Professional Documents
Culture Documents
06/28/15
www.huawei.com
ISSUE 8.0
GSM BSS Case and Training
Huawei Confidential
Huawei Confidential
Page 2
Huawei Confidential
Page 3
Huawei Confidential
Page 4
Huawei Confidential
Page 5
When the RNP or RNO engineers need to modify mass incumbent BSC6000
configuration data, they can modify BSC6000 configuration data through running
MML command script in batches.
When a few configuration data need to be modified, every single MML command
can be run to execute the function.
Huawei Confidential
Page 6
START LMT
On BSC6000 Local
Maintenance Terminal, choose
System > Execute MML Client.
On BSC6000 Local
Maintenance Terminal, click the
icon
Maintenance Terminal.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
Interface
Menu bar
Tool bar
Navigation tree
Command
window
Output window
Status bar
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
Note: The only difference between the two configuration modes is the
process that the configuration data takes effect.
Huawei Confidential
Page 9
Command display
Command
input
Save
Parameters input
Huawei Confidential
Page 10
The default path for saving input commands is: LMT installation directory \
client \ output \ BSC6000 \ version number \ batch \.
or
Huawei Confidential
Page 11
Operation
succeeded
Huawei Confidential
Page 12
at a time. The pre-edited batch file is run on the Local Maintenance Terminal so
that you do not need to manually run every MML
command.
The batch file is a plain text file. It contains a group of command scripts for a
Timing batch command: The operator set in advance the date and time when the
batch file is run. The system automatically run the batch file on the date and at the
time.
Huawei Confidential
Page 13
Huawei Confidential
Page 14
Huawei Confidential
Page 15
to
Click
Huawei Confidential
Page 16
to
Huawei Confidential
Page 17
file.
Click
Set all the parameters in Add Batch Task dialog box, and then click
Caution: Do not close the MML Batch dialog box. If you close it, the
batch task will be deleted.
Huawei Confidential
Page 18
The BSC global data is determined during network planning. It is the basis of
the configuration of all the other data.
BSC Attributes
Subrack-OSP Mapping
over TDM)
Huawei Confidential
Page 19
BSC Attributes
Table 1 Example of data to be negotiated and planned for configuring BSC attributes:
Parameter Type
Basic Data
Parameter
Example
Source
BSC Name
BSC-1
Network planning
Country Code
86
Network planning
City Code
0755
Network planning
MCC
460
Network planning
MNC
04
Network planning
A Interface Tag
GSM_PHASE_2+
Network planning
Um Interface Tag
GSM_PHASE_2+
Network planning
GSM_PHASE_2+
Network planning
NTP Server
192.168.88.100
BSC Subrack
Combination Type
BM/TC Separate
Network planning
Software Parameter
PCU Type
Inner
Outer
Huawei Confidential
Network planning
Page 20
Example
Source
OSP Name
BSC1-1
OPC (Hex)
0A05
Network planning
Encoding Scheme
14
Network planning
Network Indicator
NATB
Network planning
DSP Name
MSC
DSP (Hex)
0910
Network planning
Huawei Confidential
Page 21
Parameter
Example
Source
STP Name
STPMSC001
STP (Hex)
2B07
Network planning
Protocol
ITU-T
Network planning
Subrack-OSP Mapping
Example
Source
Subrack No.
OSP
0A05
Network planning
Huawei Confidential
Page 22
Parameter
Example
Source
OSP Name
BSC1-1
OPC (Hex)
0A05
Network planning
Network Indicator
NATB
Network planning
DSP Name
MSC
DSP (Hex)
0910
Network planning
OSP
DSP
Huawei Confidential
Page 23
Parameter
Example
Source
MCC
460
Network planning
MNC
04
Network planning
LAC
0559
Network planning
CI
0001
Network planning
Huawei Confidential
Page 24
Basic Data
Parameter
Example
Source
SLC
SLC Send
Timeslot Mask
TS16
CIC Range
0~65535
Rate Type
64kbit/s
A Interface Tag
GSM_PHASE_2+
Network planning
Huawei Confidential
Page 25
Sub Board
Attributes
Port Attributes of
Optical Interface
Board
Parameter
Example
Source
Tributary
Numbering
Huawei Mode
TX J0 Byte
MGW SDH
DEFAULT String
Expect RX J0 Byte
MGW SDH
DEFAULT String
TX J1 Byte
MGW SDH
DEFAULT String
Expect RX J1 Byte
MGW SDH
DEFAULT String
TX J2 Byte
MGW SDH
DEFAULT String
Expect RX J2 Byte
MGW SDH
DEFAULT String
TX Frame Format
DOUBLE_FRAME
DOUBLE_FRAME
RX Frame Format
Huawei Confidential
Page 26
Note:
The examples given in
section2 are all based
on the negotiated
data of Table 1~8 in
section 1. The BSC
hardware data
configuration is based
on the typical
configuration, as
shown in the right
figure.
