management System

Presented By: G.MURALIKRISHNA(07591A0481) K.SAIKUMAR(07591A0485) Under The Guidance Of

K.L.RAO

EXISTING SYSTEM

AIM :
The main objective of this project is to reduce the manual intervention in Hotel Management through Automation, which will lead to greater customer satisfaction.

PROJECT OVERVIEW
The project mainly consists of three modules namely: 1.Table module 2.Chef module 3.Cashier module

The communication between these three module is carried by using RF Technology

Block Diagram
Table Module :

CHEF MODULE:

Cashier Module:

RF TECHNOLOGY:
Radio frequency (RF) is a frequency or rate of oscillation within the range of about 3 Hz to 300 GHz. This range corresponds to frequency of alternating current electrical signals used to produce and detect radio waves. Radio frequency (RF) is a frequency or rate of oscillation
within the range of about 3 Hz to 300 GHz The main requirements for RF communication are

1.RF transmitter
2.RF receiver 3.Encoder and Decoder

RF Transmitter:
The transmitter which we are using is STT433MHZ The STT-433 is ideal for remote control applications where low cost and longer range is required.

Features 433.92 MHz Frequency Low Cost 1.5-12V operation Small size

RF receiver:
The receiver witch we used is STR 433MHZ The data is received by the RF receiver from the antenna pin and this data is available on the data pins.

Two Data pins are provided in the receiver module. Thus, this data can be used for further applications.

ENCODER
The encoder which we are using is HT640 It is an 24 pin IC

DECODER
The decoder which we are using is HT648 It is an 24 pin IC

LCD(2*16)
LCD stands for liquid crystal display

LCD consists of 2 lines with 16 characters


Each character consists 5*7 dot matrix

TABLE CIRCUIT

CHEF CIRCUIT

CASHIER CIRCUIT

SOFTWARE REQUIREMENTS 1.KEIL v3 2.PROLOAD

ADVANTAGES:
Allow user to take detailed orders as per client's specifications Immediate preparing of orders in kitchen Order Tracking Screen for Supervisors/Managers Higher Sales Revenue & Better Customer Satisfaction

DISADVANTAGE:
If we use the jammer circuit the communication between these module does not work

FUTURE ENHANCEMENT

CONCLUSION
The implementation of the project Automatic Hotel management using microcontroller is done successfully. The communication is properly done without any interference between different modules in the design .

The performance of the system is more efficient. Continuously reading the signal from the Tx, read the message if any and display it on the LCD is the main job carried out by the microcontroller. The mechanism is controlled by the microcontroller.

REFERENCES
[1] Muhammad Ali Mazidi , Janice Gillispie Mazidi, Rolin D. Mckinlay. Second edition, THE 8051 MICROCONTROLLER AND EMBEDDED SYSTEM [2] K. J. Ayala. Third edition, The 8051 MICROCONTROLLER [3] www.8051projects.net/microcontroller_tutorials/ [4] www.8051projects.net/lcd-interfacing/

You might also like