You are on page 1of 10

INSTITUTE OF TECHNOLOGY FROM LAZARO CARDENAS

PARTS OF AN ALTERNATOR

BY:
ADRIANA LÓPEZ CASTAÑEDA

CAREER:
ELECTROMECHANICAL ENGINEERING

DECEMBER 2017
CONTENTS
Pulley Bearings Bearings Rectifier
Shield

Shield Rotor Stator Regulator

2
PULLEY

The alternator pulley


improves internal
combustion engine.

Alternator Pulleys.
Figure 1
http://www.jcrsupplies.co.uk.
3
ROTOR

The rotor consists of a coil


of wire wrapped around
the core.

Rotor.
Figure 2
http://www.jcrsupplies.co.uk.
4
STATOR

Another set of coils


surrounding the rotor are
called stator.

Stator.
Figure 3
http://www.jcrsupplies.co.uk.
5
BEARINGS

The bearing housing is


constructed in two ribbed
parts providing considerable
heat extraction potential.

Bearings.
Figure 4
http://www.jcrsupplies.co.uk.

6
SHIELD

A shield is a set of hard and


resistant parts, that
protects the internal parts
of the alternator.

Shield.
Figure 5
http://www.jcrsupplies.co.uk.
7
REGULATOR

The regulator uses the


control voltage input to
control the amount of field
current.

Regulator.
Figure 6
http://www.jcrsupplies.co.uk.
8
RECTIFIER

The rectifier consist six


diodes, one pair for each
winding.

Rectifier diode pack.


Figure 7
http://www.jcrsupplies.co.uk.

9
INSTITUTE OF TECHNOLOGY FROM LAZARO CARDENAS

PARTS OF AN ALTERNATOR

BY:
ADRIANA LÓPEZ CASTAÑEDA

CAREER:
ELECTROMECHANICAL ENGINEERING

DECEMBER 2017

You might also like