Huawei Confidential
Page 27
Huawei Confidential
Page 28
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Links
Configure
BSC Devices
Configure
Clock
Configure
Subrack-OSP Mapping
Configure
BTS Data
End
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 29
Configure
BSC Attributes
MOD BSCBASIC
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
End
Huawei Confidential
Page 30
MOD BSCBASIC: < NAME >< Area Code >< CC >< MCC >< MNC ><
AVER >< UMVER >< ABISVER >< SPPRTCB ><
SUPPORTVOICETFO >< HIFREQBANDSUPPORT >< NTPSRV >
Huawei Confidential
Page 31
Huawei Confidential
Page 32
Huawei Confidential
Page 33
Huawei Confidential
Page 34
Add OSP
ADD OPC
Add DSP
ADD N7DPC
Add STP
ADD STP
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
End
Huawei Confidential
Page 35
Add OSP
ADD OPC: < NAME >< OPC >< NETSTRUCT >< NI >
Huawei Confidential
Page 36
Add OSP
0: Active internationally
1: Standby internationally
2: Active nationally
3: Standby nationally
Huawei Confidential
Page 37
Add DSP
ADD N7DPC: < NAME >< DPC >< DPCGIDX >< USESTP > < PROT
>< MSCCAP >< MNC >< CNID >< MSCSTATUE >
Huawei Confidential
Page 38
Add DSP
Huawei Confidential
Page 39
Add STP
Huawei Confidential
Page 40
Add STP
If the network indicator of the configured signaling point is 0, the value of the STP code
ranges from 0x1 to 0xFFFFF1 when the STP code is expressed in 24 bits; the value of
the STP code ranges from 0x1 to 0x03FF1 when the STP code is expressed in 14 bits.
If the network indicator of the configured signaling point is not 0, the value of the STP
code ranges from 0x1 to 0xFFFFFF when the STP code is expressed in 24 bits; the
value of the STP code ranges from 0x1 to 0x03FFF when the STP code is expressed in
14 bits.
Huawei Confidential
Page 41
Add STP
Huawei Confidential
Page 42
Add Subrack
Add Power
Distribution Box
ADD BSCCAB
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
ADD BSCSUBRACK
ADD BSCPWR
ADD BRD
End
Huawei Confidential
Page 43
Example:
ADD BSCCAB: CABNO=1, CABType=YES;
Huawei Confidential
Page 44
Huawei Confidential
Page 45
Example:
Huawei Confidential
Page 46
Example:
ADD BSCPWR: CABNO=0, MasterSRN=0;
Huawei Confidential
Page 47
ADD BRD:< SRN >< SN >< BT >< WORKMODE >< BackType >
This command cannot be used to add the following boards: GTNU, GSCU, GGCU
and GOMU. These boards are added with the subrack at the same time.
Huawei Confidential
Page 48
Example:
ADD BRD: SRN=0, SN=0, BT=GXPUM, BackType=OUTPEER;
ADD BRD: SRN=0, SN=16, BT=GOIUT, WorkMode=E1, BackType=OUTPEER;
Huawei Confidential
Page 49
Note: If the ports on GSCU panel are used, you must enable them by
command MOD SCUPORT.
Huawei Confidential
Page 50
Configure
Subrack-OSP
Mapping
ADD SROSPMAP
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
End
Huawei Confidential
Page 51
One BM subrack can only be configured with one signaling point. TC subrack cannot be
configured.
This parameter indicates the subrack number. Only the BM subracks can be configured with
signaling point (SP) relation.
Huawei Confidential
Page 52
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
Configure Subrack
Communication
Link
ADD SRCONPATH
End
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 53
ADD SRCONPATH: < SRN1 >< SRN2 >< TDMN1 >< TDMN2 >
Two connection paths in the different subrack cannot be connected to the same HW
number of the same subrack.
The two ports of the connection paths in the same subrack cannot both be connected to
the same subrack.
Connection paths between subracks can only be connected to the subracks of the
same type.
At most two connection paths between subracks can be configured in between the two
same subracks.
This parameter indicates the subrack number at one end of the subrack communication path.
Huawei Confidential
Page 54
Each subrack has six TDM numbers, ranging from 0 to 5. This parameter indicates the
TDM number of subrack 1.
Each subrack has six TDM numbers, ranging from 0 to 5. This parameter indicates the
TDM number of subrack 2.
Example:
ADD SRCONPATH: SRN1=0, SRN2=1, TDMN1=0, TDMN2=0;
Huawei Confidential
Page 55
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
Configure Ater
Connection Path
ADD ATERCONPATH
ADD ATEROML
ADD ATERSL
Configure A
Interface E1
ADD AE1T1
Configure SS7
Signaling Link
ADD N7LNK
End
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 56
ADD ATERCONPATH: < ATERPIDX >< BMSRN >< BMSN >< BMPN ><
TCSRN >< TCSN >< TCPN >
Huawei Confidential
Page 57
This parameter indicates the number of the port on the specified GEIUT or GOIUT in a
BM subrack connected to a TC subrack.
Huawei Confidential
Page 58
Example:
ADD ATERCONPATH: ATERPIDX=1, BMSRN=0, BMSN=16, BMPN=1, TCSRN=1,
TCSN=16, TCPN=1;
Huawei Confidential
Page 59
The GTCS subrack can be configured with the Ater operation and maintenance link
only in the remote end.
Before configuring the Ater operation and maintenance link, you need to configure
the Ater connection path first.
The ports connected by the Ater connection path used for Ater maintenance and
operation link must range from 0 through 31.
At most two Ater maintenance and operation links can be configured in the whole
system.
Huawei Confidential
Page 60
Huawei Confidential
Page 61
This parameter indicates which timeslots in the ports connected with Ater connection
paths are used for Ater OML.
Value range: TS0~0, TS1~1, TS2~2, TS3~3, TS4~4, TS5~5, , TS29~29, TS30~30,
TS31~31
Example:
ADD ATEROML: ATERPIDX=0, TSMASK=TS2-1&TS3-1&TS4-1&TS5-1&TS61&TS7-1&TS8-1&TS9-1&TS10-1&TS11-1&TS12-1&TS13-1&TS14-1&TS151&TS16-1;
Huawei Confidential
Page 62
ADD ATERSL: < ATERPIDX >< TSNO >< TNMODE >< CGST >< CGET ><
WS >
The Ater signaling link can be configured only when the GTCS subrack is
configured in the remote subrack.
Before configuring the signaling link, you must configure the Ater connection path
first.
For the single GEIUT/GOIUT board in the BM subrack, the time slots used for Ater
signaling link cannot be more than eight.
The CongestionStart of the Ater signaling link must be higher or equal to the
CongestionEnd.
Huawei Confidential
Page 63
ADD ATERSL: < ATERPIDX >< TSNO >< TNMODE >< CGST >< CGET ><
WS >
This parameter indicates the number of the E1/T1 timeslot that is seized by the
configured Ater signaling link.
The Ater signaling link has two transmission modes: terrestrial transmission and satellite
transmission. Satellite transmission is generally used in the areas that are inconvenient
for terrestrial transmission, such as deserts or lakes.
Huawei Confidential
Page 64
This parameter indicates the start threshold of congestion, which is also referred to as
start threshold of flow control.
Recommended value: 90
This parameter indicates the end threshold of congestion, which is also referred to as end
threshold of flow control.
Huawei Confidential
Page 65
Recommended value: 60
This parameter indicates the size of a slide window for the Ater signaling link.
Recommended value: 16
Example:
ADD ATERSL: ATERPIDX=2, TSNO=2, TNMODE=TRRS;
Huawei Confidential
Page 66
ADD AE1T1: < SRN >< SN >< PN >< STCIC >< DPCGIDX >< ALLTSTYPE >
Before running the command, you need to configure the GEIUA or GOIUA board.
The CICs of the E1/T1 time slot of two A interfaces with the same original signaling
point and the same DPC number must be different from each other. Running the
command in the actual configuration often fails because of violating this rule. In this
case, you need to adjust the STCIC parameter to ensure it will not conflict with the
CIC of the E1/T1 time slot of other A interface.
Huawei Confidential
Page 67
ADD AE1T1: < SRN >< SN >< PN >< STCIC >< DPCGIDX >< ALLTSTYPE >
Recommended value: 16
Huawei Confidential
Page 68
This parameter indicates the number of the start CIC. If you run the ADD AE1T1
command, the CIC of each timeslot is automatically calculated based on this parameter. If
the start CIC is set to 100, the CICs of the timeslots on the E1 links over the A interface
are automatically set to 100, 101, 102, 103, and so on. If the CIC of a timeslot equals
65535, the CICs of the following timeslots are set to 65535.
Huawei Confidential
Page 69
This parameter indicates the timeslot type. ALLCIC indicates the types of all the timeslots
on the E1/T1 links over the A interface are CIC. ALLNULL indicates the types of all the
timeslots on the E1/T1 links over the A interface are NULL.
Huawei Confidential
Page 70
Huawei Confidential
Page 71
ADD N7LNK: < SERVICEMODE >< ATERPIDX >< ASN >< APN ><
ATSMASK >< ATERTSMASK >< XPUSLOTNO >< CPUNO >< SLC ><
SLCSEND >< DPC >< STPC >< LKRATE >< STFLG >
The time slot No. of A interface must be the same with that of Ater interface.
The selected DSP must be one of the DSP group to which the E1/T1 of A interface
belongs.
If the selected DSP is indirect, you must select an STP.
Whether the rate type of the connection path is the same with that of the BM
subrack (so is the BM subrack connection path rate connecting the same OSP).
Each pair of signaling points (each link set) can be configured with at most 16 links.
The satellite links cannot be 2M.
Huawei Confidential
Page 72
ADD N7LNK: < SERVICEMODE >< ATERPIDX >< ASN >< APN >< ATSMASK
>< ATERTSMASK >< XPUSLOTNO >< CPUNO >< SLC >< SLCSEND >< DPC
>< STPC >< LKRATE >< STFLG >
Huawei Confidential
Page 73
ADD N7LNK: < SERVICEMODE >< ATERPIDX >< ASN >< APN ><
ATSMASK >< ATERTSMASK >< XPUSLOTNO >< CPUNO >< SLC ><
SLCSEND >< DPC >< STPC >< LKRATE >< STFLG >
Value range: TS0~0, TS1~1, TS2~2, TS3~3, TS4~4, TS5~5, , TS29~29, TS30~30,
TS31~31
Huawei Confidential
Page 74
Value range: TS0~0, TS1~1, TS2~2, TS3~3, TS4~4, TS5~5, , TS28~28, TS29~29,
TS30~30, TS31~31
Huawei Confidential
Page 75
Recommended value: NO
Huawei Confidential
Page 76
Configure
BSC Attributes
Configure Subrack
Communication Link
Configure
SS7 Signaling Points
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
ADD LINECLK
Configure 8K
Reference
Clock
MOD SCUCLK
Configure Line
Clock
ADD LINECLK
Configure
System Clock
ADD CLKSRC
Configure 8K
Reference
Clock
MOD SCUCLK
Configure 8K
Reference
Clock
MOD SCUCLK
GTCS
GMPS
End
Configure Line
Clock
GEPS
Huawei Confidential
Page 77
ADD LINECLK: < SRN >< SN >< LINENO >< PN >< BAKPN >
For the electrical interface board, the line lock of the GMPS subrack can only be
configured in the Ater connection path. The GEPS subrack is not allowed to be
configured with the line clock. The line clock of the GTCS can only be configured in
E1 port of A interface.
For the optical interface board, you can configure the line clock only when the
GMPS subrack has been configured with the GOIUT board. The GEPS subrack is
not allowed to be configured with the line clock. You can configure the line lock only
when the GTCS subrack is configured with the GOIUA board. The line clock of the
optical interface board can only be configured on port 0.
Huawei Confidential
Page 78
ADD LINECLK: < SRN >< SN >< LINENO >< PN >< BAKPN >
Example:
ADD LINECLK: SRN=1, SN=18, LINENO=LINE0, PN=0, BakPN=1;
Huawei Confidential
Page 79
Huawei Confidential
Page 80
Example:
ADD CLKSRC: SRCTYPE=BITS0, SRCSUBTYPE=2M_HZ, PRIORITY=2;
ADD CLKSRC: SRCTYPE=LINE0, SRCSUBTYPE=8K_HZ, PRIORITY=1;
Huawei Confidential
Page 81
Huawei Confidential
Page 82
Example:
MOD SCUCLK: SRN=0, RefClk=GGCU_BACK;
MOD SCUCLK: SRN=1, RefClk=GGCU_FACE;
MOD SCUCLK: SRN=3, RefClk=LINE_CLOCK;
Huawei Confidential
Page 83
Configure
BSC Attributes
Configure
SS7 Signaling Points
ADD BTS
Add BTS
Configure Subrack
Communication Link
MOD BTSBRDFREQ
Add Cell
ADD CELL
ADD BTSBRD
ADD TRX
Add Site
Antenna Feeder
ADD ANTFEEDER
Configure
BSC Devices
Configure Clock
Configure
Subrack-OSP Mapping
End
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
MOD ANTFEEDER
Page 84
Add BTS
ADD BTS:< BTSNAME >< TYPE >< UPNODE > {< SRN >< SN >< PN >} | {<
FBTSNAME >< FPN >} < BTSDESC >< MPMODE >< FLEXABISMODE ><
ABISBYPASSMODE >< SERVICEMODE > { NULL | < INPORT > | < IP ><
IPMASK >} < DCNAME >< DCTYPE >< DCMCC >< DCMNC >< DCLAC ><
DCCI >< CPLMODE >< TRXBN >{< TRXTP >< TRXPN > | NULL }< FREQ >
The port on the selected GE(O)IUB or the selected BTS is available and idle.
Huawei Confidential
Page 85
Add BTS
Huawei Confidential
Page 86
Add BTS
Huawei Confidential
Page 87
Add BTS
Huawei Confidential
Page 88
Add BTS
Huawei Confidential
Page 89
Add BTS
Huawei Confidential
Page 90
Add BTS
Example:
ADD BTS: BTSNAME="10", TYPE=BTS3012, UPNODE=BSC, SRN=0, SN=18,
PN=0, MPMODE=MODE4_1, FlexAbisMode=FIX_ABIS, AbisByPassMode=FALSE,
ServiceMode=TDM, DCNAME="10", DCTYPE=GSM900, DCMCC=460,
DCMNC=04, DCLAC=H'0559, DCCI=0001, CPLMode=SUPPORT, TRXBN=0,
TRXTP=DTRU, TRXPN=0, FREQ=26;
Huawei Confidential
Page 91
MOD BTSBRDFREQ: < IDXTYPE > {< BTSIDX > | < BTSNAME >} < SRN ><
SN >< FREQBAND >
Huawei Confidential
Page 92
Example:
MOD BTSBRDFREQ: IDXTYPE=BYIDX, BTSIDX=0, SRN=3, SN=4,
FREQBAND=PGSM900;
Huawei Confidential
Page 93
Add Cell
ADD CELL:< IDXTYPE > {< BTSIDX > | < BTSNAME >} < CNAME >< CTYPE ><
AST >< MCC >< MNC >< LAC >< CI >< TRXBN >< TRXTP >< TRXPN1 >< FREQ
>< NEEDCHAIN > { NULL | < INPN >< SRN >< SN >< PN > | < INPN >< FPN > | <
OUTPN >< INPN >} < COMCAB > { NULL | < CNT >}
Huawei Confidential
Page 94
Add Cell
ADD CELL:< IDXTYPE > {< BTSIDX > | < BTSNAME >} < CNAME ><
CTYPE >< AST >< MCC >< MNC >< LAC >< CI >< TRXBN >< TRXTP ><
TRXPN1 >< FREQ >< NEEDCHAIN > { NULL | < INPN >< SRN >< SN >< PN
> | < INPN >< FPN > | < OUTPN >< INPN >} < COMCAB > { NULL | < CNT >}
If the used TRX Number is large, you need to add a sublink or an inner connection.
Only the BTS with the type of BTS3012 or BTS3012II supports the hybrid cabinet
group function.
Huawei Confidential
Page 95
Add Cell
Huawei Confidential
Page 96
Add Cell
Huawei Confidential
Page 97
Add Cell
Huawei Confidential
Page 98
ADD BTSBRD: < IDXTYPE > {< BTSIDX > | < BTSNAME >} < SRN >< SN
>< CNT >< BT >
Huawei Confidential
Page 99
Example:
ADD BTSBRD: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=1, CNT=BTS3012,
BT=DTMU;
Huawei Confidential
Page 100
ADD TRX:< IDXTYPE > {< CELLIDX > | < CELLNAME >} < TRXBN >< TRXTP
>< TRXPN1 >< FREQ >< NEEDCHAIN > { NULL | < INPN >< SRN >< SN >< PN
> | < INPN >< FPN > | < OUTPN >< INPN >} < COMCAB > { NULL | < CNT >}
TRX Number and TRX Frequency are mandatory parameters. Cell Index and Cell
Name are alternative.
Only the BTS with the type of BTS3012 or BTS3012II supports the hybrid cabinet
group function.
Huawei Confidential
Page 101
Example:
ADD TRX: IDXTYPE=BYIDX, CELLIDX=0, TRXBN=3, TRXTP=DTRU, TRXPN1=0,
FREQ=45, NEEDCHAIN=NO, COMCAB=NO;
Huawei Confidential
Page 102
ADD ANTFEEDER:< IDXTYPE > {< BTSIDX > | < BTSNAME >} < SRN >< SN ><
CNT >{ < BT1 > | < BT2 > | < BT3 > | < BT4 >}< DTRX >< DTRXBN > < DTRXPN
>{< AORB1 > | < AORB2 > | < AORB3 >} { NULL | < DMDUA > | < DMDUB >}
Huawei Confidential
Page 103
Huawei Confidential
Page 104
Example:
ADD ANTFEEDER: IDXTYPE=BYIDX, BTSIDX=0, CNT=BTS3012,
BT2=DDPM_DDPU, SRN=3, SN=4, DTRX=1, DTRXBN=0, AORB2=A;
Huawei Confidential
Page 105
MOD ANTFEEDER:< IDXTYPE > {< BTSIDX > | < BTSNAME >} < SRN ><
SN >< BT > { NULL | < DTRX1 > | < DTRX2 > | < DTRX3 >} { NULL | <
DTRXMAP1 > | < DTRXMAP2 > | < DTRXMAP3 >} { NULL | < AORB1 > | <
AORB2 >} { NULL | < DMDUA > | < DMDUB >} < UNO >< UTRX ><
UTRXBN >< UTRXBPN > { NULL | < UTOW >} { NULL | < UGEN >} { NULL |
< NEWBT1 > | < NEWBT2 >} { NULL | < ANTFREQBAND >}
Huawei Confidential
Page 106
Huawei Confidential
Page 107
DTRX1: Down TRX1 No., value range: 1~1, 2~2, 3~3, , 12~12
DTRX2: Down TRX2 No., value range: 1~1, 2~2, 3~3, , 12~12
DTRX3: Down TRX3 No., value range: 1~1, 2~2, 3~3, , 12~12
Huawei Confidential
Page 108
Huawei Confidential
Page 109
Huawei Confidential
Page 110
Example:
MOD ANTFEEDER: IDXTYPE=BYIDX, BTSIDX=0, SRN=3, SN=4,
BT=DDPM_DDPU, UNO=0, UTRX=1, UTRXBN=0;
Huawei Confidential
Page 111
Local.txt
Remote.txt
Huawei Confidential
Page 112
Thank You
www.huawei.com